Download or read book Near critical and supercritical hydrothermal flow synthesis of metal oxide nanoparticles and hybrid metal oxide nanoparticles presenting clickable anchors written by Daschner de Tercero, Maren and published by KIT Scientific Publishing. This book was released on 2014-11-26 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The continuous hydrothermal flow synthesis of functionalized and non-functionalized nanoparticle dispersions was pursued. Besides improving the understanding of the relationship between process variables and the resulting nanoparticle dispersions, the usability of this process was extended by introducing clickable organic modifiers, a step toward the development of a convenient and versatile process for the synthesis of metal oxide nanoparticles with universal anchors on their surface."--Publisher's website.
Download or read book Near critical and Supercritical Hydrothermal Flow Synthesis of Metal Oxide Nanoparticles and Hybrid Metal Oxide Nanoparticles Presenting Clickable Anchors written by Maren Daschner de Tercero and published by . This book was released on 2020-10-09 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuous hydrothermal flow synthesis of functionalized and non-functionalized nanoparticle dispersions was pursued. Besides improving the understanding of the relationship between process variables and the resulting nanoparticle dispersions, the usability of this process was extended by introducing clickable organic modifiers, a step toward the development of a convenient and versatile process for the synthesis of metal oxide nanoparticles with universal anchors on their surface. This work was published by Saint Philip Street Press pursuant to a Creative Commons license permitting commercial use. All rights not granted by the work's license are retained by the author or authors.
Download or read book Synthesis of Nanostructured Materials in Near and or Supercritical Fluids written by Can Erkey and published by Elsevier. This book was released on 2021-11-27 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthesis of Nanostructured Materials in Near and/or Supercritical Fluids: Methods, Fundamentals and Modeling offers a comprehensive review of the current status of research, development and insights on promising future directions, covering the synthesis of nanostructured materials using supercritical fluid-based processes. The book presents fundamental aspects such as high-pressure phase behavior of complex mixtures, thermodynamics and kinetics of adsorption from supercritical solutions, mechanisms of particle formation phenomena in supercritical fluid-based processes, and models for further development. It bridges the gap between theory and application, and is a valuable resource for scientists, researchers and students alike. - Includes thermodynamic and mass transfer data necessary for industrial plant design - Explains the mechanisms of reactions in a supercritical fluid environment - Lists numerous industrial processes for the production of many consumer products
Download or read book Particle Formation with Supercritical Fluids written by Michael Turk and published by Elsevier. This book was released on 2014-11-06 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle formation with supercritical fluids is a promising alternative to conventional precipitation processes as it allows the reduction of particle size and control of morphology and particle size distribution without degradation or contamination of the product. The book comprehensively examines the current status of research and development and provides perspectives and insights on promising future directions.The introduction to high pressure and high temperature phase equilibria and nucleation phenomena provides the basic principles of the underlying physical and chemical phenomena, allowing the reader an understanding of the relationship between process conditions and particle characteristics.Bridging the gap between theory and application, the book imparts the scientific and engineering fundamentals for innovative particle formation processes. The interdisciplinary "modus operandi" will encourage cooperation between scientists and researchers from different but complementary disciplines. - Focuses on the general principles of particle formation in supercritical fluids - Considers high pressure and high temperature phase equilibria, fluid dynamics and nucleation theory - Discusses the underlying physical and chemical phenomena needed to understand the different applications, pointing out the relationship between process conditions and product properties
Download or read book Continuous and Batch Hydrothermal Synthesis of Metal Oxide Nanoparticles and Metal Oxide activated Carbon Nanocomposites written by Chunbao Xu and published by . This book was released on 2006 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuous hydrothermal technique was also extended to materials other than metal oxides by synthesizing lithium iron phosphate. Differences in the particle sizes obtained using the batch and continuous methods were shown to be due to the different mechanisms of particle formation in the two techniques. Better particle characteristics (size, size distribution and morphology) were obtained using the continuous hydrothermal technique than using the batch hydrothermal method.
Download or read book Semi conducting Metal Oxide Nanoparticles from a Low pressure Premixed H 1tn2 O 1tn2 Ar Flame Synthesis and Characterization written by Pascal Onyibo Ifeacho and published by Cuvillier Verlag. This book was released on 2008 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthesis of Metal and Metal Oxide Nanoparticles in Supercritical Fluids written by Gabriele Aksomaityte and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxide Nanoparticles in Organic Solvents written by Markus Niederberger and published by Springer Science & Business Media. This book was released on 2009-09-17 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles in Organic Solvents discusses recent advances in the chemistry involved for the controlled synthesis and assembly of metal oxide nanoparticles, the characterizations required by such nanoobjects, and their size and shape depending properties. In the last few years, a valuable alternative to the well-known aqueous sol-gel processes was developed in the form of nonaqueous solution routes. Metal Oxide Nanoparticles in Organic Solvents reviews and compares surfactant- and solvent-controlled routes, as well as providing an overview of techniques for the characterization of metal oxide nanoparticles, crystallization pathways, the physical properties of metal oxide nanoparticles, their applications in diverse fields of technology, and their assembly into larger nano- and mesostructures. Researchers and postgraduates in the fields of nanomaterials and sol-gel chemistry will appreciate this book’s informative approach to chemical formation mechanisms in relation to metal oxides.
Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques Presents key applications, including biomedical, energy, electronic and environmental Discusses the most relevant techniques for synthesis, patterning and characterization
Download or read book Design of Metal oxide Nanoparticles with the Continuous Hydrothermal Synthesis CHTS written by Christian Schüßler and published by . This book was released on 2023* with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxide Nanocomposites written by B. Raneesh and published by John Wiley & Sons. This book was released on 2021-02-17 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanocomposites: Synthesis and Applications summarizes many of the recent research accomplishments in the area of metal oxide-based nanocomposites. This book focussing on the following topics: Nanocomposites preparation and characterization of metal oxide nanocomposites; synthesis of core/shell metal oxide nanocomposites; multilayer thin films; sequential assembly of nanocomposite materials; semiconducting polymer metal oxide nanocomposites; graphene-based metal and metal oxide nanocomposites; carbon nanotube–metal–oxide nanocomposites; silicon mixed oxide nanocomposites; gas semiconducting sensors based on metal oxide nanocomposites; metal ]organic framework nanocomposite for hydrogen production and nanocomposites application towards photovoltaic and photocatalytic.
Download or read book Production of Metal Oxide and Composite Metal Oxide Nanoparticles Using Supercritical Water written by Raghu Viswanathan and published by . This book was released on 2003 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxide Nanostructures Chemistry written by Jean-Pierre Jolivet and published by Oxford University Press, USA. This book was released on 2019-02 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This much-anticipated new edition of Jolivet's work builds on the edition published in 2000. It is entirely updated, restructured and increased in content. The book focuses on the formation by techniques of green chemistry of oxide nanoparticles having a technological interest. Jolivet introduces the most recent concepts and modelings such as dynamics of particle growth, ordered aggregation, ionic and electronic interfacial transfers. A general view of the metal hydroxides, oxy-hydroxides and oxides through the periodic table is given, highlighting the influence of the synthesis conditions on crystalline structure, size and morphology of nanoparticles. The formation of aluminum, iron, titanium, manganese and zirconium oxides are specifically studied. These nanomaterials have a special interest in many technological fields such as ceramic powders, catalysis and photocatalysis, colored pigments, polymers, cosmetics and also in some biological or environmental phenomena.
Download or read book Iron Oxide Nanoparticles for Biomedical Applications written by Sophie Laurent and published by Elsevier. This book was released on 2017-10-20 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Iron Oxide Nanoparticles for Biomedical Applications: Synthesis, Functionalization and Application begins with several chapters covering the synthesis, stabilization, physico-chemical characterization and functionalization of iron oxide nanoparticles. The second part of the book outlines the various biomedical imaging applications that currently take advantage of the magnetic properties of iron oxide nanoparticles. Brief attention is given to potential iron oxide based therapies, while the final chapter covers nanocytotoxicity, which is a key concern wherever exposure to nanomaterials might occur. This comprehensive book is an essential reference for all those academics and professionals who require thorough knowledge of recent and future developments in the role of iron oxide nanoparticles in biomedicine. - Unlocks the potential of iron oxide nanoparticles to transform diagnostic imaging techniques - Contains full coverage of new developments and recent research, making this essential reading for researchers and engineers alike - Explains the synthesis, processing and characterization of iron oxide nanoparticles with a view to their use in biomedicine
Download or read book Synthesis Properties and Applications of Oxide Nanomaterials written by José A. Rodriguez and published by John Wiley & Sons. This book was released on 2007-03-30 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current oxide nanomaterials knowledge to draw from and build on Synthesis, Properties, and Applications of Oxide Nanomaterials summarizes the existing knowledge in oxide-based materials research. It gives researchers one comprehensive resource that consolidates general theoretical knowledge alongside practical applications. Organized by topic for easy access, this reference: * Covers the fundamental science, synthesis, characterization, physicochemical properties, and applications of oxide nanomaterials * Explains the fundamental aspects (quantum-mechanical and thermodynamic) that determine the behavior and growth mode of nanostructured oxides * Examines synthetic procedures using top-down and bottom-up fabrication technologies involving liquid-solid or gas-solid transformations * Discusses the sophisticated experimental techniques and state-of-the-art theory used to characterize the structural and electronic properties of nanostructured oxides * Describes applications such as sorbents, sensors, ceramic materials, electrochemical and photochemical devices, and catalysts for reducing environmental pollution, transforming hydrocarbons, and producing hydrogen With its combination of theory and real-world applications plus extensive bibliographic references, Synthesis, Properties, and Applications of Oxide Nanomaterials consolidates a wealth of current, complex information in one volume for practicing chemists, physicists, and materials scientists, and for engineers and researchers in government, industry, and academia. It's also an outstanding reference for graduate students in chemistry, chemical engineering, physics, and materials science.
Download or read book Synthesis of the Oxide and Metal oxide Nanoparticles by the Ultrasonic Spray Pyrolysis written by Jelena Bogovic and published by . This book was released on 2014 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Continuous Hydrothermal Flow Synthesis of Optimised Transparent Conducting Oxide Nanoparticles and Thin Films written by Douglas P. Howard and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
