Download or read book The Nuclear Fuel Cycle written by Nicholas Tsoulfanidis and published by . This book was released on 2013 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Fuel Cycle Science and Engineering written by Ian Crossland and published by Elsevier. This book was released on 2012-09-21 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear fuel cycle is characterised by the wide range of scientific disciplines and technologies it employs. The development of ever more integrated processes across the many stages of the nuclear fuel cycle therefore confronts plant manufacturers and operators with formidable challenges. Nuclear fuel cycle science and engineering describes both the key features of the complete nuclear fuel cycle and the wealth of recent research in this important field.Part one provides an introduction to the nuclear fuel cycle. Radiological protection, security and public acceptance of nuclear technology are considered, along with the economics of nuclear power. Part two goes on to explore materials mining, enrichment, fuel element design and fabrication for the uranium and thorium nuclear fuel cycle. The impact of nuclear reactor design and operation on fuel element irradiation is the focus of part three, including water and gas-cooled reactors, along with CANDU and Generation IV designs. Finally, part four reviews spent nuclear fuel and radioactive waste management.With its distinguished editor and international team of expert contributors, Nuclear fuel cycle science and engineering provides an important review for all those involved in the design, fabrication, use and disposal of nuclear fuels as well as regulatory bodies and researchers in this field. - Provides a comprehensive and holistic review of the complete nuclear fuel cycle - Reviews the issues presented by the nuclear fuel cycle, including radiological protection and security, public acceptance and economic analysis - Discusses issues at the front-end of the fuel cycle, including uranium and thorium mining, enrichment and fuel design and fabrication
Download or read book The Nuclear Fuel Cycle written by Nicholas Tsoulfanidis and published by . This book was released on 2013 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Country Nuclear Fuel Cycle Profiles written by International Atomic Energy Agency and published by IAEA. This book was released on 2005 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, activities related to the nuclear fuel cycle have expanded globally. In addition, the complexity of the nuclear fuel cycle market has increased with the emergence of new providers of fuel cycle services. In this context, a need was perceived for a compilation of country profiles on nuclear fuel cycle activities in a form which could be easily understood both by experts and by the public, and which should lead to a greater understanding of these activities worldwide. Furthermore, such information would improve the transparency of nuclear energy development in general. The first edition was published in 2001 and showed the status of the nuclear fuel cycle at the end of 1999. Essentially, this second edition represents the status of the nuclear fuel cycle at the end of 2002 and consists of two parts: the first part is a review of worldwide activities related to the nuclear fuel cycle; the second comprises the country profiles, reflecting each country's status with regard to nuclear fuel cycle activities. The second part incorporates a graphical representation of material flow in the nuclear fuel cycle of each country.
Download or read book Nuclear Fuel Elements written by Brian R. T. Frost and published by Elsevier. This book was released on 2013-10-22 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Fuel Elements: Design, Fabrication and Performance is concerned with the design, fabrication, and performance of nuclear fuel elements, with emphasis on fast reactor fuel elements. Topics range from fuel types and the irradiation behavior of fuels to cladding and duct materials, fuel element design and modeling, fuel element performance testing and qualification, and the performance of water reactor fuels. Fast reactor fuel elements, research and test reactor fuel elements, and unconventional fuel elements are also covered. This volume consists of 12 chapters and begins with an overview of nuclear reactors and fuel elements, as well as fuel element design and development based on the reactor operator's approach, materials scientist's approach, and interdisciplinary approach. The reader is then introduced to different types of nuclear fuels and their irradiation behavior, considerations for using cladding and duct materials in fuel element design and development, and fuel element design and modeling. The chapters that follow focus on the testing of fuel element performance, experimental techniques and equipment for testing fuel element designs, and the performance of fuels for water reactors. Fuel elements for gas-cooled reactors, fast reactors, and research and test reactors are also described. The book concludes with an assessment of unconventional fuel elements. This book will be useful to fuel element technologists as well as materials scientists and engineers.
Download or read book Advanced Separation Techniques for Nuclear Fuel Reprocessing and Radioactive Waste Treatment written by Kenneth L Nash and published by Elsevier. This book was released on 2011-03-15 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced separations technology is key to closing the nuclear fuel cycle and relieving future generations from the burden of radioactive waste produced by the nuclear power industry. Nuclear fuel reprocessing techniques not only allow for recycling of useful fuel components for further power generation, but by also separating out the actinides, lanthanides and other fission products produced by the nuclear reaction, the residual radioactive waste can be minimised. Indeed, the future of the industry relies on the advancement of separation and transmutation technology to ensure environmental protection, criticality-safety and non-proliferation (i.e., security) of radioactive materials by reducing their long-term radiological hazard.Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment provides a comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatment. Part one covers the fundamental chemistry, engineering and safety of radioactive materials separations processes in the nuclear fuel cycle, including coverage of advanced aqueous separations engineering, as well as on-line monitoring for process control and safeguards technology. Part two critically reviews the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment. The section includes discussions of advanced PUREX processes, the UREX+ concept, fission product separations, and combined systems for simultaneous radionuclide extraction. Part three details emerging and innovative treatment techniques, initially reviewing pyrochemical processes and engineering, highly selective compounds for solvent extraction, and developments in partitioning and transmutation processes that aim to close the nuclear fuel cycle. The book concludes with other advanced techniques such as solid phase extraction, supercritical fluid and ionic liquid extraction, and biological treatment processes.With its distinguished international team of contributors, Advanced separation techniques for nuclear fuel reprocessing and radioactive waste treatment is a standard reference for all nuclear waste management and nuclear safety professionals, radiochemists, academics and researchers in this field. - A comprehensive and timely reference on nuclear fuel reprocessing and radioactive waste treatment - Details emerging and innovative treatment techniques, reviewing pyrochemical processes and engineering, as well as highly selective compounds for solvent extraction - Discusses the development and application of separation and extraction processes for nuclear fuel reprocessing and radioactive waste treatment
Download or read book U S Research Reactors written by Battelle Memorial Institute. Columbus Laboratories and published by . This book was released on 1957 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Uranium for Nuclear Power written by Ian Hore-Lacy and published by Woodhead Publishing. This book was released on 2016-02-19 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uranium for Nuclear Power: Resources, Mining and Transformation to Fuel discusses the nuclear industry and its dependence on a steady supply of competitively priced uranium as a key factor in its long-term sustainability. A better understanding of uranium ore geology and advances in exploration and mining methods will facilitate the discovery and exploitation of new uranium deposits. The practice of efficient, safe, environmentally-benign exploration, mining and milling technologies, and effective site decommissioning and remediation are also fundamental to the public image of nuclear power. This book provides a comprehensive review of developments in these areas. - Provides researchers in academia and industry with an authoritative overview of the front end of the nuclear fuel cycle - Presents a comprehensive and systematic coverage of geology, mining, and conversion to fuel, alternative fuel sources, and the environmental and social aspects - Written by leading experts in the field of nuclear power, uranium mining, milling, and geological exploration who highlight the best practices needed to ensure environmental safety
Download or read book Comprehensive Nuclear Materials written by Todd R Allen and published by Elsevier. This book was released on 2011-05-12 with total page 3552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Nuclear Materials, Five Volume Set discusses the major classes of materials suitable for usage in nuclear fission, fusion reactors and high power accelerators, and for diverse functions in fuels, cladding, moderator and control materials, structural, functional, and waste materials. The work addresses the full panorama of contemporary international research in nuclear materials, from Actinides to Zirconium alloys, from the worlds' leading scientists and engineers. Critically reviews the major classes and functions of materials, supporting the selection, assessment, validation and engineering of materials in extreme nuclear environment Fully integrated with F-elements.net, a proprietary database containing useful cross-referenced property data on the lanthanides and actinides Details contemporary developments in numerical simulation, modelling, experimentation, and computational analysis, for effective implementation in labs and plants
Download or read book Plutonium written by Frank von Hippel and published by Springer Nature. This book was released on 2019-12-23 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a readable and thought-provoking analysis of the issues surrounding nuclear fuel reprocessing and fast-neutron reactors, including discussion of resources, economics, radiological risk and resistance to nuclear proliferation. It describes the history and science behind reprocessing, and gives an overview of the status of reprocessing programmes around the world. It concludes that such programs should be discontinued. While nuclear power is seen by many as the only realistic solution to the carbon emission problem, some national nuclear establishments have been pursuing development and deployment of sodium-cooled plutonium breeder reactors, and plutonium recycling. Its proponents argue that this system would offer significant advantages relative to current light water reactor technology in terms of greater uranium utilization efficiency, and that separating out the long-lived plutonium and other transuranics from spent fuel and fissioning them in fast reactors would greatly reduce the duration of the toxicity of radioactive waste. However, the history of efforts to deploy this system commercially in a number of countries over the last six decades has been one of economic and technical failure and, in some cases, was used to mask clandestine nuclear weapon development programs. Covering topics of significant public interest including nuclear safety, fuel storage, environmental impact and the spectre of nuclear terrorism, this book presents a comprehensive analysis of the issue for nuclear engineers, policy analysts, government officials and the general public. "Frank von Hippel, Jungmin Kang, and Masafumi Takubo, three internationally renowned nuclear experts, have done a valuable service to the global community in putting together this book, which both historically and comprehensively covers the “plutonium age” as we know it today. They articulate in a succinct and clear manner their views on the dangers of a plutonium economy and advocate a ban on the separation of plutonium for use in the civilian fuel cycle in view of the high proliferation and nuclear-security risks and lack of economic justification." (Mohamed ElBaradei, Director General, International Atomic Energy Agency (1997-2009), Nobel Peace Prize (2005)) "The 1960s dream of a ‘plutonium economy’ has not delivered abundant low-cost energy, but instead has left the world a radioactive legacy of nuclear weapons proliferation and the real potential for nuclear terrorism. Kang, Takubo, and von Hippel explain with power and clarity what can be done to reduce these dangers. The governments of the remaining countries whose nuclear research and development establishments are still pursuing the plutonium dream should pay attention.” (Senator Edward Markey, a leader in the US nuclear-disarmament movement as a member of Congress since 1976) "The authors have done an invaluable service by putting together in one place the most coherent analysis of the risks associated with plutonium, and the most compelling argument for ending the practice of separating plutonium from spent fuel for any purpose. They have given us an easily accessible history of the evolution of thinking about the nuclear fuel cycle, the current realities of nuclear power around the world and, arguably most important, a clear alternative path to deal with the spent fuel arising from nuclear reactors for decades to centuries to come." (Robert Gallucci, Chief US negotiator with North Korea (1994); Dean, Georgetown University School of Foreign Service (1996-2009); President, MacArthur Foundation (2009-2014))
Download or read book The Linear Reactivity Model for Nuclear Fuel Management written by M. J. Driscoll and published by . This book was released on 1990 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Linear Reactivity Model (LRM) is a simple nuclear fuel management model that comes with a diskette containing three programs. Consisting of a collection of algorithms and methods, the LRM describes complex core behavior, but it is simpler than the complex programs developed for design calculations. This makes the LRM particularly useful as a teaching tool to explain the basic principles of nuclear fuel management. The LRM mainly focuses on the pressurized water reactor, but it is also directly applicable to the boiling water reactor. Application of the LRM to the CANDU reactor is also covered.
Download or read book Nuclear Fuel Management written by Harvey W. Graves and published by John Wiley & Sons. This book was released on 1979 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Uranium Paris written by and published by . This book was released on 1988 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Cancer Risks in Populations Near Nuclear Facilities written by National Research Council and published by National Academies Press. This book was released on 2012-06-29 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the late 1980s, the National Cancer Institute initiated an investigation of cancer risks in populations near 52 commercial nuclear power plants and 10 Department of Energy nuclear facilities (including research and nuclear weapons production facilities and one reprocessing plant) in the United States. The results of the NCI investigation were used a primary resource for communicating with the public about the cancer risks near the nuclear facilities. However, this study is now over 20 years old. The U.S. Nuclear Regulatory Commission requested that the National Academy of Sciences provide an updated assessment of cancer risks in populations near USNRC-licensed nuclear facilities that utilize or process uranium for the production of electricity. Analysis of Cancer Risks in Populations near Nuclear Facilities: Phase 1 focuses on identifying scientifically sound approaches for carrying out an assessment of cancer risks associated with living near a nuclear facility, judgments about the strengths and weaknesses of various statistical power, ability to assess potential confounding factors, possible biases, and required effort. The results from this Phase 1 study will be used to inform the design of cancer risk assessment, which will be carried out in Phase 2. This report is beneficial for the general public, communities near nuclear facilities, stakeholders, healthcare providers, policy makers, state and local officials, community leaders, and the media.
Download or read book Nuclear Fusion with Polarized Fuel written by Giuseppe Ciullo and published by Springer. This book was released on 2016-07-13 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a detailed examination of the latest work on the potential of polarized fuel to realize the vision of energy production by nuclear fusion. It brings together contributions from nuclear physicists and fusion physicists with the aims of fostering exchange of information between the two communities, describing the current status in the field, and examining new ideas and projects under development. It is evident that polarized fuel can offer huge improvements for the first generation of fusion reactors and open new technological possibilities for future generations, including neutron lean reactors, which could be the most popular and sustainable energy production option to avoid environmental problems. Nevertheless, many questions must be resolved before polarized fuel can be used for energy production in the different reactor types. Readers will find this book to be a stimulating source of information on the key issues. It is based on contributions from leading scientists delivered at the meetings “Nuclear Fusion with Polarized Nucleons” (Trento, November 2013) and “PolFusion” (Ferrara, July 2015).
Download or read book Nuclear Materials Science written by Karl R. Whittle and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation 'Nuclear Materials Science' takes students from understanding standard materials science and engineering and uses it as a base to work from in teaching the additional requirements of nuclear engineering science.
Download or read book The Nuclear Fuel Cycle written by P. D. Wilson and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
