Download or read book New Directions in Nonlinear Observer Design written by Hendrik Nijmeijer and published by Springer. This book was released on 1999-05-21 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The past decade has witnessed an increasing interest in observers for nonlinear systems. This subject is relevant in different contexts such as synchronization of complex dynamical systems, fault detection and isolation, and output feedback control. This book contains the contributions that are to be presented at the workshop "New Directions in Nonlinear Observer Design", to be held from June 24-26, 1999, in Geiranger Fjord, Norway. The workshop has been organised by Olav Egeland, Thor I. Fossen and Henk Nijmeijer; it will include participants from Africa, Asia, Europe and USA and it will focus on recent developments in the above mentioned areas. The contributions form a good review of present achievements and challenges in nonlinear observer design. The workshop is supported by the Strategic University Program on Marine Cybernetics at the Norwegian University of Science and Technology and ABB.

Download or read book Nonlinear Observers and Applications written by Gildas Besançon and published by Springer. This book was released on 2007-10-11 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this fantastically useful book is to lay out an overview on possible tools for state reconstruction in nonlinear systems. Here, basic observability notions and observer structures are recalled, together with ingredients for advanced designs on this basis. The problem of state reconstruction in dynamical systems, known as observer problem, is crucial for controlling or even merely monitoring processes. For linear systems, the theory has been well established for several years, so this book attempts to tackle the problem for non-linear systems.

Download or read book New Directions in Nonlinear Observer Design written by Henk Nijmeijer and published by . This book was released on 2014-01-15 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Directions and Applications in Control Theory written by Wijesuriya P. Dayawansa and published by Springer Science & Business Media. This book was released on 2005-08-31 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a collection of papers in control theory and applications presented at a conference in honor of Clyde Martin on the occasion of his 60th birthday, held in Lubbock, Texas, November 14-15, 2003.

Download or read book Control and Observer Design for Nonlinear Finite and Infinite Dimensional Systems written by Thomas Meurer and published by Springer Science & Business Media. This book was released on 2005-09-19 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a well balanced combination of state-of-the-art theoretical results in the field of nonlinear controller and observer design, combined with industrial applications stemming from mechatronics, electrical, (bio–) chemical engineering, and fluid dynamics. The unique combination of results of finite as well as infinite–dimensional systems makes this book a remarkable contribution addressing postgraduates, researchers, and engineers both at universities and in industry. The contributions to this book were presented at the Symposium on Nonlinear Control and Observer Design: From Theory to Applications (SYNCOD), held September 15–16, 2005, at the University of Stuttgart, Germany. The conference and this book are dedicated to the 65th birthday of Prof. Dr.–Ing. Dr.h.c. Michael Zeitz to honor his life – long research and contributions on the fields of nonlinear control and observer design.

Download or read book Nonlinear Control in the Year 2000 written by Alberto Isidori and published by Springer Science & Business Media. This book was released on 2000-11-17 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of nonlinear systems, one of the most active research areas in control theory, has always been a domain of natural convergence of research interests in applied mathematics and control engineering. The theory has developed from the early phase of its history, when the basic tool was essentially only the Lyapunov second method, to the present day, where the mathematics ranges from differential geometry, calculus of variations, ordinary and partial differential equations, functional analysis, abstract algebra and stochastic processes, while the applications to advanced engineering design span a wide variety of topics, which include nonlinear controllability and observability, optimal control, state estimation, stability and stabilization, feedback equivalence, motion planning, noninteracting control, disturbance attenuation, asymptotic tracking. The reader will find in the book methods and results which cover a wide variety of problems: starting from pure mathematics (like recent fundamental results on (non)analycity of small balls and the distance function), through its applications to all just mentioned topics of nonlinear control, up to industrial applications of nonlinear control algorithms.

Download or read book Algebraic Identification and Estimation Methods in Feedback Control Systems written by Hebertt Sira-Ramírez and published by John Wiley & Sons. This book was released on 2014-03-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Algebraic Identification and Estimation Methods in Feedback Control Systems presents a model-based algebraic approach to online parameter and state estimation in uncertain dynamic feedback control systems. This approach evades the mathematical intricacies of the traditional stochastic approach, proposing a direct model-based scheme with several easy-to-implement computational advantages. The approach can be used with continuous and discrete, linear and nonlinear, mono-variable and multi-variable systems. The estimators based on this approach are not of asymptotic nature, and do not require any statistical knowledge of the corrupting noises to achieve good performance in a noisy environment. These estimators are fast, robust to structured perturbations, and easy to combine with classical or sophisticated control laws. This book uses module theory, differential algebra, and operational calculus in an easy-to-understand manner and also details how to apply these in the context of feedback control systems. A wide variety of examples, including mechanical systems, power converters, electric motors, and chaotic systems, are also included to illustrate the algebraic methodology. Key features: Presents a radically new approach to online parameter and state estimation. Enables the reader to master the use and understand the consequences of the highly theoretical differential algebraic viewpoint in control systems theory. Includes examples in a variety of physical applications with experimental results. Covers the latest developments and applications. Algebraic Identification and Estimation Methods in Feedback Control Systems is a comprehensive reference for researchers and practitioners working in the area of automatic control, and is also a useful source of information for graduate and undergraduate students.

Download or read book Transport of Water versus Transport over Water written by Carlos Ocampo-Martinez and published by Springer. This book was released on 2015-06-03 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims at stimulating discussion between researchers working on state of the art approaches for operational control and design of transport of water on the one hand and researchers working on state of the art approaches for transport over water on the other hand. The main contribution of the book as a whole is to present novel perspectives ultimately leading to the management of an envisioned unified management framework taking the recent advances from both worlds as a baseline. The book is intended to be a reference for control-oriented engineers who manage water systems with either or both purposes in mind (transport of water, transport of goods over water). It highlights the possible twofold nature of water projects, where water either acts as primary object of study or as a means. The book is dedicated to comparing and relating to one another different strategies for (operational) management and control of different but strongly related systems in the framework of the water. In that sense, the book presents different approaches treating both the transport of water and transport over water. It compares the different approaches within the same field, highlighting their distinguishing features and advantages according to selected qualitative indices, and demonstrates the interaction and cross-relations between both fields. It will also help to determine the gaps and common points for both fields towards the design of such a unifying framework, which is lacking in the literature. Additionally, the book looks at case studies where the design of modeling/control strategies of either transport of water or transport over water have been proposed, discussed or simulated.

Download or read book Models and Applications of Chaos Theory in Modern Sciences written by Elhadj Zeraoulia and published by CRC Press. This book was released on 2011-09-07 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a select group of papers that provide a comprehensive view of the models and applications of chaos theory in medicine, biology, ecology, economy, electronics, mechanical, and the human sciences. Covering both the experimental and theoretical aspects of the subject, it examines a range of current topics of interest. It consid

Download or read book Advances in the Control of Nonlinear Systems written by Alfonso Banos and published by Springer Science & Business Media. This book was released on 2001-02-19 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is based on the course notes of the 2nd NCN Pedagogical School, the second in the series of Pedagogical Schools in the frame work of the European TMR project, "Breakthrough in the control of nonlinear systems (Nonlinear Control Network)". The school consists of four courses that have been chosen to give a broad range of techniques for the analysis and synthesis of nonlinear control systems, and have been developed by leading experts in the field. The topics covered are: Differential Algebraic Methods in Nonlinear Systems; Nonlinear QFT; Hybrid Systems; Physics in Control. The book has a pedagogical character, and is specially directed to postgraduates in most areas of engineering and applied sciences like mathematics and physics. It will also be of interest to researchers and practitioners needing a solid introduction to the above topics.

Download or read book Wind Solar Hybrid Renewable Energy System written by Kenneth Eloghene Okedu and published by BoD – Books on Demand. This book was released on 2020-02-26 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a platform for scientists and engineers to comprehend the technologies of solar wind hybrid renewable energy systems and their applications. It describes the thermodynamic analysis of wind energy systems, and advanced monitoring, modeling, simulation, and control of wind turbines. Based on recent hybrid technologies considering wind and solar energy systems, this book also covers modeling, design, and optimization of wind solar energy systems in conjunction with grid-connected distribution energy management systems comprising wind photovoltaic (PV) models. In addition, solar thermochemical fuel generation topology and evaluation of PV wind hybrid energy for a small island are also included in this book. Since energy storage plays a vital role in renewable energy systems, another salient part of this book addresses the methodology for sizing hybrid battery-backed power generation systems in off-grid connected locations. Furthermore, the book proposes solutions for sustainable rural development via passive solar housing schemes, and the impacts of renewable energies in general, considering social, economic, and environmental factors. Because this book proposes solutions based on recent challenges in the area of hybrid renewable technologies, it is hoped that it will serve as a useful reference to readers who would like to be acquainted with new strategies of control and advanced technology regarding wind solar hybrid systems

Download or read book Optimization and Applications written by Nicholas Olenev and published by Springer Nature. This book was released on 2020-11-05 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 11th International Conference on Optimization and Applications, OPTIMA 2020, held in Moscow, Russia, in September-October 2020.* The 21 full and 2 short papers presented were carefully reviewed and selected from 60 submissions. The papers cover such topics as mathematical programming, combinatorial and discrete optimization, optimal control, optimization in economics, finance, and social sciences, global optimization, and applications. * The conference was held virtually due to the COVID-19 pandemic.

Download or read book Assessment and Future Directions of Nonlinear Model Predictive Control written by Rolf Findeisen and published by Springer. This book was released on 2007-09-08 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thepastthree decadeshaveseenrapiddevelopmentin the areaofmodelpred- tive control with respect to both theoretical and application aspects. Over these 30 years, model predictive control for linear systems has been widely applied, especially in the area of process control. However, today’s applications often require driving the process over a wide region and close to the boundaries of - erability, while satisfying constraints and achieving near-optimal performance. Consequently, the application of linear control methods does not always lead to satisfactory performance, and here nonlinear methods must be employed. This is one of the reasons why nonlinear model predictive control (NMPC) has - joyed signi?cant attention over the past years,with a number of recent advances on both the theoretical and application frontier. Additionally, the widespread availability and steadily increasing power of today’s computers, as well as the development of specially tailored numerical solution methods for NMPC, bring thepracticalapplicabilityofNMPCwithinreachevenforveryfastsystems.This has led to a series of new, exciting developments, along with new challenges in the area of NMPC.

Download or read book Handbook of Marine Craft Hydrodynamics and Motion Control written by Thor I. Fossen and published by John Wiley & Sons. This book was released on 2021-04-19 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of MARINE CRAFT HYDRODYNAMICS AND MOTION CONTROL The latest tools for analysis and design of advanced GNC systems Handbook of Marine Craft Hydrodynamics and Motion Control is an extensive study of the latest research in hydrodynamics, guidance, navigation, and control systems for marine craft. The text establishes how the implementation of mathematical models and modern control theory can be used for simulation and verification of control systems, decision-support systems, and situational awareness systems. Coverage includes hydrodynamic models for marine craft, models for wind, waves and ocean currents, dynamics and stability of marine craft, advanced guidance principles, sensor fusion, and inertial navigation. This important book includes the latest tools for analysis and design of advanced GNC systems and presents new material on unmanned underwater vehicles, surface craft, and autonomous vehicles. References and examples are included to enable engineers to analyze existing projects before making their own designs, as well as MATLAB scripts for hands-on software development and testing. Highlights of this Second Edition include: Topical case studies and worked examples demonstrating how you can apply modeling and control design techniques to your own designs A Github repository with MATLAB scripts (MSS toolbox) compatible with the latest software releases from Mathworks New content on mathematical modeling, including models for ships and underwater vehicles, hydrostatics, and control forces and moments New methods for guidance and navigation, including line-of-sight (LOS) guidance laws for path following, sensory systems, model-based navigation systems, and inertial navigation systems This fully revised Second Edition includes innovative research in hydrodynamics and GNC systems for marine craft, from ships to autonomous vehicles operating on the surface and under water. Handbook of Marine Craft Hydrodynamics and Motion Control is a must-have for students and engineers working with unmanned systems, field robots, autonomous vehicles, and ships. MSS toolbox: https://github.com/cybergalactic/mss Lecture notes: https://www.fossen.biz/wiley Author’s home page: https://www.fossen.biz

Download or read book Advances in Automatic Control written by Mihail Voicu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the academic year 2002-2003, the Faculty of Automatic Control and Computer Engineering of Ia~i (Romania), and its Departments of Automatic Control and Industrial Informatics and of Computer Engineering respectively, celebrated 25 years from the establishment of the specialization named Automatic Control and Computer Engineering within the framework of the former Faculty of Electrical Engineering of Ia~i, and, at the same time, 40 years since the first courses on Automatic Control and Computers respectively, were introduced in the curricula of the former specializations of Electromechanical Engineering and Electrical Power Engineering at the already mentioned Faculty of Electrical Engineering. The reader interested to know some important moments ofour evolution during the last five decades is invited to see the Addendum ofthis volume, where a short history is presented. And, to highlight once more the nice coincidences, it must be noted here that in 2003 our Technical University "Gheorghe Asachi" of Ia~i celebrated 190 years from the emergence of the first cadastral engineering degree course in Ia~i (thanks to the endeavor ofGheorghe Asachi), which is today considered to be the beginningofthe engineering higher education in Romania. Generally speaking, an anniversary is a celebration meant to mark special events ofthe past, with festivities to be performed solemnly and publicly according to a specific ritual.

Download or read book State space Realisations of Linear 2 D Systems with Extensions to the General ND n 2 Case written by Krzysztof Galkowski and published by Springer Science & Business Media. This book was released on 2001-01-29 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates the newly developed Elementary Operations Algorithm (EOA). This is a systematic method for constructing a range of state-space realizations for 2-D systems. The key achievements of the monograph are as follows: - It provides a research-level introduction to the general area and undertakes a comparative critical review of previous approaches. - It gives a thorough coverage of the theoretical basis of the EOA algorithm. - It demonstrates the effectiveness of the EOA algorithm, for example, through the use of algebraic symbolic computing (using MAPLE), as well as by comparing this method with common alternatives.

Download or read book Control of Flexible link Manipulators Using Neural Networks written by H.A. Talebi and published by Springer Science & Business Media. This book was released on 2001-01-29 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of Flexible-link Manipulators Using Neural Networks addresses the difficulties that arise in controlling the end-point of a manipulator that has a significant amount of structural flexibility in its links. The non-minimum phase characteristic, coupling effects, nonlinearities, parameter variations and unmodeled dynamics in such a manipulator all contribute to these difficulties. Control strategies that ignore these uncertainties and nonlinearities generally fail to provide satisfactory closed-loop performance. This monograph develops and experimentally evaluates several intelligent (neural network based) control techniques to address the problem of controlling the end-point of flexible-link manipulators in the presence of all the aforementioned difficulties. To highlight the main issues, a very flexible-link manipulator whose hub exhibits a considerable amount of friction is considered for the experimental work. Four different neural network schemes are proposed and implemented on the experimental test-bed. The neural networks are trained and employed as online controllers.