Download or read book Novel Trends in Production Devices and Systems V written by Daynier Rolando Delgado Sobrino and published by Trans Tech Publications Ltd. This book was released on 2019-04-24 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present publication arises from the cooperation between the Institute of Production Technologies (IPT), belonging to the Faculty of Materials Science and Technology (MTF) of the Slovak University of Technology (STU) and TRANS TECH PUBLICATIONS LTD. For the fifth time, the book aims at publishing scientific achievements on the Materials Science and Production Technologies fields, as well as at enhancing the worldwide cooperation and recognition among young and senior academicians and/or practitioners. The book addresses trends in Materials Science and their application in industry, e.g.: composites and biomaterials, polymers, materials weldability, analysis of metals and alloys, numerical analyses and simulation of materials and etc. Most of these topics keep a direct relation to production technologies and systems and thus, always keeping a special focus on the used materials. The book also addresses some key production processes, technologies and systems.
Download or read book Novel Trends in Production Devices and Systems IV written by Daynier Rolando Delgado Sobrino and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Novel Trends in Production Devices and Systems II written by Daynier Rolando Delgado Sobrino and published by Trans Tech Publications Ltd. This book was released on 2014-12-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the Special topic volume with invited peer reviewed papers only. The 80 papers are grouped as follows: Chapter 1: Novel Trends in Production Systems and Logistics (NTPS&L), Chapter 2: Novel Trends in Applied Mechanics and Materials (NTAM&M), Chapter 3: Information Technology and Software Development Applications in the Contexts of Production Systems, Logistics, Applied Mechanics and Materials (IT&SA), Chapter 4: Modern Management and Teaching Approaches in the Context of Production Systems, Logistics, Applied Mechanics and Materials (MM&TA).
Download or read book Novel Trends in Production Devices and Systems written by Karol Velíek and published by Trans Tech Publications Ltd. This book was released on 2014-01-03 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). The present publication arises as a result of the cooperation between the Institute of Production Systems and Applied Mechanics (IPSAM), belonging to the Faculty of Materials Sciences and Technology (MTF) of the Slovak University of Technology (STU) and TRANS TECH PUBLICATIONS. The book is aimed at publishing scientific achievements on the Novel Trends in Production and Systems as well as at enhancing the worldwide cooperation and recognition among young and senior academicians and/or practitioners, and specially those of the central European region. This edition has been enriched taking into account years of research and teaching activities in the field, experiences resulting from the scientific collaboration among higher education centers, e.g.: CECOL 2012, while at the same time by also counting on prestigious and disciplined scientific and organizing committees respectively, who made a strong analysis of each one of the submitted papers. Some of the main topics included in the book are those related but not limited to Mechanical and Machine Designs, Machining Tools, Trends in Production Devices and Systems, Production Logistics, Flexible/Intelligent Manufacturing Systems and Cells, Robotics and Automation, Rapid Prototyping, Trends in Applied Mechanics and Materials, Maintenance, New Teaching and Research Approaches, among others.
Download or read book Novel Trends in Production Devices and Systems III written by Daynier Rolando Delgado Sobrino and published by . This book was released on 2016-09 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Trends in Production Devices and Systems III (NTPDS III) special volume is aimed at publishing scientific achievements in the fields of Materials Science and associated Production Technologies, as well as at enhancing the worldwide cooperation among young and senior academicians and/or practitioners, and specially those from the European region. The volume has been enriched taking into account years of research and teaching activities in the fields, experiences resulting from the scientific collaboration among higher education centers, e.g.: CECOL, while at the same time by also counting on a prestigious editorial review board that made strong analyses of the submitted papers. Some of the main topics included in the book are those related but not limited to the trends in Materials Science and their application in industry, e.g.: composites and polymers, materials weldability, analysis of metals and alloys, numerical analyses and simulation of materials, etc
Download or read book Digitizing Production Systems written by Numan M. Durakbasa and published by Springer Nature. This book was released on 2021-11-10 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers from International Symposium for Production Research 2021, held on October 7–9, 2021, online, Turkey. The book reports recent advances in production engineering and operations. It explores topics including production research; production management; operations management; industry 4.0; industrial engineering; mechanical engineering; engineering management; and operational research. Presenting real-life applications, case studies, and mathematical models, this book is of interest to researchers, academics, and practitioners in the field of production and operation engineering. It provides both the results of recent research and practical solutions to real-world problems.
Download or read book Novel Trends in Production Devices and Systems IV written by Daynier Rolando Delgado Sobrino and published by . This book was released on 2018-05 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present publication arises as a result of the cooperation between the Institute of Production Technologies (IPT), belonging to the Faculty of Materials Science and Technology (MTF) of the Slovak University of Technology (STU) and TRANS TECH PUBLICATIONS INC. For the fifth time, the book aims at publishing scientific achievements on the Materials Science and Production Technologies fields, as well as at enhancing the worldwide cooperation and recognition among young and senior academicians and/or practitioners. Some of the main topics included in the book are those related but not limited to the trends in Materials Science and their application in industry, e.g.: composites and biomaterials, polymers, materials weldability, analysis of metals and alloys, numerical analyses and simulation of materials, etc. Most of these topics keeps a direct relation to the production technologies and systems and thus, always keeping a special focus on the materials used, there are also topics in the book addressing key production processes, technologies and systems.
Download or read book Novel Trends in Production Devices and Systems VI written by Daynier Rolando Delgado Sobrino and published by Trans Tech Publications Ltd. This book was released on 2020-05-27 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present publication arises as a result of the cooperation between the Institute of Production Technologies (IPT), belonging to the Faculty of Materials Science and Technology (MTF) of the Slovak University of Technology (STU) and TRANS TECH PUBLICATIONS INC. For the seventh time, the book aims at publishing scientific achievements on the Materials Science and Production Technologies fields, as well as at enhancing the worldwide cooperation and recognition among young and senior academicians and/or practitioners. Some of the main topics included in the book are those related but not limited to the trends in Materials Science and their application in industry, e.g.: composites and biomaterials, polymers, materials weldability, analysis of metals and alloys, numerical analysis and simulation of materials, etc. Most of these topics keep a direct relation to the production technologies and systems and thus, always keeping a special focus on the materials used, there are also topics in the book addressing key production processes, technologies and systems.
Download or read book New Trends in Process Control and Production Management written by Lenka Štofová and published by CRC Press. This book was released on 2017-09-27 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic economics, technological changes, increasing pressure from competition and customers to improve manufacturing and services are some of the major challenges to enterprises these days. New ways of improving organizational activities and management processes have to be created, in order to allow enterprises to manage the seemingly intensifying competitive markets successfully. Enterprises apply business optimizing solutions to meet new challenges and conditions. But also ensuring effective development for long-term competitiveness in a global environment. This is necessary for the application of qualitative changes in the industrial policy. “New Trends in Process Control and Production Management” (MTS 2017) is the collection of research papers from authors from seven countries around the world. They present case studies and empirical research which illustrates the progressive trends in business process management and the drive to achieve enterprise development and sustainability.
Download or read book Smart Technology Trends in Industrial and Business Management written by Dagmar Cagáňová and published by Springer. This book was released on 2019-02-15 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current developments in smart city research and application regarding the management of manufacturing systems, Industry 4.0, transportation, and business management. It suggests approaches to incorporating smart city innovations into manufacturing systems, with an eye towards competitiveness in a global environment. The same pro-innovative approach is then applied to business and cooperation management. The authors also present smart city transportation solutions including vehicle data processing/reporting system, mobile application for fleet managers, bus drivers, bus passengers and special applications for smart city buses like passenger counting system, IP cameras, GPS system etc. The goal of the book is to establish channels of communication and disseminate knowledge among researchers and professionals working on smart city research and application. Features contributions on a variety of topics related to smart cities from global researchers and professionals in a wide range of sectors; Presents topics relating to smart cities such as manufacturing, business, and transportation; Includes expanded selected papers from EAI International Conference on Management of Manufacturing Systems (MMS 2016), EAI Industry of Things and Future Technologies Conference – Mobility IoT 2016 and International Conference on Smart Electric Vehicles and Vehicular Ad-hoc NETworks (SEVNET).
Download or read book Advances in Manufacturing Processes Intelligent Methods and Systems in Production Engineering written by Andre Batako and published by Springer Nature. This book was released on 2022-04-19 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book forms an excellent basis for the development of intelligent manufacturing system for Industry 4.0, digital and distributed manufacturing, and factories for future. This book of new developments and advancement in intelligent control and optimization system for production engineering serves as a good companion to scholars, manufacturing companies, and RTO to improve the efficiency of production systems.
Download or read book Advanced Mechatronics Solutions written by Ryszard Jabłoński and published by Springer. This book was released on 2015-11-02 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the most rapidly changing areas of mechatronics, this book discusses signals and system control, mechatronic products, metrology and nanometrology, automatic control & robotics, biomedical engineering, photonics, design manufacturing and testing of MEMS. It is reflected in the list of contributors, including an international group of 302 leading researchers representing 12 countries. The book is intended for use in academic, government and industry R&D departments, as an indispensable reference tool for the years to come. Thid volume can serve a global community as the definitive reference source in Mechatronics. The book comprises carefully selected 93 contributions presented at the 11th International Conference Mechatronics 2015, organized by Faculty of Mechatronics, Warsaw University of Technology, on September 21-23, in Warsaw, Poland.
Download or read book Diagnostic Systems For Energy Equipments written by Vitalii P. Babak and published by Springer Nature. This book was released on 2020-03-19 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines key issues in ensuring the operational reliability of energy facilities. In this regard, it analyzes mathematical models of diagnostic signals that arise during the operation of power equipment; reviews the main findings of research into their characteristics; presents diagnostics methods for selected types of electric power and heat engineering equipment; and covers a range of diagnostic and monitoring systems and devices for power equipment. Given its scope, the book offers a valuable resource for researchers, engineers and specialists, as well as instructors and graduate students at institutions of higher learning.
Download or read book AUUGN written by and published by . This book was released on 1996-06 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronics Engineer s Reference Book written by F. F. Mazda and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics Engineer's Reference Book, Sixth Edition is a five-part book that begins with a synopsis of mathematical and electrical techniques used in the analysis of electronic systems. Part II covers physical phenomena, such as electricity, light, and radiation, often met with in electronic systems. Part III contains chapters on basic electronic components and materials, the building blocks of any electronic design. Part IV highlights electronic circuit design and instrumentation. The last part shows the application areas of electronics such as radar and computers.
Download or read book Catalogue of Title entries of Books and Other Articles Entered in the Office of the Librarian of Congress at Washington Under the Copyright Law Wherein the Copyright Has Been Completed by the Deposit of Two Copies in the Office written by Library of Congress. Copyright Office and published by . This book was released on 1963 with total page 1510 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Global Trends 2040 written by National Intelligence Council and published by Cosimo Reports. This book was released on 2021-03 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The ongoing COVID-19 pandemic marks the most significant, singular global disruption since World War II, with health, economic, political, and security implications that will ripple for years to come." -Global Trends 2040 (2021) Global Trends 2040-A More Contested World (2021), released by the US National Intelligence Council, is the latest report in its series of reports starting in 1997 about megatrends and the world's future. This report, strongly influenced by the COVID-19 pandemic, paints a bleak picture of the future and describes a contested, fragmented and turbulent world. It specifically discusses the four main trends that will shape tomorrow's world: - Demographics-by 2040, 1.4 billion people will be added mostly in Africa and South Asia. - Economics-increased government debt and concentrated economic power will escalate problems for the poor and middleclass. - Climate-a hotter world will increase water, food, and health insecurity. - Technology-the emergence of new technologies could both solve and cause problems for human life. Students of trends, policymakers, entrepreneurs, academics, journalists and anyone eager for a glimpse into the next decades, will find this report, with colored graphs, essential reading.
