Download or read book Network of Things Engineering NoTE Lab written by Admela Jukan and published by Springer Nature. This book was released on 2023-04-21 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a hands-on experience in software and hardware engineering of IoT devices in edge and cloud computing systems, by putting in practice state-of-the-art concepts of hardware devices, networking and computing software. It proposes a Network of Things Engineering (NoTE) Lab, with seven hands-on lab modules covering topics ranging from “Interfacing sensors and actuators” and “Connecting IoT and Edge with MQTT" to “Data pipelining in cloud computing”. All tools and software used in the NoTE Lab are free and open source, and available to the readers. Specifically, Arduino-based boards that support a variety of low-cost sensors and actuators are used in IoT context. In edge computing, NoTE Lab implements off-the-shelf single board computers, Raspberry Pis with corresponding software and hardware. For cloud, well-known and widely used cloud computing open-source tools (e.g., Kubernetes) are deployed, where readers can learn the basics of monitoring and managing containers in cloud computing. Three communication protocols are used in the end-to-end setup, including MQTT, AMQP and HTTP. This lab book is a "must experiment with" for anybody in academia and industry participating in the fascinating IoT-edge-cloud continuum development.

Download or read book IoT Fundamentals written by David Hanes and published by Cisco Press. This book was released on 2017-05-30 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, billions of devices are Internet-connected, IoT standards and protocols are stabilizing, and technical professionals must increasingly solve real problems with IoT technologies. Now, five leading Cisco IoT experts present the first comprehensive, practical reference for making IoT work. IoT Fundamentals brings together knowledge previously available only in white papers, standards documents, and other hard-to-find sources—or nowhere at all. The authors begin with a high-level overview of IoT and introduce key concepts needed to successfully design IoT solutions. Next, they walk through each key technology, protocol, and technical building block that combine into complete IoT solutions. Building on these essentials, they present several detailed use cases, including manufacturing, energy, utilities, smart+connected cities, transportation, mining, and public safety. Whatever your role or existing infrastructure, you’ll gain deep insight what IoT applications can do, and what it takes to deliver them. Fully covers the principles and components of next-generation wireless networks built with Cisco IOT solutions such as IEEE 802.11 (Wi-Fi), IEEE 802.15.4-2015 (Mesh), and LoRaWAN Brings together real-world tips, insights, and best practices for designing and implementing next-generation wireless networks Presents start-to-finish configuration examples for common deployment scenarios Reflects the extensive first-hand experience of Cisco experts

Download or read book Internet of Things written by Vlasios Tsiatsis and published by Academic Press. This book was released on 2018-11-16 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internet of Things: Technologies and Applications for a New Age of Intelligence outlines the background and overall vision for the Internet of Things (IoT) and Cyber-Physical Systems (CPS), as well as associated emerging technologies. Key technologies are described including device communication and interactions, connectivity of devices to cloud-based infrastructures, distributed and edge computing, data collection, and methods to derive information and knowledge from connected devices and systems using artificial intelligence and machine learning. Also included are system architectures and ways to integrate these with enterprise architectures, and considerations on potential business impacts and regulatory requirements. New to this edition: • Updated material on current market situation and outlook.• A description of the latest developments of standards, alliances, and consortia. More specifically the creation of the Industrial Internet Consortium (IIC) and its architecture and reference documents, the creation of the Reference Architectural Model for Industrie 4.0 (RAMI 4.0), the exponential growth of the number of working groups in the Internet Engineering Task Force (IETF), the transformation of the Open Mobile Alliance (OMA) to OMA SpecWorks and the introduction of OMA LightweightM2M device management and service enablement protocol, the initial steps in the specification of the architecture of Web of Things (WoT) by World Wide Consortium (W3C), the GS1 architecture and standards, the transformation of ETSI-M2M to oneM2M, and a few key facts about the Open Connectivity Forum (OCF), IEEE, IEC/ISO, AIOTI, and NIST CPS.• The emergence of new technologies such as distributed ledgers, distributed cloud and edge computing, and the use of machine learning and artificial intelligence for IoT.• A chapter on security, outlining the basic principles for secure IoT installations.• New use case description material on Logistics, Autonomous Vehicles, and Systems of CPS - Standards organizations covered: IEEE, 3GPP, IETF, IEC/ISO, Industrial Internet Consortium (IIC), ITU-T, GS1, Open Geospatial Consortium (OGC), Open Mobile Alliance (OMA, e.g. LightweightM2M), Object Management Group (OMG, e.g. Business Process Modelling Notation (BPMN)), oneM2M, Open Connectivity Forum (OCF), W3C - Key technologies for IoT covered: Embedded systems hardware and software, devices and gateways, capillary networks, local and wide area networking, IoT data management and data warehousing, data analytics and big data, complex event processing and stream analytics, control systems, machine learning and artificial intelligence, distributed cloud and edge computing, and business process and enterprise integration - In-depth security solutions for IoT systems - Technical explanations combined with design features of IoT and use cases, which help the development of real-world solutions - Detailed descriptions of the architectures and technologies that form the basis of IoT - Clear examples of IoT use cases from real-world implementations such as Smart Grid, Smart Buildings, Smart Cities, Logistics and Participatory Sensing, Industrial Automation, and Systems of CPS - Market perspectives, IoT evolution, and future outlook

Download or read book Building and Automating Penetration Testing Labs in the Cloud written by Joshua Arvin Lat and published by Packt Publishing Ltd. This book was released on 2023-10-13 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Take your penetration testing career to the next level by discovering how to set up and exploit cost-effective hacking lab environments on AWS, Azure, and GCP Key Features Explore strategies for managing the complexity, cost, and security of running labs in the cloud Unlock the power of infrastructure as code and generative AI when building complex lab environments Learn how to build pentesting labs that mimic modern environments on AWS, Azure, and GCP Purchase of the print or Kindle book includes a free PDF eBook Book DescriptionThe significant increase in the number of cloud-related threats and issues has led to a surge in the demand for cloud security professionals. This book will help you set up vulnerable-by-design environments in the cloud to minimize the risks involved while learning all about cloud penetration testing and ethical hacking. This step-by-step guide begins by helping you design and build penetration testing labs that mimic modern cloud environments running on AWS, Azure, and Google Cloud Platform (GCP). Next, you’ll find out how to use infrastructure as code (IaC) solutions to manage a variety of lab environments in the cloud. As you advance, you’ll discover how generative AI tools, such as ChatGPT, can be leveraged to accelerate the preparation of IaC templates and configurations. You’ll also learn how to validate vulnerabilities by exploiting misconfigurations and vulnerabilities using various penetration testing tools and techniques. Finally, you’ll explore several practical strategies for managing the complexity, cost, and risks involved when dealing with penetration testing lab environments in the cloud. By the end of this penetration testing book, you’ll be able to design and build cost-effective vulnerable cloud lab environments where you can experiment and practice different types of attacks and penetration testing techniques.What you will learn Build vulnerable-by-design labs that mimic modern cloud environments Find out how to manage the risks associated with cloud lab environments Use infrastructure as code to automate lab infrastructure deployments Validate vulnerabilities present in penetration testing labs Find out how to manage the costs of running labs on AWS, Azure, and GCP Set up IAM privilege escalation labs for advanced penetration testing Use generative AI tools to generate infrastructure as code templates Import the Kali Linux Generic Cloud Image to the cloud with ease Who this book is forThis book is for security engineers, cloud engineers, and aspiring security professionals who want to learn more about penetration testing and cloud security. Other tech professionals working on advancing their career in cloud security who want to learn how to manage the complexity, costs, and risks associated with building and managing hacking lab environments in the cloud will find this book useful.

Download or read book Springer Handbook of Internet of Things written by Sébastien Ziegler and published by Springer Nature. This book was released on with total page 998 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Internet of Things written by Jan Holler and published by Academic Press. This book was released on 2014-04-08 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines the background and overall vision for the Internet of Things (IoT) and Machine-to-Machine (M2M) communications and services, including major standards. Key technologies are described, and include everything from physical instrumentation of devices to the cloud infrastructures used to collect data. Also included is how to derive information and knowledge, and how to integrate it into enterprise processes, as well as system architectures and regulatory requirements. Real-world service use case studies provide the hands-on knowledge needed to successfully develop and implement M2M and IoT technologies sustainably and profitably. Finally, the future vision for M2M technologies is described, including prospective changes in relevant standards. This book is written by experts in the technology and business aspects of Machine-to-Machine and Internet of Things, and who have experience in implementing solutions. - Standards included: ETSI M2M, IEEE 802.15.4, 3GPP (GPRS, 3G, 4G), Bluetooth Low Energy/Smart, IETF 6LoWPAN, IETF CoAP, IETF RPL, Power Line Communication, Open Geospatial Consortium (OGC) Sensor Web Enablement (SWE), ZigBee, 802.11, Broadband Forum TR-069, Open Mobile Alliance (OMA) Device Management (DM), ISA100.11a, WirelessHART, M-BUS, Wireless M-BUS, KNX, RFID, Object Management Group (OMG) Business Process Modelling Notation (BPMN) - Key technologies for M2M and IoT covered: Embedded systems hardware and software, devices and gateways, capillary and M2M area networks, local and wide area networking, M2M Service Enablement, IoT data management and data warehousing, data analytics and big data, complex event processing and stream analytics, knowledge discovery and management, business process and enterprise integration, Software as a Service and cloud computing - Combines both technical explanations together with design features of M2M/IoT and use cases. Together, these descriptions will assist you to develop solutions that will work in the real world - Detailed description of the network architectures and technologies that form the basis of M2M and IoT - Clear guidelines and examples of M2M and IoT use cases from real-world implementations such as Smart Grid, Smart Buildings, Smart Cities, Participatory Sensing, and Industrial Automation - A description of the vision for M2M and its evolution towards IoT

Download or read book Wireless Communications Networking and Applications written by Qing-An Zeng and published by Springer. This book was released on 2015-10-28 with total page 1265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a series of conferences on Wireless Communications, Networking and Applications that have been held on December 27-28, 2014 in Shenzhen, China. The meetings themselves were a response to technological developments in the areas of wireless communications, networking and applications and facilitate researchers, engineers and students to share the latest research results and the advanced research methods of the field. The broad variety of disciplines involved in this research and the differences in approaching the basic problems are probably typical of a developing field of interdisciplinary research. However, some main areas of research and development in the emerging areas of wireless communication technology can now be identified. The contributions to this book are mainly selected from the papers of the conference on wireless communications, networking and applications and reflect the main areas of interest: Section 1 - Emerging Topics in Wireless and Mobile Computing and Communications; Section 2 - Internet of Things and Long Term Evolution Engineering; Section 3 - Resource Allocation and Interference Management; Section 4 - Communication Architecture, Algorithms, Modeling and Evaluation; Section 5 - Security, Privacy, and Trust; and Section 6 - Routing, Position Management and Network Topologies.

Download or read book Internet of Things A Confluence of Many Disciplines written by Augusto Casaca and published by Springer Nature. This book was released on 2020-03-18 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed post-conference proceedings of the Second IFIP International Cross-Domain Conference on Internet of Things, IFIPIoT 2019, held in Tampa, USA, in October/ November 2019. The 11 full papers presented were carefully reviewed and selected from 22 submissions. Also included in this volume are 8 invited papers. The papers are organized in the following topical sections: IoT applications; context reasoning and situational awareness; IoT security; smart and low power IoT; smart network architectures; and smart system design and IoT education.

Download or read book Internet of Things and Its Applications written by Keshav Dahal and published by Springer Nature. This book was released on 2022-02-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes selected papers presented at the International Conference on IoT and its Applications 2020. The research papers presented were carefully reviewed and selected from several initial submissions on the topics - the Internet of Things (IoT) and its applications such as smart cities, smart devices, agriculture, transportation and logistics, healthcare, etc. The book contains peer-reviewed chapters written by leading international scholars from around the world. This book will appeal to students, practitioners, industry professionals, and researchers working in the field of IoT and its integration with other technologies to develop comprehensive solutions to real-life problems.

Download or read book Security and Privacy in the Internet of Things written by Ali Ismail Awad and published by John Wiley & Sons. This book was released on 2021-12-29 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: SECURITY AND PRIVACY IN THE INTERNET OF THINGS Provides the authoritative and up-to-date information required for securing IoT architecture and applications The vast amount of data generated by the Internet of Things (IoT) has made information and cyber security vital for not only personal privacy, but also for the sustainability of the IoT itself. Security and Privacy in the Internet of Things brings together high-quality research on IoT security models, architectures, techniques, and application domains. This concise yet comprehensive volume explores state-of-the-art mitigations in IoT security while addressing important security and privacy challenges across different IoT layers. The book provides timely coverage of IoT architecture, security technologies and mechanisms, and applications. The authors outline emerging trends in IoT security and privacy with a focus on areas such as smart environments and e-health. Topics include authentication and access control, attack detection and prevention, securing IoT through traffic modeling, human aspects in IoT security, and IoT hardware security. Presenting the current body of knowledge in a single volume, Security and Privacy in the Internet of Things: Discusses a broad range of IoT attacks and defense mechanisms Examines IoT security and privacy protocols and approaches Covers both the logical and physical security of IoT devices Addresses IoT security through network traffic modeling Describes privacy preserving techniques in smart cities Explores current threat and vulnerability analyses Security and Privacy in the Internet of Things: Architectures, Techniques, and Applications is essential reading for researchers, industry practitioners, and students involved in IoT security development and IoT systems deployment.

Download or read book International Conference on Intelligent Data Communication Technologies and Internet of Things ICICI 2018 written by Jude Hemanth and published by Springer. This book was released on 2018-12-20 with total page 1636 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses data communication and computer networking, communication technologies and the applications of IoT (Internet of Things), big data, cloud computing and healthcare informatics. It explores, examines and critiques intelligent data communications and presents inventive methodologies in communication technologies and IoT. Aimed at researchers and academicians who need to understand the importance of data communication and advanced technologies in IoT, it offers different perspectives to help readers increase their knowledge and motivates them to conduct research in the area, highlighting various innovative ideas for future research.

Download or read book The Challenges of the Digital Transformation in Education written by Michael E. Auer and published by Springer. This book was released on 2019-02-28 with total page 1003 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers the latest research and new perspectives on Interactive Collaborative Learning and Engineering Pedagogy. We are currently witnessing a significant transformation in education, and in order to face today’s real-world challenges, higher education has to find innovative ways to quickly respond to these new needs. Addressing these aspects was the chief aim of the 21st International Conference on Interactive Collaborative Learning (ICL2018), which was held on Kos Island, Greece from September 25 to 28, 2018. Since being founded in 1998, the conference has been devoted to new approaches in learning, with a special focus on collaborative learning. Today the ICL conferences offer a forum for exchanging information on relevant trends and research results, as well as sharing practical experiences in learning and engineering pedagogy. This book includes papers in the fields of: * New Learning Models and Applications * Pilot Projects: Applications * Project-based Learning * Real-world Experiences * Remote and Virtual Laboratories * Research in Engineering Pedagogy * Technical Teacher Training It will benefit a broad readership, including policymakers, educators, researchers in pedagogy and learning theory, school teachers, the learning industry, further education lecturers, etc.

Download or read book Introduction to Industrial Internet of Things and Industry 4 0 written by Sudip Misra and published by CRC Press. This book was released on 2021-01-07 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial IoT (IIoT) and Industry 4.0 are newly developing and fast emerging domains of interest among students, researchers, and professionals in academia and industry. Due to the popular demand of this topic, Introduction to Industrial Internet of Things and Industry 4.0 is written to serve a diverse readership from the domains of computer science and engineering, mechanical engineering, information technology, industrial engineering, electronics engineering, and other related branches of engineering. Based on the lead author’s massive open online courses (MOOCs), this book can be used as a textbook on the emerging paradigm of Industry 4.0 and IIoT, as well as a reference for professionals working in sectors of IIoT. The book covers the significant aspects of IIoT in detail, including sensors, actuators, data transmission, and data acquisition, which form the core of IIoT. Topics and concepts are presented in a comprehensive manner, so that readers can develop expertise and knowledge. The book helps beginners to gain a basic idea of Industry 4.0 and IIoT as the first section is an overview of IoT applications, infrastructure-based protocols, cloud computing, and fog computing. The second section is designed to impart a basic knowledge of Industry 4.0 and IIoT as well as of the different phases of development in industry. Delving into more advanced areas, other sections in the book cover: The business models and reference architecture of IIoT The technological aspects of Industry 4.0 and IIoT Predictive and prescriptive analytics applied in IIoT-based implementations Applications and case studies of IIoT Key enabling technologies of IIoT To aid students and professional master IIoT and Industry 4.0, the book includes conceptual questions, exercises, and learning objectives.

Download or read book The Internet of Things written by Christian Floerkemeier and published by Springer. This book was released on 2008-03-15 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: ThisvolumecontainstheproceedingsoftheInternetofThings(IOT)Conference 2008, the ?rst international conference of its kind. The conference took place in Zurich,Switzerland, March26–28,2008. The term ‘Internet of Things’ hascome to describe a number of technologies and researchdisciplines that enable the - ternet to reach out into the real world of physical objects. Technologies such as RFID, short-range wireless communications, real-time localization, and sensor networks are becoming increasingly common, bringing the ‘Internet of Things’ into industrial, commercial, and domestic use. IOT 2008 brought together le- ing researchersand practitioners, from both academia and industry, to facilitate the sharing of ideas, applications, and research results. IOT 2008 attracted 92 high-quality submissions, from which the technical program committee accepted 23 papers, resulting in a competitive 25% acc- tance rate. In total, there were over 250 individual authors from 23 countries, representing both academic and industrial organizations. Papers were selected solely on the quality of their blind peer reviews. We were fortunate to draw on the combined experience of our 59 program committee members, coming from the most prestigious universities and research labs in Europe, North America, Asia, and Australia. Program committee members were aided by no less than 63 external reviewers in this rigorous process, in which each committee member wrote about 6 reviews. The total of 336 entered reviews resulted in an average of 3. 7 reviews per paper, or slightly more than 1000 words of feedback for each paper submitted.

Download or read book Advances in Computer Science and Ubiquitous Computing written by James J. (Jong Hyuk) Park and published by Springer. This book was released on 2016-12-01 with total page 1143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the combined proceedings of the 8th International Conference on Computer Science and its Applications (CSA-16) and the 11st International Conference on Ubiquitous Information Technologies and Applications (CUTE 2016), both held in Bangkok, Thailand, December 19 - 21, 2016. The aim of these two meetings was to promote discussion and interaction among academics, researchers and professionals in the field of ubiquitous computing technologies. These proceedings reflect the state-of-the-art in the development of computational methods, involving theory, algorithm, numerical simulation, error and uncertainty analysis and novel application of new processing techniques in engineering, science, and other disciplines related to ubiquitous computing.

Download or read book Creating a Teacher Collective written by Maria Impedovo and published by Rowman & Littlefield. This book was released on 2023-06-05 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book addresses the following challenge: How do we create and sustain a teacher community? For practitioners, the main question in this handbook is: How do we build and facilitate teacher communities? The different chapters discuss teacher interaction for learning and professional development in light of three constructs: the group, the community, and the network. There is a wealth of literature, especially on theoretical frameworks, success factors, and barriers to participation in teacher communities. However, this book addresses the need for a step-by-step guide with valuable suggestions for those who want to create (from scratch) and support a community of teachers brought together to deal with specific issues and, importantly, mediated by educational technology

Download or read book Network World written by and published by . This book was released on 1988-12-19 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: For more than 20 years, Network World has been the premier provider of information, intelligence and insight for network and IT executives responsible for the digital nervous systems of large organizations. Readers are responsible for designing, implementing and managing the voice, data and video systems their companies use to support everything from business critical applications to employee collaboration and electronic commerce.