Download or read book Intermediate Temperature Solid Oxide Fuel Cells written by Gurbinder Kaur and published by Elsevier. This book was released on 2019-11-21 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermediate Temperature Solid Oxide Fuel Cells: Electrolytes, Electrodes and Interconnects introduces the fundamental principles of intermediate solid oxide fuel cells technology. It provides the reader with a broad understanding and practical knowledge of the electrodes, pyrochlore/perovskite/oxide electrolytes and interconnects which form the backbone of the Solid Oxide Fuel Cell (SOFC) unit. Opening with an introduction to the thermodynamics, physiochemical and electrochemical behavior of Solid Oxide Fuel Cells (SOFC), the book also discusses specific materials, including low temperature brownmillerites and aurivillius electrolytes, as well as pyrochlore interconnects. This book analyzes the basic concepts, providing cutting-edge information for both researchers and students. It is a complete reference for Intermediate Solid Oxide Fuel Cells technology that will be a vital resource for those working in materials science, fuel cells and solid state chemistry. - Provides a single source of information on glass, electrolytes, interconnects, vanadates, pyrochlores and perovskite SOFC - Includes illustrations that provide a clear visual explanation of concepts being discussed - Progresses from a discussion of basic concepts that will enable readers to easily comprehend the subject matter

Download or read book Energy Production and Storage written by Robert H. Crabtree and published by John Wiley & Sons. This book was released on 2013-02-19 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy production and storage are central problems for our time. In principle, abundant energy is available from the sun to run the earth in a sustainable way. Solar energy can be directly harnessed by agricultural and photovoltaic means, but the sheer scale of the energy demand poses severe challenges, for example any major competition between biomass production and food production would simply transfer scarcity from energy to food. Indirect use of solar energy in the form of wind looks also promising, especially for those regions not blessed with abundant sunlight. Other modes such as tidal and wave energy may well become important niche players. Inorganic chemistry plays a decisive role in the development of new energy technologies and this Volume covers some promising modes of alternative energy production and storage that minimize the atmospheric burden of fossil-derived carbon monoxide. No one production or storage mode is likely to dominate, at least at first, and numerous possibilities need to be explored to compare their technical feasibility and economics. This provides the context for a broad exploration of novel ideas that we are likely to see in future years as the field expands. This Volume covers a wide range of topics, such as: - Water splitting, only water is a sufficiently cheap and abundant electron source for global exploitation; - Energy conversion by photosynthesis; - Molecular catalysts for water splitting; - Thermochemical water splitting; - Photocatalytic hydrogen production; - Artificial photosynthesis, progress of the Swedish Consortium; - Hydrogen economy; - Reduction of carbon dioxide to useful fuels; - Conversion of methane to methanol; - Dye sensitized solar cells; - Photoinitiated electron transfer in fuel cells; - Proton exchange membranes for fuel cells; - Intermediate temperature solid oxide fuel cells; - Direct Ethanol fuel cells; - Molecular catalysis for fuel cells; - Enzymes and microbes in fuel cells; - Li-Ion batteries; - Magic Angle Spinning NMR studies of battery materials; Supercapacitors and electrode materials. About EIC Books The Encyclopedia of Inorganic Chemistry (EIC) has proved to be one of the defining standards in inorganic chemistry, and most chemistry libraries around the world have access either to the first or second print edition, or to the online version. Many readers, however, prefer to have more concise thematic volumes, targeted to their specific area of interest. This feedback from EIC readers has encouraged the Editors to plan a series of EIC Books, focusing on topics of current interest. They will appear on a regular basis, and will feature leading scholars in their fields. Like the Encyclopedia, EIC Books aim to provide both the starting research student and the confirmed research worker with a critical distillation of the leading concepts in inorganic and bioinorganic chemistry, and provide a structured entry into the fields covered. This volume is also available as part of Encyclopedia of Inorganic Chemistry, 5 Volume Set. This set combines all volumes published as EIC Books from 2007 to 2010, representing areas of key developments in the field of inorganic chemistry published in the Encyclopedia of Inorganic Chemistry. Find out more.

Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2540 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Gas Transport in Solid Oxide Fuel Cells written by Weidong He and published by Springer. This book was released on 2014-09-03 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of contemporary research and emerging measurement technologies associated with gas transport in solid oxide fuel cells. Within these pages, an introduction to the concept of gas diffusion in solid oxide fuel cells is presented. This book also discusses the history and underlying fundamental mechanisms of gas diffusion in solid oxide fuel cells, general theoretical mathematical models for gas diffusion, and traditional and advanced techniques for gas diffusivity measurement.

Download or read book Ceramic Conductors written by Maria Gazda and published by MDPI. This book was released on 2019-05-24 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue of Crystals contains papers focusing on various properties of conducting ceramics. Multiple aspects of both the research and application of this group of materials have been addressed. Conducting ceramics are the wide group of mostly oxide materials which play crucial roles in various technical applications, especially in the context of the harvesting and storage of energy. Without ion-conducting oxides, such as yttria-stabilized zirconia, doped ceria devices such as solid oxide fuel cells would not exist, not to mention the wide group of other ion conductors which can be applied in batteries or even electrolyzers, besides fuel cells. The works published in this Special Issue tackle experimental results as well as general theoretical trends in the field of ceramic conductors, or electroceramics, as it is often referred to.

Download or read book High temperature Solid Oxide Fuel Cells Fundamentals Design and Applications written by S.C. Singhal and published by Elsevier. This book was released on 2003-12-08 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications provides a comprehensive discussion of solid oxide fuel cells (SOFCs). SOFCs are the most efficient devices for the electrochemical conversion of chemical energy of hydrocarbon fuels into electricity, and have been gaining increasing attention for clean and efficient distributed power generation. The book explains the operating principle, cell component materials, cell and stack designs and fabrication processes, cell and stack performance, and applications of SOFCs. Individual chapters are written by internationally renowned authors in their respective fields, and the text is supplemented by a large number of references for further information. The book is primarily intended for use by researchers, engineers, and other technical people working in the field of SOFCs. Even though the technology is advancing at a very rapid pace, the information contained in most of the chapters is fundamental enough for the book to be useful even as a text for SOFC technology at the graduate level.

Download or read book Encyclopedia of Renewable and Sustainable Materials written by and published by Elsevier. This book was released on 2020-01-09 with total page 4238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Renewable and Sustainable Materials, Five Volume Set provides a comprehensive overview, covering research and development on all aspects of renewable, recyclable and sustainable materials. The use of renewable and sustainable materials in building construction, the automotive sector, energy, textiles and others can create markets for agricultural products and additional revenue streams for farmers, as well as significantly reduce carbon dioxide (CO2) emissions, manufacturing energy requirements, manufacturing costs and waste. This book provides researchers, students and professionals in materials science and engineering with tactics and information as they face increasingly complex challenges around the development, selection and use of construction and manufacturing materials. Covers a broad range of topics not available elsewhere in one resource Arranged thematically for ease of navigation Discusses key features on processing, use, application and the environmental benefits of renewable and sustainable materials Contains a special focus on sustainability that will lead to the reduction of carbon emissions and enhance protection of the natural environment with regard to sustainable materials

Download or read book Perovskite Oxide for Solid Oxide Fuel Cells written by Tatsumi Ishihara and published by Springer Science & Business Media. This book was released on 2009-06-12 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cell technology is quite promising for conversion of chemical energy of hydrocarbon fuels into electricity without forming air pollutants. There are several types of fuel cells: polymer electrolyte fuel cell (PEFC), phosphoric acid fuel cell (PAFC), molten carbonate fuel cell (MCFC), solid oxide fuel cell (SOFC), and alkaline fuel cell (AFC). Among these, SOFCs are the most efficient and have various advantages such as flexibility in fuel, high reliability, simple balance of plant (BOP), and a long history. Therefore, SOFC technology is attracting much attention as a power plant and is now close to marketing as a combined heat and power generation system. From the beginning of SOFC development, many perovskite oxides have been used for SOFC components; for example, LaMnO -based oxide for the cathode and 3 LaCrO for the interconnect are the most well known materials for SOFCs. The 3 current SOFCs operate at temperatures higher than 1073 K. However, lowering the operating temperature of SOFCs is an important goal for further SOFC development. Reliability, durability, and stability of the SOFCs could be greatly improved by decreasing their operating temperature. In addition, a lower operating temperature is also beneficial for shortening the startup time and decreasing energy loss from heat radiation. For this purpose, faster oxide ion conductors are required to replace the conventional Y O -stabilized ZrO 2 3 2 electrolyte. A new class of electrolytes such as LaGaO is considered to be 3 highly useful for intermediate-temperature SOFCs.

Download or read book Hydrogen Storage Materials written by R. G. Barnes and published by . This book was released on 1988 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ames Laboratory, Iowa, USA

Download or read book High Temperature Solid Oxide Fuel Cells for the 21st Century written by Kevin Kendall and published by Elsevier. This book was released on 2015-11-21 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-temperature Solid Oxide Fuel Cells, Second Edition, explores the growing interest in fuel cells as a sustainable source of energy. The text brings the topic of green energy front and center, illustrating the need for new books that provide comprehensive and practical information on specific types of fuel cells and their applications. This landmark volume on solid oxide fuel cells contains contributions from experts of international repute, and provides a single source of the latest knowledge on this topic. - A single source for all the latest information on solid oxide fuel cells and their applications - Illustrates the need for new, more comprehensive books and study on the topic - Explores the growing interest in fuel cells as viable, sustainable sources of energy

Download or read book Science and Technology of Ceramic Fuel Cells written by N.Q. Minh and published by Elsevier. This book was released on 1995-08-15 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic fuel cells, commonly known as solid oxide fuel cells (SOFCs), have been under development for a broad range of electric power generation applications. The most attractive feature of the SOFC is its clean and efficient production of electricity from a variety of fuels. The SOFC has the potential to be manufactured and operated cost-effectively. The widening interest in this technology, thus, arises from the continuing need to develop cleaner and more efficient means of converting energy sources into useful forms.This topical book provides a comprehensive treatise on solid oxide fuel cells and succeeds successfully in filling the gap in the market for a reference book in this field. Directed towards scientists, engineers, and technical managers working with SOFCs as well as ceramic devices based on conducting materials, and in related fields, the book will also be invaluable as a textbook for science and engineering courses.

Download or read book Ceramic Abstracts written by and published by . This book was released on 1999 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Solid Oxide Fuel Cell SOFC Materials written by R. Saravanan and published by Materials Research Forum LLC. This book was released on 2018-01-15 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing materials for SOFC applications is one of the key topics in energy research. The book focuses on manganite structured materials, such as doped lanthanum chromites and lanthanum manganites, which have interesting properties: thermal and chemical stability, mixed ionic and electrical conductivity, electrocatalytic activity, magnetocaloric property and colossal magnetoresistance (CMR). These materials have applications in solid oxide fuel cells, high temperature NOx sensors, hard disk read heads, magnetic sensors and magnetoresistive random access memories. For the first time, the charge density distributions have been studied in these materials as synthesized by high temperature solid state reaction. Charge density analysis is helpful in understanding the physical and chemical properties of materials and in developing optimized structures. The morphological, elemental, optical and magnetic properties of the materials have also been studied. Solid Oxide Fuel Cells, SOFC, Manganite Structured Materials, Lanthanum Chromites, Lanthanum Manganites, Electrocatalytic Activity, Magnetocaloric Property, Colossal Magnetoresistance, High Temperature NOx Sensors, Hard Disk Read Heads, Magnetic Sensors, Magnetoresistive Random Access Memories, Charge Density Distribution

Download or read book Perovskite Materials written by Likun Pan and published by BoD – Books on Demand. This book was released on 2016-02-03 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes the current state of the know-how in the field of perovskite materials: synthesis, characterization, properties, and applications. Most chapters include a review on the actual knowledge and cutting-edge research results. Thus, this book is an essential source of reference for scientists with research fields in energy, physics, chemistry and materials. It is also a suitable reading material for graduate students.

Download or read book Advances in Solid Oxide Fuel Cells VII Volume 32 Issue 4 written by Narottam P. Bansal and published by John Wiley & Sons. This book was released on 2011-10-24 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the 8th International Symposium on Solid Oxide Fuel Cells: Materials, Science, and Technology on topics such as Cell and Stack Development; Electrochemical/Mechanical/Thermal Performance; Electrodes; Interconnects; Novel Cell/Stack Design and Processing; and Reliability/Degradation.

Download or read book Solid Oxide Fuel Cell Technology written by K Huang and published by Elsevier. This book was released on 2009-07-30 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature solid oxide fuel cell (SOFC) technology is a promising power generation option that features high electrical efficiency and low emissions of environmentally polluting gases such as CO2, NOox and SOx. It is ideal for distributed stationary power generation applications where both high-efficiency electricity and high-quality heat are in strong demand. For the past few decades, SOFC technology has attracted intense worldwide R&D effort and, along with polymer electrolyte membrane fuel cell (PEMFC) technology, has undergone extensive commercialization development.This book presents a systematic and in-depth narrative of the technology from the perspective of fundamentals, providing comprehensive theoretical analysis and innovative characterization techniques for SOFC technology. The book initially deals with the basics and development of SOFC technology from cell materials to fundamental thermodynamics, electronic properties of solids and charged particle transport. This coverage is extended with a thorough analysis of such operational features as current flow and energy balance, and on to voltage losses and electrical efficiency. Furthermore, the book also covers the important issues of fuel cell stability and durability with chapters on performance characterization, fuel processing, and electrode poisoning. Finally, the book provides a comprehensive review for SOFC materials and fabrication techniques. A series of useful scientific appendices rounds off the book.Solid oxide fuel cell technology is a standard reference for all those researching this important field as well as those working in the power industry. - Provides a comprehensive review of solid oxide fuel cells from history and design to chemistry and materials development - Presents analysis of operational features including current flow, energy balance, voltage losses and electrical efficiency - Explores fuel cell stability and durability with specific chapters examining performance characterization, fuel processing and electrode poisoning

Download or read book Proceedings of the 25th Intersociety Energy Conversion Engineering Conference Electrochemical conversion and new technologies for energy utilization written by Intersociety Energy Conversion Engineering Conference and published by . This book was released on 1990 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: