Download or read book Nanostructure Fabrication Using Electron Beam Irradiation of Organometallic Compounds written by Thomas Robert Bedson and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electron Beam induced Organometallic Chemical Vapor Deposition for Nanostructure Fabrication written by Hong Jiang and published by . This book was released on 2000 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanofabrication Using Focused Ion and Electron Beams written by Ivo Utke and published by Oxford University Press. This book was released on 2012-05-01 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofabrication Using Focused Ion and Electron Beams presents fundamentals of the interaction of focused ion and electron beams (FIB/FEB) with surfaces, as well as numerous applications of these techniques for nanofabrication involving different materials and devices. The book begins by describing the historical evolution of FIB and FEB systems, applied first for micro- and more recently for nanofabrication and prototyping, practical solutions available in the market for different applications, and current trends in development of tools and their integration in a fast growing field of nanofabrication and nanocharacterization. Limitations of the FIB/FEB techniques, especially important when nanoscale resolution is considered, as well as possible ways to overcome the experimental difficulties in creating new nanodevices and improving resolution of processing, are outlined. Chapters include tutorials describing fundamental aspects of the interaction of beams (FIB/FEB) with surfaces, nanostructures and adsorbed molecules; electron and ion beam chemistries; basic theory, design and configuration of equipment; simulations of processes; basic solutions for nanoprototyping. Emerging technologies as processing by cluster beams are also discussed. In addition, the book considers numerous applications of these techniques (milling, etching, deposition) for nanolithography, nanofabrication and characterization, involving different nanostructured materials and devices. Its main focus is on practical details of using focused ion and electron beams with gas assistance (deposition and etching) and without gas assistance (milling/cutting) for fabrication of devices from the fields of nanoelectronics, nanophotonics, nanomagnetics, functionalized scanning probe tips, nanosensors and other types of NEMS (nanoelectromechanical systems). Special attention is given to strategies designed to overcome limitations of the techniques (e.g., due to damaging produced by energetic ions interacting with matter), particularly those involving multi-step processes and multi-layer materials. Through its thorough demonstration of fundamental concepts and its presentation of a wide range of technologies developed for specific applications, this volume is ideal for researches from many different disciplines, as well as engineers and professors in nanotechnology and nanoscience.
Download or read book Nanostructure Engineering Using Electron Beam Lithography written by Paul Bernard Fischer and published by . This book was released on 1993 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Ph. D. thesis addresses nanostructure fabrication techniques based on electron beam lithography and their application to: the creation of ultra-fast metal-semiconductor-metal photodetectors and quantum effect transistors, the investigation of light emission from silicon, and the enhancement of resolution in magnetic force microscopy. Specifically, this thesis covers the following topics. (1) The implementation and characterization of an ultra-high resolution electron beam lithography (EBL) system created by modifying a scanning electron microscope. (2) The exploration of minimum achievable feature sizes using ultra-high resolution EBL and a lift-off process with polymethyl-methacrylate resists. 10 nm features, which are among the smallest ever achieved using EBL, have been obtained using a double shadow evaporation technique, a ultra-high resolution EBL technique, and a technique utilizing EBL, reactive ion etching, and subsequent wet etching. (3) The application of ultra-high resolution EBL technology to the fabrication of ultra-fast metal-semiconductor-metal (MSM) photodetectors. The fastest response time reported to date has been achieved in this project. (4) The fabrication and characterization of modulation doped field effect transistors. Quantum effects have been observed in a point contact device. (5) The fabrication of sub-50 nm Si structures using EBL, reactive ion etching (RIE) and subsequent wet etching for the study of photoluminescence (PL) from Si. PL has been observed from an array of 20 nm diameter pillars. And finally, (6) the application of high resolution EBL to the study of magnetic materials. Single domain magnetic particles and novel MFM tips have been fabricated.
Download or read book Nanostructure Fabrication by Electron and Ion Beam Patterning of Nanoparticles written by David Sun Kong and published by . This book was released on 2004 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two modes of energetic beam-mediated fabrication have been investigated, namely focused ion beam (FIB) direct-writing of nanoparticles, and a technique for electrostatically patterning ionized inorganic nanoparticles, termed nanoxerography. A FIB has been used to directly pattern thin films of organometallic Ag-precursors down to a resolution of 100 nm. The sensitivity of the resist to 30 keV Ga+ ions was measured to be approximately 5 C/cm2. Using this technique arbitrary structures were fabricated in two and three dimensions with resistivity on the order of 1x10 4 Q-cm and 1x1 0-5 Q-cm for single- and multi-layer structures, respectively. A new unit of merit for characterizing direct-write processes, termed resistivity-dose (Q-jC/cm), has been introduced. A Nanocluster Source capable of generating a beam of charged, inorganic nanoparticles has been characterized. The relationship between power supplied to the magnetron of the source and the size of deposited clusters has been plotted. Techniques for utilizing such clusters to develop latent electrified images patterned by an electron beam (EB) have been proposed. The charge-storing characteristics of a variety of substrates such as mylar and polyimide were studied by developing EB-patterned charge images with toner particles.
Download or read book Radiation Synthesis of Materials and Compounds written by Boris Ildusovich Kharisov and published by CRC Press. This book was released on 2016-04-19 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers and engineers working in nuclear laboratories, nuclear electric plants, and elsewhere in the radiochemical industries need a comprehensive handbook describing all possible radiation-chemistry interactions between irradiation and materials, the preparation of materials under distinct radiation types, the possibility of damage of material
Download or read book Materials Science of Polymers written by A. K. Haghi and published by CRC Press. This book was released on 2015-05-27 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical and technological development demands the creation of new materials that are stronger, more reliable, and more durable-materials with new properties. This book skillfully blends and integrates polymer science, plastic technology, and rubber technology to highlight new developments and trends in advanced polyblends. The fundamentals of pol
Download or read book Advances in Imaging and Electron Physics written by Peter W. Hawkes and published by Elsevier. This book was released on 2011-07-29 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Imaging and Electron Physics merges two long-running serials-Advances in Electronics and Electron Physics and Advances in Optical and Electron Microscopy. This series features extended articles on the physics of electron devices (especially semiconductor devices), particle optics at high and low energies, microlithography, image science and digital image processing, electromagnetic wave propagation, electron microscopy, and the computing methods used in all these domains.
Download or read book Handbook of Less Common Nanostructures written by Boris I. Kharisov and published by CRC Press. This book was released on 2012-03-19 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: As nanotechnology has developed over the last two decades, some nanostructures, such as nanotubes, nanowires, and nanoparticles, have become very popular. However, recent research has led to the discovery of other, less-common nanoforms, which often serve as building blocks for more complex structures. In an effort to organize the field, the Handbook of Less-Common Nanostructures presents an informal classification based mainly on the less-common nanostructures. A small nanotechnological encyclopedia, this book: Describes a range of little-known nanostructures Offers a unifying vision of the synthesis of nanostructures and the generalization of rare nanoforms Includes a CD-ROM with color versions of more than 100 nanostructures Explores the fabrication of rare nanostructures, including modern physical, chemical, and biological synthesis techniques The Handbook of Less-Common Nanostructures discusses a classification system not directly related to the dimensionality and chemical composition of nanostructure-forming compounds or composite. Instead, it is based mainly on the less-common nanostructures. Possessing unusual shapes and high surface areas, these structures are potentially very useful for catalytic, medical, electronic, and many other applications.
Download or read book Nanofabrication Using Electron Beam Lithography written by Arwa Abbas and published by . This book was released on 2013 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis addresses nanostructure fabrication techniques based on electron beam lithography, which is the most widely employed nanofabrication techniques for R & D and for the prototyping or production of photo-mask or imprint mold. The focus is on the study of novel resist and development process, as well as pattern transfer procedure after lithography. Specifically, this thesis investigates the following topics that are related to either electron beam resists, their development, or pattern transfer process after electron beam lithography: (1) The dry thermal development (contrary to conventional solvent development) of negative electron beam resists polystyrene (PS) to achieve reasonably high contrast and resolution. (2) The solvent development for polycarbonate electron beam resist, which is more desirable than the usual hot aqueous solution of NaOH developer, to achieve a low contrast that is ideal for grayscale lithography. (3) The fabrication of metal nanostructure by electron beam lithography and dry liftoff (contrary to the conventional liftoff using a strong solvent or aqueous solution), to achieved down to ~50 nm resolution. (4) The study a novel electron beam resist poly(sodium 4-styrenesulfonate) (sodium PSS) that is water soluble and water developable, to fabricate the feature size down to ~ 40 nm. And finally, (5) The fabrication of gold nanostructure on a thin membrane, which will be used as an object for novel x-ray imaging, where we developed the fabrication process for silicon nitride membrane, electroplating of gold, and pattern transfer after electron beam lithography using single layer resist and tri-layer resist stack.
Download or read book Fabrication of Metal Organic Framework Derived Nanomaterials and Their Electrochemical Applications written by Wei Xia and published by Springer. This book was released on 2018-04-03 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis systematically introduces readers to a new metal-organic framework approach to fabricating nanostructured materials for electrochemical applications. Based on the metal-organic framework (MOF) approach, it also demonstrates the latest ideas on how to create optimal MOF and MOF-derived nanomaterials for electrochemical reactions under controlled conditions. The thesis offers a valuable resource for researchers who want to understand electrochemical reactions at nanoscale and optimize materials from rational design to achieve enhanced electrochemical performance. It also serves as a useful reference guide to fundamental research on advanced electrochemical energy storage materials and the synthesis of nanostructured materials.
Download or read book The Chemistry of Metal CVD written by Toivo T. Kodas and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: High purity, thin metal coatings have a variety of important commercial applications, for example, in the microelectronics industry, as catalysts, as protective and decorative coatings as well as in gas-diffusion barriers. This book offers detailed, up- to-date coverage of the chemistry behind the vapor deposition of different metals from organometallic precursors. In nine chapters, the CVD of metals including aluminum, tungsten, gold, silver, platinum, palladium, nickel, as well as copper from copper(I) and copper(II) compounds is covered. The synthesis and properties of the precursors, the growth process, morphology, quality and adhesion of the resulting films as well as laser- assisted, ion- assisted and plasma-assisted methods are discussed. Present applications and prospects for future developments are summarized. With ca. 1000 references and a glossary, this book is a unique source of in-depth information. It is indispensable for chemists, physicists, engineers and materials scientists working with metal- coating processes and technologies. From Reviews: 'I highly recommend this book to anyone interested in learning more about the chemistry of metal CVD.' J. Am Chem. Soc.
Download or read book From Instrumentation to Nanotechnology written by J.W. Gardner and published by CRC Press. This book was released on 1992-01-30 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressed to physical and chemical scientists and engineers, this book provides information on the design, manufacture, and assessment of components with critical dimensions or critical tolerances in the 0.1-100 nanometer range. Such tiny parts are now used in automobile engines, cassette players, and other common products. The 16 lectures presented are from an advanced vacation school on instrumentation and nanotechnology in Warwick, England, September 1990. Among the topics are signal processing, ultrasonic sensors, and nanoactuators for controlled displacements. .
Download or read book Handbook of Research on Functional Materials written by Charles A. Wilkie and published by CRC Press. This book was released on 2016-04-19 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Research on Functional Materials: Principles, Capabilities and Limitations covers a broad range of modern materials and provides industry professionals and researchers in polymer science and technology with a single, comprehensive book summarizing all aspects involved in the modern materials production chain. The book focuses on industr
Download or read book Functional Nanostructures Fabricated by Focused Electron Ion Beam Induced Deposition written by Rosa Córdoba Castillo and published by Springer. This book was released on 2016-08-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis constitutes a detailed study of functional nanostructures (ferromagnetic, superconducting, metallic and semiconducting) fabricated by focused electron/ion beam induced deposition techniques. The nanostructures were grown using different precursor materials such as Co2(CO)8, Fe2(CO)9, W(CO)6, (CH3)3Pt(CpCH3) and were characterized by a wide range of techniques. This work reports results obtained for the morphology, the microstructure, the composition, the electrical transport mechanism, magnetic and superconducting properties of nanostructures. The results offers exciting prospects in a wide range of applications in nanotechnology and condensed matter physics.
Download or read book JJAP written by and published by . This book was released on 2005 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Interfacial Chemistry written by and published by Elsevier. This book was released on 2018-03-29 with total page 5276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry, Seven Volume Set summarizes current, fundamental knowledge of interfacial chemistry, bringing readers the latest developments in the field. As the chemical and physical properties and processes at solid and liquid interfaces are the scientific basis of so many technologies which enhance our lives and create new opportunities, its important to highlight how these technologies enable the design and optimization of functional materials for heterogeneous and electro-catalysts in food production, pollution control, energy conversion and storage, medical applications requiring biocompatibility, drug delivery, and more. This book provides an interdisciplinary view that lies at the intersection of these fields. Presents fundamental knowledge of interfacial chemistry, surface science and electrochemistry and provides cutting-edge research from academics and practitioners across various fields and global regions
