Download or read book Nondestructive Methods for Detecting Defects in Softwood Logs written by Kristin C. Schad and published by . This book was released on 1996 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood degradation and defects, such as voids and knots, affect the quality and processing time of lumber. The ability to detect internal defects in the log can save mills time and processing costs. In this study, we investigated three nondestructive evaluation techniques for detecting internal wood defects. Sound wave transmission, x-ray computed tomography, and impulse radar were used to examine white spruce and balsam fir logs. Computed tomography resulted in the highest resolution for voids, knots, and high moisture content areas, but at a very high price. Both sound wave transmission and impulse radar were able to detect large voids and areas of degradation, and these techniques showed some sensitivity to very knotty logs. None of the methods was able to detect small pockets of decay. The use of radar requires an experienced operator because of the difficulty of interpreting the data.
Download or read book Nondestructive Methods for Detecting Defects in Softwood Logs written by Kristin C. Schad and published by . This book was released on 1996 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Paper FPL RP written by and published by . This book was released on 1986 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nondestructive Characterization and Imaging of Wood written by Voichita Bucur and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on the Nondestructive Characterization and Imaging of Wood by Professor Voichita Bucur is truly the most outstanding reference on the subject ever written. Since the origins of mankind, wood has played a key role in the history of humans and other living creatures, ranging from provision of life from trees giving air, heat, light, and food to nourish their bodies to structures to protect them from the elements. Wood has also played a key role in one of the world's primary religions. Nondestructive diagnostics methods have long found application in medi cal practice for examination of the human body in order to detect life threatening abnormalities and permit diagnosis to extend life. Nondestructive testing has been used for many years to insure the safety of machinery, air craft, railroads, tunnels, buildings and many other structures. Therefore, it is timely for a treatise, like the present one, to be written describing how wood can be characterized without employing destructive test methods. Since wood is so valuable to mankind, it is important to know the latest methods to nondestructively characterize wood for all practical applications.
Download or read book Canadian Journal of Forest Research written by and published by . This book was released on 2014 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book External and Internal Defect Detection to Optimize Cutting of Hardwood Logs and Lumber written by Sun Joseph Chang and published by . This book was released on 1992 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Zealand Journal of Forestry Science written by and published by . This book was released on 2006 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by United States. Superintendent of Documents and published by . This book was released on 1980 with total page 1268 pages. Available in PDF, EPUB and Kindle. Book excerpt: February issue includes Appendix entitled Directory of United States Government periodicals and subscription publications; September issue includes List of depository libraries; June and December issues include semiannual index
Download or read book Efficient Utilization of Red Maple Lumber in Glued laminated Timber Beams written by John J. Janowiak and published by . This book was released on 1995 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The feasibility of utilizing cant-sawn hardwood lumber, which would not usually be desired for furniture manufacture, was studied for the manufacture of structural glued-laminated (glulam) timber. Two red maple beam combinations were evaluated: (1) a glulam combination designed with E-rated lumber in 25 percent of the outer laminations (top and bottom) and No. 3 grade lumber in 50 percent of the center laminations and (2) a wide-width glulam combination with laminations made from nominal 2- by 4- and 2- by 6-in. No. 2 grade lumber laid edge-to-edge having staggered end joints (termed 2 by 4/2 by 6 glulam combination). Test results of 42 red maple glulam beams showed that it was feasible to develop structural glulam timber from cant-sawn lumber. The glulam combinations made from E-rated lumber exceeded the target design bending stress of 2,400 lb/in2 and met the target modulus of elasticity (MOE) of 1.8 Ã 106 lb/in2. In addition, the 2 by 4/2 by 6 glulam combination exceeded published design stresses for vertically laminated bending strength, MOE in both the horizontally and vertically laminated orientations, and horizontal shear stress in the vertically laminated orientation. Based on the results of the 2 by 4/2 by 6 glulam combination, it was determined that edge gluing the laminations to form wide-width lumber is not required to achieve targeted strength and stiffness levels. Data analysis showed that ASTM D3737 procedures developed for softwood species accurately predict beam stiffness and provide conservative bending and horizontal shear strength estimates for red maple glulam beams. Also, it was shown that results from ASTM D143 shear-block tests could be used to accurately predict horizontal shear strength of 2 by 4 and 2 by 6 red maple glulam beams.
Download or read book Nondestructive Evaluation of Wood written by Forest Service (U S ) and published by Government Printing Office. This book was released on 2015 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nature's engineering of wood through genetics, wind, and weather creates a wide variability in wood as a material. Consequently, manufacture and users of wood products are frequently frustrated in dealing with the forest resource. Manufacturers sometimes argue that wood is difficult to consistently process into quality products because of the wide range of properties that exist in this raw material. Users of wood products can be equally frustrated with the performance variability found in finished products. Nondestructive evaluation (NDE) technologies have contributed significantly toward eliminating the cause of these frustrations. NDE technologies have been developed and are currently used in lumber and veneer grading programs that result in engineered materials that have consistent well-defined performance characteristics. This brief volume explores some of the processes that are used to manufacture wood, including green wood technology and provides a bit of history to wood production and its uses too. Other products that may interest you from the US Forest Service can be found at this link: https://bookstore.gpo.gov/agency/819
Download or read book Ground Penetrating Radar Theory and Applications written by Harry M. Jol and published by Elsevier. This book was released on 2008-12-08 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground-penetrating radar (GPR) is a rapidly developing field that has seen tremendous progress over the past 15 years. The development of GPR spans aspects of geophysical science, technology, and a wide range of scientific and engineering applications. It is the breadth of applications that has made GPR such a valuable tool in the geophysical consulting and geotechnical engineering industries, has lead to its rapid development, and inspired new areas of research in academia. The topic of GPR has gone from not even being mentioned in geophysical texts ten years ago to being the focus of hundreds of research papers and special issues of journals dedicated to the topic. The explosion of primary literature devoted to GPR technology, theory and applications, has lead to a strong demand for an up-to-date synthesis and overview of this rapidly developing field. Because there are specifics in the utilization of GPR for different applications, a review of the current state of development of the applications along with the fundamental theory is required. This book will provide sufficient detail to allow both practitioners and newcomers to the area of GPR to use it as a handbook and primary research reference. *Review of GPR theory and applications by leaders in the field*Up-to-date information and references*Effective handbook and primary research reference for both experienced practitioners and newcomers
Download or read book written by and published by . This book was released on 2005 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Springer Handbook of Wood Science and Technology written by Peter Niemz and published by Springer Nature. This book was released on 2023-04-01 with total page 2064 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an overview on wood science and technology of unparalleled comprehensiveness and international validity. It describes the fundamental wood biology, chemistry and physics, as well as structure-property relations of wood and wood-based materials. The different aspects and steps of wood processing are presented in detail from both a fundamental technological perspective and their realisation in industrial contexts. The discussed industrial processes extend beyond sawmilling and the manufacturing of adhesively bonded wood products to the processing of the various wood-based materials, including pulp and paper, natural fibre materials and aspects of bio-refinery. Core concepts of wood applications, quality and life cycle assessment of this important natural resource are presented. The book concludes with a useful compilation of fundamental material parameters and data as well as a glossary of terms in accordance with the most important industry standards. Written and edited by a truly international team of experts from academia, research institutes and industry, thoroughly reviewed by external colleagues, this handbook is well-attuned to educational demands, as well as providing a summary of state-of-the-art research trends and industrial requirements. It is an invaluable resource for all professionals in research and development, and engineers in practise in the field of wood science and technology.
Download or read book In Situ Assessment of Structural Timber written by Bohumil Kasal and published by Springer Science & Business Media. This book was released on 2011-03-10 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wood is one of the most intriguing structural materials and the only one that is truly renewable. Along with stone, wood is the oldest structural material on the planet and has been extensively used throughout human history. Due to its aesthetical value and positive environmental impact, wood has experienced a renaissance in construction. As a biodegradable, hygroscopic, non-isotropic material, wood presents special challenges for a professional and requires through knowledge ranging from biology to continuum mechanics. This state-of-the-art report reflects the current knowledge in the area of in situ assessment of the physical and mechanical properties of wood structures. Nondestructive, semi-destructive and destructive methods are described in a systematic manner where technology, equipment and limitations are discussed. Some of the discussed methods are used in other materials such as masonry and concrete. Most of the methods, however, are specific to wood and special qualifications are required to understand and apply these methods effectively. Existing methods are constantly improved and new methods are being developed. This report includes methods that are used in practice or have shown significant promise and have a body of knowledge that supports statements made in this report. This is a useable tool for professionals, researchers, educators and students
Download or read book Nondestructive Characterization of Materials IV written by J.F. Bussière and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a great deal of interest in extending nondestructive technologies beyond the location and identification of cracks and voids. Specifically there is growing interest in the application of nondestructive evaluation (NOEl to the measurement of physical and mechanical properties of materials. The measurement of materials properties is often referred to as materials characterization; thus nondestructive techniques applied to characterization become nondestructive characterization (NDCl. There are a number of meetings, proceedings and journals focused upon nondestructive technologies and the detection and identification of cracks and voids. However, the series of symposia, of which these proceedings represent the fourth, are the only meetings uniquely focused upon nondestructive characterization. Moreover, these symposia are especially concerned with stimulating communication between the materials, mechanical and manufacturing engineer and the NDE technology oriented engineer and scientist. These symposia recognize that it is the welding of these areas of expertise that is necessary for practical development and application of NDC technology to measurements of components for in service life time and sensor technology for intelligent processing of materials. These proceedings are from the fourth international symposia and are edited by c.o. Ruud, J. F. Bussiere and R.E. Green, Jr. . The dates, places, etc of the symposia held to date area as follows: Symposia on Nondestructive Methods for TITLE: Material Property Determination DATES: April 6-8, 1983 PLACE: Hershey, PA, USA CHAIRPERSONS: C.O. Ruud and R.E. Green, Jr.
Download or read book Bibliography of Agriculture written by and published by . This book was released on 1998 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Forest Products Journal written by and published by . This book was released on 1984 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
