Download or read book Numerical Simulation for Next Generation Thermal Power Plants written by Falah Alobaid and published by Springer. This book was released on 2019-05-01 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides highly specialized researchers and practitioners with a major contribution to mathematical models’ developments for energy systems. First, dynamic process simulation models based on mixture flow and two-fluid models are developed for combined-cycle power plants, pulverised coal-fired power plants, concentrated solar power plant and municipal waste incineration. Operation data, obtained from different power stations, are used to investigate the capability of dynamic models to predict the behaviour of real processes and to analyse the influence of modeling assumptions on simulation results. Then, a computational fluid dynamics (CFD) simulation programme, so-called DEMEST, is developed. Here, the fluid-solid, particle-particle and particle-wall interactions are modeled by tracking all individual particles. To this purpose, the deterministic Euler-Lagrange/Discrete Element Method (DEM) is applied and further improved. An emphasis is given to the determination of inter-phase values, such as volumetric void fraction, momentum and heat transfers, using a new procedure known as the offset-method and to the particle-grid method allowing the refinement of the grid resolution independently from particle size. Model validation is described in detail. Moreover, thermochemical reaction models for solid fuel combustion are developed based on quasi-single-phase, two-fluid and Euler-Lagrange/MP-PIC models. Measurements obtained from actual power plants are used for validation and comparison of the developed numerical models.
Download or read book Numerical Simulation for Next Generation Thermal Power Plants written by Falah Alobaid and published by Springer. This book was released on 2018-03-29 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides highly specialized researchers and practitioners with a major contribution to mathematical models’ developments for energy systems. First, dynamic process simulation models based on mixture flow and two-fluid models are developed for combined-cycle power plants, pulverised coal-fired power plants, concentrated solar power plant and municipal waste incineration. Operation data, obtained from different power stations, are used to investigate the capability of dynamic models to predict the behaviour of real processes and to analyse the influence of modeling assumptions on simulation results. Then, a computational fluid dynamics (CFD) simulation programme, so-called DEMEST, is developed. Here, the fluid-solid, particle-particle and particle-wall interactions are modeled by tracking all individual particles. To this purpose, the deterministic Euler-Lagrange/Discrete Element Method (DEM) is applied and further improved. An emphasis is given to the determination of inter-phase values, such as volumetric void fraction, momentum and heat transfers, using a new procedure known as the offset-method and to the particle-grid method allowing the refinement of the grid resolution independently from particle size. Model validation is described in detail. Moreover, thermochemical reaction models for solid fuel combustion are developed based on quasi-single-phase, two-fluid and Euler-Lagrange/MP-PIC models. Measurements obtained from actual power plants are used for validation and comparison of the developed numerical models.
Download or read book Modeling and Simulation of Thermal Power Plants with ThermoSysPro written by Baligh El Hefni and published by Springer. This book was released on 2019-01-24 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the modelling and simulation of thermal power plants, and introduces readers to the equations needed to model a wide range of industrial energy processes. Also featuring a wealth of illustrative, real-world examples, it covers all types of power plants, including nuclear, fossil-fuel, solar and biomass. The book is based on the authors’ expertise and experience in the theory of power plant modelling and simulation, developed over many years of service with EDF. In more than forty examples, they demonstrate the component elements involved in a broad range of energy production systems, with detailed test cases for each chemical, thermodynamic and thermo-hydraulic model. Each of the test cases includes the following information: • component description and parameterization data; • modelling hypotheses and simulation results; • fundamental equations and correlations, with their validity domains; • model validation, and in some cases, experimental validation; and • single-phase flow and two-phase flow modelling equations, which cover all water and steam phases. A practical volume that is intended for a broad readership, from students and researchers, to professional engineers, this book offers the ideal handbook for the modelling and simulation of thermal power plants. It is also a valuable aid in understanding the physical and chemical phenomena that govern the operation of power plants and energy processes.
Download or read book Computer Simulation of Thermal Plant Operations written by Peter O'Kelly and published by Springer Science & Business Media. This book was released on 2012-11-27 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes thermal plant simulation, that is, dynamic simulation of plants which produce, exchange and otherwise utilize heat as their working medium. Directed at chemical, mechanical and control engineers involved with operations, control and optimization and operator training, the book gives the mathematical formulation and use of simulation models of the equipment and systems typically found in these industries. The author has adopted a fundamental approach to the subject. The initial chapters provide an overview of simulation concepts and describe a suitable computer environment. Reviews of relevant numerical computation methods and fundamental thermodynamics are followed by a detailed examination of the basic conservation equations. The bulk of the book is concerned with development of specific simulation models. Care is taken to trace each model derivation path from the basic underlying physical equations, explaining simplifying and restrictive assumptions as they arise and relating the model coefficients to the physical dimensions and physical properties of the working materials. Numerous photographs of real equipment complement the text and most models are illustrated by numerical examples based on typical real plant operations.
Download or read book Thermochemical Conversion Processes for Solid Fuels and Renewable Energies written by Falah Alobaid and published by MDPI. This book was released on 2021-08-30 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is widely believed that a large proportion of greenhouse gas emissions originated anthropogenically from the use of fossil fuels with additional contributions coming from manufactured materials, deforestation, soil erosion, and agriculture (including livestock). The global society actively supports measures to create a flexible and low-carbon energy economy to attenuate climate change and its devastating environmental consequences. In this Special Issue, the recent advancements in the next-generation thermochemical conversion processes for solid fuels and renewable energies (e.g., the operational flexibility of co-combustion of biomass and lignite, integrated solar combined cycle power plants, and advanced gasification systems such as the sorption-enhanced gasification and the chemical looping gasification) were shown.
Download or read book Numerical Simulations of Physical and Engineering Processes written by Jan Awrejcewicz and published by IntechOpen. This book was released on 2011-09-26 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Simulations of Physical and Engineering Process is an edited book divided into two parts. Part I devoted to Physical Processes contains 14 chapters, whereas Part II titled Engineering Processes has 13 contributions. The book handles the recent research devoted to numerical simulations of physical and engineering systems. It can be treated as a bridge linking various numerical approaches of two closely inter-related branches of science, i.e. physics and engineering. Since the numerical simulations play a key role in both theoretical and application oriented research, professional reference books are highly needed by pure research scientists, applied mathematicians, engineers as well post-graduate students. In other words, it is expected that the book will serve as an effective tool in training the mentioned groups of researchers and beyond.
Download or read book Thermal Power Plants Volume I written by Robin A. Chaplin and published by EOLSS Publications. This book was released on 2009-11-30 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been derived from the work of several professors in the nuclear and power industry all of whom have been directly involved with the industry as managers or consultants. The text has been written as educational material and many of the individual chapters have been written as course material for advanced university courses. Also several chapters include material related to plant operation which is prescribed for operator training. Hence it bridges the gap between academic study and practical training. While it is not intended to be comprehensive in all respects it does provide an overview of the topic with sufficient technical depth for a general understanding of power plant technology and a basis for further study in a particular area. When used as a reference in this way each chapter can stand alone and be read independently of the others. Overall it meets the general philosophy of EOLSS in providing a source of knowledge for sustainable development and technological progress for educators and decision makers.
Download or read book Modelling Simulation and Control of Thermal Energy Systems written by Kwang Y. Lee and published by MDPI. This book was released on 2020-11-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Faced with an ever-growing resource scarcity and environmental regulations, the last 30 years have witnessed the rapid development of various renewable power sources, such as wind, tidal, and solar power generation. The variable and uncertain nature of these resources is well-known, while the utilization of power electronic converters presents new challenges for the stability of the power grid. Consequently, various control and operational strategies have been proposed and implemented by the industry and research community, with a growing requirement for flexibility and load regulation placed on conventional thermal power generation. Against this background, the modelling and control of conventional thermal engines, such as those based on diesel and gasoline, are experiencing serious obstacles when facing increasing environmental concerns. Efficient control that can fulfill the requirements of high efficiency, low pollution, and long durability is an emerging requirement. The modelling, simulation, and control of thermal energy systems are key to providing innovative and effective solutions. Through applying detailed dynamic modelling, a thorough understanding of the thermal conversion mechanism(s) can be achieved, based on which advanced control strategies can be designed to improve the performance of the thermal energy system, both in economic and environmental terms. Simulation studies and test beds are also of great significance for these research activities prior to proceeding to field tests. This Special Issue will contribute a practical and comprehensive forum for exchanging novel research ideas or empirical practices that bridge the modelling, simulation, and control of thermal energy systems. Papers that analyze particular aspects of thermal energy systems, involving, for example, conventional power plants, innovative thermal power generation, various thermal engines, thermal energy storage, and fundamental heat transfer management, on the basis of one or more of the following topics, are invited in this Special Issue: • Power plant modelling, simulation, and control; • Thermal engines; • Thermal energy control in building energy systems; • Combined heat and power (CHP) generation; • Thermal energy storage systems; • Improving thermal comfort technologies; • Optimization of complex thermal systems; • Modelling and control of thermal networks; • Thermal management of fuel cell systems; • Thermal control of solar utilization; • Heat pump control; • Heat exchanger control.
Download or read book Solar Chimney Power Plant Generating Technology written by Tingzhen Ming and published by Academic Press. This book was released on 2016-03-15 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solar Chimney Power Plant Generating Technology presents the latest advanced solar chimney power generating technologies to help engineers acquire a comprehensive understanding of the fundamental theories, technologies, and applications of solar chimney power generating systems. The book includes comprehensive theories, very detailed technologies, and many well-illustrated, basic configurations of different types of systems, enabling readers to understand the fundamental theory, the design methods of solar chimney systems, and the basic parameters of the construction and operation of these systems. - Includes comprehensive theories, very detailed technologies, and many basic configurations of different types of systems - Covers the basic mechanisms of fluid flow, heat transfer, power output, energy storage, and operational procedures of SCPPS (solar chimney power plant system) turbines - Focuses on thermodynamic theory, helio-aero-gravity effect, fluid flow and heat transfer characteristics, design for SC turbine, energy storage, and the effect of ambient crosswinds
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Conversion written by D. Yogi Goswami and published by CRC Press. This book was released on 2007-07-06 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing methods for maximizing available energy, Energy Conversion surveys the latest advances in energy conversion from a wide variety of currently available energy sources. The book describes energy sources such as fossil fuels, biomass including refuse-derived biomass fuels, nuclear, solar radiation, wind, geothermal, and ocean, then provides the terminology and units used for each energy resource and their equivalence. It includes an overview of the steam power cycle, gas turbines, internal combustion engines, hydraulic turbines, Stirling engines, advanced fossil fuel power systems, and combined-cycle power plants. It outlines the development, current use, and future of nuclear fission. The book also gives a comprehensive description of the direct energy conversion methods, including, Photovoltaics, Fuel Cells, Thermoelectric conversion, Thermionics and MHD It briefly reviews the physics of PV electrical generation, discusses the PV system design process, presents several PV system examples, summarizes the latest developments in crystalline silicon PV, and explores some of the present challenges facing the large scale deployment of PV energy sources. The book discusses five energy storage categories: electrical, electromechanical, mechanical, direct thermal, and thermochemical and the storage media that can store and deliver energy. With contributions from researchers at the top of their fields and on the cutting edge of technologies, the book provides comprehensive coverage of end use efficiency of green technology. It includes in-depth discussions not only of better efficient energy management in buildings and industry, but also of how to plan and design for efficient use and management from the ground up.
Download or read book Encyclopedia of Renewable Energy Sustainability and the Environment written by and published by Elsevier. This book was released on 2024-08-09 with total page 4061 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Renewable Energy, Sustainability and the Environment, Four Volume Set comprehensively covers all renewable energy resources, including wind, solar, hydro, biomass, geothermal energy, and nuclear power, to name a few. In addition to covering the breadth of renewable energy resources at a fundamental level, this encyclopedia delves into the utilization and ideal applications of each resource and assesses them from environmental, economic, and policy standpoints. This book will serve as an ideal introduction to any renewable energy source for students, while also allowing them to learn about a topic in more depth and explore related topics, all in a single resource.Instructors, researchers, and industry professionals will also benefit from this comprehensive reference. - Covers all renewable energy technologies in one comprehensive resource - Details renewable energies' processes, from production to utilization in a single encyclopedia - Organizes topics into concise, consistently formatted chapters, perfect for readers who are new to the field - Assesses economic challenges faced to implement each type of renewable energy - Addresses the challenges of replacing fossil fuels with renewables and covers the environmental impacts of each renewable energy
Download or read book Energy Research Abstracts written by and published by . This book was released on 1995 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiscal Year 2001 Budget Authorization Request written by United States. Congress. House. Committee on Science. Subcommittee on Energy and Environment and published by . This book was released on 2001 with total page 2172 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 2nd ASME JSME Nuclear Engineering Joint Conference written by P. F. Peterson and published by . This book was released on 1993 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modular High temperature Gas cooled Reactor Power Plant written by Kurt Kugeler and published by Springer. This book was released on 2018-10-05 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Modular High-temperature Gas-cooled Reactor Power Plant" introduces the power plants driven by modular high temperature gas-cooled reactors (HTR), which are characterized by their inherent safety features and high output temperatures. HTRs have the potential to be adopted near demand side to supply both electricity and process heat, directly replacing conventional fossil fuels. The world is confronted with two dilemmas in the energy sector, namely climate change and energy supply security. HTRs have the potential to significantly alleviate these concerns. This book will provide readers with a thorough understanding of HTRs, their history, principles, and fields of application. The book is intended for researchers and engineers involved with nuclear engineering and energy technology.
Download or read book Advanced Non Thermal Power Generation Systems written by Yatish T. Shah and published by CRC Press. This book was released on 2023-11-08 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generally, sources for power generation are broken down into two categories: thermal and non-thermal. Thermal sources for power generation include combustion, geothermal, solar, nuclear, and waste heat, which essentially provide heat as a means for power generation. This book examines non-thermal (mechanical, electrochemical, nanoscale self-powered, and hybrid) sources of power generation and emphasizes recent advances in distributed power generation systems. Key Features Details recent advances made in wind power, including onshore, offshore, fixed and floating platform, and air wind energy systems, and offers detailed assessments of progress Covers advances in generation of hydropower, exploring dam hydropower, novel wave energy converters, and novel systems and turbines for hydrokinetic energy conversion to power Examines all types of fuel cells and their multi-functional roles, along with hybrid fuel cell systems in complete detail Explores advances in the development of self-powered nanogenerators for use in portable, wearable, and implantable power electronics Focuses on technologies with the best commercial possibilities and provides perspectives on future challenges that need to be solved This book will be of value to all researchers in academia, industry, and government interested in pursuing power generation technologies and seeking a comprehensive understanding of available and emerging non-thermal power generation sources. Readers who are interested in learning about thermal power generation sources can find it in the author’s companion text Advanced Power Generation Systems: Thermal Sources (2023).
