Download or read book Nanotechnology General 222nd ECS Meeting PRiME 2012 written by and published by . This book was released on 2013 with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology General 214th ECS Meeting PRiME 2008 written by E. Traversa and published by The Electrochemical Society. This book was released on 2009-03 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this issue of ECS Transactions were originally presented in the symposium ¿Nanotechnology General Session¿, held during the PRiME 2008 joint international meeting of The Electrochemical Society and The Electrochemical Society of Japan, with the technical cosponsorship of the Japan Society of Applied Physics, the Korean Electrochemical Society, the Electrochemistry Division of the Royal Australian Chemical Institute, and the Chinese Society of Electrochemistry. This meeting was held in Honolulu, Hawaii, from October 12 to 17, 2008.

Download or read book Nanotechnology General 226th ECS Meeting written by O. M. Leonte and published by The Electrochemical Society. This book was released on 2015-04-30 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology general written by C. Brock and published by . This book was released on 2010 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology general written by O. Leonte and published by . This book was released on 2011 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology general 221st ECS Meeting written by Electrochemical Society (United States). Meeting and published by . This book was released on 2013 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology General 224th ECS Meeting written by and published by . This book was released on 2014 with total page 51 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology general 220th ECS Meeting written by and published by . This book was released on 2012 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology general 219th ECS Meeting written by W. Mustain and published by . This book was released on 2011 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology general written by C. Bock and published by . This book was released on 2010 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanotechnology General 223rd ECS Meeting written by and published by . This book was released on 2013 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Electrolytes for Electrochemical Supercapacitors written by Cheng Zhong and published by CRC Press. This book was released on 2016-04-27 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrolytes for Electrochemical Supercapacitors provides a state-of-the-art overview of the research and development of novel electrolytes and electrolyte configurations and systems to increase the energy density of electrochemical supercapacitors. Comprised of chapters written by leading international scientists active in supercapacitor research

Download or read book Nanotechnology General 225th ECS Meeting written by W. Mustain and published by . This book was released on 2014 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nano Energetic Materials written by Shantanu Bhattacharya and published by Springer. This book was released on 2018-11-09 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest research on the area of nano-energetic materials, their synthesis, fabrication, patterning, application and integration with various MEMS systems and platforms. Keeping in mind the applications for this field in aerospace and defense sectors, the articles in this volume contain contributions by leading researchers in the field, who discuss the current challenges and future perspectives. This volume will be of use to researchers working on various applications of high-energy research.

Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.

Download or read book Biogenic Nano Particles and their Use in Agro ecosystems written by Mansour Ghorbanpour and published by Springer Nature. This book was released on 2020-03-20 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several nano-scale devices have emerged that are capable of analysing plant diseases, nutrient deficiencies and any other ailments that may affect food security in agro-ecosystems. It has been envisioned that smart delivery systems can be developed and utilised for better management of agricultural ecosystems. These systems could exhibit beneficial, multi-functional characteristics, which could be used to assess and also control habitat-imposed stresses to crops. Nanoparticle-mediated smart delivery systems can control the delivery of nutrients or bioactive and/or pesticide molecules in plants. It has been suggested that nano-particles in plants might help determine their nutrient status and could also be used as cures in agro-ecosystems. Further, to enhance soil and crop productivity, nanotechnology has been used to create and deliver nano fertilizers, which can be defined as nano-particles that directly help supply nutrients for plant growth and soil productivity. Nano-particles can be absorbed onto clay networks, leading to improved soil health and more efficient nutrient use by crops. Additionally, fertilizer particles can be coated with nano-particles that facilitate slow and steady release of nutrients, reducing loss of nutrients and enhancing their efficiency in agri-crops. Although the use of nanotechnology in agro-ecosystems is still in its early stages and needs to be developed further, nano-particle-mediated delivery systems are promising solutions for the successful management of agri-ecosystems. In this context, the book offers insights into nanotechnology in agro-ecosystems with reference to biogenic nanoparticles. It highlights the: • occurrence and diversity of Biogenic Nanoparticles • mechanistic approach involved in the synthesis of biogenic nanoparticles • synthesis of nanoparticles using photo-activation, and their fate in the soil ecosystem • potential applications of nanoparticles in agricultural systems • application and biogenic synthesis of gold nanoparticles and their characterization • impact of biogenic nanoparticles on biotic stress to plants • mechanistic approaches involved in the antimicrobial effects and cytotoxicity of biogenic nanoparticles • role of biogenic nanoparticles in plant diseases management • relevance of biological synthesized nanoparticles in the longevity of agricultural crops • design and synthesis of nano-biosensors for monitoring pollutants in water, soil and plant systems • applications of nanotechnology in agriculture with special refer to soil, water and plant sciences A useful resource for postgraduate and research students in the field of plant and agricultural sciences, it is also of interest to researchers working in nano and biotechnology.

Download or read book Micro and Nanomanufacturing Volume II written by Mark J. Jackson and published by Springer. This book was released on 2017-10-28 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive treatment of micro and nanofabrication techniques, and applies established and research laboratory manufacturing techniques to a wide variety of materials. It is a companion volume to “Micro and Nanomanufacturing” (2007) and covers new topics such as aligned nanowire growth, molecular dynamics simulation of nanomaterials, atomic force microscopy for microbial cell surfaces, 3D printing of pharmaceuticals, microvascular coaptation methods, and more. The chapters also cover a wide variety of applications in areas such as surgery, auto components, living cell detection, dentistry, nanoparticles in medicine, and aerospace components. This is an ideal text for professionals working in the field, and for graduate students in micro and nanomanufacturing courses.