Download or read book Nuclear Reactor Control Engineering written by Joseph M. Harrer and published by . This book was released on 1963 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics and Control of Nuclear Reactors written by Thomas W. Kerlin and published by Academic Press. This book was released on 2019-10-05 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics and Control of Nuclear Reactors presents the latest knowledge and research in reactor dynamics, control and instrumentation; important factors in ensuring the safe and economic operation of nuclear power plants. This book provides current and future engineers with a single resource containing all relevant information, including detailed treatments on the modeling, simulation, operational features and dynamic characteristics of pressurized light-water reactors, boiling light-water reactors, pressurized heavy-water reactors and molten-salt reactors. It also provides pertinent, but less detailed information on small modular reactors, sodium fast reactors, and gas-cooled reactors. Provides case studies and examples to demonstrate learning through problem solving, including an analysis of accidents at Three Mile Island, Chernobyl and Fukushima Daiichi Includes MATLAB codes to enable the reader to apply the knowledge gained to their own projects and research Features examples and problems that illustrate the principles of dynamic analysis as well as the mathematical tools necessary to understand and apply the analysis Publishers Note: Table 3.1 has been revised and will be included in future printings of the book with the following data: Group Decay Constant, li (sec-1) Delayed Neutron Fraction (bi) 1 0.0124 0.000221 2 0.0305 0.001467 3 0.111 0.001313 4 0.301 0.002647 5 1.14 0.000771 6 3.01 0.000281 Total delayed neutron fraction: 0.0067
Download or read book Nuclear Reactor Kinetics and Plant Control written by Yoshiaki Oka and published by Springer Science & Business Media. This book was released on 2013-03-01 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding time-dependent behaviors of nuclear reactors and the methods of their control is essential to the operation and safety of nuclear power plants. This book provides graduate students, researchers, and engineers in nuclear engineering comprehensive information on both the fundamental theory of nuclear reactor kinetics and control and the state-of-the-art practice in actual plants, as well as the idea of how to bridge the two. The first part focuses on understanding fundamental nuclear kinetics. It introduces delayed neutrons, fission chain reactions, point kinetics theory, reactivity feedbacks, and related measurement techniques. The second part helps readers to grasp the theories and practice of nuclear power plant control. It introduces control theory, nuclear reactor stability, and the operation and control of existing nuclear power plants such as a typical pressurized water reactor, a typical boiling water reactor, the prototype fast breeder reactor Monju, and the high-temperature gas-cooled test reactor (HTTR). Wherever possible, the design and operation data for these plants are provided.
Download or read book Nuclear Reactor written by John C. Lee and published by John Wiley & Sons. This book was released on 2020-02-26 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory text for broad areas of nuclear reactor physics Nuclear Reactor Physics and Engineering offers information on analysis, design, control, and operation of nuclear reactors. The author—a noted expert on the topic—explores the fundamentals and presents the mathematical formulations that are grounded in differential equations and linear algebra. The book puts the focus on the use of neutron diffusion theory for the development of techniques for lattice physics and global reactor system analysis. The author also includes recent developments in numerical algorithms, including the Krylov subspace method, and the MATLAB software, including the Simulink toolbox, for efficient studies of steady-state and transient reactor configurations. In addition, nuclear fuel cycle and associated economics analysis are presented, together with the application of modern control theory to reactor operation. This important book: Provides a comprehensive introduction to the fundamental concepts of nuclear reactor physics and engineering Contains information on nuclear reactor kinetics and reactor design analysis Presents illustrative examples to enhance understanding Offers self-contained derivation of fluid conservation equations Written for undergraduate and graduate students in nuclear engineering and practicing engineers, Nuclear Reactor Physics and Engineering covers the fundamental concepts and tools of nuclear reactor physics and analysis.
Download or read book Instrumentation and Control Systems for Nuclear Power Plants written by Mauro Cappelli and published by Woodhead Publishing. This book was released on 2023-03-21 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation and Control Systems for Nuclear Power Plants provides the latest innovative research onthe design of effective modern I&C systems for both existing and newly commissioned plants, along withinformation on system implementation. Dr. Cappelli and his team of expert contributors cover fundamentals,explore the most advanced research in control systems technology, and tackle topics such as the human–machine interface, control room redesign, and control modeling. The inclusion of codes and standards,inspection procedures, and regulatory issues ensure that the reader can confidently design their own I&Csystems and integrate them into existing nuclear sites and projects. Covers various viewpoints, including theory, modeling, design and applications of I&C systems Includes codes and standards, inspection procedures and regulatory issues Combines engineering and physics aspects in one thorough resource, presenting human factors, modeling and HMI together for the first time Instrumentation and Control Systems for Nuclear Power Plants highlights the key role nuclear energy plays in the transition to a lower-carbon energy mix
Download or read book Dynamics and Control of Thermal Reactors written by Massachusetts Institute of Technology. Nuclear Engineering Project and published by . This book was released on 1954 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Nuclear Engineering written by Brent J. Lewis and published by John Wiley & Sons. This book was released on 2017-03-31 with total page 1233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental of Nuclear Engineering is derived from over 25 years of teaching undergraduate and graduate courses on nuclear engineering. The material has been extensively class tested and provides the most comprehensive textbook and reference on the fundamentals of nuclear engineering. It includes a broad range of important areas in the nuclear engineering field; nuclear and atomic theory; nuclear reactor physics, design, control/dynamics, safety and thermal-hydraulics; nuclear fuel engineering; and health physics/radiation protection. It also includes the latest information that is missing in traditional texts, such as space radiation. The aim of the book is to provide a source for upper level undergraduate and graduate students studying nuclear engineering.
Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by Committee on Application of Digital Instrumentation and Control Systems to Nuclear Power Plant Operations and Safety and published by National Academies Press. This book was released on 1997-05-02 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book A Digital Nuclear Reactor Control System written by Paul Maxwell Coble and published by . This book was released on 1958 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Reactor Control and Instrumentation written by John Henry Bowen and published by . This book was released on 1959 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Power Plant Instrumentation and Control Systems for Safety and Security written by Yastrebenetsky, Michael and published by IGI Global. This book was released on 2014-02-28 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents and natural disasters involving nuclear power plants such as Chernobyl, Three Mile Island, and the recent meltdown at Fukushima are rare, but their effects are devastating enough to warrant increased vigilance in addressing safety concerns. Nuclear Power Plant Instrumentation and Control Systems for Safety and Security evaluates the risks inherent to nuclear power and methods of preventing accidents through computer control systems and other such emerging technologies. Students and scholars as well as operators and designers will find useful insight into the latest security technologies with the potential to make the future of nuclear energy clean, safe, and reliable.
Download or read book Maintenance of Process Instrumentation in Nuclear Power Plants written by H.M. Hashemian and published by Springer Science & Business Media. This book was released on 2006-11-09 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a training course for I and C maintenance engineers in power, process, chemical, and other industries. It summarizes all the scattered literature in this field. The book compiles 30 years of knowledge gained by the author and his staff in testing the I and C systems of nuclear power plants around the world. It focuses on process temperature and pressure sensors and the verification of these sensors’ calibration and response time.
Download or read book Nuclear Reactor Design written by Yoshiaki Oka and published by Springer. This book was released on 2014-06-11 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on core design and methods for design and analysis. It is based on advances made in nuclear power utilization and computational methods over the past 40 years, covering core design of boiling water reactors and pressurized water reactors, as well as fast reactors and high-temperature gas-cooled reactors. The objectives of this book are to help graduate and advanced undergraduate students to understand core design and analysis, and to serve as a background reference for engineers actively working in light water reactors. Methodologies for core design and analysis, together with physical descriptions, are emphasized. The book also covers coupled thermal hydraulic core calculations, plant dynamics, and safety analysis, allowing readers to understand core design in relation to plant control and safety.
Download or read book Nuclear Reactor Engineering written by Samuel Glasstone and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Samuel Glasstone, the senior author of the previous editions of this book, was anxious to live until his ninetieth birthday, but passed away in 1986, a few months short of this milestone. I am grateful for the many years of stimulation received during our association, and in preparing this edition have attempted to maintain his approach. Previous editions of this book were intended to serve as a text for students and a reference for practicing engineers. Emphasis was given to the broad perspective, particularly for topics important to reactor design and oper ation, with basic coverage provided in such supporting areas as neutronics, thermal-hydraulics, and materials. This, the Fourth Edition, was prepared with these same general objectives in mind. However, during the past three decades, the nuclear industry and university educational programs have matured considerably, presenting some challenges in meeting the objec tives of this book. Nuclear power reactors have become much more complex, with an ac companying growth in supporting technology. University programs now offer separate courses covering such basic topics as reactor physics, thermal hydraulics, and materials. Finally, the general availability of inexpensive xv xvi Preface powerful micro-and minicomputers has transformed design and analysis procedures so that sophisticated methods are now commonly used instead of earlier, more approximate approaches.
Download or read book Optimal Control of Nuclear Reactor Processes written by Ronald R. Mohler and published by . This book was released on 1965 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Bibliographic File of Technical Report Abstracts Useful to Reactor Control System Engineering written by Francis P. Green and published by . This book was released on 1958 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control of a Nuclear Reactor with a Gaseous Control System written by Harry W. Davison and published by . This book was released on 1967 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
