Download or read book Numerical Methods in Thermal Management of Electronic Systems written by and published by . This book was released on 2005 with total page 115 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical methods in thermal management of electronic systemsThis special issue brings together a number of papers dealing with the topic of heatand fluid flow, which are important in the thermal management of electronic systems. As the miniaturization of the electronic systems is proceeding at a rapid rate, thethermal problems are becoming more acute as they affect the performance and thereliability of the product.
Download or read book Thermal Management of Electronic Systems written by C.J. Hoogendoorn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Eurotherm Committee has chosen Thermal Management of Electronic Systems as the subject of its 29th Seminar, at Delft University of Technology, the Netherlands, 14-16 June 1993. This volume constitutes the proceedings of the Seminar. Thermal Management is but one of the several critical topics in the design of electronic systems. However, as a result of the combined effects of increasing heat fluxes, miniaturisation and the striving for zero defects, preferably in less time and at a lower cost than before, thermal management has become an increasingly tough challenge. Therefore, it is being increasingly recognised that cooling requirements could eventually hamper the technical progress in miniaturisation. It might be argued that we are on the verge of a revolution in thermal management techniques. Previously, a packaging engineer had no way of predicting the tempera tures of critical electronic parts with the required accuracy. He or she· had to rely on full-scale experiments, doubtful design rules, or worst-case estimates. This situation is going to be changed in the foreseeable future. User-friendly software tools, the acquisition and integrity of input and output data, the badly needed training mea sures, the introduction into a concurrent engineering environment: all these items will exert a heavy toll on the flexibility of the electronics industries. Fortunately, this situation is being realised at the appropriate management levels, and the interest in this seminar and the pre-conference tutorials testifies to this assertion.
Download or read book Thermal Management of Electronic Systems II written by E. Beyne and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the second time, the Eurotherm Committee has chosen Thermal Managment of Electronic Systems as the subject for its 45th Seminar, held at IMEC in Leuven, Belgium, from 20 to 22 September 1995. After the successfui first edition of this seminar in Delft, June 14-16, 1993, it was decided to repeat this event on a two year basis. This volume constitutes the edited proceedings of the Seminar. Thermal management of electronic systems is gaining importance. Whereas a few years ago papers on this subject where mainly devoted to applications in high end markets, such as mainframes and telecommunication switching equipment, we see a growing importance in the "lower" end applications. This may be understood from the growing impact of electronics on every day life, from car electronics, GSM phones, personal computers to electronic games. These applications add new requirements to the thermal design. The thermal problem and the applicable cooling strategies are quite different from those in high end products. In this seminar the latest developments in many of the different aspects of the thermal design of electronic systems were discussed. Particular attention was given to thermal modelling, experimental characterisation and the impact of thermal design on the reliability of electronic systems.
Download or read book Advances in Numerical Heat Transfer written by W. Minkowycz and published by CRC Press. This book was released on 2000-12-05 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from leading experts, this second volume in the ser ies strikes a balance between generic and specific fundamentals and ge neric and specific applications. After opening with a broad overview o f the field of high-performance scientific computing and its role in f luid flow and heat transfer problems, the book goes on to cover such t opics as: unstructured meshes; spectral element method; use of the fin ite volume method for the numerical solution of radiative heat transfe r problems; heat conduction and the use of the boundary element method for both steady and unsteady problems; special numerical issues relat ed to solving microscale heat transfer problems; the Monte Carlo Metho d; flow and heat transfer in porous media; and the thermal management of electronic systems.
Download or read book Heat Transfer written by Younes Shabany and published by CRC Press. This book was released on 2009-12-17 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuing trend toward miniaturization and high power density electronics results in a growing interdependency between different fields of engineering. In particular, thermal management has become essential to the design and manufacturing of most electronic systems.Heat Transfer: Thermal Management of Electronics details how engineers can use
Download or read book Thermal Management Handbook For Electronic Assemblies written by Jerry E. Sergent and published by McGraw Hill Professional. This book was released on 1998 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The "hands-on" guide to thermal management! In recent years, heat-sensitive electronic systems have been miniaturized far more than their heat-producing power supplies, leading to major design and reliability challenges — and making thermal management a critical design factor. This timely handbook covers all the practical issues that any packaging engineer must consider with regard to the thermal management of printed circuit boards, hybrid circuits, and multichip modules. Readers will also benefit from the extensive data on material properties and circuit functions, thus enabling more intelligent decisions at the design stage — and preventing thermal-related problems from occurring in the first place.
Download or read book Advances in Thermal Modeling of Electronic Components and Systems written by and published by . This book was released on 1998 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Methods for Energy Applications written by Naser Mahdavi Tabatabaei and published by Springer Nature. This book was released on 2021-03-22 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough guide to the use of numerical methods in energy systems and applications. It presents methods for analysing engineering applications for energy systems, discussing finite difference, finite element, and other advanced numerical methods. Solutions to technical problems relating the application of these methods to energy systems are also thoroughly explored. Readers will discover diverse perspectives of the contributing authors and extensive discussions of issues including: • a wide variety of numerical methods concepts and related energy systems applications;• systems equations and optimization, partial differential equations, and finite difference method;• methods for solving nonlinear equations, special methods, and their mathematical implementation in multi-energy sources;• numerical investigations of electrochemical fields and devices; and• issues related to numerical approaches and optimal integration of energy consumption. This is a highly informative and carefully presented book, providing scientific and academic insight for readers with an interest in numerical methods and energy systems.
Download or read book Heat Pipes written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-10-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Pipes, Sixth Edition, takes a highly practical approach to the design and selection of heat pipes, making it an essential guide for practicing engineers and an ideal text for postgraduate students.This new edition has been revised to include new information on the underlying theory of heat pipes and heat transfer, and features fully updated applications, new data sections, and updated chapters on design and electronics cooling. The book is a useful reference for those with experience and an accessible introduction for those approaching the topic for the first time. Contains all information required to design and manufacture a heat pipe Suitable for use as a professional reference and graduate text Revised with greater coverage of key electronic cooling applications
Download or read book Cooling of Electronic Systems written by Sadik Kakaç and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 953 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronic technology is developing rapidly and, with it, the problems associated with the cooling of microelectronic equipment are becoming increasingly complex. So much so that it is necessary for experts in the fluid and thermal sciences to become involved with the cooling problem. Such thoughts as these led to an approach to leading specialists with a request to contribute to the present book. Cooling of Electronic Systems presents the technical progress achieved in the fundamentals of the thermal management of electronic systems and thermal strategies for the design of microelectronic equipment. The book starts with an introduction to the cooling of electronic systems, involving such topics as trends in computer system cooling, the cooling of high performance computers, thermal design of microelectronic components, natural and forced convection cooling, cooling by impinging air and liquid jets, thermal control systems for high speed computers, together with a detailed review of advances in manufacturing and assembly technology. Following this, practical methods for the determination of the parameters required for the thermal analysis of electronic systems and the accurate prediction of temperature in consumer electronics. Cooling of Electronic Systems is currently the most up-to-date book on the thermal management of electronic and microelectronic equipment, and the subject is presented by eminent scientists and experts in the field. Vital reading for all designers of modern, high-speed computers.
Download or read book Encyclopedia Of Thermal Packaging Set 3 Thermal Packaging Applications A 3 volume Set written by Bar-cohen Avram and published by World Scientific. This book was released on 2018-10-15 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal and mechanical packaging — the enabling technologies for the physical implementation of electronic systems — are responsible for much of the progress in miniaturization, reliability, and functional density achieved by electronic, microelectronic, and nanoelectronic products during the past 50 years. The inherent inefficiency of electronic devices and their sensitivity to heat have placed thermal packaging on the critical path of nearly every product development effort in traditional, as well as emerging, electronic product categories.Successful thermal packaging is the key differentiator in electronic products, as diverse as supercomputers and cell phones, and continues to be of pivotal importance in the refinement of traditional products and in the development of products for new applications. The Encyclopedia of Thermal Packaging, compiled in four multi-volume sets (Set 1: Thermal Packaging Techniques, Set 2: Thermal Packaging Tools, Set 3: Thermal Packaging Applications, and Set 4: Thermal Packaging Configurations) provides a comprehensive, one-stop treatment of the techniques, tools, applications, and configurations of electronic thermal packaging. Each of the author-written volumes presents the accumulated wisdom and shared perspectives of a few luminaries in the thermal management of electronics.The four sets in the Encyclopedia of Thermal Packaging will provide the novice and student with a complete reference for a quick ascent on the thermal packaging 'learning curve,' the practitioner with a validated set of techniques and tools to face every challenge, and researchers with a clear definition of the state-of-the-art and emerging needs to guide their future efforts. This encyclopedia will, thus, be of great interest to packaging engineers, electronic product development engineers, and product managers, as well as to researchers in thermal management of electronic and photonic components and systems, and most beneficial to undergraduate and graduate students studying mechanical, electrical, and electronic engineering.Set 3: Thermal Packaging ApplicationsThe third set in the Encyclopedia includes two volumes in the planned focus on Thermal Packaging Applications and a single volume on the use of Phase Change Materials (PCM), a most important Thermal Management Technique, not previously addressed in the Encyclopedia. Set 3 opens with Heat Transfer in Avionic Equipment, authored by Dr Boris Abramzon, offering a comprehensive, in-depth treatment of compact heat exchangers and cold plates for avionics cooling, as well as discussion on recent developments in these heat transfer units that are widely used in the thermal control of military and civilian airborne electronics. Along with a detailed presentation of the relevant thermofluid physics and governing equations, and the supporting mathematical design and optimization techniques, the book offers a practical guide for thermal engineers designing avionics cooling equipment, based on the author's 20+ years of experience as a thermal analyst and a practical design engineer for Avionics and related systems.The Set continues with Thermal Management of RF Systems, which addresses sequentially the history, present practice, and future thermal management strategies for electronically-steered RF systems, in the context of the RF operational requirements, as well as device-, module-, and system-level electronic, thermal, and mechanical considerations. This unique text was written by 3 authors, Dr John D Albrecht, Mr David H Altman, Dr Joseph J Maurer, with extensive US Department of Defense and aerospace industry experience in the design, development, and fielding of RF systems. Their combined efforts have resulted in a text, which is well-grounded in the relevant past, present, and future RF systems and technologies. Thus, this volume will provide the designers of advanced radars and other electronic RF systems with the tools and the knowledge to address the thermal management challenges of today's technologies, as well as of advanced technologies, such as wide bandgap semiconductors, heterogeneously integrated devices, and 3D chipsets and stacks.The third volume in Set 3, Phase Change Materials for Thermal Management of Electronic Components, co-authored by Prof Gennady Ziskind and Dr Yoram Kozak, provides a detailed description of the numerical methods used in PCM analysis and a detailed explanation of the processes that accompany and characterize solid-liquid phase-change in popular basic and advanced geometries. These provide a foundation for an in-depth exploration of specific electronics thermal management applications of Phase Change Materials. This volume is anchored in the unique PCM knowledge and experience of the senior author and placed in the context of the extensive solid-liquid phase-change literature in such diverse fields as material science, mathematical modeling, experimental and numerical methods, and thermofluid science and engineering.
Download or read book Numerical Methods in Heat Transfer written by Roland W. Lewis and published by . This book was released on 1983-08-24 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Thermal Management Materials written by Guosheng Jiang and published by Springer Science & Business Media. This book was released on 2012-09-13 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Thermal Management Materials provides a comprehensive and hands-on treatise on the importance of thermal packaging in high performance systems. These systems, ranging from active electronically-scanned radar arrays to web servers, require components that can dissipate heat efficiently. This requires materials capable of dissipating heat and maintaining compatibility with the packaging and dye. Coverage includes all aspects of thermal management materials, both traditional and non-traditional,with an emphasis on metal based materials. An in-depth discussion of properties and manufacturing processes, and current applications are provided. Also presented are a discussion of the importance of cost, performance and reliability issues when making implementation decisions, product life cycle developments, lessons learned and future directions.
Download or read book Numerical Methods in Thermal Problems written by Roland Wynne Lewis and published by . This book was released on 1983 with total page 1246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia Of Thermal Packaging Set 2 Thermal Packaging Tools A 4 volume Set written by and published by World Scientific. This book was released on 2014-10-23 with total page 1397 pages. Available in PDF, EPUB and Kindle. Book excerpt: remove This Encyclopedia comes in 3 sets. To check out Set 1 and Set 3, please visit Set 1: Thermal Packaging Techniques and Set 3: Thermal Packaging Applications /remove Thermal and mechanical packaging - the enabling technologies for the physical implementation of electronic systems - are responsible for much of the progress in miniaturization, reliability, and functional density achieved by electronic, microelectronic, and nanoelectronic products during the past 50 years. The inherent inefficiency of electronic devices and their sensitivity to heat have placed thermal packaging on the critical path of nearly every product development effort in traditional, as well as emerging, electronic product categories.Successful thermal packaging is the key differentiator in electronic products, as diverse as supercomputers and cell phones, and continues to be of pivotal importance in the refinement of traditional products and in the development of products for new applications. The Encyclopedia of Thermal Packaging, compiled in four multi-volume sets (Set 1: Thermal Packaging Techniques, Set 2: Thermal Packaging Tools, Set 3: Thermal Packaging Applications, and Set 4: Thermal Packaging Configurations) will provide a comprehensive, one-stop treatment of the techniques, tools, applications, and configurations of electronic thermal packaging. Each of the author-written sets presents the accumulated wisdom and shared perspectives of a few luminaries in the thermal management of electronics.Set 2: Thermal Packaging ToolsThe second set in the encyclopedia, Thermal Packaging Tools, includes volumes dedicated to thermal design of data centers, techniques and models for the design and optimization of heat sinks, the development and use of reduced-order “compact” thermal models of electronic components, a database of critical material thermal properties, and a comprehensive exploration of thermally-informed electronic design. The numerical and analytical techniques described in these volumes are among the primary tools used by thermal packaging practitioners and researchers to accelerate product and system development and achieve “correct by design” thermal packaging solutions.The four sets in the Encyclopedia of Thermal Packaging will provide the novice and student with a complete reference for a quick ascent on the thermal packaging ';learning curve,'; the practitioner with a validated set of techniques and tools to face every challenge, and researchers with a clear definition of the state-of-the-art and emerging needs to guide their future efforts. This encyclopedia will, thus, be of great interest to packaging engineers, electronic product development engineers, and product managers, as well as to researchers in thermal management of electronic and photonic components and systems, and most beneficial to undergraduate and graduate students studying mechanical, electrical, and electronic engineering.
Download or read book Advances in Thermal Modeling of Electronic Components and Systems written by Avram Bar Cohen and published by Advances in Thermal Modeling o. This book was released on 1997-12-31 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the series focuses on air cooling technology. Begins with a review of techniques used in thermal analysis of natural convection electronic systems, and continues with the presentation of a methodology for thermal modeling of air cooled components mounted on printed circuit boards. Gov
Download or read book Solving Problems in Thermal Engineering written by Viktor Józsa and published by Springer Nature. This book was released on 2019-10-24 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides general guidelines for solving thermal problems in the fields of engineering and natural sciences. Written for a wide audience, from beginner to senior engineers and physicists, it provides a comprehensive framework covering theory and practice and including numerous fundamental and real-world examples. Based on the thermodynamics of various material laws, it focuses on the mathematical structure of the continuum models and their experimental validation. In addition to several examples in renewable energy, it also presents thermal processes in space, and summarizes size-dependent, non-Fourier, and non-Fickian problems, which have increasing practical relevance in, e.g., the semiconductor industry. Lastly, the book discusses the key aspects of numerical methods, particularly highlighting the role of boundary conditions in the modeling process. The book provides readers with a comprehensive toolbox, addressing a wide variety of topics in thermal modeling, from constructing material laws to designing advanced power plants and engineering systems.
