Download or read book New Advances in High Entropy Alloys written by Yong Zhang and published by MDPI. This book was released on 2021-02-16 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, people have tended to adjust the degree of order/disorder to explore new materials. The degree of order/disorder can be measured by entropy, and it can be divided into two parts: topological disordering and chemical disordering. The former mainly refers to order in the spatial configuration, e.g., amorphous alloys which show short-range ordering but without long-range ordering, while the latter mainly refers to the order in the chemical occupancy, that is to say, the components can replace each other, and typical representatives are high-entropy alloy (HEAs). HEAs, in sharp contrast to traditional alloys based on one or two principal elements, have one striking characteristic: their unusually high entropy of mixing. They have not received much noticed until the review paper entitled “Microstructure and Properties of High-Entropy Alloys” was published in 2014 in the journal of Progress in Materials Science. Numerous reports have shown they exhibit five recognized performance characteristics, namely, strength–plasticity trade-off breaking, irradiation tolerance, corrosion resistance, high-impact toughness within a wider temperature range, and high thermal stability. So far, the development of HEAs has gone through three main stages: 1. Quinary equal-atomic single-phase solid solution alloys; 2. Quaternary or quinary non-equal-atomic multiphase alloys; 3. Medium-entropy alloys, high-entropy fibers, high-entropy films, lightweight HEAs, etc. Nowadays, more in-depth research on high-entropy alloys is urgently needed.

Download or read book Advances in High Entropy Alloys written by Jiro Kitagawa and published by BoD – Books on Demand. This book was released on 2021-09-22 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-entropy alloys (HEAs) are a new class of materials attracting attention from researchers all over the world. This book provides a comprehensive overview of the research on HEAs, as well as discusses the mechanical, physical, and chemical properties of new HEAs and their potential applications. Chapters cover such topics as HEA superconductors, HEA composites, high-entropy superalloys, artificial intelligence in HEA design, and more.

Download or read book High Entropy Alloys written by B.S. Murty and published by Elsevier. This book was released on 2019-03-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Entropy Alloys, Second Edition provides a complete review of the current state of the field of high entropy alloys (HEA). Building upon the first edition, this fully updated release includes new theoretical understandings of these materials, highlighting recent developments on modeling and new classes of HEAs, such as Eutectic HEAs and Dual phase HEAs. Due to their unique properties, high entropy alloys have attracted considerable attention from both academics and technologists. This book presents the fundamental knowledge, the spectrum of various alloy systems and their characteristics, key focus areas, and the future scope of the field in terms of research and technological applications. Provides an up-to-date, comprehensive understanding on the current status of HEAs in terms of theoretical understanding and modeling efforts Gives a complete idea on alloy design criteria of various classes of HEAs developed so far Discusses the microstructure property correlations in HEAs in terms of structural and functional properties Presents a comparison of HEAs with other multicomponent systems, like intermetallics and bulk metallic glasses

Download or read book High Entropy Alloys written by T.S. Srivatsan and published by CRC Press. This book was released on 2020-07-20 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a cohesive overview of innovations, advances in processing and characterization, and applications for high entropy alloys (HEAs) in performance-critical and non-performance-critical sectors. It covers manufacturing and processing, advanced characterization and analysis techniques, and evaluation of mechanical and physical properties. With chapters authored by a team of internationally renowned experts, the volume includes discussions on high entropy thermoelectric materials, corrosion and thermal behavior of HEAs, improving fracture resistance, fatigue properties and high tensile strength of HEAs, HEA films, and more. This work will be of interest to academics, scientists, engineers, technologists, and entrepreneurs working in the field of materials and metals development for advanced applications. Features Addresses a broad spectrum of HEAs and related aspects, including manufacturing, processing, characterization, and properties Emphasizes the application of HEAs Aimed at researchers, engineers, and scientists working to develop materials for advanced applications T.S. Srivatsan, PhD, Professor of Materials Science and Engineering in the Department of Mechanical Engineering at the University of Akron (Ohio, USA), earned his MS in Aerospace Engineering in 1981 and his PhD in Mechanical Engineering in 1984 from the Georgia Institute of Technology (USA). He has authored or edited 65 books, delivered over 200 technical presentations, and authored or co-authored more than 700 archival publications in journals, book chapters, book reviews, proceedings of conferences, and technical reports. His RG score is 45 with a h-index of 53 and Google Scholar citations of 9000, ranking him to be among the top 2% of researchers in the world. He is a Fellow of (i) the American Society for Materials International, (ii) the American Society of Mechanical Engineers, and (iii) the American Association for Advancement of Science. Manoj Gupta, PhD, is Associate Professor of Materials at NUS, Singapore. He is a former Head of Materials Division of the Mechanical Engineering Department and Director Designate of Materials Science and Engineering Initiative at NUS, Singapore. In August 2017, he was highlighted among the Top 1% Scientists of the World by the Universal Scientific Education and Research Network and in the Top 2.5% among scientists as per ResearchGate. In 2018, he was announced as World Academy Championship Winner in the area of Biomedical Sciences by the International Agency for Standards and Ratings. A multiple award winner, he actively collaborates/visits as an invited researcher and visiting and chair professor in Japan, France, Saudi Arabia, Qatar, China, the United States, and India.

Download or read book High Entropy Alloys written by Michael C. Gao and published by Springer. This book was released on 2016-04-27 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive description of high-entropy alloys (HEAs). The authors summarize key properties of HEAs from the perspective of both fundamental understanding and applications, which are supported by in-depth analyses. The book also contains computational modeling in tackling HEAs, which help elucidate the formation mechanisms and properties of HEAs from various length and time scales.

Download or read book Structure and Properties of High Entropy Alloys written by V. E. Gromov and published by Springer Nature. This book was released on 2021-07-10 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of high entropy alloys, explaining all the basics of this new class of materials that emerged at the beginning of the 21st: It begins with the basics of the manufacturing methods of high entropy alloys and discusses the mechanical properties and deformation mechanisms of high entropy alloys. Then the book addresses the stability of these alloys and explores the prospects of high entropy alloys for applications.This book is intended as an introduction for physicists and materials scientists who need to become familiar with high entropy alloys.

Download or read book High Entropy Materials written by Yong Zhang and published by Springer. This book was released on 2019-05-27 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book draws on the latest research to discuss the history and development of high-entropy alloys and ceramics in bulk, film, and fiber form. High-entropy materials have recently been developed using the entropy of mixing and entropy of configuration of materials, and have proven to exhibit unique properties superior to those of conventional materials. The field of high-entropy alloys was born in 2004, and has since been developed for both scientific and engineering applications. Although there is extensive literature, this field is rapidly transforming. This book highlights the cutting edge of high-entropy materials, including their fundamentals and applications. Above all, it reflects two major milestones in their development: the equi-atomic ratio single-phase high-entropy alloys; and the non-equi-atomic ratio dual-phase high-entropy alloys.

Download or read book Complex Concentrated Alloys CCAs written by Sundeep Mukherjee and published by MDPI. This book was released on 2020-11-04 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of several unique articles on the current state of research on complex concentrated alloys, as well as their compelling future opportunities in wide ranging applications. Complex concentrated alloys consist of multiple principal elements and represent a new paradigm in structural alloy design. They show a range of exceptional properties that are unachievable in conventional alloys, including high strength–ductility combination, resistance to oxidation, corrosion/wear resistance, and excellent high-temperature properties. The research articles, reviews, and perspectives are intended to provide a wholistic view of this multidisciplinary subject of interest to scientists and engineers.

Download or read book High Entropy Materials written by Weidong Li and published by Mdpi AG. This book was released on 2021-11-16 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a reprint of a special issue of Metals (ISSN 2075-4701), titled High Entropy Materials: Challenges and Prospects. It is a compilation of nine articles from different aspects of high-entropy materials. The book primarily focuses on high-entropy alloys, the first emergent high-entropy materials, but also covers high-entropy ceramics and high-entropy composites, which are the extensions of high-entropy alloys. The articles on high-entropy alloys cover some important facets in the field such as phase structures, mechanical properties, laser beam welding, design of soft magnetic alloys, and potential as biomaterials. In addition, there are one article introducing the potential of using high-entropy carbides as hard metals for machining, and one another on high-entropy composite studying the microstructures and tribological properties of the FeCoNiCuAl-TiC composite. The goal of this reprinted book is essentially two-fold. In the first place, it offers a platform for researchers in the broad field of high-entropy materials to communicate their views and recent research on the subject. Next, it reports challenges in the sub-fields of high-entropy materials and inspires researchers to continue to practice diligence to resolve these challenges and advance high-entropy materials solidly. We hope that readers in the field feel encouraged, inspired, and challenged by the book, and readers outside the field can grasp some basic ideals of high-entropy materials and their potential to the society as a family of novel materials.

Download or read book High Entropy Alloys written by T.S. Srivatsan and published by CRC Press. This book was released on 2020-07-21 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a cohesive overview of innovations, advances in processing and characterization, and applications for high entropy alloys (HEAs) in performance-critical and non-performance-critical sectors. It covers manufacturing and processing, advanced characterization and analysis techniques, and evaluation of mechanical and physical properties. With chapters authored by a team of internationally renowned experts, the volume includes discussions on high entropy thermoelectric materials, corrosion and thermal behavior of HEAs, improving fracture resistance, fatigue properties and high tensile strength of HEAs, HEA films, and more. This work will be of interest to academics, scientists, engineers, technologists, and entrepreneurs working in the field of materials and metals development for advanced applications. Features Addresses a broad spectrum of HEAs and related aspects, including manufacturing, processing, characterization, and properties Emphasizes the application of HEAs Aimed at researchers, engineers, and scientists working to develop materials for advanced applications T.S. Srivatsan, PhD, Professor of Materials Science and Engineering in the Department of Mechanical Engineering at the University of Akron (Ohio, USA), earned his MS in Aerospace Engineering in 1981 and his PhD in Mechanical Engineering in 1984 from the Georgia Institute of Technology (USA). He has authored or edited 65 books, delivered over 200 technical presentations, and authored or co-authored more than 700 archival publications in journals, book chapters, book reviews, proceedings of conferences, and technical reports. His RG score is 45 with a h-index of 53 and Google Scholar citations of 9000, ranking him to be among the top 2% of researchers in the world. He is a Fellow of (i) the American Society for Materials International, (ii) the American Society of Mechanical Engineers, and (iii) the American Association for Advancement of Science. Manoj Gupta, PhD, is Associate Professor of Materials at NUS, Singapore. He is a former Head of Materials Division of the Mechanical Engineering Department and Director Designate of Materials Science and Engineering Initiative at NUS, Singapore. In August 2017, he was highlighted among the Top 1% Scientists of the World by the Universal Scientific Education and Research Network and in the Top 2.5% among scientists as per ResearchGate. In 2018, he was announced as World Academy Championship Winner in the area of Biomedical Sciences by the International Agency for Standards and Ratings. A multiple award winner, he actively collaborates/visits as an invited researcher and visiting and chair professor in Japan, France, Saudi Arabia, Qatar, China, the United States, and India.

Download or read book Engineering Steels and High Entropy Alloys written by Ashutosh Sharma and published by BoD – Books on Demand. This book was released on 2020-06-24 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book entitled “Engineering Steels and High Entropy-Alloys” presents an overview of various types of advanced steels and high entropy alloys. It also discusses the current research trends, problems, and applications of engineering steels and high entropy materials. The book also gives a brief overview of advances in surface protection strategies of steels and laser processing of materials (additive manufacturing). The various key features of this book include: 1. A comprehensive overview of various types of engineering steels, phase transformation, and applications in engineering. 2. A complete detailed understanding and mechanism of high entropy materials, including high entropy alloys and ceramics. 3. Descriptions of structure-property relationships in high entropy materials and their application in various fields such as biomedical implants. 4. A brief review of various laser processing (additive manufacturing) and surface protection of advanced materials."

Download or read book High Entropy Alloys written by Anil Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-03-20 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an analysis of the state-of-the-art in high entropy alloys (HEA). In order to increase the qualities of an alloy, one major element is typically chosen and other elements are added to it in small amounts. In order to create multi-component alloys without a single major element, Professor J.W. Yeh described a novel method of alloy design in 2004. This method involved mixing elements in equiatomic or nearly equiatomic proportions. HEAs have a wide range of structural and physical properties and may find use in various applications. HEAs are intended to have high configurational entropy. The fundamental information now known in the subject, the range of different alloy systems and the features that have been investigated so far, the current major study fields, and the technological applications are presented in this book. Includes high entropy alloy fabrication and phase development. Discusses thermodynamic design criteria to develop HEAs. Covers the HEAs functioning characteristics. Compares the different processing routes used for the synthesis of HEAs

Download or read book High Entropy Alloys written by Ghulam Yasin and published by Elsevier. This book was released on 2024-08-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-Entropy Alloys: Design, Manufacturing, and Emerging Applications presents cutting-edge advances in the field of high-entropy alloys (HEAs), covering the mechanics of these alloys, methods of manufacturing them, and their applications, all while emphasizing the link between their structure/microstructure and functional properties. The book starts with a section on the fundamentals of these materials, with chapters that discuss their thermodynamics, subgroups (transition metal; refractory; ceramics; metallic glasses and more), physical metallurgy, and microstructural characterization. The next section features chapters that look at manufacturing processes of HEAs, such as liquid metallurgy synthesis, in-situ synthesis, additive manufacturing, machine learning, friction stir welding, and fabrication of coatings for HEAs. The final section of the book covers applications of these materials, including their use as irradiation-resistant structural materials, catalyst materials, electrode materials, HEAs for solid hydrogen storage, and more. Covers the mechanics, manufacturing, and applications of functionally-oriented high-entropy alloys (HEA) Discusses the metallurgical composition of HEAs, their microstructural characterization, thermal stability, and how to manufacture them via powder metallurgy, additive manufacturing, and friction stir welding Reviews applications of HEAs such as for irradiation-resistant structural materials, in biomedical settings, as catalyst materials, for solid hydrogen storage, and more

Download or read book High Entropy Materials written by Yong Zhang and published by CRC Press. This book was released on 2023-08-09 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the field of high-entropy materials is advancing rapidly. High-Entropy Materials: Advances and Applications focuses on materials discovered using the high-entropy alloys (HEA) strategy. It discusses various types of high-entropy materials, such as face-centered cubic (FCC) and body-centered cubic (BCC) HEAs, films and coatings, fibers, and powders and hard-cemented carbides, along with current research status and applications: • Describes, compositions and processing of high-entropy materials. • Summarizes industrially valuable alloys found in high-entropy materials that hold promise for promotion and application. • Explains how high-entropy materials can be used in many fields and can outperform traditional materials. This book is aimed at researchers, advanced students, and academics in materials science and engineering and related disciplines.

Download or read book Microjoining and Nanojoining written by Y N Zhou and published by Elsevier. This book was released on 2008-03-27 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many important advances in technology have been associated with nanotechnology and the miniaturization of components, devices and systems. Microjoining has been closely associated with the evolution of microelectronic packaging, but actually covers a much broader area, and is essential for manufacturing many electronic, precision and medical products. Part one reviews the basics of microjoining, including solid-state bonding and fusion microwelding. Part two covers microjoining and nanojoining processes, such as bonding mechanisms and metallurgy, process development and optimization, thermal stresses and distortion, positioning and fixturing, sensing, and numerical modelling. Part three discusses microjoining of materials such as plastics, ceramics, metals and advanced materials such as shape memory alloys and nanomaterials. The book also discusses applications of microjoining such as joining superconductors, the manufacture of medical devices and the sealing of solid oxide fuel cells. This book provides a comprehensive overview of the fundamental aspects of microjoining processes and techniques. It is a valuable reference for production engineers, designers and researchers using or studying microjoining technologies in such industries as microelectronics and biomedical engineering. Reviews the basics of nanojoining including solid-state bonding and fusion microwelding Covers microjoining and nanojoining processes such as bonding mechanisms and metallurgy, sensing and numerical modelling Examines applications of microjoining such as the manufacturing of medical devices, and the sealing of solid oxide fuel cells

Download or read book High Entropy Materials written by Yong Zhang and published by CRC Press. This book was released on 2023-08-09 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research in the field of high-entropy materials is advancing rapidly. High-Entropy Materials: Advances and Applications focuses on materials discovered using the high-entropy alloys (HEA) strategy. It discusses various types of high-entropy materials, such as face-centered cubic (FCC) and body-centered cubic (BCC) HEAs, films and coatings, fibers, and powders and hard-cemented carbides, along with current research status and applications: • Describes, compositions and processing of high-entropy materials. • Summarizes industrially valuable alloys found in high-entropy materials that hold promise for promotion and application. • Explains how high-entropy materials can be used in many fields and can outperform traditional materials. This book is aimed at researchers, advanced students, and academics in materials science and engineering and related disciplines.

Download or read book Metastable Microstructures written by Dipankar Banerjee and published by . This book was released on 1993 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: