Download or read book Novel Microstructures for Solids written by Richard A Dunlap and published by Morgan & Claypool Publishers. This book was released on 2018-12-05 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many years, evidence suggested that all solid materials either possessed a periodic crystal structure as proposed by the Braggs or they were amorphous glasses with no long-range order. In the 1970s, Roger Penrose hypothesized structures (Penrose tilings) with long-range order which were not periodic. The existence of a solid phase, known as a quasicrystal, that possessed the structure of a three dimensional Penrose tiling, was demonstrated experimentally in 1984 by Dan Shechtman and colleagues. Shechtman received the 2011 Nobel Prize in Chemistry for his discovery. The discovery and description of quasicrystalline materials provided the first concrete evidence that traditional crystals could be viewed as a subset of a more general category of ordered materials. This book introduces the diversity of structures that are now known to exist in solids through a consideration of quasicrystals (Part I) and the various structures of elemental carbon (Part II) and through an analysis of their relationship to conventional crystal structures. Both quasicrystals and the various allotropes of carbon are excellent examples of how our understanding of the microstructure of solids has progressed over the years beyond the concepts of traditional crystallography.
Download or read book Novel Microstructures for Solids written by Dunlap Richard A and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Novel Microstructures for Solids written by R. A. Dunlap and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: In the early part of the 20th century, x-rays were first used for the investigation of the atomic structure of solids. Until the 1980s experimental evidence suggested that virtually all solid materials were either amorphous or ordered three-dimensional structures with translational and rotational symmetry that were described by classical crystallographic concepts. Since then, a number of structures that stretch the concept of a crystalline material have been discovered. In 1984 a solid phase, known as a quasicrystal, that possessed long-range order but lacked the periodicity of a crystalline material, was observed. At about the same time, novel molecular structures were observed for elemental carbon, and more recently, carbon has been prepared as a two-dimensional material. Some of the recently discovered materials with novel microstructures are reviewed in the present book. Part I of the book describes the structure and properties of quasicrystalline materials while Part II gives an overview of some of the unique phases that have been observed for elemental carbon. These unusual structures are discussed in the context of related materials with traditional crystallographic order.
Download or read book Fundamentals of Materials Science written by Eric J. Mittemeijer and published by Springer Nature. This book was released on 2022-01-01 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers a strong introduction to the fundamental concepts of materials science. It conveys the quintessence of this interdisciplinary field, distinguishing it from merely solid-state physics and solid-state chemistry, using metals as model systems to elucidate the relation between microstructure and materials properties. Mittemeijer's Fundamentals of Materials Science provides a consistent treatment of the subject matter with a special focus on the microstructure-property relationship. Richly illustrated and thoroughly referenced, it is the ideal adoption for an entire undergraduate, and even graduate, course of study in materials science and engineering. It delivers a solid background against which more specialized texts can be studied, covering the necessary breadth of key topics such as crystallography, structure defects, phase equilibria and transformations, diffusion and kinetics, and mechanical properties. The success of the first edition has led to this updated and extended second edition, featuring detailed discussion of electron microscopy, supermicroscopy and diffraction methods, an extended treatment of diffusion in solids, and a separate chapter on phase transformation kinetics. “In a lucid and masterly manner, the ways in which the microstructure can affect a host of basic phenomena in metals are described.... By consistently staying with the postulated topic of the microstructure - property relationship, this book occupies a singular position within the broad spectrum of comparable materials science literature .... it will also be of permanent value as a reference book for background refreshing, not least because of its unique annotated intermezzi; an ambitious, remarkable work.” G. Petzow in International Journal of Materials Research. “The biggest strength of the book is the discussion of the structure-property relationships, which the author has accomplished admirably.... In a nutshell, the book should not be looked at as a quick ‘cook book’ type text, but as a serious, critical treatise for some significant time to come.” G.S. Upadhyaya in Science of Sintering. “The role of lattice defects in deformation processes is clearly illustrated using excellent diagrams . Included are many footnotes, ‘Intermezzos’, ‘Epilogues’ and asides within the text from the author’s experience. This ..... soon becomes valued for the interesting insights into the subject and shows the human side of its history. Overall this book provides a refreshing treatment of this important subject and should prove a useful addition to the existing text books available to undergraduate and graduate students and researchers in the field of materials science.” M. Davies in Materials World.
Download or read book Understanding Solids written by Richard J. D. Tilley and published by John Wiley & Sons. This book was released on 2005-09-27 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern introduction to the subject taking a unique integrated approach designed to appeal to both science and engineering students. Covering a broad spectrum of topics, this book includes numerous up-to-date examples of real materials with relevant applications and a modern treatment of key concepts. The science bias allows this book to be equally accessible to engineers, chemists and physicists. * Carefully structured into self-contained bite-sized chapters to enhance student understanding * Questions have been designed to reinforce the concepts presented * Includes coverage of radioactivity * Relects a rapidly growing field from the science perspective
Download or read book Micromechanics of Defects in Solids written by T. Mura and published by Springer Science & Business Media. This book was released on 1987-11-30 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book stems from a course on Micromechanics that I started about fifteen years ago at Northwestern University. At that time, micromechanics was a rather unfamiliar subject. Although I repeated the course every year, I was never convinced that my notes have quite developed into a final manuscript because new topics emerged constantly requiring revisions, and additions. I finally came to realize that if this is continued, then I will never complete the book to my total satisfaction. Meanwhile, T. Mori and I had coauthored a book in Japanese, entitled Micromechanics, published by Baifu-kan, Tokyo, in 1975. It received an extremely favorable response from students and re searchers in Japan. This encouraged me to go ahead and publish my course notes in their latest version, as this book, which contains further development of the subject and is more comprehensive than the one published in Japanese. Micromechanics encompasses mechanics related to microstructures of materials. The method employed is a continuum theory of elasticity yet its applications cover a broad area relating to the mechanical behavior of materi als: plasticity, fracture and fatigue, constitutive equations, composite materi als, polycrystals, etc. These subjects are treated in this book by means of a powerful and unified method which is called the 'eigenstrain method. ' In particular, problems relating to inclusions and dislocations are most effectively analyzed by this method, and therefore, special emphasis is placed on these topics.
Download or read book Electrons in Solids written by Richard A Dunlap and published by Morgan & Claypool Publishers. This book was released on 2019-10-24 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: The transport of electric charge through most materials is well described in terms of their electronic band structure. The present book deals with two cases where the charge transport in a solid is not described by the simple band structure picture of the solid. These cases are related to the phenomena of the quantum Hall effect and superconductivity. Part I of this book deals with the quantum Hall effect, which is a consequence of the behavior of electrons in solids when they are constrained to move in two dimensions. Part II of the present volume describes the behavior of superconductors, where electrons are bound together in Cooper pairs and travel through a material without resistance.
Download or read book Understanding Solid State Physics written by Sharon Ann Holgate and published by CRC Press. This book was released on 2021-04-21 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Keeping the mathematics to a minimum yet losing none of the required rigor, Understanding Solid State Physics, Second Edition clearly explains basic physics principles to provide a firm grounding in the subject. This new edition has been fully updated throughout, with recent developments and literature in the field, including graphene and the use of quasicrystalline materials, in addition to featuring new journalistic boxes and the reciprocal lattice. The author underscores the technological applications of the physics discussed and emphasizes the multidisciplinary nature of scientific research. After introducing students to solid state physics, the text examines the various ways in which atoms bond together to form crystalline and amorphous solids. It also describes the measurement of mechanical properties and the means by which the mechanical properties of solids can be altered or supplemented for particular applications. The author discusses how electromagnetic radiation interacts with the periodic array of atoms that make up a crystal and how solids react to heat on both atomic and macroscopic scales. She then focuses on conductors, insulators, semiconductors, and superconductors, including some basic semiconductor devices. The final chapter addresses the magnetic properties of solids as well as applications of magnets and magnetism. This accessible textbook provides a useful introduction to solid state physics for undergraduates who feel daunted by a highly mathematical approach. By relating the theories and concepts to practical applications, it shows how physics is used in the real world. Key features: Fully updated throughout, with new journalistic boxes and recent applications Uses an accessible writing style and format, offering journalistic accounts of interesting research, worked examples, self-test questions, and a helpful glossary of frequently used terms Highlights various technological applications of physics, from locomotive lights to medical scanners to USB flash drives A Solutions Manual is available for qualifying course adoptions and can be requested under the Support Material tab. There is also a dedicated Companion Website available with further student and instructor resources.
Download or read book Viscoelastic Solids 1998 written by Roderic S. Lakes and published by CRC Press. This book was released on 2017-11-22 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscoelastic Solids covers the mathematical theory of viscoelasticity and physical insights, causal mechanisms, and practical applications. The book: presents a development of the theory, addressing both transient and dynamic aspects as well as emphasizing linear viscoelasticity synthesizes the structure of the theory with the aim of developing physical insight illustrates the methods for the solution of stress analysis problems in viscoelastic objects explores experimental methods for the characterization of viscoelastic materials describes the phenomenology of viscoelasticity in a variety of materials, including polymers, metals, high damping alloys, rock, piezoelectric materials, cellular solids, dense composite materials, and biological materials analyzes high damping and extremely low damping provides the theory of viscoelastic composite materials, including examples of various types of structure and the relationships between structure and mechanical properties contains examples on the use of viscoelastic materials in preventing and alleviating human suffering Viscoelastic Solids also demonstrates the use of viscoelasticity for diverse applications, such as earplugs, gaskets, computer disks, satellite stability, medical diagnosis, injury prevention, vibration abatement, tire performance, sports, spacecraft explosions, and music.
Download or read book Micromechanics of defects in solids written by Toshio Mura and published by Springer. This book was released on 2014-03-14 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sterns from a course on Micromechanics that I started about fifteen years ago at Northwestern University. At that time, micro mechanics was a rather unfamiliar subject. Although I repeated the course every year, I was ne ver convinced that my notes have quite developed into a final manuscript because new topics emerged con stantly requiring revisions, and additions. I finally came to realize that if this is continued, then I will never complete the book to my total satisfaction. Meanwhile, T. Mori and I had coauthored a book in Micromechanics, published by Baifu-kan, Tokyo, in Japanese, entitled 1975. It received an extremely favorable response from students and researchers in Japan. This encouraged me to go ahead and publish my course notes in their latest version, as this book, which contains further development of the subject and is more comprehensive than the one published in Japanese. Micromechanics encompasses mechanics related to microstructures of materials. The method employed is a continuum theory of elasticity yet its applications cover a broad area relating to the mechanical behavior of materials: plasticity, fracture and fatigue, constitutive equa tions, composite materials, polycrystals, etc. These subjects are treated in this book by means of a powerful and unified method which is called the 'eigenstrain method. ' In particular, problems relating to inclusions and dislocations are most effectively analyzed by this method, and therefore, special emphasis is placed on these topics.
Download or read book Micromagnetism and the Microstructure of Ferromagnetic Solids written by Helmut Kronmüller and published by Cambridge University Press. This book was released on 2009-10-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a fundamental introduction to microstructure magnetic property relations where microstructures on atomic, nano- and micrometer scales are considered. The authors demonstrate that outstanding magnetic properties require an optimization of microstructural properties where the microstructures in crystalline materials are point defects and dislocations as well as grain and phase boundaries. In amorphous alloys the type of microstructures on atomic scales are defined and used to describe intrinsic and extrinsic properties.
Download or read book The M ssbauer Effect written by Richard A. Dunlap and published by Morgan & Claypool Publishers. This book was released on 2019-04-19 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect which now bears his name, was discovered in 1958 by Rudolf Mössbauer at the Technical University of Munich. At first, this appeared to be a phenomenon related to nuclear energy levels that provided some information about excited state lifetimes and quantum properties. However, it soon became apparent that Mössbauer spectroscopy had applications in such diverse fields as general relativity, solid state physics, chemistry, materials science, biology, medical physics, archeology and art. It is the extreme sensitivity of the effect to the atomic environment around the probe atom as well as the ability to apply the technique to some interesting and important elements, most notably iron, that is responsible for the Mössbauer effect's extensive use. The present volume reviews the historical development of the Mössbauer effect, the experimental details, the basic physics of hyperfine interactions and some of the numerous applications of Mössbauer effect spectroscopy.
Download or read book Lasers and Their Application to the Observation of Bose Einstein Condensates written by Richard A Dunlap and published by Morgan & Claypool Publishers. This book was released on 2019-09-04 with total page 103 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first part of this book overviews the physics of lasers and describes some of the more common types of lasers and their applications. Applications of lasers include CD/DVD players, laser printers and fiber optic communication devices. Part II of this book describes the phenomenon of Bose-Einstein condensation. The experimental techniques used to create a Bose-Einstein condensate provide an interesting and unconventional application of lasers; that is, the cooling and confinement of a dilute gas at very low temperature.
Download or read book Renewable Energy written by Richard A Dunlap and published by Springer Nature. This book was released on 2022-06-01 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume considers various methods of energy storage that make use of electrochemical reactions, electric and magnetic fields, and chemical reactions. This book begins with a consideration of the use of batteries as a means of storing electrical energy. Various common battery chemistries are presented along with a summary of common battery sizes. The electrochemistry of a lithium-ion (Li-ion) cell is discussed in detail. Sodium-based batteries are discussed, as are vanadium flow batteries. The applications of batteries for energy storage are overviewed, concentrating on transportation technologies and grid-scale storage. Methods for storing energy in the form of electric fields include the use of supercapacitors and superconducting coils. The design of capacitors, including supercapacitors, pseudocapacitors, and hybrid capacitors is presented. The applications of supercapacitors for high-power, short-term energy storage are discussed. The use of superconducting magnets to store large amounts of electrical energy without resistive loss is presented. The application of superconducting electrical storage for grid stability is considered. Final chemical energy storage techniques are considered. The use of hydrogen as an energy carrier is discussed in detail. The concept of a future hydrogen economy has been popular in recent years. This volume considers the efficiency of such an approach. Other chemical energy carriers, such as methane, methanol, and ammonia, are discussed.
Download or read book Cutting Edge Technologies written by National Academy of Engineering and published by National Academies Press. This book was released on 1984-02-01 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experts in computers, biotechnology, structural materials, and transportation provide a concise introduction to the promising technologies in these four exciting fields that affect all of society. Each section begins with a brief overview of the field, followed by more detailed papers describing specific technological advances, their current and projected applications, and the obstacles that must be overcome to ensure future progress.
Download or read book Mechanical Properties and Deformation Behavior of Materials Having Ultra Fine Microstructures written by M. Nastasi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an attempt to meet the demand for new ultra-high strength materials, the processing of novel material configurations with unique microstructure is being explored in systems which are further and further from equilibrium. One such class of emerging materials is the so-called nanophased or nanostructured materials. This class of materials includes metals and alloys, ceramics, and polymers characterized by controlled ultra-fine microstructural features in the form oflayered, fibrous, or phase and grain distribution. While it is clear that these materials are in an early stage of development, there is now a sufficient body of literature to fuel discussion of how the mechanical properties and deformation behavior can be controlled through control of the microstructure. This NATO-Advanced Study Institute was convened in order to assess our current state of knowledge in the field of mechanical properties and deformation behavior in materials with ultra fine microstructure, to identify opportunities and needs for further research, and to identify the potential for technological applications. The Institute was the first international scientific meeting devoted to a discussion on the mechanical properties and deformation behavior of materials having grain sizes down to a few nanometers. Included in these discussions were the topics of superplasticity, tribology, and the supermodulus effect. Lectures were also presented which covered a variety of other themes including synthesis, characterization, thermodynamic stability, and general physical properties.
Download or read book The Quantitative Description of the Microstructure of Materials written by Krzysztof Jan Kurzydlowski and published by CRC Press. This book was released on 1995-07-21 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, the product of a deep collaboration between the two authors, strikes a balance between the traditional approach and newly emerging techniques used to obtain a quantitative description of the microstructure of materials. The Quantitative Description of the Microstructure of Materials has a unique format that sets it apart from other books. The first half of the book gives a comprehensive account of the entire quantification process and presents material in a pedagogical style. Numerous examples appear throughout text to illustrate the methodology. A general introduction to the subject and basic concepts, definitions, techniques, and relationships are provided. Aspects of modern stereology are described in detail. Image processing, computer aided procedures of data analysis, and the elements of a system for image analysis also are discussed at length. The remaining chapters treat a series of significant examples in much more detail. This part of text offers information in an easy-to-access reference style, making it extremely useful as a guide to active researchers in the quantification guide. Topics include dislocations, internal and external surfaces, and quantitative characterization of thin film structures. The book covers geometry of grains and its effect on the properties of polycrystals. Particles, pores, and other isolated volumetric elements of the microstructure also are discussed.
