Download or read book Notes Introductory to the Theory and Design of Gas Turbines Etc written by James Small (Professor of Theory and Practice of Heat Engines in the University of Glasgow.) and published by . This book was released on 1947 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Notes Introductory to the Theory and Design of Gas Turbines written by James Small and published by . This book was released on 1947 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine Engineering Handbook written by Meherwan P. Boyce and published by Elsevier. This book was released on 2017-09-01 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Gas Turbine Engineering Handbook has been the standard for engineers involved in the design, selection, and operation of gas turbines. This revision includes new case histories, the latest techniques, and new designs to comply with recently passed legislation. By keeping the book up to date with new, emerging topics, Boyce ensures that this book will remain the standard and most widely used book in this field. The new Third Edition of the Gas Turbine Engineering Hand Book updates the book to cover the new generation of Advanced gas Turbines. It examines the benefit and some of the major problems that have been encountered by these new turbines. The book keeps abreast of the environmental changes and the industries answer to these new regulations. A new chapter on case histories has been added to enable the engineer in the field to keep abreast of problems that are being encountered and the solutions that have resulted in solving them. Comprehensive treatment of Gas Turbines from Design to Operation and Maintenance. In depth treatment of Compressors with emphasis on surge, rotating stall, and choke; Combustors with emphasis on Dry Low NOx Combustors; and Turbines with emphasis on Metallurgy and new cooling schemes. An excellent introductory book for the student and field engineers A special maintenance section dealing with the advanced gas turbines, and special diagnostic charts have been provided that will enable the reader to troubleshoot problems he encounters in the field The third edition consists of many Case Histories of Gas Turbine problems. This should enable the field engineer to avoid some of these same generic problems
Download or read book The Theory and Design of Gas Turbines and Jet Engines written by E. T. Vincent and published by . This book was released on 1951 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Gas Turbine Theory written by Klaus Brun and published by . This book was released on 2019-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was developed directly from a series of Solar Turbines Incorporated internal short courses that were presented to an audience with a wide range of technical backgrounds, not necessarily related to turbomachinery. Thus, functional principles and physical understanding are emphasized, rather than the derivation of complicated mathematical equations. While the focus of this book is gas turbine theory, it is not intended to provide an in-depth knowledge of gas turbine aerodynamics or thermodynamics, nor is it intended to make the reader an expert in the field of turbomachinery. Readers will benefit from the many topics and theories that pertain to the subject matter.The text emphasizes simplified explanations of complex physical theories. Hopefully, readers will utilize this book to develop an appreciation of the many engineering disciplines that are involved in the design and analysis of gas turbines. Readers are also encouraged to further investigate a wide range of topics by studying more specific, subject-matter literature.
Download or read book Gas Turbines written by Claire Soares and published by Elsevier. This book was released on 2014-10-23 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering basic theory, components, installation, maintenance, manufacturing, regulation and industry developments, Gas Turbines: A Handbook of Air, Sea and Land Applications is a broad-based introductory reference designed to give you the knowledge needed to succeed in the gas turbine industry, land, sea and air applications.Providing the big picture view that other detailed, data-focused resources lack, this book has a strong focus on the information needed to effectively decision-make and plan gas turbine system use for particular applications, taking into consideration not only operational requirements but long-term life-cycle costs in upkeep, repair and future use.With concise, easily digestible overviews of all important theoretical bases and a practical focus throughout, Gas Turbines is an ideal handbook for those new to the field or in the early stages of their career, as well as more experienced engineers looking for a reliable, one-stop reference that covers the breadth of the field. Covers installation, maintenance, manufacturer's specifications, performance criteria and future trends, offering a rounded view of the area that takes in technical detail as well as well as industry economics and outlook Updated with the latest industry developments, including new emission and efficiency regulations and their impact on gas turbine technology Over 300 pages of new/revised content, including new sections on microturbines, non-conventional fuel sources for microturbines, emissions, major developments in aircraft engines, use of coal gas and superheated steam, and new case histories throughout highlighting component improvements in all systems and sub-systems
Download or read book The Theory and Design of Gas Turbines and Jet Engines Stichworte Teil 1 written by E. T. Vincent and published by . This book was released on 1950 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design of High Efficiency Turbomachinery and Gas Turbines second edition with a new preface written by David Gordon Wilson and published by MIT Press. This book was released on 2014-09-12 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive textbook that introduces turbomachinery and gas turbines through design methods and examples. This comprehensive textbook is unique in its design-focused approach to turbomachinery and gas turbines. It offers students and practicing engineers methods for configuring these machines to perform with the highest possible efficiency. Examples and problems are based on the actual design of turbomachinery and turbines. After an introductory chapter that outlines the goals of the book and provides definitions of terms and parts, the book offers a brief review of the basic principles of thermodynamics and efficiency definitions. The rest of the book is devoted to the analysis and design of real turbomachinery configurations and gas turbines, based on a consistent application of thermodynamic theory and a more empirical treatment of fluid dynamics that relies on the extensive use of design charts. Topics include turbine power cycles, diffusion and diffusers, the analysis and design of three-dimensional free-stream flow, and combustion systems and combustion calculations. The second edition updates every chapter, adding material on subjects that include flow correlations, energy transfer in turbomachines, and three-dimensional design. A solutions manual is available for instructors. This new MIT Press edition makes a popular text available again, with corrections and some updates, to a wide audience of students, professors, and professionals.
Download or read book The Theory and Design of Gas Turbines and Jet Engines written by Edward Thomas Vincent and published by . This book was released on 1950 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beskriver teorien bag og den gennerelle indretning af gasturbine- og jetmotorer. Egnet til undervisningsbrug.
Download or read book Gas Turbine Theory written by G.F.C. Rogers and published by Pearson Higher Ed. This book was released on 2017-06-07 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: When the First Edition of this book was written in 1951, the gas turbine was just becoming established as a powerplant for military aircraft. It took another decade before the gas turbine was introduced to civil aircraft, and this market developed so rapidly that the passenger liner was rendered obsolete. Other markets like naval propulsion, pipeline compression and electrical power applications grew steadily. In recent years the gas turbine, in combination with the steam turbine, has played an ever-increasing role in power generation. Despite the rapid advances in both output and efficiency, the basic theory of the gas turbine has remained unchanged. The layout of this new edition is broadly similar to the original, but greatly expanded and updated, comprising an outline of the basic theory, aerodynamic design of individual components, and the prediction of off-design performance. The addition of a chapter devoted to the mechanical design of gas turbines greatly enhances the scope of the book. Descriptions of engine developments and current markets make this book useful to both students and practising engineers.
Download or read book Introduction to Gas Turbine Theory written by Klaus Brun and published by . This book was released on 2004 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbines for Electric Power Generation written by S. Can Gülen and published by Cambridge University Press. This book was released on 2019-02-14 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Everything you wanted to know about industrial gas turbines for electric power generation in one source with hard-to-find, hands-on technical information.
Download or read book Gas Turbines Structural Properties Operation Principles and Design Features written by Kun Liu and published by Springer Nature. This book was released on 2023-05-29 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a clear idea about the concept of gas turbines, thermodynamic basics of the turbine theory. It includes classification of gas turbines, working principle, structure feather, application and designing approaches of gas turbines. The readers will understand easily the power system for ships since there are a lot illustrations and instruction for each of equipment. It also introduces the thermal calculation of gas turbine unit, different structure feather of compressor, combustion chamber and turbine. It gives the way to increases the efficiency of the unit, design and operation of the gas turbine parts. The combined marine power plant with gas turbine is discussed and advantages and disadvantages for each type unit is discussed too.
Download or read book Principles of Turbomachinery in Air Breathing Engines written by Erian A. Baskharone and published by Cambridge University Press. This book was released on 2006-07-31 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for advanced undergraduate and graduate students in mechanical and aerospace engineering taking a course commonly called Principles of Turbomachinery or Aerospace Propulsion. The book begins with a review of basic thermodynamics and fluid mechanics principles to motive their application to aerothermodynamics and real-life design issues. This approach is ideal for the reader who will face practical situations and design decisions in the gas turbine industry. The text is fully supported by over 200 figures, numerous examples, and homework problems.
Download or read book Gas Turbine Theory written by Cohen and published by Pearson Education India. This book was released on 2001-09 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Turbine Design Components and System Design Integration written by Meinhard T. Schobeiri and published by Springer. This book was released on 2017-06-06 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation.This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industry professionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.
Download or read book Handbook of Theory and Design of Gas Turbines and Jet Engines written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
