Download or read book Thermal Hydraulics of Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Woodhead Publishing. This book was released on 2017-05-18 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics of Water-Cooled Nuclear Reactors reviews flow and heat transfer phenomena in nuclear systems and examines the critical contribution of this analysis to nuclear technology development. With a strong focus on system thermal hydraulics (SYS TH), the book provides a detailed, yet approachable, presentation of current approaches to reactor thermal hydraulic analysis, also considering the importance of this discipline for the design and operation of safe and efficient water-cooled and moderated reactors. Part One presents the background to nuclear thermal hydraulics, starting with a historical perspective, defining key terms, and considering thermal hydraulics requirements in nuclear technology. Part Two addresses the principles of thermodynamics and relevant target phenomena in nuclear systems. Next, the book focuses on nuclear thermal hydraulics modeling, covering the key areas of heat transfer and pressure drops, then moving on to an introduction to SYS TH and computational fluid dynamics codes. The final part of the book reviews the application of thermal hydraulics in nuclear technology, with chapters on V&V and uncertainty in SYS TH codes, the BEPU approach, and applications to new reactor design, plant lifetime extension, and accident analysis. This book is a valuable resource for academics, graduate students, and professionals studying the thermal hydraulic analysis of nuclear power plants and using SYS TH to demonstrate their safety and acceptability. - Contains a systematic and comprehensive review of current approaches to the thermal-hydraulic analysis of water-cooled and moderated nuclear reactors - Clearly presents the relationship between system level (top-down analysis) and component level phenomenology (bottom-up analysis) - Provides a strong focus on nuclear system thermal hydraulic (SYS TH) codes - Presents detailed coverage of the applications of thermal-hydraulics to demonstrate the safety and acceptability of nuclear power plants
Download or read book Nuclear Reactor Thermal Hydraulics written by Robert E. Masterson and published by CRC Press. This book was released on 2019-08-21 with total page 2352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Thermal-Hydraulic Systems provides a comprehensive approach to nuclear reactor thermal-hydraulics, reflecting the latest technologies, reactor designs, and safety considerations. The text makes extensive use of color images, internet links, computer graphics, and other innovative techniques to explore nuclear power plant design and operation. Key fluid mechanics, heat transfer, and nuclear engineering concepts are carefully explained, and supported with worked examples, tables, and graphics. Intended for use in one or two semester courses, the text is suitable for both undergraduate and graduate students. A complete Solutions Manual is available for professors adopting the text.
Download or read book Nuclear Thermal Hydraulics written by Hajime Akimoto and published by Springer. This book was released on 2016-11-10 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides fundamentals of nuclear thermal–hydraulics for reactor design and safety assessment. It also describes the basis for assessing cooling performance of nuclear reactors under accidental conditions. The descriptions in this book are virtually self-contained, beyond the assumption that readers are familiar with the introductory levels of nuclear engineering. This book helps readers understand the processes for nuclear reactor plant design and the most important factors in nuclear thermal-hydraulics.
Download or read book Handbook on Thermal Hydraulics in Water Cooled Nuclear Reactors written by Francesco D'Auria and published by Elsevier. This book was released on 2024-07-29 with total page 932 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook on Thermal Hydraulics of Water-Cooled Nuclear Reactors, Volume 1, Foundations and Principles includes all new chapters which delve deeper into the topic, adding context and practical examples to help readers apply learnings to their own setting. Topics covered include experimental thermal-hydraulics and instrumentation, numerics, scaling and containment in thermal-hydraulics, as well as a title dedicated to good practices in verification and validation. This book will be a valuable reference for graduate and undergraduate students of nuclear or thermal engineering, as well as researchers in nuclear thermal-hydraulics and reactor technology, engineers working in simulation and modeling of nuclear reactors, and more. In addition, nuclear operators, code developers and safety engineers will also benefit from the practical guidance provided. - Presents a comprehensive analysis on the connection between nuclear power and thermal hydraulics - Includes end-of-chapter questions, quizzes and exercises to confirm understanding and provides solutions in an appendix - Covers applicable nuclear reactor safety considerations and design technology throughout
Download or read book The Thermal hydraulics of a Boiling Water Nuclear Reactor written by Richard T. Lahey and published by . This book was released on 1993 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition of the classic monograph gives a comprehensive overview of the thermal-hydraulic technology underlying the design, operation, and safety assessment of boiling water reactors. In addition, new material on pressure suppression containment technology is presented.
Download or read book Particle Image Velocimetry written by Markus Raffel and published by Springer Science & Business Media. This book was released on 2007-08-09 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This immensely practical guide to PIV provides a condensed, yet exhaustive guide to most of the information needed for experiments employing the technique. This second edition has updated chapters on the principles and extra information on microscopic, high-speed and three component measurements as well as a description of advanced evaluation techniques. What’s more, the huge increase in the range of possible applications has been taken into account as the chapter describing these applications of the PIV technique has been expanded.
Download or read book Proceedings of International Nuclear Power Plant Thermal Hydraulics and Operations Topical Meeting written by and published by . This book was released on 1984 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Reactor Thermal Hydraulics written by Robert E. Masterson and published by CRC Press. This book was released on 2019-08-21 with total page 1354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Thermal-Hydraulic Systems provides a comprehensive approach to nuclear reactor thermal-hydraulics, reflecting the latest technologies, reactor designs, and safety considerations. The text makes extensive use of color images, internet links, computer graphics, and other innovative techniques to explore nuclear power plant design and operation. Key fluid mechanics, heat transfer, and nuclear engineering concepts are carefully explained, and supported with worked examples, tables, and graphics. Intended for use in one or two semester courses, the text is suitable for both undergraduate and graduate students. A complete Solutions Manual is available for professors adopting the text.
Download or read book Proceedings of International Nuclear Power Plant Thermal Hydraulics and Operations Topical Meeting written by Jason Chao and published by . This book was released on 1984 with total page 844 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamics and Control of Nuclear Reactors written by Thomas W. Kerlin and published by Academic Press. This book was released on 2019-10-05 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics and Control of Nuclear Reactors presents the latest knowledge and research in reactor dynamics, control and instrumentation; important factors in ensuring the safe and economic operation of nuclear power plants. This book provides current and future engineers with a single resource containing all relevant information, including detailed treatments on the modeling, simulation, operational features and dynamic characteristics of pressurized light-water reactors, boiling light-water reactors, pressurized heavy-water reactors and molten-salt reactors. It also provides pertinent, but less detailed information on small modular reactors, sodium fast reactors, and gas-cooled reactors. - Provides case studies and examples to demonstrate learning through problem solving, including an analysis of accidents at Three Mile Island, Chernobyl and Fukushima Daiichi - Includes MATLAB codes to enable the reader to apply the knowledge gained to their own projects and research - Features examples and problems that illustrate the principles of dynamic analysis as well as the mathematical tools necessary to understand and apply the analysis Publishers Note: Table 3.1 has been revised and will be included in future printings of the book with the following data: Group Decay Constant, li (sec-1) Delayed Neutron Fraction (bi) 1 0.0124 0.000221 2 0.0305 0.001467 3 0.111 0.001313 4 0.301 0.002647 5 1.14 0.000771 6 3.01 0.000281 Total delayed neutron fraction: 0.0067
Download or read book The Thermal Hydraulics of a Boiling Water Nuclear Reactor written by Richard T. Lahey and published by . This book was released on 1977 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: A monograph presenting an up-to-date overview of the thermal-hydraulic technology that underlies the design, operation, and safety assessment of boiling water nuclear reactors (BWRs), which represent a large fraction of the world's installed nuclear power capacity. Some important new material on pressure suppression containment technology has been added to this edition in order to provide readers with a more comprehensive understanding of BWR power plants. For experienced and entry-level workers in the field of nuclear energy, as well as for students of nuclear engineering. Annotation copyright by Book News, Inc., Portland, OR
Download or read book Pressurized Heavy Water Reactors written by and published by Elsevier. This book was released on 2021-10-08 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressurized Heavy Water Reactors: CANDU, the seventh volume in the JSME Series on Thermal and Nuclear Power Generation series, provides a comprehensive and complete review of a single type of reactor in a very accessible and practical way. The book presents the full lifecycle, from design and manufacturing to operation and maintenance, also covering fitness-for-service and long-term operation. It does not relate to any specific vendor-based technology, but rather provides a broad overview of the latest technologies from a variety of active locations which will be of great value to countries invested in developing their own nuclear programs. Including contemporary capabilities and challenges of nuclear technology, the book offers practical solutions to common problems faced, along with the safe and approved processes to reach suitable solutions. Professionals involved in nuclear power plant lifecycle assessment and researchers interested in the development and improvement of nuclear energy technologies will gain a deep understanding of PHWR nuclear reactor physics, chemistry and thermal-hydraulic properties. Provides a complete reference dedicated to the latest research on Pressurized Heavy Water Reactors and their economic and environmental benefits Goes beyond CANDU reactors to analyze the popular German and Indian designs, as well as plant design in Korea, Romania, China and Argentina Spans all phases of the nuclear power plant lifecycle, from design, manufacturing, operation, maintenance and long-term operation
Download or read book Nuclear Engineering Fundamentals written by Robert E. Masterson and published by CRC Press. This book was released on 2017-05-18 with total page 961 pages. Available in PDF, EPUB and Kindle. Book excerpt: NUCLEAR ENGINEERING FUNDAMENTALS is the most modern, up-to-date, and reader friendly nuclear engineering textbook on the market today. It provides a thoroughly modern alternative to classical nuclear engineering textbooks that have not been updated over the last 20 years. Printed in full color, it conveys a sense of awe and wonder to anyone interested in the field of nuclear energy. It discusses nuclear reactor design, nuclear fuel cycles, reactor thermal-hydraulics, reactor operation, reactor safety, radiation detection and protection, and the interaction of radiation with matter. It presents an in-depth introduction to the science of nuclear power, nuclear energy production, the nuclear chain reaction, nuclear cross sections, radioactivity, and radiation transport. All major types of reactors are introduced and discussed, and the role of internet tools in their analysis and design is explored. Reactor safety and reactor containment systems are explored as well. To convey the evolution of nuclear science and engineering, historical figures and their contributions to evolution of the nuclear power industry are explored. Numerous examples are provided throughout the text, and are brought to life through life-like portraits, photographs, and colorful illustrations. The text follows a well-structured pedagogical approach, and provides a wide range of student learning features not available in other textbooks including useful equations, numerous worked examples, and lists of key web resources. As a bonus, a complete Solutions Manual and .PDF slides of all figures are available to qualified instructors who adopt the text. More than any other fundamentals book in a generation, it is student-friendly, and truly impressive in its design and its scope. It can be used for a one semester, a two semester, or a three semester course in the fundamentals of nuclear power. It can also serve as a great reference book for practicing nuclear scientists and engineers. To date, it has achieved the highest overall satisfaction of any mainstream nuclear engineering textbook available on the market today.
Download or read book Nuclear Power Plant Design and Analysis Codes written by Jun Wang and published by Woodhead Publishing. This book was released on 2020-11-10 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Power Plant Design and Analysis Codes: Development, Validation, and Application presents the latest research on the most widely used nuclear codes and the wealth of successful accomplishments which have been achieved over the past decades by experts in the field. Editors Wang, Li,Allison, and Hohorst and their team of authors provide readers with a comprehensive understanding of nuclear code development and how to apply it to their work and research to make their energy production more flexible, economical, reliable and safe.Written in an accessible and practical way, each chapter considers strengths and limitations, data availability needs, verification and validation methodologies and quality assurance guidelines to develop thorough and robust models and simulation tools both inside and outside a nuclear setting. This book benefits those working in nuclear reactor physics and thermal-hydraulics, as well as those involved in nuclear reactor licensing. It also provides early career researchers with a solid understanding of fundamental knowledge of mainstream nuclear modelling codes, as well as the more experienced engineers seeking advanced information on the best solutions to suit their needs. - Captures important research conducted over last few decades by experts and allows new researchers and professionals to learn from the work of their predecessors - Presents the most recent updates and developments, including the capabilities, limitations, and future development needs of all codes - Incudes applications for each code to ensure readers have complete knowledge to apply to their own setting
Download or read book Thermo Hydraulics of Nuclear Reactors written by Christopher Earls Brennen and published by Cambridge University Press. This book was released on 2016-04-13 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a summary of thermo-hydraulic analyses and design principles of nuclear reactors for electricity generation. It includes summaries of the causes for the three major nuclear power generation accidents, Three Mile Island, Chernobyl and Fukushima, and the major improvements to reactor safety that grew out of those accidents.
Download or read book Thermal Hydraulics Aspects of Liquid Metal Cooled Nuclear Reactors written by Ferry Roelofs and published by Woodhead Publishing. This book was released on 2018-11-30 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Hydraulics Aspects of Liquid Metal cooled Nuclear Reactors is a comprehensive collection of liquid metal thermal hydraulics research and development for nuclear liquid metal reactor applications. A deliverable of the SESAME H2020 project, this book is written by top European experts who discuss topics of note that are supplemented by an international contribution from U.S. partners within the framework of the NEAMS program under the U.S. DOE. This book is a convenient source for students, professionals and academics interested in liquid metal thermal hydraulics in nuclear applications. In addition, it will also help newcomers become familiar with current techniques and knowledge. - Presents the latest information on one of the deliverables of the SESAME H2020 project - Provides an overview on the design and history of liquid metal cooled fast reactors worldwide - Describes the challenges in thermal hydraulics related to the design and safety analysis of liquid metal cooled fast reactors - Includes the codes, methods, correlations, guidelines and limitations for liquid metal fast reactor thermal hydraulic simulations clearly - Discusses state-of-the-art, multi-scale techniques for liquid metal fast reactor thermal hydraulics applications
Download or read book Thermal Hydraulic Analysis of Nuclear Reactors written by Bahman Zohuri and published by Springer. This book was released on 2017-05-23 with total page 845 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised text covers the fundamentals of thermodynamics required to understand electrical power generation systems and the application of these principles to nuclear reactor power plant systems. The book begins with fundamental definitions of units and dimensions, thermodynamic variables and the Laws of Thermodynamics progressing to sections on specific applications of the Brayton and Rankine cycles for power generation and projected reactor systems design issues. It is not a traditional general thermodynamics text, per se, but a practical thermodynamics volume intended to explain the fundamentals and apply them to the challenges facing actual nuclear power plants systems, where thermal hydraulics comes to play. There have been significant new findings for intercooled systems since the previous edition published and they will be included in this volume. New technology plans for using a Nuclear Air-Brayton as a storage system for a low carbon grid are presented along with updated component sizes and performance criteria for Small Modular Reactors. Written in a lucid, straight-forward style while retaining scientific rigor, the content is accessible to upper division undergraduate students and aimed at practicing engineers in nuclear power facilities and engineering scientists and technicians in industry, academic research groups, and national laboratories. The book is also a valuable resource for students and faculty in various engineering programs concerned with nuclear reactors.
