Download or read book Numerical Grid Generation in Computational Fluid Dynamics and Related Fields written by A. S.- Arcilla and published by North Holland. This book was released on 1991 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings is the result of the increasing interest in the development and application of grid generation techniques in computational fluid dynamics (CFD) and related fields. The use of these techniques, formerly restricted to research and specialist organizations, is becoming more widespread due to significant advances in hardware and software technology. This conference series was started in 1986 to serve as an internationally acknowledged forum for researchers in the - at the time - novel and emerging field of grid generation techniques applied to CFD. In addition to a 20-page color section, this edition contains papers covering a wide spectrum of methods and techniques, both theoretical and applied, contributing to the scientific advance of this field.
Download or read book Handbook of Grid Generation written by Joe F. Thompson and published by CRC Press. This book was released on 1998-12-29 with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Grid Generation addresses the use of grids (meshes) in the numerical solutions of partial differential equations by finite elements, finite volume, finite differences, and boundary elements. Four parts divide the chapters: structured grids, unstructured girds, surface definition, and adaption/quality. An introduction to each section provides a roadmap through the material. This handbook covers: Fundamental concepts and approaches Grid generation process Essential mathematical elements from tensor analysis and differential geometry, particularly relevant to curves and surfaces Cells of any shape - Cartesian, structured curvilinear coordinates, unstructured tetrahedra, unstructured hexahedra, or various combinations Separate grids overlaid on one another, communicating data through interpolation Moving boundaries and internal interfaces in the field Resolving gradients and controlling solution error Grid generation codes, both commercial and freeware, as well as representative and illustrative grid configurations Handbook of Grid Generation contains 37 chapters as well as contributions from more than 100 experts from around the world, comprehensively evaluating this expanding field and providing a fundamental orientation for practitioners.
Download or read book Computational Fluid Dynamics written by Jiri Blazek and published by Elsevier. This book was released on 2005-12-20 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Fluid Dynamics (CFD) is an important design tool in engineering and also a substantial research tool in various physical sciences as well as in biology. The objective of this book is to provide university students with a solid foundation for understanding the numerical methods employed in today's CFD and to familiarise them with modern CFD codes by hands-on experience. It is also intended for engineers and scientists starting to work in the field of CFD or for those who apply CFD codes. Due to the detailed index, the text can serve as a reference handbook too. Each chapter includes an extensive bibliography, which provides an excellent basis for further studies.
Download or read book Fundamentals of Grid Generation written by Patrick Knupp and published by CRC Press. This book was released on 2020-12-17 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Grid Generation is an outstanding text/reference designed to introduce students in applied mathematics, mechanical engineering, and aerospace engineering to structured grid generation. It provides excellent reference material for practitioners in industry, and it presents new concepts to researchers. Readers will learn what boundary-conforming grids are, how to generate them, and how to devise their own methods. The text is written in a clear, intuitive style that doesn't get bogged down in unnecessary abstractions. Topics covered include planar, surface, and 3-D grid generation; numerical techniques; solution adaptivity; the finite volume approach to discretization of hosted equations; concepts from elementary differential geometry; and the transformation of differential operators to general coordinate systems. The book also reviews the literature on algebraic, conformal, orthogonal, hyperbolic, parabolic, elliptic, biharmonic, and variational approaches to grid generation. This unique volume closes with the author's original methods of variational grid generation.
Download or read book Numerical Grid Generation in Computational Fluid Dynamics and Related Fields written by N. P. Weatherill and published by . This book was released on 1994 with total page 1134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Computational Differential Geometry Approach to Grid Generation written by Vladimir D. Liseikin and published by Springer Science & Business Media. This book was released on 2006-09-12 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of breaking up a physical domain into smaller sub-domains, known as meshing, facilitates the numerical solution of partial differential equations used to simulate physical systems. In an updated and expanded Second Edition, this monograph gives a detailed treatment based on the numerical solution of inverted Beltramian and diffusion equations with respect to monitor metrics for generating both structured and unstructured grids in domains and on surfaces.
Download or read book Handbook of Computational Fluid Mechanics written by Roger Peyret and published by Academic Press. This book was released on 1996 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers computational fluid dynamics from fundamentals to applications. This text provides a well documented critical survey of numerical methods for fluid mechanics, and gives a state-of-the-art description of computational fluid mechanics, considering numerical analysis, computer technology, and visualization tools. The chapters in this book are invaluable tools for reaching a deeper understanding of the problems associated with the calculation of fluid motion in various situations: inviscid and viscous, incompressible and compressible, steady and unsteady, laminar and turbulent flows, as well as simple and complex geometries. Each chapter includes a related bibliography Covers fundamentals and applications Provides a deeper understanding of the problems associated with the calculation of fluid motion
Download or read book Surface Modeling Grid Generation and Related Issues in Computational Fluid Dynamic CFD Solutions written by and published by . This book was released on 1995 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Grid Generation Methods written by Vladimir D. Liseikin and published by Springer. This book was released on 2017-06-12 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is an introduction to methods of grid generation technology in scientific computing. Special attention is given to methods developed by the author for the treatment of singularly-perturbed equations, e.g. in modeling high Reynolds number flows. Functionals of conformality, orthogonality, energy and alignment are discussed.
Download or read book Computational Fluid Dynamics written by T. J. Chung and published by Cambridge University Press. This book was released on 2010-09-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Computational Fluid Dynamics represents a significant improvement from the first edition. However, the original idea of including all computational fluid dynamics methods (FDM, FEM, FVM); all mesh generation schemes; and physical applications to turbulence, combustion, acoustics, radiative heat transfer, multiphase flow, electromagnetic flow, and general relativity is still maintained. The second edition includes a new section on preconditioning for EBE-GMRES and a complete revision of the section on flowfield-dependent variation methods, which demonstrates more detailed computational processes and includes additional example problems. For those instructors desiring a textbook that contains homework assignments, a variety of problems for FDM, FEM and FVM are included in an appendix. To facilitate students and practitioners intending to develop a large-scale computer code, an example of FORTRAN code capable of solving compressible, incompressible, viscous, inviscid, 1D, 2D and 3D for all speed regimes using the flowfield-dependent variation method is made available.
Download or read book The Finite Volume Method in Computational Fluid Dynamics written by F. Moukalled and published by Springer. This book was released on 2015-08-13 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores both the theoretical foundation of the Finite Volume Method (FVM) and its applications in Computational Fluid Dynamics (CFD). Readers will discover a thorough explanation of the FVM numerics and algorithms used for the simulation of incompressible and compressible fluid flows, along with a detailed examination of the components needed for the development of a collocated unstructured pressure-based CFD solver. Two particular CFD codes are explored. The first is uFVM, a three-dimensional unstructured pressure-based finite volume academic CFD code, implemented within Matlab. The second is OpenFOAM®, an open source framework used in the development of a range of CFD programs for the simulation of industrial scale flow problems. With over 220 figures, numerous examples and more than one hundred exercise on FVM numerics, programming, and applications, this textbook is suitable for use in an introductory course on the FVM, in an advanced course on numerics, and as a reference for CFD programmers and researchers.
Download or read book Advanced Computational Fluid and Aerodynamics written by Paul G. Tucker and published by Cambridge University Press. This book was released on 2016-03-15 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the computational fluid dynamics evolution and gives an overview of the methods available to the engineer.
Download or read book Numerical Grid Generation in Computational Field Simulations written by B. K. Soni and published by . This book was released on 1996 with total page 1257 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Performance Computing in Biomedical Research written by Theo C. Pilkington and published by CRC Press. This book was released on 2020-09-10 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Leading researchers have contributed state-of-the-art chapters to this overview of high-performance computing in biomedical research. The book includes over 30 pages of color illustrations. Some of the important topics featured in the book include the following:
Download or read book Fundamentals of Grid Generation written by Stanley Steinberg and published by CRC Press. This book was released on 2020-12-17 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Grid Generation is an outstanding text/reference designed to introduce students in applied mathematics, mechanical engineering, and aerospace engineering to structured grid generation. It provides excellent reference material for practitioners in industry, and it presents new concepts to researchers. Readers will learn what boundary-conforming grids are, how to generate them, and how to devise their own methods. The text is written in a clear, intuitive style that doesn't get bogged down in unnecessary abstractions. Topics covered include planar, surface, and 3-D grid generation; numerical techniques; solution adaptivity; the finite volume approach to discretization of hosted equations; concepts from elementary differential geometry; and the transformation of differential operators to general coordinate systems. The book also reviews the literature on algebraic, conformal, orthogonal, hyperbolic, parabolic, elliptic, biharmonic, and variational approaches to grid generation. This unique volume closes with the author's original methods of variational grid generation.
Download or read book Algorithmic Trends in Computational Fluid Dynamics written by M.Y. Hussaini and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the ICASE/LaRC Work shop on the "Algorithmic Trends for Computational Fluid Dynamics (CFD) in the 90's" conducted by the Institute for Computer Applica tions in Science and Engineering (ICASE) and the Fluid Mechanics Division of NASA Langley Research Center during September 15-17, 1991. The purpose of the workshop was to bring together numerical analysts and computational fluid dynamicists i) to assess the state of the art in the areas of numerical analysis particularly relevant to CFD, ii) to identify promising new developments in various areas of numerical analysis that will have impact on CFD, and iii) to establish a long-term perspective focusing on opportunities and needs. This volume consists of five chapters - i) Overviews, ii) Accelera tion Techniques, iii) Spectral and Higher-Order Methods, iv) Multi Resolution/ Subcell Resolution Schemes (including adaptive meth ods), and v) Inherently Multidimensional Schemes. Each chapter covers a session of the Workshop. The chapter on overviews contains the articles by J.L. Steger, H.-O. Kreiss, R.W. MacCormack, O.
Download or read book Parallel Computational Fluid Dynamics 97 written by D. Emerson and published by Elsevier. This book was released on 1998-04-17 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Fluid Dynamics (CFD) is a discipline that has always been in the vanguard of the exploitation of emerging and developing technologies. Advances in both algorithms and computers have rapidly been absorbed by the CFD community in its quest for more accurate simulations and reductions in the time to solution. Within this context, parallel computing has played an increasingly important role. Moreover, the uptake of parallel computing has brought the CFD community into ever-closer contact with hardware vendors and computer scientists. The multidisciplinary subject of parallel CFD and its rapidly evolving nature, in terms of hardware and software, requires a regular international meeting of this nature to keep abreast of the most recent developments. Parallel CFD '97 is part of an annual conference series dedicated to the discussion of recent developments and applications of parallel computing in the field of CFD and related disciplines. This was the 9th in the series, and since the inaugural conference in 1989, many new developments and technologies have emerged. The intervening years have also proved to be extremely volatile for many hardware vendors and a number of companies appeared and then disappeared. However, the belief that parallel computing is the only way forward has remained undiminished. Moreover, the increasing reliability and acceptance of parallel computers has seen many commercial companies now offering parallel versions of their codes, many developed within the EC funded EUROPORT activity, but generally for more modest numbers of processors. It is clear that industry has not moved to large scale parallel systems but it has shown a keen interest in more modest parallel systems recognising that parallel computing will play an important role in the future. This book forms the proceedings of the CFD '97 conference, which was organised by the the Computational Engineering Group at Daresbury Laboratory and held in Manchester, England, on May 19-21 1997. The sessions involved papers on many diverse subjects including turbulence, reactive flows, adaptive schemes, unsteady flows, unstructured mesh applications, industrial applications, developments in software tools and environments, climate modelling, parallel algorithms, evaluation of computer architectures and a special session devoted to parallel CFD at the AEREA research centres. This year's conference, like its predecessors, saw a continued improvement in both the quantity and quality of contributed papers. Since the conference series began many significant milestones have been acheived. For example in 1994, Massively Parallel Processing (MPP) became a reality with the advent of Cray T3D. This, of course, has brought with it the new challenge of scalability for both algorithms and architectures. In the 12 months since the 1996 conference, two more major milestones were achieved: microprocessors with a peak performance of a Gflop/s became available and the world's first Tflop/s calculation was performed. In the 1991 proceedings, the editors indicated that a Tflop/s computer was likely to be available in the latter half of this decade. On December 4th 1996, Intel achieved this breakthrough on the Linpack benchmark using 7,264 (200MHz) Pentium Pro microprocessors as part of the ASCI Red project. With the developments in MPP, the rapid rise of SMP architectures and advances in PC technology, the future for parallel CFD looks both promising and challenging.
