Download or read book New Frontiers for Metrology From Biology and Chemistry to Quantum and Data Science written by M.J.T. Milton and published by IOS Press. This book was released on 2021-12-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of standard and reliable measurements is essential in many areas of life, but nowhere is it of more crucial importance than in the world of science, and physics in particular. This book contains 20 contributions presented as part of Course 206 of the International School of Physics Enrico Fermi on New Frontiers for Metrology: From Biology and Chemistry to Quantum and Data Science, held in Varenna, Italy, from 4 -13 July 2019. The Course was the 7th in the Enrico Fermi series devoted to metrology, and followed a milestone in the history of measurement: the adoption of new definitions for the base units of the SI. During the Course, participants reviewed the decision and discussed how the new foundation for metrology is opening new possibilities for physics, with several of the lecturers reflecting on the implications for an easier exploration of the unification of quantum mechanics and gravity. A wide range of other topics were covered, from measuring color and appearance to atomic weights and radiation, and including the application of metrological principles to the management and interpretation of very large sets of scientific data and the application of metrology to biology. The book also contains a selection of posters from the best of those presented by students at the Course. Offering a fascinating exploration of the latest thinking on the subject of metrology, this book will be of interest to researchers and practitioners from many fields.

Download or read book New Frontiers for Metrology from Biology and Chemistry to Quantum and Data Science written by M. J. T. Milton and published by . This book was released on 2021-12-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of standard and reliable measurements is essential in many areas of life, but nowhere is it of more crucial importance than in the world of science, and physics in particular.This book contains 20 contributions presented as part of Course 206 of the International School of Physics Enrico Fermi on New Frontiers for Metrology: From Biology and Chemistry to Quantum and Data Science, held in Varenna, Italy, from 4 -13 July 2019. The Course was the 7th in the Enrico Fermi series devoted to metrology, and followed a milestone in the history of measurement: the adoption of new definitions for the base units of the SI. During the Course, participants reviewed the decision and discussed how the new foundation for metrology is opening new possibilities for physics, with several of the lecturers reflecting on the implications for an easier exploration of the unification of quantum mechanics and gravity. A wide range of other topics were covered, from measuring color and appearance to atomic weights and radiation, and including the application of metrological principles to the management and interpretation of very large sets of scientific data and the application of metrology to biology. The book also contains a selection of posters from the best of those presented by students at the Course.Offering a fascinating exploration of the latest thinking on the subject of metrology, this book will be of interest to researchers and practitioners from many fields.

Download or read book New Frontiers for Metrology From Biology and Chemistry to Quantum and Data Science written by M.J.T. Milton and published by IOS Press. This book was released on 2021-12-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of standard and reliable measurements is essential in many areas of life, but nowhere is it of more crucial importance than in the world of science, and physics in particular. This book contains 20 contributions presented as part of Course 206 of the International School of Physics Enrico Fermi on New Frontiers for Metrology: From Biology and Chemistry to Quantum and Data Science, held in Varenna, Italy, from 4 -13 July 2019. The Course was the 7th in the Enrico Fermi series devoted to metrology, and followed a milestone in the history of measurement: the adoption of new definitions for the base units of the SI. During the Course, participants reviewed the decision and discussed how the new foundation for metrology is opening new possibilities for physics, with several of the lecturers reflecting on the implications for an easier exploration of the unification of quantum mechanics and gravity. A wide range of other topics were covered, from measuring color and appearance to atomic weights and radiation, and including the application of metrological principles to the management and interpretation of very large sets of scientific data and the application of metrology to biology. The book also contains a selection of posters from the best of those presented by students at the Course. Offering a fascinating exploration of the latest thinking on the subject of metrology, this book will be of interest to researchers and practitioners from many fields.

Download or read book Metrological Infrastructure written by Beat Jeckelmann and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-07-24 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrology is part of the essential but largely hidden infrastructure of the modern world. This book concentrates on the infrastructure aspects of metrology. It introduces the underlying concepts: International system of units, traceability and uncertainty; and describes the concepts that are implemented to assure the comparability, reliability and quantifiable trust of measurement results. It is shown what benefits the traditional metrological principles have in fields as medicine or in the evaluation of cyber physical systems.

Download or read book Metrology from Physics Fundamentals to Quality of Life written by P. Tavella and published by IOS Press. This book was released on 2018-01-03 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metrology is a constantly evolving field, and one which has developed in many ways in the last four decades. This book presents the proceedings of the Enrico Fermi Summer School on the topic of Metrology, held in Varenna, Italy, from 26 June to 6 July 2017. This was the 6th Enrico Fermi summer school devoted to metrology, the first having been held in 1976. The 2017 program addressed two major new directions for metrology: the work done in preparation for a possible re-definition of four of the base units of the SI in 2018, and the impact of the application of metrology to issues addressing quality of life – such as global climate change and clinical and food analysis – on science, citizens and society. The lectures were grouped into three modules: metrology for quality of life; fundamentals of metrology; and physical metrology and fundamental constants, and topics covered included food supply and safety; biomarkers; monitoring climate and air quality; new IS units; measurement uncertainty; fundamental constants; electrical metrology; optical frequency standards; and photometry and light metrology. The book provides an overview of the topics and changes relevant to metrology today, and will be of interest to both academics and all those whose work involves any of the various aspects of this field.

Download or read book Metrology and Physical Constants written by A. Di Giuseppe and published by IOS Press. This book was released on 2013-10-21 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reliability and accuracy of systems of measurement continue to advance. We are about to enter a period of the most stable measurement system we can imagine with the anticipated new definitions of the SI units of measurement; a direct link between fundamental physics and metrology which will eliminate the current definition of the kilogram, until now based upon an artifact. This book presents selected papers from Course 185 of the Enrico Fermi International School of Physics, held in Varenna, Italy, in July 2012 and jointly organized with the Bureau International des Poids et Mesures (BIPM). The papers delivered at the school covered some of the most advanced topics in the discipline of metrology, including nano-technologies; quantum information and quantum devices; biology and medicine; food; surface quality; ionising radiation for health, environment, art and archaeology; and climate. The continuous and striking advances in basic research concerning atomic frequency standards operating both in the visible range and at microwave levels and the applications to satellite systems are also considered, in the framework of a historical review of the international organization of metrology, as are the problems inherent in uncertainty statements and definitions. This book will be of interest to all those whose work involves scientific measurement at the highest levels of accuracy.

Download or read book Physics of and Science with X Ray Free Electron Lasers written by J. Hastings and published by IOS Press. This book was released on 2020-12-18 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many X-Ray Free-Electron Lasers (X-FELs) have been designed, built and commissioned since the first lasing of the Linac Coherent Light Source in the hard and soft X-ray regions, and great progress has been made in improving their performance and extending their capabilities. Meanwhile, experimental techniques to exploit the unique properties of X-FELs to explore atomic and molecular systems of interest to physics, chemistry, biology and the material sciences have also been developed. As a result, our knowledge of atomic and molecular science has been greatly extended. Nevertheless, there is still much to be accomplished, and the potential for discovery with X-FELs is still largely unexplored. The next generation of scientists will need to be well versed in both particle beams/FEL physics and X-ray photon science. This book presents material from the Enrico Fermi summer school: Physics of and Science with X-Ray Free-Electron Lasers, held at the Enrico Fermi International School of Physics in Varenna, Italy, from 26 June - 1 July 2017. The lectures presented at the school were aimed at introducing graduate students and young scientists to this fast growing and exciting scientific area, and subjects covered include basic accelerator and FEL physics, as well as an introduction to the main research topics in X-FEL-based biology, atomic molecular optical science, material sciences, high-energy density physics and chemistry. Bridging the gap between accelerator/FEL physicists and scientists from other disciplines, the book will be of interest to all those working in the field.

Download or read book Quantum Matter at Ultralow Temperatures written by M. Inguscio and published by IOS Press. This book was released on 2016-09-27 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Enrico Fermi summer school on Quantum Matter at Ultralow Temperatures held on 7-15 July 2014 at Varenna, Italy, featured important frontiers in the field of ultracold atoms. For the last 25 years, this field has undergone dramatic developments, which were chronicled by several Varenna summer schools, in 1991 on Laser Manipulation of Atoms, in 1998 on Bose-Einstein Condensation in Atomic Gases, and in 2006 on Ultra-cold Fermi Gases. The theme of the 2014 school demonstrates that the field has now branched out into many different directions, where the tools and precision of atomic physics are used to realise new quantum systems, or in other words, to quantum-engineer interesting Hamiltonians. The topics of the school identify major new directions: Quantum gases with long range interactions, either due to strong magnetic dipole forces, due to Rydberg excitations, or, for polar molecules, due to electric dipole interactions; quantum gases in lower dimensions; quantum gases with disorder; atoms in optical lattices, now with single-site optical resolution; systems with non-trivial topological properties, e.g. with spin-orbit coupling or in artificial gauge fields; quantum impurity problems (Bose and Fermi polarons); quantum magnetism. Fermi gases with strong interactions, spinor Bose-Einstein condensates and coupled multi-component Bose gases or Bose-Fermi mixtures continue to be active areas. The current status of several of these areas is systematically summarized in this volume.

Download or read book Advances in Thermoelectricity Foundational Issues Materials and Nanotechnology written by D. Narducci and published by IOS Press. This book was released on 2021-06-22 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of thermoelectricity has continued to develop rapidly in recent years and remains one of the most exciting areas of research for a materials physicist. The need for sustainable energy has added a technological momentum to the challenge of devising materials with exceptional properties such as low thermal conductivity, high electrical conductivity and a large Seebeck coefficient, and has triggered a global, interdisciplinary effort. More recently, research on thermoelectric materials has promoted and motivated a major research endeavor to clarify the factors affecting thermal conductivity in nanostructures as part of a more general effort to apply nanotechnology to enhance the performance of thermoelectric materials for use in thermoelectric generators and coolers. This book contains the lectures presented as Course 207 of the International School of Physics Enrico Fermi, Advances in Thermoelectricity: Foundational Issues, Materials, and Nanotechnology, held in Varenna, Italy from 15 – 20 July 2019. This comprehensive course aimed to provide students with a modern vision of the physics of thermoelectric phenomena, starting from the thermodynamics of thermoelectricity and from the physics of transport processes and demonstrating how material structure and nanostructure, together with defects, have been used to tailor the physical properties of advanced thermoelectrics. Special attention was also given to areas of current research – from spin-caloritronics to charge transport in polymers – and to a selected number of applications for heat recovery. Encompassing the full complexity of modern thermoelectricity and covering the most cogent themes relevant to current research, the book will be of interest to all those working in the field.

Download or read book Introduction to Quantum Metrology written by Waldemar Nawrocki and published by Springer. This book was released on 2015-03-24 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the theory of quantum effects used in metrology and results of the author’s own research in the field of quantum electronics. The book provides also quantum measurement standards used in many branches of metrology for electrical quantities, mass, length, time and frequency. This book represents the first comprehensive survey of quantum metrology problems. As a scientific survey, it propagates a new approach to metrology with more emphasis on its connection with physics. This is of importance for the constantly developing technologies and nanotechnologies in particular. Providing a presentation of practical applications of the effects used in quantum metrology for the construction of quantum standards and sensitive electronic components, the book is useful for a wide audience of physicists and metrologists in the broad sense of both terms. In 2014 a new system of units, the so called Quantum SI, is introduced. This book helps to understand and approve the new system to both technology and academic community.

Download or read book Manipulating Quantum Systems written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-09-14 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of atomic, molecular, and optical (AMO) science underpins many technologies and continues to progress at an exciting pace for both scientific discoveries and technological innovations. AMO physics studies the fundamental building blocks of functioning matter to help advance the understanding of the universe. It is a foundational discipline within the physical sciences, relating to atoms and their constituents, to molecules, and to light at the quantum level. AMO physics combines fundamental research with practical application, coupling fundamental scientific discovery to rapidly evolving technological advances, innovation and commercialization. Due to the wide-reaching intellectual, societal, and economical impact of AMO, it is important to review recent advances and future opportunities in AMO physics. Manipulating Quantum Systems: An Assessment of Atomic, Molecular, and Optical Physics in the United States assesses opportunities in AMO science and technology over the coming decade. Key topics in this report include tools made of light; emerging phenomena from few- to many-body systems; the foundations of quantum information science and technologies; quantum dynamics in the time and frequency domains; precision and the nature of the universe, and the broader impact of AMO science.

Download or read book High performance Hybrid fibre Concrete written by Ivan Marković and published by IOS Press. This book was released on 2006 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In the research project presented in this PhD-thesis, an innovative type of fibre concrete is developed, with improved both the tensile strength and the ductility: the Hybrid-Fibre Concrete (HFC). The expression "Hybrid" refers to the "hybridisation" of fibres: short and long steel fibres were combined together in one concrete mixture. This is opposite to conventional steel fibre concretes, which contain only one type of fibre. The basic goal of combining short and long fibres is from one side to improve the tensile strength by the action of short fibres, and from the other side to improve the ductility by the action of long fibres." "In this research project, all important aspects needed for the development and application of Hybrid-Fibre Concrete have been considered. In total 15 mixtures, with different types and amounts of steel fibres were developed and tested in the fresh state (workability) as well as in the hardened state (uniaxial tensile tests, flexural tests, pullout tests of single fibres and compressive tests). A new analytical model for bridging of cracks by fibres was developed and successfully implemented for tensile softening response of HFC. At the end, the utilisation of HFC in the engineering practice was discussed, including a case-study on light prestressed long-span beams made of HFC."--BOOK JACKET.

Download or read book Beyond the Molecular Frontier written by National Research Council and published by National Academies Press. This book was released on 2003-03-19 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry and chemical engineering have changed significantly in the last decade. They have broadened their scopeâ€"into biology, nanotechnology, materials science, computation, and advanced methods of process systems engineering and controlâ€"so much that the programs in most chemistry and chemical engineering departments now barely resemble the classical notion of chemistry. Beyond the Molecular Frontier brings together research, discovery, and invention across the entire spectrum of the chemical sciencesâ€"from fundamental, molecular-level chemistry to large-scale chemical processing technology. This reflects the way the field has evolved, the synergy at universities between research and education in chemistry and chemical engineering, and the way chemists and chemical engineers work together in industry. The astonishing developments in science and engineering during the 20th century have made it possible to dream of new goals that might previously have been considered unthinkable. This book identifies the key opportunities and challenges for the chemical sciences, from basic research to societal needs and from terrorism defense to environmental protection, and it looks at the ways in which chemists and chemical engineers can work together to contribute to an improved future.

Download or read book Fuzzy Systems and Data Mining VII written by C. Shen and published by IOS Press. This book was released on 2021-11-04 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuzzy systems and data mining are indispensible aspects of the computer systems and algorithms on which the world has come to depend. This book presents papers from FSDM 2021, the 7th International Conference on Fuzzy Systems and Data Mining. The conference, originally due to take place in Seoul, South Korea, was held online on 26-29 October 2021, due to ongoing restrictions connected with the COVID-19 pandemic. The annual FSDM conference provides a platform for knowledge exchange between international experts, researchers, academics and delegates from industry. This year, the committee received 266 submissions, and this book contains 52 papers, including keynotes and invited presentations, oral and poster contributions. The papers cover four main areas: 1) fuzzy theory, algorithms and systems – including topics like stability; 2) fuzzy applications – which are widely used and cover various types of processing as well as hardware and architecture for big data and time series; 3) the interdisciplinary field of fuzzy logic and data mining; and 4) data mining itself. The topic most frequently addressed this year is fuzzy systems. The book offers an overview of research and developments in fuzzy logic and data mining, and will be of interest to all those working in the field of data science.

Download or read book Quantum Steampunk written by Nicole Yunger Halpern and published by JHU Press. This book was released on 2022-04-12 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The science-fiction genre known as steampunk juxtaposes futuristic technologies with Victorian settings. This fantasy is becoming reality at the intersection of two scientific fields-twenty-first-century quantum physics and nineteenth-century thermodynamics, or the study of energy-in a discipline known as quantum steampunk"--

Download or read book Quantum Computing written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-04-27 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Quantum mechanics, the subfield of physics that describes the behavior of very small (quantum) particles, provides the basis for a new paradigm of computing. First proposed in the 1980s as a way to improve computational modeling of quantum systems, the field of quantum computing has recently garnered significant attention due to progress in building small-scale devices. However, significant technical advances will be required before a large-scale, practical quantum computer can be achieved. Quantum Computing: Progress and Prospects provides an introduction to the field, including the unique characteristics and constraints of the technology, and assesses the feasibility and implications of creating a functional quantum computer capable of addressing real-world problems. This report considers hardware and software requirements, quantum algorithms, drivers of advances in quantum computing and quantum devices, benchmarks associated with relevant use cases, the time and resources required, and how to assess the probability of success.

Download or read book Design Procedure and Predictive Models for Solution Crystallisation Processes written by Sean Bermingham and published by Delft University Press. This book was released on 2003-05 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on both product and process performance of solution crystallisation processes.