Download or read book Low Cycle Fatigue written by Harvey D. Solomon and published by ASTM International. This book was released on 1988 with total page 1289 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Fatigue written by R.P. Skelton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: About 35 years ago, thermal fatigue was identified as an important phenomenon which limited the lifetime of high temperature plant. In the intervening years many investigations have been carried out, primarily to give guidance on likely endurance (especially in the presence of time dependent deformation) but latterly, with the introduction of sophisticated testing machines, to provide knowledge of the underlying mechanisms of failure. A previous edited book (Fatigue at High Temperature, Elsevier Applied Science Publishers, 1983) summarised the state-of-the-art of high temperature fatigue testing and examined the factors influencing life, such as stress state, environment and microstructural effects. It also considered, in some detail, cyclic crack growth as a more rigorous approach to life limitation. The aim of the present volume (which in style and format follows exactly the same lines as its predecessor) is once again to pursue the desire to translate detailed laboratory knowledge into engineering design and assessment. There is, for example, a need to consider the limitations of the laboratory specimen and its relationship with engineering features. Many design procedures still rely on a simple endurance approach based on failure of a smooth specimen, and this is taken to indicate crack initiation in the component. In this volume, therefore, crack propagation is covered only incidentally, emphasis being placed instead on basic cyclic stress strain properties, non-isothermal behaviour, metallography, failure criteria and the need for agreed testing procedures.
Download or read book Low Cycle Fatigue and Elasto Plastic Behaviour of Materials 3 written by K.T. Rie and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 911 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceeds of the Third International Conference on Low Cycle Fatigue and Elasto-plastic Behaviour of Materials, Berlin Congress Center, Berlin, Germany, 7-11 September 1992
Download or read book Low Cycle Fatigue and Elasto Plastic Behaviour of Materials written by K.T. Rie and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1979 the first InternationalSymposium on Low CycleFatigue and Elasto-Plastic Behaviour of Materials was held in Stuttgart, FRG. Since then research in low cycle fatigue has proceeded rapidly. The vital interest of engineers and researchers in communicating the rapid advances in the ongoing research in low cycle fatigue has encouraged me to initiate again the Second International Conference which was held in Munich, FRG, 7-11 September 1987. Failure in low cycle fatigue represents a serious problem in the design and opera tion of highly stressed structures. Under complex loading and environmental cir cumstances, especially for high temperature services, reliable life prediction can not be expected without detailed consideration of the failure mechanism and with out extensive use of mechanistic approaches. The purpose of this conference was to provide a forum to discuss the advances in recent research in the field of low cycle fatigue. The conference was intended to help to further bridge the gap between those who are involved in basic research, and the engineers who have to perform the design of highly stressed structural components.
Download or read book Fusion Technology 1996 written by C. Varandas and published by Elsevier. This book was released on 2012-12-02 with total page 1057 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of these proceedings was to provide a platform for the exchange of information on the design, construction and operation of fusion experiments. The technology which is being developed for the next step devices and fusion reactors was also covered.
Download or read book Mechanical Properties and Working of Metals and Alloys written by Amit Bhaduri and published by Springer. This book was released on 2018-05-12 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as core text or handy reference on two key areas of metallic materials: (i) mechanical behavior and properties evaluated by mechanical testing; and (ii) different types of metal working or forming operations to produce useful shapes. The book consists of 16 chapters which are divided into two parts. The first part contains nine chapters which describe tension (including elastic stress – strain relation, relevant theory of plasticity, and strengthening methods), compression, hardness, bending, torsion – pure shear, impact loading, creep and stress rupture, fatigue, and fracture. The second part is composed of seven chapters and covers fundamentals of mechanical working, forging, rolling, extrusion, drawing of flat strip, round bar, and tube, deep drawing, and high-energy rate forming. The book comprises an exhaustive description of mechanical properties evaluated by testing of metals and metal working in sufficient depth and with reasonably wide coverage. The book is written in an easy-to-understand manner and includes many solved problems. More than 150 numerical problems and many multiple choice questions as exercise along with their answers have also been provided. The mathematical analyses are well elaborated without skipping any intermediate steps. Slab method of analysis or free-body equilibrium approach is used for the analytical treatment of mechanical working processes. For hot working processes, different frictional conditions (sliding, sticking and mixed sticking–sliding) have been considered to estimate the deformation loads. In addition to the slab method of analysis, this book also contains slip-line field theory, its application to the static system, and the steady state motion, Further, this book includes upper-bound theorem, and upper-bound solutions for indentation, compression, extrusion and strip drawing. The book can be used to teach graduate and undergraduate courses offered to students of mechanical, aerospace, production, manufacturing and metallurgical engineering disciplines. The book can also be used for metallurgists and practicing engineers in industry and development courses in the metallurgy and metallic manufacturing industries.
Download or read book Low cycle Fatigue and Life Prediction written by C. Amzallag and published by ASTM International. This book was released on 1982 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book hold time effects in high temperature low cycle fatigue written by and published by ASTM International. This book was released on 1971 with total page 37 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Cycle Fatigue written by Theodore Nicholas and published by Elsevier. This book was released on 2006-07-07 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr Theodore Nicholas ran the High Cycle Fatigue Program for the US Air Force between 1995 and 2003 at Wright-Patterson Air Force Base, and is one of the world's leading authorities on the subject, having authored over 250 papers in leading archival journals and books. Bringing his plethora of expertise to this book, Dr Nicholas discusses the subject of high cycle fatigue (HCF) from an engineering viewpoint in response to a series of HCF failures in the USAF and the concurrent realization that HCF failures in general were taking place universally in both civilian and military engines. Topic covered include: - Constant life diagrams - Fatigue limits under combined LCF and HCF - Notch fatigue under HCF conditions - Foreign object damage (FOD) - Brings years of the Author's US Air Force experience in high cycle fatigue together in one text - Discusses HCF in the context of recent international military and civilian engine failures
Download or read book Mechanical Behaviour of Materials V written by M. G. Yan and published by Elsevier. This book was released on 2013-10-22 with total page 1451 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a thorough up-to-date account of the latest developments in materials science and engineering research and applications. The contributed papers cover all aspects of this important field, including material aspects of fracture in engineering practice, fatigue criteria and material characterisation, environmental effects on fracture, high temperature deformation and failure and mechanical properties and engineering applications of composite and non-metallic materials. Contains approximately 200 papers from acknowledged experts.
Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
Download or read book Fatigue at Elevated Temperatures written by and published by ASTM International. This book was released on 1973 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cyclic plasticity modeling and multiaxial fatigue assessment for an austenitic steel written by Jie Fang and published by Herbert Utz Verlag. This book was released on 2015-07-23 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present work aims at engineers and scientists in the field of computational mechanics of materials. The objective of this work is to develop a suitable constitutive law and apply it to study effects of cyclic loading and geometry on the fatigue assessment. Firstly, a systematical investigation on the mechanic behaviors of an austenitic stainless steel is carried out. Different multiaxial fatigue life prediction models are studied to assess fatigue damage. The Karim-Ohno kinematic hardening model is extended to incorporate more complex mechanical behaviors. The proposed constitutive model is implemented into FEM code ABAQUS. Finally a computational fatigue analysis methodology is proposed for performing life prediction of notched components based on elastic-plastic computation.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976 with total page 1292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture and Society written by Masateru Ohnami and published by IOS Press. This book was released on 1992 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: An historical account of experts who have developed the science and technology of the fracture of many kinds of solids. These range from natural materials, such as rock and woods, to artificial structural materials such as those used in space transport.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1988 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
