Download or read book National Seminar on Performance Enhancement of Cements and Concretes by Use of Flyash Slag Silica Fume and Chemical Admixtures New Delhi 15 17 January 1998 written by and published by . This book was released on 1998 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sixth NCB International Seminar on Cement and Building Materials New Delhi 24 27 November 1998 written by and published by . This book was released on 1998 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Building Materials in India 50 Years written by T. N. Gupta and published by Building Materials & Technology Promotion. This book was released on 1998 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents A Vivid Account Of The Progress And Development Achieved In The Area Of Building Materials Over The Past Five Decades. Covers Emerging Trends And Latests Developments In The Use Of Wastes And Admixtures In Cement And Concrete, Wood Subsititute Materials, Recycling Of Wates And Composite Materials Along With The Response Of New Materials To Fire, And Long Term Performance And Durability.
Download or read book The Use of Limestone in Portland Cement written by Rachel Jean Detwiler and published by . This book was released on 1996 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Waste and Supplementary Cementitious Materials in Concrete written by Rafat Siddique and published by Woodhead Publishing. This book was released on 2018-06-05 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste and Supplementary Cementitious Materials in Concrete: Characterisation, Properties and Applications provides a state-of-the-art review of the effective and efficient use of these materials in construction. Chapters focus on a specific type of material, addressing their characterization, strength, durability and structural applications. Sections include discussions of the properties of materials, including their physical, chemical and characterization, their strength and durability, modern engineering applications, case studies, the state of codes and standards of implementation, cost considerations, and the role of materials in green and sustainable construction. The book concludes with a discussion of research needs. - Focuses on material properties and applications (as well as 'sustainability' aspects) of cementitious materials - Assembles leading researchers from diverse areas of study - Ideas for use as a 'one stop' reference for advanced postgraduate courses focusing on sustainable construction materials
Download or read book High Performance Concrete written by Pierre-Claude Aïtcin and published by CRC Press. This book was released on 1998-07-02 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete review of the fast-developing topic of high performance concrete (HPC) by one of the leading researchers in the field. It covers all aspects of HPC from materials, properties and technology, to construction and testing. The book will be valuable for all concrete technologists and construction engineers wishing to take advantage of the re
Download or read book Cement Replacement Materials written by Ali Akbar Ramezanianpour and published by Springer Science & Business Media. This book was released on 2013-09-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present the latest findings in the properties and application of Supplementary Cementing Materials and blended cements currently used in the world in concrete. Sustainability is an important issue all over the world. Carbon dioxide emission has been a serious problem in the world due to the greenhouse effect. Today many countries agreed to reduce the emission of CO2. Many phases of cement and concrete technology can affect sustainability. Cement and concrete industry is responsible for the production of 7% carbon dioxide of the total world CO2 emission. The use of supplementary cementing materials (SCM), design of concrete mixtures with optimum content of cement and enhancement of concrete durability are the main issues towards sustainability in concrete industry.
Download or read book Cement Production Technology written by Anjan Kumar Chatterjee and published by CRC Press. This book was released on 2018-04-27 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an outcome of the author’s active professional involvement in research, manufacture and consultancy in the field of cement chemistry and process engineering. This multidisciplinary title on cement production technology covers the entire process spectrum of cement production, starting from extraction and winning of natural raw materials to the finished products including the environmental impacts and research trends. The book has an overtone of practice supported by the back-up principles.
Download or read book Advances in Structural Engineering written by Vasant Matsagar and published by Springer. This book was released on 2014-12-12 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents research papers presented by academicians, researchers, and practicing structural engineers from India and abroad in the recently held Structural Engineering Convention (SEC) 2014 at Indian Institute of Technology Delhi during 22 – 24 December 2014. The book is divided into three volumes and encompasses multidisciplinary areas within structural engineering, such as earthquake engineering and structural dynamics, structural mechanics, finite element methods, structural vibration control, advanced cementitious and composite materials, bridge engineering, and soil-structure interaction. Advances in Structural Engineering is a useful reference material for structural engineering fraternity including undergraduate and postgraduate students, academicians, researchers and practicing engineers.
Download or read book Advanced Concrete Technology written by Zongjin Li and published by John Wiley & Sons. This book was released on 2011-01-11 with total page 698 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past two decades concrete has enjoyed a renewed level of research and testing, resulting in the development of many new types of concrete. Through the use of various additives, production techniques and chemical processes, there is now a great degree of control over the properties of specific concretes for a wide range of applications. New theories, models and testing techniques have also been developed to push the envelope of concrete as a building material. There is no current textbook which brings all of these advancements together in a single volume. This book aims to bridge the gap between the traditional concrete technologies and the emerging state-of-the-art technologies which are gaining wider use.
Download or read book Use of Fly Ash in Concrete written by and published by . This book was released on 1989 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Supplementary Cementing Materials written by Rafat Siddique and published by Springer Science & Business Media. This book was released on 2011-03-28 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an attempt to consolidate the published research related to the use of Supplementary Cementing Materials in cement and concrete. It comprises of five chapters. Each chapter is devoted to a particular supplementing cementing material. It is based on the literature/research findings published in journals/conference proceeding, etc. Topics covered in the book are; coal fly ash, silica fume (SF), granulated blast furnace slag (GGBS), metakaolin (MK), and rice husk ash (RHA). Each chapter contains introduction, properties of the waste material/by-product, its potential usage, and its effect on the properties of fresh and hardened concrete and other cement based materials.
Download or read book Proceedings of the International Workshop on Sustainable Development and Concrete Technology Beijing China May 20 21 2004 written by Kejin Wang and published by Center for Transportation Research and Education Iowa State University. This book was released on 2004 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Condensed Silica Fume in Concrete written by and published by Thomas Telford. This book was released on 1988 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides a comprehensive review of the properties of concrete containing condensed silica fume(CSF) at each stage of hardening, emphasizing the improvements gained in durability.
Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.
Download or read book Failure Distress and Repair of Concrete Structures written by Norb Delatte and published by Elsevier. This book was released on 2009-10-26 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding and recognising failure mechanisms in concrete is a fundamental pre-requisite to determining the type of repair, or whether a repair is feasible. This title provides a review of concrete deterioration and damage, as well as looking at the problem of defects in concrete. It also discusses condition assessment and repair techniques.Part one discusses failure mechanisms in concrete and covers topics such as causes and mechanisms of deterioration in reinforced concrete, types of damage in concrete structures, types and causes of cracking and condition assessment of concrete structures. Part two reviews the repair of concrete structures with coverage of themes such as standards and guidelines for repairing concrete structures, methods of crack repair, repair materials, bonded concrete overlays, repairing and retrofitting concrete structures with fiber-reinforced polymers, patching deteriorated concrete structures and durability of repaired concrete.With its distinguished editor and international team of contributors, Failure and repair of concrete structures is a standard reference for civil engineers, architects and anyone working in the construction sector, as well as those concerned with ensuring the safety of concrete structures. - Provides a review of concrete deterioration and damage - Discusses condition assessment and repair techniques, standards and guidelines
Download or read book Materials for Civil and Construction Engineers Pearson New International Edition written by Michael S. Mamlouk and published by Pearson Higher Ed. This book was released on 2013-08-27 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Civil Engineering Materials, Construction Materials, and Construction Methods and Materials offered in Civil, Environmental, or Construction engineering departments. This introduction gives students a basic understanding of the material selection process and the behavior of materials — a fundamental requirement for all civil and construction engineers performing design, construction, and maintenance. The authors cover the various materials used by civil and construction engineers in one useful reference, limiting the vast amount of information available to the introductory level, concentrating on current practices, and extracting information that is relevant to the general education of civil and construction engineers. A large number of experiments, figures, sample problems, test methods, and homework problems gives students opportunity for practice and review.
