Download or read book Non Newtonian Flow of Dilute Polymer Solutions written by Gerhard de Wind and published by . This book was released on 1951 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Simulation of Non Newtonian Flow written by M.J. Crochet and published by Elsevier Publishing Company. This book was released on 1984-02 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Simulation of Non-Newtonian Flow focuses on the numerical simulation of non-Newtonian flow using finite difference and finite element techniques. Topics range from the basic equations governing non-Newtonian fluid mechanics to flow classification and finite element calculation of flow (generalized Newtonian flow and viscoelastic flow). An overview of finite difference and finite element methods is also presented. Comprised of 11 chapters, this volume begins with an introduction to non-Newtonian mechanics, paying particular attention to the rheometrical properties of non-Newtonian fluids as well as non-Newtonian flow in complex geometries. The role of non-Newtonian fluid mechanics is also considered. The discussion then turns to the basic equations governing non-Newtonian fluid mechanics, including Navier Stokes equations and rheological equations of state. The next chapter describes a flow classification in which the various flow problems are grouped under five main headings: flows dominated by shear viscosity, slow flows (slightly elastic liquids), small deformation flows, nearly-viscometric flows, and long-range memory effects in complex flows. The remainder of the book is devoted to numerical analysis of non-Newtonian fluids using finite difference and finite element techniques. This monograph will be of interest to students and practitioners of physics and mathematics.
Download or read book Non Newtonian Flow and Applied Rheology written by R. P. Chhabra and published by Elsevier. This book was released on 2011-04-08 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between the theoretical work of the rheologist, and the practical needs of those who have to design and operate the systems in which these materials are handled or processed. It is an established and important reference for senior level mechanical engineers, chemical and process engineers, as well as any engineer or scientist who needs to study or work with these fluids, including pharmaceutical engineers, mineral processing engineers, medical researchers, water and civil engineers. This new edition covers a considerably broader range of topics than its predecessor, including computational fluid dynamics modelling techniques, liquid/solid flows and applications to areas such as food processing, among others. * Written by two of the world's leading experts, this is the only dedicated non-Newtonian flow reference in print. * Since first publication significant advances have been made in almost all areas covered in this book, which are incorporated in the new edition, including developments in CFD and computational techniques, velocity profiles in pipes, liquid/solid flows and applications to food processing, and new heat/mass transfer methods and models. * Covers both basic rheology and the fluid mechanics of NN fluids ? a truly self-contained reference for anyone studying or working with the processing and handling of fluids
Download or read book Bubbles Drops and Particles in Non Newtonian Fluids written by Raj P. Chhabra and published by CRC Press. This book was released on 2023-08-31 with total page 733 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides thorough coverage of the scientific foundations and the latest advances in particle motion in non-Newtonian media. Proveds a new detailed section on the effect of confinement on heat transfer from bluff-bodies Demonstrates how dynamic behavior of single particles can yield useful information for modeling transport processes in complex multiphase flows. Addresses heat transfer in viscoplastic fluids throughout the entire book. Highlights qualitative differences between the response of a Newtonian and non-Newtonian fluids in the complex flows encountered in processing applications
Download or read book Rheology and Non Newtonian Fluids written by Fridtjov Irgens and published by Springer Science & Business Media. This book was released on 2013-07-25 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a brief but thorough introduction to the fascinating subject of non-Newtonian fluids, their behavior and mechanical properties. After a brief introduction of what characterizes non-Newtonian fluids in Chapter 1 some phenomena characteristic of non-Newtonian fluids are presented in Chapter 2. The basic equations in fluid mechanics are discussed in Chapter 3. Deformation kinematics, the kinematics of shear flows, viscometric flows, and extensional flows are the topics in Chapter 4. Material functions characterizing the behavior of fluids in special flows are defined in Chapter 5. Generalized Newtonian fluids are the most common types of non-Newtonian fluids and are the subject in Chapter 6. Some linearly viscoelastic fluid models are presented in Chapter 7. In Chapter 8 the concept of tensors is utilized and advanced fluid models are introduced. The book is concluded with a variety of 26 problems. Solutions to the problems are ready for instructors
Download or read book Bubbles Drops and Particles in Non Newtonian Fluids written by R.P. Chhabra and published by CRC Press. This book was released on 2006-07-25 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bubbles, Drops, and Particles in Non-Newtonian Fluids, Second Edition continues to provide thorough coverage of the scientific foundations and the latest advances in particle motion in non-Newtonian media. The book demonstrates how dynamic behavior of single particles can yield useful information for modeling transport processes in complex multipha
Download or read book Numerical Methods for Non Newtonian Fluids written by Philippe G. Ciarlet and published by Elsevier. This book was released on 1990 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Numerical Methods for Hyperbolic Problems explores the changes that have taken place in the past few decades regarding literature in the design, analysis and application of various numerical algorithms for solving hyperbolic equations. This volume provides concise summaries from experts in different types of algorithms, so that readers can find a variety of algorithms under different situations and readily understand their relative advantages and limitations.
Download or read book Numerical Methods for Non Newtonian Fluids written by and published by Elsevier. This book was released on 2010-12-20 with total page 826 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Newtonian flows and their numerical simulations have generated an abundant literature, as well as many publications and references to which can be found in this volume's articles. This abundance of publications can be explained by the fact that non-Newtonian fluids occur in many real life situations: the food industry, oil & gas industry, chemical, civil and mechanical engineering, the bio-Sciences, to name just a few. Mathematical and numerical analysis of non-Newtonian fluid flow models provide challenging problems to partial differential equations specialists and applied computational mathematicians alike. This volume offers investigations. Results and conclusions that will no doubt be useful to engineers and computational and applied mathematicians who are focused on various aspects of non-Newtonian Fluid Mechanics. - New review of well-known computational methods for the simulation viscoelastic and viscoplastic types - Discusses new numerical methods that have proven to be more efficient and more accurate than traditional methods - Articles that discuss the numerical simulation of particulate flow for viscoelastic fluids
Download or read book Unsteady Flow of Dilute Aqueous Polymer Solutions in Pipe Networks written by Henry C. Jackson and published by . This book was released on 1970 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Applied Polymer Processing Technology written by Nicholas P. Cheremisinoff and published by CRC Press. This book was released on 2020-10-07 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Offers detailed coverage of applied polymer processing--presenting a wide range of technologies and furnishing state-of-the-art data on polymer components, properties, and processibility. Reviews fundamental rheological concepts. Contains over 1600 bibliographic citations, some 450 equations, and over 400 tables, drawings, and photographs."
Download or read book Hydraulic Research in the United States 1968 written by United States. National Bureau of Standards and published by . This book was released on 1969 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1969 with total page 1090 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in the Flow of Complex Fluids in Tubes written by Dennis A. Siginer and published by Springer. This book was released on 2014-11-11 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the tube flow of viscoelastic fluids and Newtonian single and multi-phase particle-laden fluids. This succinct volume collects the most recent analytical developments and experimental findings, in particular in predicting the secondary field, highlighting the historical developments which led to the progress made. This book brings a fresh and unique perspective and covers and interprets efforts to model laminar flow of viscoelastic fluids in tubes and laminar and turbulent flow of single and multi-phase particle-laden flow of linear fluids in the light of the latest findings.
Download or read book Rheology of Drag Reducing Fluids written by Aroon Shenoy and published by Springer Nature. This book was released on 2020-03-25 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains theoretical derivations and presents expressions for fluid and convective turbulent flow of mildly elastic fluids in various internal and external flow situations involving different types of geometries, such as the smooth/rough circular pipes, annular ducts, curved tubes, vertical flat plates, and channels. Understanding the methodology of the analyses facilitates appreciation for the rationale used for deriving expressions of parameters relevant to the turbulent flow of mildly elastic fluids. This knowledge serves as a driving force for developing new ideas, investigating new situations, and extending theoretical analyses to other unexplored areas of the rheology of mildly elastic drag reducing fluids.The book suits a range of functions--it can be used to teach elective upper-level undergraduate or graduate courses for chemical engineers, material scientists, mechanical engineers, and polymer scientists; guide researchers unexposed to this alluring and interesting area of drag reduction; and serve as a reference to all who want to explore and expand the areas dealt with in this book.
Download or read book NBS Special Publication written by and published by . This book was released on 1968 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Influence of Polymer Additives on Velocity and Temperature Fields written by Bernhard Gampert and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium on "The Influence of Polymer Additives on Veloc ity and Temperature Fields" was proposed to the General Assem bly of the International Union of Theoretical and Applied Me chanics (IUTAM) by the "Gesellschaft fur Angewandte Mathematik und Mechanik" (GAMM). The Symposium was held under the auspices of IUTAM in association with the "Deutsche Rheologische Ge sellschaft" (DRG) with responsibility for the organization ly ing with B. Gampert (Universitat-GH-Essen). The main aim of this IUTAM Symposium was to consider the funda mental aspects of the phenomena that occur when small amounts of polymers are added to turbulent flows (turbulent drag re duction) and laminar porous media flows. In particular atten tion was devoted to - the influence of molecular parameters of the polymers and solution properties, especially the elongational viscosity, on turbulent flow and laminar porous media flow; the influence of polymers on the turbulence structure in polymer drag reduction
Download or read book Non Newtonian Flow written by R. P. Chhabra and published by Elsevier. This book was released on 1999-08-19 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Newtonian materials are encountered in virtually all of the chemical and process industries and a full understanding of their nature and flow characteristics is an essential requirement for engineers and scientists involved in their formulation and handling. This book will bridge the gap between much of the highly theoretical and mathematically complex work of the rheologist and the practical needs of those who have to design and operate plants in which these materials are handled and processed. At the same time, numerous references are included for the benefit of those who need to delve more deeply into the subject.The starting point for any work on non-newtonian fluids is their characterisation over the range of conditions to which they are likely to be subjected during manufacture or utilisation, and this topic is treated early on in the book in a chapter commissioned from an expert in the field of rheological measurements. Coverage of topics is extensive and this book offers a unique and rich selection of material including the flow of single phase and multiphase mixtures in pipes, in packed and fluidised bed systems, heat and mass transfer in boundary layers and in simple duct flows, and mixing etc.An important and novel feature of the book is the inclusion of a wide selection of worked examples to illustrate the methods of calculation. It also incorporates a large selection of problems for the reader to tackle himself.
