Download or read book Index of Specifications and Standards written by and published by . This book was released on with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Analysis and Design of Process Equipment written by Maan H. Jawad and published by John Wiley & Sons. This book was released on 2018-06-22 with total page 1105 pages. Available in PDF, EPUB and Kindle. Book excerpt: Still the only book offering comprehensive coverage of the analysis and design of both API equipment and ASME pressure vessels This edition of the classic guide to the analysis and design of process equipment has been thoroughly updated to reflect current practices as well as the latest ASME Codes and API standards. In addition to covering the code requirements governing the design of process equipment, the book supplies structural, mechanical, and chemical engineers with expert guidance to the analysis and design of storage tanks, pressure vessels, boilers, heat exchangers, and related process equipment and its associated external and internal components. The use of process equipment, such as storage tanks, pressure vessels, and heat exchangers has expanded considerably over the last few decades in both the petroleum and chemical industries. The extremely high pressures and temperatures involved with the processes for which the equipment is designed makes it potentially very dangerous to property and life if the equipment is not designed and manufactured to an exacting standard. Accordingly, codes and standards such as the ASME and API were written to assure safety. Still the only guide covering the design of both API equipment and ASME pressure vessels, Structural Analysis and Design of Process Equipment, 3rd Edition: Covers the design of rectangular vessels with various side thicknesses and updated equations for the design of heat exchangers Now includes numerical vibration analysis needed for earthquake evaluation Relates the requirements of the ASME codes to international standards Describes, in detail, the background and assumptions made in deriving many design equations underpinning the ASME and API standards Includes methods for designing components that are not covered in either the API or ASME, including ring girders, leg supports, and internal components Contains procedures for calculating thermal stresses and discontinuity analysis of various components Structural Analysis and Design of Process Equipment, 3rd Edition is an indispensable tool-of-the-trade for mechanical engineers and chemical engineers working in the petroleum and chemical industries, manufacturing, as well as plant engineers in need of a reference for process equipment in power plants, petrochemical facilities, and nuclear facilities.
Download or read book Corrosion Control written by S. Bradford and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human beings undoubtedly became aware of corrosion just after they made their first metals. These people probably began to control corrosion very so on after that by trying to keep metal away from corrosive environments. "Bring your tools in out of the rain" and "Clean the blood off your sword right after battle" would have been early maxims. Now that the mechanisms of corrosion are better understood, more techniques have been developed to control it. My corrosion experience extends over 10 years in industry and research and over 20 years teaching corrosion courses to university engineering students and industrial consulting. During that time I have developed an approach to corrosion that has successfully trained over 1500 engineers. This book treats corrosion and high-temperature oxidation separately. Corrosion is divided into three groups: (1) chemical dissolution including uniform attack, (2) electrochemical corrosion from either metallurgicalor environmental cells, and (3) corrosive-mechanical interactions. It seems more logical to group corrosion according to mechanisms than to arbitrarily separate them into 8 or 20 different types of corrosion as if they were unrelated. University students and industry personnel alike generally are afraid of chemistry and consequently approach corrosion theory very hesitantly. In this text the electrochemical reactions responsible for corrosion are summed up in only five simple half-cell reactions. When these are combined on a polarization diagram, which is explained in detail, the electrochemical pro cesses become obvious.
Download or read book Nickel Alloys written by Ulrich Heubner and published by CRC Press. This book was released on 2000-09-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book evaluates the latest developments in nickel alloys and high-alloy special stainless steels by material number, price, wear rate in corrosive media, mechanical and metallurgical characteristics, weldability, and resistance to pitting and crevice corrosion. Nickel Alloys is at the forefront in the search for the most economic solutions to c
Download or read book Austenitic Steels at Low Temperatures written by T. Horiuchi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need for alternate energy sources has led to the develop ment of prototype fusion and MHD reactors. Both possible energy systems in current designs usually require the use of magnetic fields for plasma confinement and concentration. For the creation and maintenance of large 5 to 15 tesla magnetic fields, supercon ducting magnets appear more economical. But the high magnetic fields create large forces, and the complexities of the conceptual reactors create severe space restrictions. The combination of re quirements, plus the desire to keep construction costs at a mini mum, has created a need for stronger structural alloys for service at liquid helium temperature (4 K). The complexity of the required structures requires that these alloys be weldable. Furthermore, since the plasma is influenced by magnetic fields and since magnet ic forces from the use of ferromagnetic materials in many configur ations may be additive, the best structural alloy for most applica tions should be nonmagnetic. These requirements have led to consideration of higher strength austenitic steels. Strength increases at low temperatures are achieved by the addition of nitrogen. The stability of the austenitic structure is retained by adding manganese instead of nickel, which is more expensive. Research to develop these higher strength austenitic steels is in process, primarily in Japan and the United States.
Download or read book Handbook of Corrosion Engineering written by Pierre Roberge and published by McGraw-Hill Prof Med/Tech. This book was released on 1999-09-30 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reduce the enormous economic and environmental impact of corrosion Emphasizing quantitative techniques, this guide provides you with: *Theory essential for understanding aqueous, atmospheric, and high temperature corrosion processes Corrosion resistance data for various materials Management techniques for dealing with corrosion control, including life prediction and cost analysis, information systems, and knowledge re-use Techniques for the detection, analysis, and prevention of corrosion damage, including protective coatings and cathodic protection More
Download or read book Mechanical Design of Heat Exchangers written by Krishna P. Singh and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: A tubular heat exchanger exemplifies many aspects of the challenge in designing a pressure vessel. High or very low operating pressures and temperatures, combined with sharp temperature gradients, and large differences in the stiffnesses of adjoining parts, are amongst the legion of conditions that behoove the attention of the heat exchanger designer. Pitfalls in mechanical design may lead to a variety of operational problems, such as tube-to-tubesheet joint failure, flanged joint leakage, weld cracks, tube buckling, and flow induced vibration. Internal failures, such as pass partition bowing or weld rip-out, pass partition gasket rib blow-out, and impingement actuated tube end erosion are no less menacing. Designing to avoid such operational perils requires a thorough grounding in several disciplines of mechanics, and a broad understanding of the inter relationship between the thermal and mechanical performance of heat exchangers. Yet, while there are a number of excellent books on heat ex changer thermal design, comparable effort in mechanical design has been non-existent. This apparent void has been filled by an assortment of national codes and industry standards, notably the "ASME Boiler and Pressure Vessel Code" and the "Standards of Tubular Exchanger Manufacturers Association. " These documents, in conjunction with scattered publications, form the motley compendia of the heat exchanger designer's reference source. The subject matter clearly beckons a methodical and comprehensive treatment. This book is directed towards meeting this need.
Download or read book Alloying Elements in Steel written by Edgar Collins Bain and published by . This book was released on 1966 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Impact and Explosion written by M. Y. H. Bangash and published by Blackwell. This book was released on 1993-07-15 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Impact and Explosion: Structural Analysis and Design presents a comprehensive study of the structural dynamics of impact and explosion by providing a survey of types of aircraft, missiles, bombs, and detonators. Impact dynamics, including empirical models developed for different materials, water surfaces, and soil/rock mediums, is discussed. Other topics include load time history; explosion dynamics related to material damage capabilities; dynamic finite elements with provisions for impact and explosions; a discussion of solution procedures, acceleration, and convergence criteria; methods for designing structures resistant to impact and explosions; and how damage results due to impact or explosions. Case histories, comparative studies, numerous examples, appendices, and extensive references reinforce information presented in this important book for engineers and researchers working in government and private industry laboratories concerned with blast or impact loading effects on structures. Small firms that deal with impact loading (e.g., automobile collisions) will also find this book valuable.
Download or read book Phase Stability in Metals and Alloys written by Battelle Memorial Institute and published by . This book was released on 1967 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel Alloy Corrosion and Heat Resistant Bars Forgings and Rings 72Ni 15 5Cr 7 0Fe 2 5Ti 1 0Cb Nb 0 70Al 2100 F 1149 C Solution and Precipitation Heat Treated written by AMS F Corrosion and Heat Resistant Alloys Committee and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading. AMS5668J has been reaffirmed to comply with the SAE five-year review policy.
Download or read book The Phosphating of Metals written by Werner Rausch and published by Finishing Publications Limited & ASM International. This book was released on 1990 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nickel Alloy Corrosion and Heat Resistant Bars Forgings and Rings 72Ni 15 5Cr 7 0Fe 2 5Ti 1 0 Cb Ta 0 70Al 2100 F 1149 C Solution and Precipitation Heat Treated written by AMS F Corrosion and Heat Resistant Alloys Committee and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading.
Download or read book New Developments in Stainless Steel Technology written by R. A. Lula and published by Asm International. This book was released on 1985-01-01 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ALLOY BARS FORGINGS AND RINGS CORROSION AND HEAT RESISTANT 72Ni 15 5Cr 7 0Fe 2 5Ti 1 0 Cb Ta 0 70Al 2100 F 1095 C Solution and Precipitation Heat Treated written by AMS F Corrosion and Heat Resistant Alloys Committee and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging, flash welded rings, or heading.
