Download or read book New Approaches in Automation and Robotics written by Harald Aschemann and published by IntechOpen. This book was released on 2008-05-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book New Approaches in Automation and Robotics offers in 22 chapters a collection of recent developments in automation, robotics as well as control theory. It is dedicated to researchers in science and industry, students, and practicing engineers, who wish to update and enhance their knowledge on modern methods and innovative applications. The authors and editor of this book wish to motivate people, especially under-graduate students, to get involved with the interesting field of robotics and mechatronics. We hope that the ideas and concepts presented in this book are useful for your own work and could contribute to problem solving in similar applications as well. It is clear, however, that the wide area of automation and robotics can only be highlighted at several spots but not completely covered by a single book.
Download or read book New Approaches in Automation and Robotics written by Harald Aschemann and published by IntechOpen. This book was released on 2008-05-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book New Approaches in Automation and Robotics offers in 22 chapters a collection of recent developments in automation, robotics as well as control theory. It is dedicated to researchers in science and industry, students, and practicing engineers, who wish to update and enhance their knowledge on modern methods and innovative applications. The authors and editor of this book wish to motivate people, especially under-graduate students, to get involved with the interesting field of robotics and mechatronics. We hope that the ideas and concepts presented in this book are useful for your own work and could contribute to problem solving in similar applications as well. It is clear, however, that the wide area of automation and robotics can only be highlighted at several spots but not completely covered by a single book.
Download or read book New Approaches in Automation and Robotics written by Harald Aschemann and published by BoD – Books on Demand. This book was released on 2008-05-01 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book New Approaches in Automation and Robotics offers in 22 chapters a collection of recent developments in automation, robotics as well as control theory. It is dedicated to researchers in science and industry, students, and practicing engineers, who wish to update and enhance their knowledge on modern methods and innovative applications. The authors and editor of this book wish to motivate people, especially under-graduate students, to get involved with the interesting field of robotics and mechatronics. We hope that the ideas and concepts presented in this book are useful for your own work and could contribute to problem solving in similar applications as well. It is clear, however, that the wide area of automation and robotics can only be highlighted at several spots but not completely covered by a single book.
Download or read book Robotics and Automation Handbook written by Thomas R. Kurfess and published by CRC Press. This book was released on 2018-10-03 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the capability and utility of robots has increased dramatically with new technology, robotic systems can perform tasks that are physically dangerous for humans, repetitive in nature, or require increased accuracy, precision, and sterile conditions to radically minimize human error. The Robotics and Automation Handbook addresses the major aspects of designing, fabricating, and enabling robotic systems and their various applications. It presents kinetic and dynamic methods for analyzing robotic systems, considering factors such as force and torque. From these analyses, the book develops several controls approaches, including servo actuation, hybrid control, and trajectory planning. Design aspects include determining specifications for a robot, determining its configuration, and utilizing sensors and actuators. The featured applications focus on how the specific difficulties are overcome in the development of the robotic system. With the ability to increase human safety and precision in applications ranging from handling hazardous materials and exploring extreme environments to manufacturing and medicine, the uses for robots are growing steadily. The Robotics and Automation Handbook provides a solid foundation for engineers and scientists interested in designing, fabricating, or utilizing robotic systems.
Download or read book Distributed Control of Robotic Networks written by Francesco Bullo and published by Princeton University Press. This book was released on 2009-07-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained introduction to the distributed control of robotic networks offers a distinctive blend of computer science and control theory. The book presents a broad set of tools for understanding coordination algorithms, determining their correctness, and assessing their complexity; and it analyzes various cooperative strategies for tasks such as consensus, rendezvous, connectivity maintenance, deployment, and boundary estimation. The unifying theme is a formal model for robotic networks that explicitly incorporates their communication, sensing, control, and processing capabilities--a model that in turn leads to a common formal language to describe and analyze coordination algorithms. Written for first- and second-year graduate students in control and robotics, the book will also be useful to researchers in control theory, robotics, distributed algorithms, and automata theory. The book provides explanations of the basic concepts and main results, as well as numerous examples and exercises. Self-contained exposition of graph-theoretic concepts, distributed algorithms, and complexity measures for processor networks with fixed interconnection topology and for robotic networks with position-dependent interconnection topology Detailed treatment of averaging and consensus algorithms interpreted as linear iterations on synchronous networks Introduction of geometric notions such as partitions, proximity graphs, and multicenter functions Detailed treatment of motion coordination algorithms for deployment, rendezvous, connectivity maintenance, and boundary estimation
Download or read book Automation and Collaborative Robotics written by Peter Matthews and published by Apress. This book was released on 2020-06-30 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the current and future research into technologies that underpin the increasing capabilities of automation technologies and their impact on the working world of the future. Rapid advances in automation and robotics technologies are often reported in the trade and general media, often relying on scary headlines such as “Jobs Lost to Robots.” It is certainly true that work will change with the advent of smarter and faster automated workers; however, the scope and scale of the changes is still unknown. Automation may seem to be here already, but we are only at the early stages. Automation and Collaborative Robotics explores the output of current research projects that are improving the building blocks of an automated world. Research into collaborative robotics (cobotics) is merging digital, audio, and visual data to generate a commonly held view between cobots and their human collaborators. Low-power machine learning at the edge of the network can deliver decision making on cobots or to their manipulations. Topics covered in this book include: Robotic process automation, chatbots, and their impact in the near future The hype of automation and headlines leading to concerns over the future of work Component technologies that are still in the research labs Foundational technologies and collaboration that will enable many tasks to be automated with human workers being re-skilled and displaced rather than replaced What You Will Learn Be aware of the technologies currently being researched to improve or deliver automation Understand the impact of robotics, other automation technologies, and the impact of AI on automation Get an idea of how far we are from implementation of an automated future Know what work will look like in the future with the deployment of these technologies Who This Book Is For Technical and business managers interested in the future of automation and robotics, and the impact it will have on their organizations, customers, and the business world in general
Download or read book New Approaches in Automation and Robotics written by Harald Aschemann and published by IntechOpen. This book was released on 2008-05-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book New Approaches in Automation and Robotics offers in 22 chapters a collection of recent developments in automation, robotics as well as control theory. It is dedicated to researchers in science and industry, students, and practicing engineers, who wish to update and enhance their knowledge on modern methods and innovative applications. The authors and editor of this book wish to motivate people, especially under-graduate students, to get involved with the interesting field of robotics and mechatronics. We hope that the ideas and concepts presented in this book are useful for your own work and could contribute to problem solving in similar applications as well. It is clear, however, that the wide area of automation and robotics can only be highlighted at several spots but not completely covered by a single book.
Download or read book Robotics Industry 4 0 Issues New Intelligent Control Paradigms written by Alla G. Kravets and published by Springer Nature. This book was released on 2020-01-06 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on open issues of new intelligent control paradigms and their usage. Industry 4.0 requires new approaches in the context of secure connection, control, and maintenance of robotic systems, as well as enhancing their interaction with humans. The book presents recent advances in industrial robotics, and robotic design and modeling for various domains, and discusses the methodological foundations of the collaborative robotics concept as a breakthrough in modern industrial technologies. It also describes the implementation of multi-agent models, programs and methods that could be used in future processes for control, condition assessment, diagnostics, prognostication, and proactive maintenance. Further, the book addresses the issue of ensuring the space robotics systems and proposes reliable novel solutions. The authors also illustrate the integration of deep-learning methods and mathematical modeling based on examples of successful robotic systems in various countries, and analyze the connections between robotic modeling and design from the positions of new industrial challenges. The book is intended for practitioners and enterprise representatives, as well as scientists and Ph.D. and Master’s students pursuing research in the area of cyber-physical system development and implementation in various domains.
Download or read book New Laws of Robotics written by Frank Pasquale and published by Harvard University Press. This book was released on 2020-10-27 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: AI is poised to disrupt our work and our lives. We can harness these technologies rather than fall captive to them—but only through wise regulation. Too many CEOs tell a simple story about the future of work: if a machine can do what you do, your job will be automated. They envision everyone from doctors to soldiers rendered superfluous by ever-more-powerful AI. They offer stark alternatives: make robots or be replaced by them. Another story is possible. In virtually every walk of life, robotic systems can make labor more valuable, not less. Frank Pasquale tells the story of nurses, teachers, designers, and others who partner with technologists, rather than meekly serving as data sources for their computerized replacements. This cooperation reveals the kind of technological advance that could bring us all better health care, education, and more, while maintaining meaningful work. These partnerships also show how law and regulation can promote prosperity for all, rather than a zero-sum race of humans against machines. How far should AI be entrusted to assume tasks once performed by humans? What is gained and lost when it does? What is the optimal mix of robotic and human interaction? New Laws of Robotics makes the case that policymakers must not allow corporations or engineers to answer these questions alone. The kind of automation we get—and who it benefits—will depend on myriad small decisions about how to develop AI. Pasquale proposes ways to democratize that decision making, rather than centralize it in unaccountable firms. Sober yet optimistic, New Laws of Robotics offers an inspiring vision of technological progress, in which human capacities and expertise are the irreplaceable center of an inclusive economy.
Download or read book Robotics and Automation in Construction written by Carlos Balaguer and published by IntechOpen. This book was released on 2008-10-01 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses several issues related to the introduction of automaton and robotics in the construction industry in a collection of 23 chapters. The chapters are grouped in 3 main sections according to the theme or the type of technology they treat. Section I is dedicated to describe and analyse the main research challenges of Robotics and Automation in Construction (RAC). The second section consists of 12 chapters and is dedicated to the technologies and new developments employed to automate processes in the construction industry. Among these we have examples of ICT technologies used for purposes such as construction visualisation systems, added value management systems, construction materials and elements tracking using multiple IDs devices. This section also deals with Sensorial Systems and software used in the construction to improve the performances of machines such as cranes, and in improving Human-Machine Interfaces (MMI). Authors adopted Mixed and Augmented Reality in the MMI to ease the construction operations. Section III is dedicated to describe case studies of RAC and comprises 8 chapters. Among the eight chapters the section presents a robotic excavator and a semi-automated façade cleaning system. The section also presents work dedicated to enhancing the force of the workers in construction through the use of Robotic-powered exoskeletons and body joint-adapted assistive units, which allow the handling of greater loads.
Download or read book New Approaches in Automation and Robotics written by Harald Aschemann and published by IntechOpen. This book was released on 2008-05-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book New Approaches in Automation and Robotics offers in 22 chapters a collection of recent developments in automation, robotics as well as control theory. It is dedicated to researchers in science and industry, students, and practicing engineers, who wish to update and enhance their knowledge on modern methods and innovative applications. The authors and editor of this book wish to motivate people, especially under-graduate students, to get involved with the interesting field of robotics and mechatronics. We hope that the ideas and concepts presented in this book are useful for your own work and could contribute to problem solving in similar applications as well. It is clear, however, that the wide area of automation and robotics can only be highlighted at several spots but not completely covered by a single book.
Download or read book Advances in Automation and Robotics Research written by Héctor A. Moreno and published by Springer Nature. This book was released on 2021-11-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 3rd Latin American Congress on Automation and Robotics, held at Monterrey, Mexico, on November 17–19, 2021. This book presents recent advances in the modeling, design, control, and development of autonomous and robotic systems and explores current exciting applications and future challenges of these technologies. The scope of this book covers a wide range of research fields associated with automation and robotics encountered within engineering, scientific research, and practice. These topics are related to autonomous systems, industrial automation and robotics, modelling and systems identification, simulation procedures and experimental validations, control theory, artificial intelligence, computer vision, sensing and sensor fusion, multi-robot and multi-agent systems, field and service robotics, human robot interaction and interfaces, modelling of robotic systems, and the design of new robotic platforms.
Download or read book Trends in Control and Decision Making for Human Robot Collaboration Systems written by Yue Wang and published by Springer. This book was released on 2017-01-24 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of recent research developments in the automation and control of robotic systems that collaborate with humans. A measure of human collaboration being necessary for the optimal operation of any robotic system, the contributors exploit a broad selection of such systems to demonstrate the importance of the subject, particularly where the environment is prone to uncertainty or complexity. They show how such human strengths as high-level decision-making, flexibility, and dexterity can be combined with robotic precision, and ability to perform task repetitively or in a dangerous environment. The book focuses on quantitative methods and control design for guaranteed robot performance and balanced human experience from both physical human-robot interaction and social human-robot interaction. Its contributions develop and expand upon material presented at various international conferences. They are organized into three parts covering: one-human–one-robot collaboration; one-human–multiple-robot collaboration; and human–swarm collaboration. Individual topic areas include resource optimization (human and robotic), safety in collaboration, human trust in robot and decision-making when collaborating with robots, abstraction of swarm systems to make them suitable for human control, modeling and control of internal force interactions for collaborative manipulation, and the sharing of control between human and automated systems, etc. Control and decision-making algorithms feature prominently in the text, importantly within the context of human factors and the constraints they impose. Applications such as assistive technology, driverless vehicles, cooperative mobile robots, manufacturing robots and swarm robots are considered. Illustrative figures and tables are provided throughout the book. Researchers and students working in controls, and the interaction of humans and robots will learn new methods for human–robot collaboration from this book and will find the cutting edge of the subject described in depth.
Download or read book Robotics Automation and Control in Industrial and Service Settings written by Luo, Zongwei and published by IGI Global. This book was released on 2015-09-10 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: ###############################################################################################################################################################################################################################################################
Download or read book Recent Advances in Robotics and Automation written by Gourab Sen Gupta and published by Springer. This book was released on 2013-05-23 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: There isn’t a facet of human life that has not been touched and influenced by robots and automation. What makes robots and machines versatile is their computational intelligence. While modern intelligent sensors and powerful hardware capabilities have given a huge fillip to the growth of intelligent machines, the progress in the development of algorithms for smart interaction, collaboration and pro-activeness will result in the next quantum jump. This book deals with the recent advancements in design methodologies, algorithms and implementation techniques to incorporate intelligence in robots and automation systems. Several articles deal with navigation, localization and mapping of mobile robots, a problem that engineers and researchers are grappling with all the time. Fuzzy logic, neural networks and neuro-fuzzy based techniques for real world applications have been detailed in a few articles. This edited volume is targeted to present the latest state-of-the-art computational intelligence techniques in Robotics and Automation. It is a compilation of the extended versions of the very best papers selected from the many that were presented at the 5th International Conference on Automation, Robotics and Applications (ICARA 2011) which was held in Wellington, New Zealand from 6-8 December, 2011. Scientists and engineers who work with robots and automation systems will find this book very useful and stimulating.
Download or read book Probabilistic Approaches to Robotic Perception written by João Filipe Ferreira and published by Springer. This book was released on 2013-08-30 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tries to address the following questions: How should the uncertainty and incompleteness inherent to sensing the environment be represented and modelled in a way that will increase the autonomy of a robot? How should a robotic system perceive, infer, decide and act efficiently? These are two of the challenging questions robotics community and robotic researchers have been facing. The development of robotic domain by the 1980s spurred the convergence of automation to autonomy, and the field of robotics has consequently converged towards the field of artificial intelligence (AI). Since the end of that decade, the general public’s imagination has been stimulated by high expectations on autonomy, where AI and robotics try to solve difficult cognitive problems through algorithms developed from either philosophical and anthropological conjectures or incomplete notions of cognitive reasoning. Many of these developments do not unveil even a few of the processes through which biological organisms solve these same problems with little energy and computing resources. The tangible results of this research tendency were many robotic devices demonstrating good performance, but only under well-defined and constrained environments. The adaptability to different and more complex scenarios was very limited. In this book, the application of Bayesian models and approaches are described in order to develop artificial cognitive systems that carry out complex tasks in real world environments, spurring the design of autonomous, intelligent and adaptive artificial systems, inherently dealing with uncertainty and the “irreducible incompleteness of models”.
Download or read book Futureproof written by Kevin Roose and published by Random House. This book was released on 2021-03-09 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, deeply reported survival guide for the age of AI, written by the New York Times tech columnist who has introduced millions to the promise and pitfalls of artificial intelligence. “Artificial intelligence can be terrifying, but Kevin Roose provides a clear, compelling strategy for surviving the next wave of technology with our jobs—and souls—intact.”—Charles Duhigg, author of The Power of Habit It’s time to get real about AI. After decades of hype and sci-fi fantasies, AI—artificial intelligence—is leaping out of research labs and into the center of our lives. Millions of people now use tools like ChatGPT and DALL-E 2 to write essays, create art and finish coding projects. AI programs are already beating humans in fields like law, medicine and entertainment, and they’re getting better every day. But AI doesn’t just threaten our jobs. It shapes our entire human experience, steering our behavior and influencing our choices about which TV shows to watch, which clothes to buy, and which politicians to vote for. And while many experts argue about whether a robot apocalypse is near, one critical question has gone unanswered: In a world where AI is ascendant, how can humans survive and thrive? In Futureproof: 9 Rules for Humans in the Age of Automation, New York Times technology columnist Kevin Roose shares the secrets of people and organizations that have successfully navigated waves of technological change, and explains what skills are necessary to stay ahead of the curve today, with lessons like • Be surprising, social, and scarce • Resist machine drift • Leave handprints • Demote your devices • Treat AI like a chimp army Roose rejects the conventional wisdom that in order to compete with AI, we have to become more like robots ourselves—hyper-efficient, data-driven workhorses. Instead, he says, we should focus on being more human, and doing the kinds of creative, inspiring, and meaningful things even the most advanced algorithms can’t do.
