Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Manufacturing Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2023-08-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition textbook provides comprehensive knowledge and insight into various aspects of manufacturing technology, processes, materials, tooling, and equipment. Its main objective is to introduce the grand spectrum of manufacturing technology to individuals who will be involved in the design and manufacturing of finished products and to provide them with basic information on manufacturing technologies. Manufacturing Technology: Materials, Processes, and Equipment, Second Edition, is written in a descriptive manner, where the emphasis is on the fundamentals of the process, its capabilities, typical applications, advantages, and limitations. Mathematical modeling and equations are used only when they enhance the basic understanding of the material dealt with. The book is a fundamental textbook that covers all the manufacturing processes, materials, and equipment used to convert the raw materials to a final product. It presents the materials used in manufacturing processes and covers the heat treatment processes, smelting of metals, and other technological processes such as casting, forming, powder metallurgy, joining processes, and surface technology. Manufacturing processes for polymers, ceramics, and composites are also covered. The book also covers surface technology, fundamentals of traditional and nontraditional machining processes, numerical control of machine tools, industrial robots and hexapods, additive manufacturing, and industry 4.0 technologies. The book is written specifically for undergraduates in industrial, manufacturing, mechanical, and materials engineering disciplines of the second to fourth levels to cover complete courses of manufacturing technology taught in engineering colleges and institutions all over the world. It also covers the needs of production and manufacturing engineers and technologists participating in related industries where it is expected to be part of their professional library. Additionally, the book can be used by students in other disciplines concerned with design and manufacturing, such as automotive and aerospace engineering.

Download or read book Modern Manufacturing Technology written by Jitendra Kumar Katiyar and published by CRC Press. This book was released on 2021-12-03 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Manufacturing Technology: Spotlight on Future summarizes the emergence and development of modern manufacturing techniques (MMTs) with a focus on metallic and advanced material-based additive manufacturing technologies and their potential applications. Further, it explores advanced machining techniques for production of novel nanomaterials. The book also covers modern sophisticated techniques for the fabrication of ultrafine electronic devices such as micro-electromechanical systems (MEMS), nano-electromechanical systems (NEMS), semiconductors, and optical systems. A dedicated chapter on manufacturing technology for Industry 4.0 is included. Features: Describes the background of manufacturing techniques in brief including the advent of and introduction to MMTs Reviews various types of MMTs established in recent years and their accelerated growth and development innovation-driven applications Overviews the physical and chemical techniques used for nanomaterials production Explores the fabrication mechanisms of MEMS, NEMS, semiconductors and optical devices Provides a conceptual overview of additive manufacturing technologies This book is geared to undergraduate and postgraduate students and professionals in mechanical and manufacturing engineering, and the manufacturing industry.

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered

Download or read book Advances in Manufacturing Technology written by Rupinder Singh and published by CRC Press. This book was released on 2022-03-11 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This cross-disciplinary book transcends departmental, institutional, industrial, public, and research organizations and goes beyond global barriers to cover the integration of research, education, and manufacturing in advanced materials processing and characterization, including CAD-CAM, Finite Element Analysis (FEA), and smart manufacturing. Advances in Manufacturing Technology: Computational Materials Processing and Characterization focuses on the design of experiment-based computational models, which involves FEA along with an ergonomics-based design of tooling for both conventional and nonconventional manufacturing processes. It discusses research, work, and recent developments in the field of production manufacturing of any mechanical system. Case studies and solved numerical solutions are included at the end of each chapter for easy reading comprehension. The book is helpful to those working on new developments in the field of product manufacturing. It also acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing development plans.

Download or read book Advances in Manufacturing Technology XXXIV written by M. Shafik and published by IOS Press. This book was released on 2021-09-23 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of technologies and management of operations is key to sustaining the success of manufacturing businesses, and since the late 1970s, the International Conference on Manufacturing Research (ICMR) has been a major annual event for academics and industrialists engaged in manufacturing research. The conference is renowned as a friendly and inclusive platform that brings together a broad community of researchers who share a common goal. This book presents the proceedings of ICMR2021, the 18th International Conference on Manufacturing Research, incorporating the 35th National Conference on Manufacturing Research, and held in Derby, UK, from 7 to 10 September 2021. The theme of the ICMR2021 conference is digital manufacturing. Within the context of Industrial 4.0, ICMR2021 provided a platform for researchers, academics and industrialists to share their vision, knowledge and experience, and to discuss emerging trends and new challenges in the field. The 60 papers included in the book are divided into 10 parts, each covering a different area of manufacturing research. These are: digital manufacturing, smart manufacturing; additive manufacturing; robotics and industrial automation; composite manufacturing; machining processes; product design and development; information and knowledge management; lean and quality management; and decision support and production optimization. The book will be of interest to all those involved in developing and managing new techniques in manufacturing industry.

Download or read book Technology Usage in U S Manufacturing Industries written by Timothy Dunne and published by . This book was released on 1991 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Smart Digital Manufacturing written by Rene Wolf and published by John Wiley & Sons. This book was released on 2020-10-02 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world progresses toward Industry 4.0, and manufacturers are challenged to successfully navigate this unique digital journey. To some, digitalization is a golden opportunity; to others, it is a necessary evil. But to optimist and pessimist alike, there is a widespread puzzlement over the practical details of digitalization. To many manufacturers, digital transformation is a vague and confusing concept they nevertheless must grapple with in order to survive the Fourth Industrial Revolution. The proliferation of digital manufacturing technologies adds to the confusion, leaving many manufacturers perplexed and unprepared, with little real insight into how emerging technologies can help them sustain a competitive edge in their markets. This book effectively conveys Siemens's knowledge and experience through a concept called "Smart Digital Manufacturing," a stepwise approach to realizing the promise of the Fourth Industrial Revolution. The Smart Digital Manufacturing roadmap provides guidance and enables low-risk, high-reward adoption of new manufacturing software technologies through a series of tipping-point investment decisions that result in optimized manufacturing performance. The book provides readers with a clear understanding of what digital technology has to offer them, and how and when to invest in these essential components of tomorrow?s factories. René Wolf is Senior Vice President of Manufacturing Operations Management Software for Siemens Digital Industries Software, a business unit of the Siemens Digital Factory Division. Raffaello Lepratti is Vice President of Business Development and Marketing for Siemens Digital Industries Software.

Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.

Download or read book Manufacturing Technology Transfer written by Yasuo Yamane and published by CRC Press. This book was released on 2013-03-13 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a bestselling book originally published in Japanese, Manufacturing Technology Transfer: A Japanese Monozukuri View of Needs and Strategies offers time-tested methods and little-known tips for achieving successful transfer of technology along with the skills required to operate that technology. Designed to support a series of lectures on technology transfer within a master’s course on the management of technology, it presents the results of years of research carried out at Hiroshima University. The book delves into the authors’ decades of experience transferring technology between Japan and the rest of the world, particularly to developing countries from where much of the world’s future economic growth is expected. It contains case studies of successful technology transfers from both the ship building and food equipment industries. Its wide-reaching coverage examines methods of skill transfer, production management, and manufacturing company classification. Introducing readers to the engineering activities that occur within the manufacturing industry, the book illustrates the engineering technology activities involved in manufacturing, along with the production management activities required to support them. It also explains how job simulators can help shorten learning times in the manufacturing industry in the same way that flight simulators are used to teach flying skills to pilots. The book outlines a framework for teaching and learning processes that can be visualized in terms of an S-shaped learning curve. It explains how technology transfer overseas should be supported by contractual agreements between the parties concerned. Detailing the legal/contractual responsibilities for all parties involved, it also describes what you should do if problems arise during the transfer. Integrating previously unpublished research results with illustrative case studies, this book is suitable for a wide audience within the manufacturing industry—including manufacturing engineering students in both developed and developing countries, those responsible for the development of manufacturing engineers in industry and elsewhere, and anyone interested in the international activities of Japanese manufacturing companies.

Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.

Download or read book Trouble in the Making written by Mary Hallward-Driemeier and published by World Bank Publications. This book was released on 2017-10-12 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology and globalization are threatening manufacturing’s traditional ability to deliver both productivity and jobs at a large scale for unskilled workers. Concerns about widening inequality within and across countries are raising questions about whether interventions are needed and how effective they could be. Trouble in the Making? The Future of Manufacturing-Led Development addresses three questions: - How has the global manufacturing landscape changed and why does this matter for development opportunities? - How are emerging trends in technology and globalization likely to shape the feasibility and desirability of manufacturing-led development in the future? - If low wages are going to be less important in defining competitiveness, how can less industrialized countries make the most of new opportunities that shifting technologies and globalization patterns may bring? The book examines the impacts of new technologies (i.e., the Internet of Things, 3-D printing, and advanced robotics), rising international competition, and increased servicification on manufacturing productivity and employment. The aim is to inform policy choices for countries currently producing and for those seeking to enter new manufacturing markets. Increased polarization is a risk, but the book analyzes ways to go beyond focusing on potential disruptions to position workers, firms, and locations for new opportunities. www.worldbank.org/futureofmanufacturing

Download or read book Information Technology for Manufacturing written by Kevin Ake and published by CRC Press. This book was released on 2003-11-24 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rate of change in manufacturing today is faster than ever. Retailers and consumers demand flexibility and responsiveness, regulatory oversight is on the rise, and increasing consolidations require companies to demonstrate cost and efficiency improvements. Information Technology for Manufacturing describes how IT can help manufacturers e

Download or read book Manufacturing Technologies for Machines of the Future written by Anatoli I. Dashchenko and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most up-to-date view of manufacturing technologies. Written by leading experts from the USA, Europe, and Asia, both handbook and CD-ROM cover a wide range of topics ranging from industrial management and organization to automation and control, from mechanical to electronical technology, and from machine tools to the consumer goods industry. It gives a unique interdisciplinary and global presentation of material and combines, for the first time, theoretical and significant practical results from the last decades of the most important branches of machine building. Its broad coverage appeals to the highly skilled scientific expert as well as the experienced design engineer, and to undergraduate and advanced students.

Download or read book Advances In Manufacturing Technology VIII written by K Case and published by CRC Press. This book was released on 2004-01-14 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises the Proceedings of the Tenth National Conference on Manufacturing Research held at the University of Technology, Loughborough, UK, in September 1994, the latest in a series of meetings first convened in 1985, and the first to be published by Taylor & Francis Ltd.; Keith Case and Steven Newman, the Conference Chairs, the book contains R. H. Weston's keynote address, "Requirements and Trends in Manufacturing Systems", and over 140 contributions, which together represent the leading edge, state-of-the-art knowledge in the area of manufacturing and production engineering and management. The contributions are organized by theme: process planning; systems integration and modelling; simulation and scheduling; concurrent engineering and design; process control; and inspection; and thus demonstrate the enormous range of topics that manufacturing research embraces and their relevance to improving current industrial practice.

Download or read book The Optimal Introduction of New Manufacturing Technology Under Rivalry when Radical Technological Advance is Anticipated written by Mohamed Talbi and published by . This book was released on 1984 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Business Trends in Practice written by Bernard Marr and published by John Wiley & Sons. This book was released on 2021-11-15 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: WINNER OF THE BUSINESS BOOK OF THE YEAR AWARD 2022! Stay one step ahead of the competition with this expert review of the most impactful and disruptive business trends coming down the pike Far from slowing down, change and transformation in business seems to come only at a more and more furious rate. The last ten years alone have seen the introduction of groundbreaking new trends that pose new opportunities and challenges for leaders in all industries. In Business Trends in Practice: The 25+ Trends That Are Redefining Organizations, best-selling business author and strategist Bernard Marr breaks down the social and technological forces underlying these rapidly advancing changes and the impact of those changes on key industries. Critical consumer trends just emerging today—or poised to emerge tomorrow—are discussed, as are strategies for rethinking your organisation’s product and service delivery. The book also explores: Crucial business operations trends that are changing the way companies conduct themselves in the 21st century The practical insights and takeaways you can glean from technological and social innovation when you cut through the hype Disruptive new technologies, including AI, robotic and business process automation, remote work, as well as social and environmental sustainability trends Business Trends in Practice: The 25+ Trends That Are Redefining Organizations is a must-read resource for executives, business leaders and managers, and business development and innovation leads trying to get – and stay – on top of changes and disruptions that are right around the corner.