Download or read book Groundwater Assessment Modeling and Management written by M. Thangarajan and published by CRC Press. This book was released on 2016-09-15 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your Guide to Effective Groundwater Management Groundwater Assessment, Modeling, and Management discusses a variety of groundwater problems and outlines the solutions needed to sustain surface and ground water resources on a global scale. Contributors from around the world lend their expertise and provide an international perspective on groundwater management. They address the management of groundwater resources and pollution, waste water treatment methods, and the impact of climate change on groundwater and water availability (specifically in arid and semi-arid regions such as India and Africa). Incorporating management with science and modeling, the book covers all areas of groundwater resource assessment, modeling, and management, and combines hands-on applications with relevant theory. For Water Resource Managers and Decision Makers The book describes techniques for the assessment of groundwater potential, pollution, prevention, and remedial measures, and includes a new approach for groundwater modeling based on connections (network theory). Approximately 30 case studies and six hypothetical studies are introduced reflecting a range of themes that include: groundwater basics and the derivation of groundwater flow equations, exploration and assessment, aquifer parameterization, augmentation of aquifer, water and environment, water and agriculture, the role of models and their application, and water management policies and issues. The book describes remote sensing (RS) applications, geographical information systems (GIS), and electrical resistivity methods to delineate groundwater potential zones. It also takes a look at: Inverse modeling (pilot-points method) Simulation optimization models Radionuclide migration studies through mass transport modeling Modeling for mapping groundwater potential Modeling for vertical 2-D and 3-D groundwater flow Groundwater Assessment, Modeling, and Management explores the management of water resources and the impact of climate change on groundwater. Expert contributors provide practical information on hydrologic engineering and groundwater resources management for students, researchers, scientists, and other practicing professionals in environmental engineering, hydrogeology, irrigation, geophysics, and environmental science.

Download or read book The Application of Science in Environmental Impact Assessment written by Aaron J. MacKinnon and published by Routledge. This book was released on 2018-01-12 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book charts the history of the application of science in environmental impact assessment (EIA) and provides a conceptual and technical overview of scientific developments associated with EIA since its inception in the early 1970s. The Application of Science in Environmental Impact Assessment begins by defining an appropriate role for science in EIA. From here it goes on to reflect more closely on empirical and deductive biophysical sciences as they relate to well-known stages of the generic EIA process and explores whether scientific theory and practice are at their vanguard in EIA and related applications. Throughout the book the authors reflect on biophysical science as it applies to stages of the EIA process and also consider debates surrounding the role of science as it relates to political and administrative dimensions of EIA. Based on this review, the book concludes that improvements to the quality of science in EIA will rely on the adoption of stronger participatory and collaborative working arrangements. Covering key topics including foundational scientific guidance materials; frameworks for implementing science amid conflict and uncertainty; and emerging ecological concepts, this book will be of great interest to students, scholars and practitioners of EIA.

Download or read book Geological Carbon Storage written by Stéphanie Vialle and published by John Wiley & Sons. This book was released on 2018-11-12 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geological Carbon Storage Subsurface Seals and Caprock Integrity Seals and caprocks are an essential component of subsurface hydrogeological systems, guiding the movement and entrapment of hydrocarbon and other fluids. Geological Carbon Storage: Subsurface Seals and Caprock Integrity offers a survey of the wealth of recent scientific work on caprock integrity with a focus on the geological controls of permanent and safe carbon dioxide storage, and the commercial deployment of geological carbon storage. Volume highlights include: Low-permeability rock characterization from the pore scale to the core scale Flow and transport properties of low-permeability rocks Fundamentals of fracture generation, self-healing, and permeability Coupled geochemical, transport and geomechanical processes in caprock Analysis of caprock behavior from natural analogues Geochemical and geophysical monitoring techniques of caprock failure and integrity Potential environmental impacts of carbon dioxide migration on groundwater resources Carbon dioxide leakage mitigation and remediation techniques Geological Carbon Storage: Subsurface Seals and Caprock Integrity is an invaluable resource for geoscientists from academic and research institutions with interests in energy and environment-related problems, as well as professionals in the field.

Download or read book Handbook on Present Environmental challenges An overview written by Dr. Subhajit Mukherjee and published by Book Rivers. This book was released on 2022-06-29 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Fossil Fuel Revolution written by Daniel J. Soeder and published by Elsevier. This book was released on 2019-08-06 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fossil Fuel Revolution: Shale Gas and Tight Oil describes the remarkable new energy resources being obtained from shale gas and tight oil through a combination of directional drilling and staged hydraulic fracturing, opening up substantial new energy reserves for the 21st Century. The book includes the history of shale gas development, the technology used to economically recover hydrocarbons, and descriptions of the ten primary shale gas resources of the United States. International shale resources, environmental concerns, and policy issues are also addressed. This book is intended as a reference on shale gas and tight oil for industry members, undergraduate and graduate students, engineers and geoscientists. - Provides a cross-cutting view of shale gas and tight oil in the context of geology, petroleum engineering, and the practical aspects of production - Includes a comprehensive description of productive and prospective shales in one book, allowing readers to compare and contrast production from different shale plays - Addresses environmental and policy issues and compares alternative energy resources in terms of economics and sustainability - Features an extensive resource list of peer-reviewed references, websites, and journals provided at the end of each chapter

Download or read book Fracking and the Environment written by Daniel J. Soeder and published by Springer Nature. This book was released on 2020-11-11 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic scientific approach to the understanding of hydraulic fracturing (fracking) as a hydrocarbon extraction technology and its impact on the environment. The book addresses research from the past decade to assess how fracking can affect air, water, landscapes and ecosystems, and presents the subject in the context of the history of fracking and shale gas development in the United States, describing what is known and not known about environmental impacts, and the broader implications of fossil energy use, climate change, and technology development. In 9 chapters, the author lays out how and why hydraulic fracturing was developed, what driving forces existed at the beginning of the so-called "shale revolution", how success was achieved, and when and why public acceptance of the technology changed. The intended audience is scientific people who are concerned about fracking, but perhaps do not know all that much about it. It is also intended for lay people who would be interested in understanding the technical details of the process and what effects it might or might not be having on the environment. The book is written at a level that is both understandable and technically correct. A further goal is to give some useful insights even to experienced petroleum geologists and engineers who have been doing fracking for many years.

Download or read book Sustainability Applied to Unconventional Oil and Gas Field Exploration and Development written by Armacanqui, Jesus Samuel and published by IGI Global. This book was released on 2024-07-17 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the evolving environment of energy extraction, the conventional mindset that prioritizes profitability at the expense of safety and environmental concerns is becoming increasingly obsolete. The outdated dichotomy between economic gains and ecological responsibility not only risks environmental incidents but also undermines corporate standing and shared values. With stringent Environmental, Social, and Governance (ESG) requirements and energy transition imperatives, oil and gas operators in unconventional Fields face the challenge of navigating a web of compliance and sustainability mandates. There is a need for a paradigm shift, a comprehensive framework that integrates profitability, technological efficacy, and ecological compatibility for the sustainable exploration, development, and operation of unconventional oil and gas fields. Sustainability Applied to Unconventional Oil and Gas Field Exploration and Development, is a groundbreaking book designed to usher in this paradigm shift. This work presents a robust life cycle concept, offering a holistic framework that not only breaks free from the archaic mindset but also propels the industry towards a future where profitability and environmental responsibility are inseparable. The book provides oil and gas operators and the scientific community with a consultative source, delving into specific technologies that promote the swift implementation of economically profitable, technically effective, and ecologically compatible measures. By encouraging problem-solving discussions among stakeholders, including R & D teams, communities, and regulatory bodies, the book envisions a collaborative approach that benefits company stakeholders, local communities, and society at large without compromising the business's bottom line.

Download or read book Modern Shale Gas Development in the United States written by and published by . This book was released on 2009 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.

Download or read book Naturally Fractured Reservoirs written by Roberto Aguilera and published by PennWell Books. This book was released on 1980 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals exclusively with naturally fractured reservoirs and includes many subjects usually treated in separate volumes. A highly practical edition, Naturally Fractured Reservoirs is written for students, reservoir geologists, log analysts and petroleum engineers.

Download or read book Exploitation of Unconventional Oil and Gas Resources written by Kenneth Imo-Imo Israel Eshiet and published by . This book was released on 2019-07-10 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stimulation of unconventional hydrocarbon reservoirs is proven to improve their productivity to an extent that has rendered them economically viable. Generally, the stimulation design is a complex process dependent on intertwining factors such as the history of the formation, rock and reservoir fluid type, lithology and structural layout of the formation, cost, time, etc. A holistic grasp of these can be daunting, especially for people without sufficient experience and/or expertise in the exploitation of unconventional hydrocarbon reserves. This book presents the key facets integral to producing unconventional resources, and how the different components, if pieced together, can be used to create an integrated stimulation design. Areas covered are as follows: • stimulation methods, • fracturing fluids, • mixing and behavior of reservoir fluids, • assessment of reservoir performance, • integration of surface drilling data, • estimation of geomechanical properties and hydrocarbon saturation, and • health and safety. Exploitation of Unconventional Oil and Gas Resources: Hydraulic Fracturing and Other Recovery and Assessment Techniques is an excellent introduction to the subject area of unconventional oil and gas reservoirs, but it also complements existing information in the same discipline. It is an essential text for higher education students and professionals in academia, research, and the industry.

Download or read book Hydraulic Fracture Modeling written by Yu-Shu Wu and published by Gulf Professional Publishing. This book was released on 2017-11-30 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracture Modeling delivers all the pertinent technology and solutions in one product to become the go-to source for petroleum and reservoir engineers. Providing tools and approaches, this multi-contributed reference presents current and upcoming developments for modeling rock fracturing including their limitations and problem-solving applications. Fractures are common in oil and gas reservoir formations, and with the ongoing increase in development of unconventional reservoirs, more petroleum engineers today need to know the latest technology surrounding hydraulic fracturing technology such as fracture rock modeling. There is tremendous research in the area but not all located in one place. Covering two types of modeling technologies, various effective fracturing approaches and model applications for fracturing, the book equips today's petroleum engineer with an all-inclusive product to characterize and optimize today's more complex reservoirs. - Offers understanding of the details surrounding fracturing and fracture modeling technology, including theories and quantitative methods - Provides academic and practical perspective from multiple contributors at the forefront of hydraulic fracturing and rock mechanics - Provides today's petroleum engineer with model validation tools backed by real-world case studies

Download or read book Induced Seismicity Potential in Energy Technologies written by National Research Council and published by National Academies Press. This book was released on 2013-08-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past several years, some energy technologies that inject or extract fluid from the Earth, such as oil and gas development and geothermal energy development, have been found or suspected to cause seismic events, drawing heightened public attention. Although only a very small fraction of injection and extraction activities among the hundreds of thousands of energy development sites in the United States have induced seismicity at levels noticeable to the public, understanding the potential for inducing felt seismic events and for limiting their occurrence and impacts is desirable for state and federal agencies, industry, and the public at large. To better understand, limit, and respond to induced seismic events, work is needed to build robust prediction models, to assess potential hazards, and to help relevant agencies coordinate to address them. Induced Seismicity Potential in Energy Technologies identifies gaps in knowledge and research needed to advance the understanding of induced seismicity; identify gaps in induced seismic hazard assessment methodologies and the research to close those gaps; and assess options for steps toward best practices with regard to energy development and induced seismicity potential.

Download or read book Reservoir Stimulation written by Michael J. Economides and published by . This book was released on 2000-06-23 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets forth a rationalisation of stimulation using reservoir engineering concepts, and addresses topics such as formation characterisation, hydraulic fracturing and matrix acidizing. Formation damage, which refers to a loss in reservoir productivity, is also examined comprehensively.

Download or read book Geological Carbon Storage written by Stéphanie Vialle and published by John Wiley & Sons. This book was released on 2018-11-15 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geological Carbon Storage Subsurface Seals and Caprock Integrity Seals and caprocks are an essential component of subsurface hydrogeological systems, guiding the movement and entrapment of hydrocarbon and other fluids. Geological Carbon Storage: Subsurface Seals and Caprock Integrity offers a survey of the wealth of recent scientific work on caprock integrity with a focus on the geological controls of permanent and safe carbon dioxide storage, and the commercial deployment of geological carbon storage. Volume highlights include: Low-permeability rock characterization from the pore scale to the core scale Flow and transport properties of low-permeability rocks Fundamentals of fracture generation, self-healing, and permeability Coupled geochemical, transport and geomechanical processes in caprock Analysis of caprock behavior from natural analogues Geochemical and geophysical monitoring techniques of caprock failure and integrity Potential environmental impacts of carbon dioxide migration on groundwater resources Carbon dioxide leakage mitigation and remediation techniques Geological Carbon Storage: Subsurface Seals and Caprock Integrity is an invaluable resource for geoscientists from academic and research institutions with interests in energy and environment-related problems, as well as professionals in the field.

Download or read book Characterization Modeling Monitoring and Remediation of Fractured Rock written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2021-01-29 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractured rock is the host or foundation for innumerable engineered structures related to energy, water, waste, and transportation. Characterizing, modeling, and monitoring fractured rock sites is critical to the functioning of those infrastructure, as well as to optimizing resource recovery and contaminant management. Characterization, Modeling, Monitoring, and Remediation of Fractured Rock examines the state of practice and state of art in the characterization of fractured rock and the chemical and biological processes related to subsurface contaminant fate and transport. This report examines new developments, knowledge, and approaches to engineering at fractured rock sites since the publication of the 1996 National Research Council report Rock Fractures and Fluid Flow: Contemporary Understanding and Fluid Flow. Fundamental understanding of the physical nature of fractured rock has changed little since 1996, but many new characterization tools have been developed, and there is now greater appreciation for the importance of chemical and biological processes that can occur in the fractured rock environment. The findings of Characterization, Modeling, Monitoring, and Remediation of Fractured Rock can be applied to all types of engineered infrastructure, but especially to engineered repositories for buried or stored waste and to fractured rock sites that have been contaminated as a result of past disposal or other practices. The recommendations of this report are intended to help the practitioner, researcher, and decision maker take a more interdisciplinary approach to engineering in the fractured rock environment. This report describes how existing tools-some only recently developed-can be used to increase the accuracy and reliability of engineering design and management given the interacting forces of nature. With an interdisciplinary approach, it is possible to conceptualize and model the fractured rock environment with acceptable levels of uncertainty and reliability, and to design systems that maximize remediation and long-term performance. Better scientific understanding could inform regulations, policies, and implementation guidelines related to infrastructure development and operations. The recommendations for research and applications to enhance practice of this book make it a valuable resource for students and practitioners in this field.

Download or read book Rock Fractures and Fluid Flow written by National Research Council and published by National Academies Press. This book was released on 1996-08-27 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific understanding of fluid flow in rock fracturesâ€"a process underlying contemporary earth science problems from the search for petroleum to the controversy over nuclear waste storageâ€"has grown significantly in the past 20 years. This volume presents a comprehensive report on the state of the field, with an interdisciplinary viewpoint, case studies of fracture sites, illustrations, conclusions, and research recommendations. The book addresses these questions: How can fractures that are significant hydraulic conductors be identified, located, and characterized? How do flow and transport occur in fracture systems? How can changes in fracture systems be predicted and controlled? Among other topics, the committee provides a geomechanical understanding of fracture formation, reviews methods for detecting subsurface fractures, and looks at the use of hydraulic and tracer tests to investigate fluid flow. The volume examines the state of conceptual and mathematical modeling, and it provides a useful framework for understanding the complexity of fracture changes that occur during fluid pumping and other engineering practices. With a practical and multidisciplinary outlook, this volume will be welcomed by geologists, petroleum geologists, geoengineers, geophysicists, hydrologists, researchers, educators and students in these fields, and public officials involved in geological projects.