Download or read book Nickel and Its Alloys Classic Reprint written by United States Bureau Of Standards and published by Forgotten Books. This book was released on 2018-01-10 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Nickel and Its Alloys The bureau is continually in receipt of requests for information concerning the properties, statistics, and manufacture of metals and of alloys coming from other departments of the Government, technical or purchasing agents of manufacturing firms, or from persons engaged in special investigative work in universities and private technical institutes. Such information is rarely to be found in systematic form; usually the sources of such information are difficult of access, and their accuracy not always certain. Often quoted information of this sort is valueless, either for the reason that the data upon which it is based are actually incorrect or that they have not been properly interpreted. There are, therefore, being issued from time to time in response to these demands circulars on individual metals or alloys, with the idea of grouping in these circulars all of the best information which the bureau has as a result of its tests and investigations, together with that available in all records of published tests and investiga tions of such material. The circulars deal primarily with the physical properties of the metal or alloy. All other features, except a few statistics of pro duction and the methods of manufacture, presence of impurities, etc., are discussed only in their relation to these physical properties. It must be realized that the physical properties of metals and alloys are often in great degree dependent upon such factors, so that the statement of values for such properties should include information regarding these factors by which the properties are affected. The endeavor, therefore, in the circulars is to reproduce only such data as have passed critical scrutiny and to qualify suitably in the sense outlined above all statements, numerical or otherwise, made relative to the characteristics of the metal. The probable degree of accuracy of data is indicated or implied by the number of significant figures in the values given. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Nickel and Its Alloys written by Samuel Jacob Rosenberg and published by . This book was released on 1968 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel and Its Alloys written by Walter Betteridge and published by . This book was released on 1984 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alloys of Chromium Copper and Nickel Classic Reprint written by Oscar Edward Harder and published by Forgotten Books. This book was released on 2018-02-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Alloys of Chromium, Copper and Nickel In the work presented in this bulletin a preliminary survey has been made of the binary and ternary alloys and a somewhat systematic study made of their properties. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Strength of the Alloys of Nickel and Copper With Electrolytic Iron Classic Reprint written by Charles Frederick Burgess and published by Forgotten Books. This book was released on 2016-09-13 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Strength of the Alloys of Nickel and Copper With Electrolytic Iron Of the properties of binary alloys of iron with the common metals comparatively little is known. This is attributed to the fact that pure iron with which to alloy copper or nickel, or tin, or others of the metallic elements, has been a rare laboratory product, and interest has been directed, naturally, to alloys made from commercial materials. Based upon the discovery of a simple method of refining iron electrolytically, an extensive line of laboratory investigation was begun five years ago in the Applied Electrochemistry Lab oratory of the University of Wisconsin, and has been carried on almost without interruption since that time. This investiga tion has consisted in the production and study of the properties of alloys of iron, eliminating as far as possible the common im purities, sulphur, phosphorus, silicon, manganese and carbon. This work has been conducted through facilities afforded by the College of Engineering of the University of Wisconsin and through grants from the Carnegie Institution of Washington. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Analysis of Complex Alloys of the Nickel Copper Chromium Type written by Silas Alonzo Braley and published by Forgotten Books. This book was released on 2017-12-13 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Analysis of Complex Alloys of the Nickel, Copper, Chromium Type: Thesis The new alloy of the nickel, copper, chromium type as prepared by Professor 8. W; Parr of the University of Illinois. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Waterbury Book of Alloys written by Robert A. Wood and published by Forgotten Books. This book was released on 2017-11-29 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Waterbury Book of Alloys: Supplement The metal itself is extremely sensitive to chemical as well as mechanical conditions and unless care is exercised in every possible direction disappointment. In the final results is inevitable. In many instances, even when the greatest care is taken with the melting and pouring Operations, the result ing castings will be, found to be defective. These results in general may be charged to changes in atmospheric condi tions, as well as to some unintentional oversight in the melting or pouring operations. Only the best grade of metals should be used for the manufacture of nickel and its alloys which are to be used for rolling mill purposes. The copper used may be either lake or electrolytic but, in no instance should that grade of copper known as casting copper be employed. A tough, long-grained grade of spelter practically free from lead or other impurities will be found to give satisfactory results. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Analysis of Non Ferrous Alloys Classic Reprint written by Fred Ibbotson and published by Forgotten Books. This book was released on 2018-03 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Analysis of Non-Ferrous Alloys The first edition of this book was published just as the Great War commenced. The war did a great deal to encourage the accurate control of metals by means of chemical analysis, and the non -ferrous metals and alloys experienced this stimulus to a marked extent. In addition, the war brought to the front many and various alloys which previously had been either unknown or very little used. A notable example of this effect was the greatly extended of the light alloys of aluminium. Despite this dual develop ment in the field occupied by the non-ferrous alloys, it cannot be said that there was any concomitant development in the methods employed in their analysis. Some methods were brought forward, but the advance was not startling. The main duty, therefore, of the authors in presenting a new edition is to provide the best analytical methods for those new alloys that have been brought into prominence. They have therefore added to the book methods for the analysis of aluminium and its light alloys, and since the separation of aluminium and zinc presents the most difficult problem in the analysis of such alloys, they have dealt with this separation at some length in a separate chapter. Other alloys which now call for adequate treatment are mainly those of nickel. The principal alloys of this metal are those with copper and those with chromium and iron. Methods for the analysis of all these alloys have been included in this new edition. The other notable additions deal with the determination of the special elements, such as iron or manganese, that are added to the copper-zinc and copper tin alloys in order to give these alloys mechanical properties of special value. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Nickel and Its Alloys written by United States. National Bureau of Standards and published by . This book was released on 1920 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel and Its Alloys written by Mond Nickel Company Limited and published by . This book was released on 1927 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel and Its Alloys written by International Nickel Company and published by . This book was released on 1939 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel Steel a Synopsis of Experiment and Opinion Classic Reprint written by David Henry Browne and published by Forgotten Books. This book was released on 2017-09-12 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Nickel-Steel a Synopsis of Experiment and Opinion Of making alloys there is no end. We have heard much, during the last decade, of manganese-steel and chrome-steel. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Nickel and its Alloys Technical publications written by Mond Nickel Company. Research and Development Department and published by . This book was released on 1927 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Creep and Structural Stability of Nickel Chromium Iron Alloys at 1 600 F Classic Reprint written by W. A. Tucker and published by Forgotten Books. This book was released on 2017-03-10 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Creep and Structural Stability of Nickel-Chromium-Iron-Alloys at 1. 600° F The rate of diffusion and agglomeration was increased in all the alloys studied, excepting alloy 74, to such a degree that the stressed speci mens more closely approached an equilibrium condition than the unstressed specimens which had been annealed for several hundred hours longer than the duration of the creep test. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Alloys of Chromium Copper and Nickel written by Oscar Edward Harder and published by Forgotten Books. This book was released on 2017-10-27 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Alloys of Chromium, Copper and Nickel: Thesis Submitted in Partial Fulfillment of the Requirements for the Degree of Doctor of Philosophy in Chemistry in the Graduate School of the University of Illinois, 1915 Christofle and Bouilhet. Bull. Soc. Chem., XXVI (1876) p. 419. Compt. Rend. LXXXIII., (1876) p. 29. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Properties of Pure Nickel Classic Reprint written by Louis Jordan and published by Forgotten Books. This book was released on 2017-10-28 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from The Properties of Pure Nickel The physical properties of nicl'el of a purity of or t summarized in Table 12. This metal was electrolytic iiickilnfugciii. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book Thermal Expansion of Heat Resisting Alloys written by Peter Hidnert and published by Forgotten Books. This book was released on 2018-01-14 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Thermal Expansion of Heat-Resisting Alloys: Nickel-Chromium, Iron-Chromium, and Nickel-Chromium-Iron Alloys In the present investigation six samples of iron-chromium alloys containing from to per cent chromium were used. The chemical composition, heat treatment, and other information about these samples have been given in Table 1. Figures 5 to 9, inclusive, show the observations obtained.' Slight transformations were located on all samples except samples 1299 and 1294. The arrows in Figures 6 to 8 indicate the, beginning of the' About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
