Download or read book Statistical Methods for Detection and Quantification of Environmental Contamination written by Robert D. Gibbons and published by John Wiley & Sons. This book was released on 2001-07-13 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kontaminationen so früh wie möglich erkennen und damit so früh wie möglich beseitigen: Statistische Methoden, die diesem Ziel dienen, werden hier vorgestellt. Die besprochenen Strategien zum Nachweis und zur Quantifizierung von Schadstoffen lassen sich auf alle Umweltkompartimente anwenden. Praktische Details werden anhand von Fallstudien anschaulich erläutert.
Download or read book Spectrochemical Analysis by Atomic Absorption and Emission written by L Lajunen and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes both the theory of atomic spectroscopy and all the major atomic spectrometric techniques (AAS, Flame-AES, Plasma AES, AFS, and ICP-MS), including basic concepts, instrumentation and applications. Spectrochemical Analysis by Atomic Absorption and Emission is very wide in scope and will be extremely useful to both undergraduates and lecturers undertaking modern analytical chemistry courses. It contains many figures and tables which illuminate the text, covers various sample preparation methods and gives suggestions for further reading.
Download or read book Compendium of Analytical Nomenclature written by H. M. N. H. Irving and published by Elsevier. This book was released on 2017-05-03 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compendium of Analytical Nomenclature: Definitive Rules 1977 focuses on the recommended nomenclature and symbols to be used in various disciplines of analytical chemistry. The book first offers information on recommendations for the presentation of the results of chemical analysis; recommendations for terminology to be employed with precision balances; and recommendations on nomenclature for contamination phenomena in precipitation from aqueous solution. The text also takes a look at recommended nomenclature for automatic analysis and recommendations for nomenclature of thermal analysis and mass spectrometry, as well as recommended nomenclature for titrimetric analysis. The publication reviews the practical measurements of pH in amphiprotic and mixed solvents. Topics include operational pH scale; selection of a pH unit for amphiprotic solvents; and interpretation of the measured pH. The text also considers the recommendations on nomenclature and presentation of data in gas chromatography and recommendations on nomenclature for chromatography. The book is a valuable source of data for readers wanting to study analytical nomenclature.
Download or read book Quantities Units and Symbols in Physical Chemistry written by Christopher M A Brett and published by Royal Society of Chemistry. This book was released on 2023-11-29 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first IUPAC Manual of Symbols and Terminology for Physicochemical Quantities and Units was published in 1969 with the objective of 'securing clarity and precision, and wider agreement in the use of symbols, by chemists in different countries, among physicists, chemists and engineers, and by editors of scientific journals'. Subsequent revisions have taken account of many developments in the field and were also substantially expanded and improved in presentation in several new editions of what is now widely known as the ‘Green Book of IUPAC’. This abridged version of the forthcoming 4th edition reflects the experience of the contributors and users of the previous editions. The book has been systematically brought up to date and provides a compilation of generally used terms and symbols with brief, understandable definitions and explanations. Tables of important fundamental constants and conversion factors are included. In this abridged guide, the more specialized and complex material has been omitted, retaining, however, the essence of the Green Book. It is particularly intended to be suitable for students and teachers but it should also be useful for scientists, science publishers and organizations working across a multitude of disciplines requiring internationally approved terminology in the area of Physical Chemistry. It now includes the most up to date definitions and constants in agreement with the ‘new SI’ as established by agreement on the International System of Units in Paris in 2019. It should find the widest possible acceptance and use for best practice in science and technology.
Download or read book Quantities Units and Symbols in Physical Chemistry written by International Union of Pure and Applied Chemistry. Physical and Biophysical Chemistry Division and published by Royal Society of Chemistry. This book was released on 2007 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the IUPAC Physical Chemistry Division this definitive manual, now in its third edition, is designed to improve the exchange of scientific information among the readers in different disciplines and across different nations. This book has been systematically brought up to date and new sections added to reflect the increasing volume of scientific literature and terminology and expressions being used. The Third Edition reflects the experience of the contributors with the previous editions and the comments and feedback have been integrated into this essential resource. This edition has been compiled in machine-readable form and will be available online.
Download or read book Introduction to Chemical Nomenclature written by R. S. Cahn and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Chemical Nomenclature: Fifth Edition delves into the nomenclature, the system of how names or terms are formed, of different compounds. The book covers the development of chemical nomenclature; the nomenclature of different ions, salts, and compounds under inorganic chemistry; the principles involved in the nomenclature of organic compounds including hydrocarbons and heterocycles; and special features and functional groups. The selection also covers natural products such as carbohydrates, lipids, steroids, amino acids and nucleic acids, alkaloids, and peptides, as well as the miscellaneous chemical nomenclature, which includes organometallic and isotopically modified compounds and polymers. The text is a good reference for students who have trouble in the nomenclature of different chemical substances and those who want to study the principles behind the chemical nomenclature.
Download or read book CRC Handbook of Basic Tables for Chemical Analysis written by Thomas J. Bruno and published by CRC Press. This book was released on 2010-12-13 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of an Oustanding Academic Title Award for 2011!Researchers in organic chemistry, chemical engineering, pharmaceutical science, forensics, and environmental science make routine use of chemical analysis, but the information these researchers need is often scattered in different sources and difficult to access. The CRC Handbook of Basic Tables
Download or read book Compendium of Terminology and Nomenclature of Properties in Clinical Laboratory Sciences written by Georges Férard and published by Royal Society of Chemistry. This book was released on 2016-11-11 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been significant expansion and development in clinical laboratory sciences and, in particular, metrological concepts, definitions and terms since the previous edition of this book was published in 1995. It is of prime importance to standardize laboratory reports for reliable exchange of patient examination data without loss of meaning or accuracy. New disciplines have appeared and the interrelationships between different disciplines within clinical laboratory sciences demand a common structure and language for data exchange, in the laboratory and with the clinicians, necessitating additional coverage in this book. These new sections will be based upon recommendations published by various national, regional, and international bodies especially IUPAC and IFCC. This book groups and updates the recommendations and will be appropriate for laboratory scientists, medical professionals and students in this area.
Download or read book Conversion Tables of Units in Science Engineering written by Ari L Horvath and published by Springer. This book was released on 1986-10-13 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Converting units from one type of usage to another is a constant and regular problem that engineers and scientists have to solve. This book will therefore be invaluable as it provides a complete coverage of all the conversion factors required. Covering areas such as mechanical units, thermal units, units of physical chemistry, units of light, units of electricity and magnetism and also radiation. References are given throughout and there is a comprehensive index.
Download or read book Review written by and published by . This book was released on 1974 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Lithium Therapy written by F.N. Johnson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a medical student in the 1930s, I remember well that a very clear line of distinction was drawn between physical illness and mental illness. Physical illness resulted from pathology which could be identified and studied in detail and the cause could often be deduced. Treatment thus was often specific and based upon a proper appreciation of underlying basic science. Mental illness, on the other hand, could not, it was believed, be based upon identifiable changes in basic science. It was literally 'all in the mind' and, occurring in the absence of causes that could be identified, analysed and remedied, had no treatment that could in any way be called specific. N ow it is all too easy, in Medicine, for a doctor to become so immersed in a specialty that he fails to notice how his colleagues in other specialties are faring and, through laziness, to miss advances even of fundamental importance in fields other than those in which he himself works. As a consultant surgeon, after W orId War II, although I realized the importance of keeping in touch with those medical specialties which appeared to have a common interface with my own surgical interests, such as general medi cine, gastro-enterology, hepatology and endocrinology, it did not occur to me that there was any pressing need to ask what was new in Psychological Medicine.
Download or read book Encyclopedia of Chromatography written by Jack Cazes and published by CRC Press. This book was released on 2009-10-12 with total page 2968 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly revised and expanded, this third edition offers illustrative tables and figures to clarify technical points in the articles and provides a valuable, reader-friendly reference for all those who employ chromatographic methods for analysis of complex mixtures of substances. An authoritative source of information, this introductory guide to specific chromatographic techniques and theory discusses the relevant science and technology, offering key references for analyzing specific chemicals and applications in industry and focusing on emerging technologies and uses.
Download or read book International Union of Pure and Applied Chemistry written by Sam Stuart and published by Elsevier. This book was released on 2013-10-22 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Union of Pure and Applied Chemistry: Nomenclature, Symbols, Units and their Usage in Spectrochemical Analysis—III: Analytical Flame Spectroscopy and Associated Non-Flame Procedures covers the analytical application of flame spectroscopy and related procedures, which is not encompassed in the first two parts of the series. Parts I and II of the series deal with general recommendations. Section 1 of this document presents a classification of the methods and instruments used in the different branches of analytical flame spectroscopy. Section 2 lists terms and symbols for common quantities and constants in analytical spectroscopy. The subsequent section discusses the terms, symbols, and units for the description of the analytical flame spectrometer and similar devices. Section 4 explains the general terms and symbols relating to the methods of flame spectroscopy. The final section deals with the terms, symbols and units relating to optical radiation. This document is valuable to practical analysts who are looking for well-defined terminologies and consistent set of symbols in the field of analytical flame spectroscopy.
Download or read book Solid Sample Analysis written by Ulrich Kurfürst and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis of solid materials by introducing solid test sampies directly into the graphite furnace of an atomic absorption spectrometer must be regarded as a powerful analytical approach. Even if it is - of course - not the "ultimate method". After three decades of development, the instrumentation and the methodology are available to apply solid sampling successfully for the analysis of almost every material. Moreover, several tasks cannot be solved using other analytical methods as neatly as they can using direct solid sampling. The conventional methods work more or less satisfactorily, so why do we sug gest applying solid sampling much more extensively than it is today? To begin with, the features pointed out time and again should be named: Rapidity of the analytical procedure, low susceptibility to analyte loss or contamination, very smallquantities can be analyzed, and expenditure on instrumentation and per sonell is also low. These properties are examined and the necessary conditions are discussed (Chapter 1) as are the analytical tasks (Chapter 6) for which use of this method is advantageous. Other features that are often overlooked are just as important: The simplicity of the analytical procedures allows the analyst to main tain an intimate relationship with the original scientific task that has to be solved with the analysis. Furthermore, the considerable reduction of working place haz ards and pollution by avoiding the use of chemical reagents must nowadays be assessed as a feature as important as the others.
Download or read book Report of NRL Progress written by Naval Research Laboratory (U.S.) and published by . This book was released on 1976 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemometrics and Numerical Methods in LIBS written by Vincenzo Palleschi and published by John Wiley & Sons. This book was released on 2022-10-06 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemometrics and Numerical Methods in LIBS A practical guide to the application of chemometric methods to solve qualitative and quantitative problems in LIBS analyses Chemometrics and Numerical Methods in LIBS, delivers an authoritative and practical exploration of the use of advanced chemometric methods to laser-induced breakdown spectroscopy (LIBS) cases. The book discusses the fundamentals of chemometrics before moving on to solutions that can be applied to data analysis methods. It is a concise guide designed to help readers at all levels of knowledge solve commonly encountered problems in the field. The book includes three sections: LIBS information simplification, LIBS classification, and quantitative analysis by LIBS. Each section of the book is divided into a description of relevant techniques and practical examples of its applications. Contributors to this edited volume are the most recognized international experts on the chemometric techniques relevant to LIBS analysis. Chemometrics and Numerical Methods in LIBS also includes: A thorough introduction to the simplification of LIBS information, including principal component analysis, independent component analysis, and parallel factor analysis Comprehensive explorations of classification by LIBS, including spectral angle mapping, linear discriminant analysis, graph clustering, self-organizing maps, and artifical neural networks Practical discussions of linear methods for quantitative analysis by LIBS, including calibration curves, partial least squares regression, and limit of detection In-depth examinations of multivariate analysis and non-linear methods, including calibration-free LIBS, the non-linear Kalman filter, artificial and convolutional neural networks for quantification Relevant for researchers and PhD students seeking practical information on the application of advanced statistical methods to the analysis of LIBS spectra, Chemometrics and Numerical Methods in LIBS will also earn a place in the libraries of students taking courses involving LIBS spectro-analytical techniques
Download or read book Analyses of Airborne Particulates and Human Urine by Inductively Coupled Plasma atomic Emission Spectrometry written by Kenneth W. Olson and published by . This book was released on 1978 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
