Download or read book Next Generation of Bridge Columns for Accelerated Bridge Construction in High Seismic Zones written by Mostafa Tazarv and published by . This book was released on 2014 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: Longitudinal bar debonding allowed spread of yielding and prevented premature failure of reinforcements in UHPC-filled duct connections and grouted coupler column pedestal. The SMA-reinforced ECC column showed superior seismic performance compared to a conventional column in which the plastic hinge damage was limited to only ECC cover spalling even under 12% drift ratio cycles. The column residual displacements were 79% lower than CIP residual displacements on average due to the superelastic NiTi SMA longitudinal reinforcement, and higher base shear capacity and higher displacement capacity were observed. The analytical modeling methods were simple and sufficiently accurate for general design and analyses of precast components proposed in the present study. The proposed symmetrical material model for reinforcing NiTi superelastic SMA was found to be a viable alternative to the more complex asymmetrical model.
Download or read book Bridge Safety Maintenance Management Life Cycle Resilience and Sustainability written by Joan Ramon Casas and published by CRC Press. This book was released on 2022-06-27 with total page 2646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Safety, Maintenance, Management, Life-Cycle, Resilience and Sustainability contains lectures and papers presented at the Eleventh International Conference on Bridge Maintenance, Safety and Management (IABMAS 2022, Barcelona, Spain, 11–15 July, 2022). This e-book contains the full papers of 322 contributions presented at IABMAS 2022, including the T.Y. Lin Lecture, 4 Keynote Lectures, and 317 technical papers from 36 countries all around the world. The contributions deal with the state-of-the-art as well as emerging concepts and innovative applications related to the main aspects of safety, maintenance, management, life-cycle, resilience, sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle, resilience, sustainability, standardization, analytical models, bridge management systems, service life prediction, structural health monitoring, non-destructive testing and field testing, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, needs of bridge owners, whole life costing and investment for the future, financial planning and application of information and computer technology, big data analysis and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on bridge safety, maintenance, management, life-cycle, resilience and sustainability of bridges for the purpose of enhancing the welfare of society. The volume serves as a valuable reference to all concerned with and/or involved in bridge structure and infrastructure systems, including students, researchers and practitioners from all areas of bridge engineering.
Download or read book Modern Techniques in Bridge Engineering written by Khaled Mahmoud and published by CRC Press. This book was released on 2011-08-26 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to significant economic growth in the last few decades, increasing traffic loads impose tremendous demand on bridge structures. This, coupled with ongoing deterioration of bridges, introduces a unique challenge to bridge engineers in maintaining service of these infrastructure assets without disruption to vital economic and social activities. This requires innovative solutions and optimized methodologies to achieve safe and efficient operation of bridge structures. Bridge engineering practitioners, researchers, owners, and contractors from all over the world presented on modern techniques in design, inspection, monitoring and rehabilitation of bridge structures, at the Sixth New York City Bridge Conference held New York City on July 25-26, 2011. This book contains a select number of papers presented at the conference. This group of papers provides a state-of-the-art in bridge engineering and is of interest to any reader in the field.
Download or read book Sustainable Materials in Civil Infrastructure written by Thainswemong Choudhury and published by Elsevier. This book was released on 2024-06-26 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Materials in Civil Infrastructure covers the latest breakthroughs in innovative eco-materials and poses solutions for resilient and sustainable infrastructure. The book provides valuable insights into innovative research studies on eco-materials used for construction applications, which will provide researchers with a useful reference guide on recycled steel, low-carbon concrete, bio-concrete, self-healing concrete, and industrial by-products such as fly ash, natural geosynthetic fibres, and shape memory alloys for infrastructure development. The chapters cover design applications of bio-concrete, and usage of eco-materials in landfill liners and masonry. The book clearly identifies the issues that remain as obstacles for the large-scale use of green concrete, and bio-concrete and provides practical solutions to overcome them. The chapters create a knowledge base for the development of sustainable design methodologies that are widely accepted among various environmental monitoring/controlling bodies throughout the world. - Cutting-edge design methodologies incorporating machine learning and artificial intelligence - Coverage of biogeotechnics, landfill, and waste-to-energy techniques - Focus on emerging trends in eco-efficient concrete solutions
Download or read book Concrete Construction Engineering Handbook written by Edward G. Nawy and published by CRC Press. This book was released on 2008-06-24 with total page 1586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Concrete Construction Engineering Handbook, Second Edition provides in depth coverage of concrete construction engineering and technology. It features state-of-the-art discussions on what design engineers and constructors need to know about concrete, focusing on - The latest advances in engineered concrete materials Reinforced concrete construction Specialized construction techniques Design recommendations for high performance With the newly revised edition of this essential handbook, designers, constructors, educators, and field personnel will learn how to produce the best and most durably engineered constructed facilities.
Download or read book Maintenance Monitoring Safety Risk and Resilience of Bridges and Bridge Networks written by Tulio Nogueira Bittencourt and published by CRC Press. This book was released on 2016-11-17 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Monitoring, Safety, Risk and Resilience of Bridges and Bridge Networks contains the lectures and papers presented at the Eighth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2016), held in Foz do Iguaçu, Paraná, Brazil, 26-30 June, 2016. This volume consists of a book of extended abstracts and a DVD containing the full papers of 369 contributions presented at IABMAS 2016, including the T.Y. Lin Lecture, eight Keynote Lectures, and 360 technical papers from 38 countries. The contributions deal with the state-of-the-art as well as emerging concepts and innovative applications related to all main aspects of bridge maintenance, safety, management, resilience and sustainability. Major topics covered include: advanced materials, ageing of bridges, assessment and evaluation, bridge codes, bridge diagnostics, bridge management systems, composites, damage identification, design for durability, deterioration modeling, earthquake and accidental loadings, emerging technologies, fatigue, field testing, financial planning, health monitoring, high performance materials, inspection, life-cycle performance and cost, load models, maintenance strategies, non-destructive testing, optimization strategies, prediction of future traffic demands, rehabilitation, reliability and risk management, repair, replacement, residual service life, resilience, robustness, safety and serviceability, service life prediction, strengthening, structural integrity, and sustainability. This volume provides both an up-to-date overview of the field of bridge engineering as well as significant contributions to the process of making more rational decisions concerning bridge maintenance, safety, serviceability, resilience, sustainability, monitoring, risk-based management, and life-cycle performance using traditional and emerging technologies for the purpose of enhancing the welfare of society. It will serve as a valuable reference to all involved with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.
Download or read book Accelerated Bridge Construction written by Mohiuddin Ali Khan and published by Elsevier. This book was released on 2014-08-12 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: The traveling public has no patience for prolonged, high cost construction projects. This puts highway construction contractors under intense pressure to minimize traffic disruptions and construction cost. Actively promoted by the Federal Highway Administration, there are hundreds of accelerated bridge construction (ABC) construction programs in the United States, Europe and Japan. Accelerated Bridge Construction: Best Practices and Techniques provides a wide range of construction techniques, processes and technologies designed to maximize bridge construction or reconstruction operations while minimizing project delays and community disruption. - Describes design methods for accelerated bridge substructure construction; reducing foundation construction time and methods by using pile bents - Explains applications to steel bridges, temporary bridges in place of detours using quick erection and demolition - Covers design-build systems' boon to ABC; development of software; use of fiber reinforced polymer (FRP) - Includes applications to glulam and sawn lumber bridges, precast concrete bridges, precast joints details; use of lightweight aggregate concrete, aluminum and high-performance steel
Download or read book Innovation Communication and Engineering written by Teen-Hang Meen and published by CRC Press. This book was released on 2013-10-08 with total page 2334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the proceedings of the 2013 International Conference on Innovation, Communication and Engineering (ICICE 2013). This conference was organized by the China University of Petroleum (Huadong/East China) and the Taiwanese Institute of Knowledge Innovation, and was held in Qingdao, Shandong, P.R. China, October 26 - November 1, 2013. The conference received 653 submitted papers from 10 countries, of which 214 papers were selected by the committees to be presented at ICICE 2013. The conference provided a unified communication platform for researchers in a wide range of fields from information technology, communication science, and applied mathematics, to computer science, advanced material science, design and engineering. This volume enables interdisciplinary collaboration between science and engineering technologists in academia and industry as well as networking internationally. Consists of a book of abstracts (260 pp.) and a USB flash card with full papers (912 pp.).
Download or read book Rapid Visual Screening of Buildings for Potential Seismic Hazards Supporting Documentation written by and published by Government Printing Office. This book was released on 2015 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Rapid Visual Screening (RVS) handbook can be used by trained personnel to identify, inventory, and screen buildings that are potentially seismically vulnerable. The RVS procedure comprises a method and several forms that help users to quickly identify, inventory, and score buildings according to their risk of collapse if hit by major earthquakes. The RVS handbook describes how to identify the structural type and key weakness characteristics, how to complete the screening forms, and how to manage a successful RVS program.
Download or read book Bridge Deck Behaviour written by E C Hambly and published by CRC Press. This book was released on 1991-07-25 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the underlying behaviour of steel and concrete bridge decks. It shows how complex structures can be analysed with physical reasoning and relatively simple computer models and without complicated mathematics.
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2019-09-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1999: The Bridge Engineering Handbook is a unique, comprehensive, and state-of-the-art reference work and resource book covering the major areas of bridge engineering with the theme "bridge to the 21st century."
Download or read book National Earthquake Resilience written by National Research Council and published by National Academies Press. This book was released on 2011-09-09 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: The United States will certainly be subject to damaging earthquakes in the future. Some of these earthquakes will occur in highly populated and vulnerable areas. Coping with moderate earthquakes is not a reliable indicator of preparedness for a major earthquake in a populated area. The recent, disastrous, magnitude-9 earthquake that struck northern Japan demonstrates the threat that earthquakes pose. Moreover, the cascading nature of impacts-the earthquake causing a tsunami, cutting electrical power supplies, and stopping the pumps needed to cool nuclear reactors-demonstrates the potential complexity of an earthquake disaster. Such compound disasters can strike any earthquake-prone populated area. National Earthquake Resilience presents a roadmap for increasing our national resilience to earthquakes. The National Earthquake Hazards Reduction Program (NEHRP) is the multi-agency program mandated by Congress to undertake activities to reduce the effects of future earthquakes in the United States. The National Institute of Standards and Technology (NIST)-the lead NEHRP agency-commissioned the National Research Council (NRC) to develop a roadmap for earthquake hazard and risk reduction in the United States that would be based on the goals and objectives for achieving national earthquake resilience described in the 2008 NEHRP Strategic Plan. National Earthquake Resilience does this by assessing the activities and costs that would be required for the nation to achieve earthquake resilience in 20 years. National Earthquake Resilience interprets resilience broadly to incorporate engineering/science (physical), social/economic (behavioral), and institutional (governing) dimensions. Resilience encompasses both pre-disaster preparedness activities and post-disaster response. In combination, these will enhance the robustness of communities in all earthquake-vulnerable regions of our nation so that they can function adequately following damaging earthquakes. While National Earthquake Resilience is written primarily for the NEHRP, it also speaks to a broader audience of policy makers, earth scientists, and emergency managers.
Download or read book Between Two Earthquakes written by Sir Bernard M. Feilden and published by Getty Publications. This book was released on 1987-10-01 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook addresses three areas of concern for the museum administrator concerning the protection of historic buildings, monuments, and archaeological sites located in seismic areas. It proposes pre-disaster measures such as taking accurate and complete documentation (photogrammetry is discussed in one of the 13 appendixes), risk awareness, planning, maintenance and inspections, etc. Second, when an earthquake strikes, the immediate emergency steps necessary to protect life and property are indicated; and after the earthquake, the strengthening of valuable cultural property (based on the Modified Mercalli Intensity Scale, also in an appendix) should be included in the general program of prevention maintenance along with the repairs discussed in detail applicable to each architectural element, and to the site as a whole.
Download or read book Seismic Design of Reinforced Concrete and Masonry Buildings written by Thomas Paulay and published by Wiley-Interscience. This book was released on 1992-04-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes actual structural design, not analysis, of multistory buildings for seismic resistance. Strong emphasis is placed on specific detailing requirements for construction. Fundamental design principles are presented to create buildings that respond to a wide range of potential seismic forces, which are illustrated by numerous detailed examples. The discussion includes the design of reinforced concrete ductile frames, structural walls, dual systems, reinforced masonry structures, buildings with restricted ductility and foundation walls. In addition to the examples, full design calculations are given for three prototype structures.
Download or read book NCHRP Report 681 written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety Reliability and Risk of Structures Infrastructures and Engineering Systems written by Hitoshi Furuta and published by CRC Press. This book was released on 2009-09-01 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing the papers of the 10th International Conference on Structural Safety and Reliability (ICOSSAR2009, Osaka, Japan), this work covers safety and reliability of structures and systems in civil, marine, mechanical, transportation, and aerospace systems. A special focus is placed on advanced technologies, analytical and computational risk analysis, probability-based design and regulations, smart systems and materials, life cycle cost analysis, damage assessment, social aspects, and commercial applications. Emerging concepts and novel applications of reliability principles in all types of structural systems and mechanical components are included. In addition to the text, all of the papers are included on a fully searchable CD-ROM.
Download or read book Designing for Earthquakes written by Federal Emergency Management Agency and published by www.Militarybookshop.CompanyUK. This book was released on 2006-12 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This full color manual is intended to explain the principles of seismic design for those without a technical background in engineering and seismology. The primary intended audience is that of architects, and includes practicing architects, architectural students and faculty in architectural schools who teach structures and seismic design. For this reason the text and graphics are focused on those aspects of seismic design that are important for the architect to know.
