Download or read book What is What in the Nanoworld written by Victor E. Borisenko and published by John Wiley & Sons. This book was released on 2013-02-21 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third, partly revised and enlarged edition of this introductory reference summarizes the terms and definitions, most important phenomena, and regulations occurring in the physics, chemistry, technology, and application of nanostructures. A representative collection of fundamental terms and definitions from quantum physics and chemistry, special mathematics, organic and inorganic chemistry, solid state physics, material science and technology accompanies recommended secondary sources for an extended study of any given subject. Each of the more than 2,200 entries, from a few sentences to a page in length, interprets the term or definition in question and briefly presents the main features of the phenomena behind it. Additional information in the form of notes ("First described in", "Recognition", "More details in") supplements the entries and gives a historical perspective of the subject with reference to further sources. Ideal for answering questions related to unknown terms and definitions among undergraduate and PhD students studying the physics of low-dimensional structures, nanoelectronics, and nanotechnology.

Download or read book Introduction to Nanoscience and Nanotechnology written by Gabor L. Hornyak and published by CRC Press. This book was released on 2008-12-22 with total page 1791 pages. Available in PDF, EPUB and Kindle. Book excerpt: The maturation of nanotechnology has revealed it to be a unique and distinct discipline rather than a specialization within a larger field. Its textbook cannot afford to be a chemistry, physics, or engineering text focused on nano. It must be an integrated, multidisciplinary, and specifically nano textbook. The archetype of the modern nano textbook

Download or read book Handbook of Nanoscience Engineering and Technology written by William A. Goddard III and published by CRC Press. This book was released on 2018-09-03 with total page 1075 pages. Available in PDF, EPUB and Kindle. Book excerpt: In his 1959 address, "There is Plenty of Room at the Bottom," Richard P. Feynman speculated about manipulating materials atom by atom and challenged the technical community "to find ways of manipulating and controlling things on a small scale." This visionary challenge has now become a reality, with recent advances enabling atomistic-level tailoring and control of materials. Exemplifying Feynman’s vision, Handbook of Nanoscience, Engineering, and Technology, Third Edition continues to explore innovative nanoscience, engineering, and technology areas. Along with updating all chapters, this third edition extends the coverage of emerging nano areas even further. Two entirely new sections on energy and biology cover nanomaterials for energy storage devices, photovoltaics, DNA devices and assembly, digital microfluidic lab-on-a-chip, and much more. This edition also includes new chapters on nanomagnet logic, quantum transport at the nanoscale, terahertz emission from Bloch oscillator systems, molecular logic, electronic optics in graphene, and electromagnetic metamaterials. With contributions from top scientists and researchers from around the globe, this color handbook presents a unified, up-to-date account of the most promising technologies and developments in the nano field. It sets the stage for the next revolution of nanoscale manufacturing—where scalable technologies are used to manufacture large numbers of devices with complex functionalities.

Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2007-03-27 with total page 1924 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major work has established itself as the definitive reference in the nanoscience and nanotechnology area in one volume. In presents nanostructures, micro/nanofabrication, and micro/nanodevices. Special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. Reflecting further developments, the new edition has grown from six to eight parts. The latest information is added to fields such as bionanotechnology, nanorobotics, and NEMS/MEMS reliability. This classic reference book is orchestrated by a highly experienced editor and written by a team of distinguished experts for those learning about the field of nanotechnology.

Download or read book Nanoscience and Nanotechnology Handbook written by H. Panda and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2010-10-02 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology is the engineering of functional systems at the molecular scale. In its original sense, nanotechnology refers to the projected ability to construct items from the bottom up, using techniques and tools being developed today to make complete, high performance products. In this rising world of rapid technological developments, the role of state of art materials & composites is pivotal in frontier applications like aerospace, aviation, automobile, defense, electronics, chemical, biomedical, energy & nuclear sectors etc. with the advent of 21st century & initiation of Nanotechnology the atomic & molecular structures of materials is redefined. This shall result in new smart materials namely nanoparticles, powder, wires, rods, carbon nano tubes & so on. Nanotechnology is very diverse, ranging from novel extensions of conventional device physics, to completely new approaches based upon molecular self-assembly, to developing new materials with dimensions on the nanoscale, even to speculation on whether we can directly control matter on the atomic scale. Potential of nanotechnology to manipulate and program matter with atomic precision has invited the attention of scientists to explore innumerable applications of nanotechnology was an inspiration for the benefit of researchers, academicians and industries associated with this field. The global market for nanotechnology products is worth an estimated compound annual growth rate (CAGR) of 11.1% from 2010 to 2015.The largest segment of the market, made up of nanomaterials, is expected to increase at a 5 year CAGR of 14.7%. This book basically deals with design of protein based nanomachines, metastabilities in nanocrystalline, nanoscale characterization of nanowires, thermopower measurements on nickel nanowires, a nanoporous tio2 electrode, nanoscale in investigation of ultrathin, silicone oxide thermal decomposition, cylindrical nanodot arrays, nanocrystalline silicon films, dispersion of carbon nanotubes, electrical conductivity study of nanocomposite films, magnetic properties of nanospheres, generation spectroscopy of nanoparticle monolayer, au nanoparticles on light emitting polymers, etc. This handbook deals with the technology frontiers, its applications, the current & future challenges etc. This book will be an invaluable resource to all academicians, industrialists, scientists, upcoming entrepreneurs & technocrats.

Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer Science & Business Media. This book was released on 2010-04-23 with total page 1968 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since 2004 and with the 2nd edition in 2006, the Springer Handbook of Nanotechnology has established itself as the definitive reference in the nanoscience and nanotechnology area. It integrates the knowledge from nanofabrication, nanodevices, nanomechanics, Nanotribology, materials science, and reliability engineering in just one volume. Beside the presentation of nanostructures, micro/nanofabrication, and micro/nanodevices, special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. In its 3rd edition, the book grew from 8 to 9 parts now including a part with chapters on biomimetics. More information is added to such fields as bionanotechnology, nanorobotics, and (bio)MEMS/NEMS, bio/nanotribology and bio/nanomechanics. The book is organized by an experienced editor with a universal knowledge and written by an international team of over 150 distinguished experts. It addresses mechanical and electrical engineers, materials scientists, physicists and chemists who work either in the nano area or in a field that is or will be influenced by this new key technology.

Download or read book Polymer Science and Nanotechnology written by Ravin Narain and published by Elsevier. This book was released on 2020-06-16 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Science and Nanotechnology: Fundamentals and Applications brings together the latest advances in polymer science and nanoscience. Sections explain the fundamentals of polymer science, including key aspects and methods in terms of molecular structure, synthesis, characterization, microstructure, phase structure and processing and properties before discussing the materials of particular interest and utility for novel applications, such as hydrogels, natural polymers, smart polymers and polymeric biomaterials. The second part of the book examines essential techniques in nanotechnology, with an emphasis on the utilization of advanced polymeric materials in the context of nanoscience. Throughout the book, chapters are prepared so that materials and products can be geared towards specific applications. Two chapters cover, in detail, major application areas, including fuel and solar cells, tissue engineering, drug and gene delivery, membranes, water treatment and oil recovery. Presents the latest applications of polymers and polymeric nanomaterials, across energy, biomedical, pharmaceutical, and environmental fields Contains detailed coverage of polymer nanocomposites, polymer nanoparticles, and hybrid polymer-metallic nanoparticles Supports an interdisciplinary approach, enabling readers from different disciplines to understand polymer science and nanotechnology and the interface between them

Download or read book Introduction to Nanoscience and Nanotechnology written by Chris Binns and published by John Wiley & Sons. This book was released on 2010-10-19 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Nanoscience and Nanotechnology explains nanotechnology to an audience that does not necessarily have a scientific background. It covers all aspects, including the new areas of biomedical applications and the use of nanotechnology to probe the "quantum vacuum." After discussing the present state of the art in nanotechnology, the book makes estimates of where these technologies are going and what will be possible in the future.

Download or read book Textbook of Nanoscience and Nanotechnology written by B.S. Murty and published by Springer Science & Business Media. This book was released on 2013-12-06 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is meant to serve as a textbook for beginners in the field of nanoscience and nanotechnology. It can also be used as additional reading in this multifaceted area. It covers the entire spectrum of nanoscience and technology: introduction, terminology, historical perspectives of this domain of science, unique and widely differing properties, advances in the various synthesis, consolidation and characterization techniques, applications of nanoscience and technology and emerging materials and technologies.

Download or read book Oxford Handbook of Nanoscience and Technology written by A.V. Narlikar and published by Oxford University Press. This book was released on 2010-02-11 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: These three volumes are intended to shape the field of nanoscience and technology and will serve as an essential point of reference for cutting-edge research in the field.

Download or read book Essentials in Nanoscience and Nanotechnology written by Narendra Kumar and published by John Wiley & Sons. This book was released on 2016-04-11 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes various aspects of nanoscience and nanotechnology. It begins with an introduction to nanoscience and nanotechnology and includes a historical prospective, nanotechnology working in nature, man -made nanomaterial and impact of nanotechnology illustrated with examples. It goes on to describes general synthetic approaches and strategies and also deals with the characterization of nanomaterial using modern tools and techniques to give basic understanding to those interested in learning this emerging area. It then deals with different kinds of nanomaterial such as inorganics, carbon based-, nanocomposites and self-assembled/supramolecular nano structures in terms of their varieties, synthesis, properties etc. In addition, it contains chapters devoted to unique properties with mathematical treatment wherever applicable and the novel applications dealing with information technology, pollution control (environment, water), energy, nanomedicine, healthcare, consumer goods etc.

Download or read book Fundamentals of Nanotechnology written by Gabor L. Hornyak and published by CRC Press. This book was released on 2018-12-14 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: WINNER 2009 CHOICE AWARD OUTSTANDING ACADEMIC TITLE! Nanotechnology is no longer a subdiscipline of chemistry, engineering, or any other field. It represents the convergence of many fields, and therefore demands a new paradigm for teaching. This textbook is for the next generation of nanotechnologists. It surveys the field’s broad landscape, exploring the physical basics such as nanorheology, nanofluidics, and nanomechanics as well as industrial concerns such as manufacturing, reliability, and safety. The authors then explore the vast range of nanomaterials and systematically outline devices and applications in various industrial sectors. This color text is an ideal companion to Introduction to Nanoscience by the same group of esteemed authors. Both titles are also available as the single volume Introduction to Nanoscience and Nanotechnology Qualifying instructors who purchase either of these volumes (or the combined set) are given online access to a wealth of instructional materials. These include detailed lecture notes, review summaries, slides, exercises, and more. The authors provide enough material for both one- and two-semester courses.

Download or read book Handbook of Nanoscience Engineering and Technology Second Edition written by William A. Goddard III and published by CRC Press. This book was released on 2007-05-03 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to study and manipulate matter at the nanoscale is the defining feature of 21st-century science. The first edition of the standard-setting Handbook of Nanoscience, Engineering, and Technology saw the field through its infancy. Reassembling the preeminent team of leading scientists and researchers from all areas of nanoscience and nanotechnology along with several new pioneers, this second edition will guide the field through its burgeoning adolescence. The phenomenal growth and staggering variety of applications of nanotechnology prevent any reference from providing a complete picture of the field. Instead, this edition surveys the most important areas, the most promising technologies, and the fastest-growing developments of current interest. In particular, it discusses fundamental theory of molecular and nanoelectronics, advanced fabrication technologies, modeling and simulation results, and novel molecular and nanoelectronic devices. New chapters in the Second Edition explore... The story of how the National Nanotechnology Initiative was born, where it is now, and where it is going Molecular computing and processing platforms Spin field effect transistors Moletronics and spintronics Nanoarchitectonics Molecular machines Magnetic manipulation applications in biomedical science Biological- and chemical-mediated self-assembly Nanomanufacturing Nanotextile technologies Nanofluidics for cell biology Carbon nanostructures and nanocomposites Accelerated design tools for nanophotonic devices Nanoparticles for drug delivery Remaining the definitive reference for nano researchers around the world, the Handbook of Nanoscience, Engineering, and Technology, Second Edition provides the signposts for blazers of the nano trail.

Download or read book Handbook of Food Nanotechnology written by Seid Mahdi Jafari and published by Academic Press. This book was released on 2020-06-17 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Nanotechnology: Applications and Approaches is the definitive guide on all aspects of nano-sized ingredients and devices for the food sector. The book brings science and applications together on the nano-scale into nano-structured food materials, with an emphasis on their production, processing, engineering, characterization, and applications of food materials containing true nano-sized dimensions or nano-structures that enable novel/enhanced properties or functions. All chapters emphasize original results relating to experimental, theoretical, computational, and/or applications of nano-materials in food. Topics such as the application of nanotechnology in food processing operations, functional ingredients, quality control, nutraceutical delivery, and packaging of food products are very attractive and beneficial to both academics and practitioners. Finally, the safety of applying nano ingredients and nano devices is covered. Brings novel applications of nanotechnology in processing food products Shows how to improve the formulation of food products with nano-structured ingredients Explores new opportunities in food packaging through nano-structured materials

Download or read book Introduction to Nano written by Amretashis Sengupta and published by Springer. This book was released on 2015-07-01 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the basics of nanotechnology and provides a solid understanding of the subject. Starting from a brush-up of the basic quantum mechanics and materials science, the book helps to gradually build up understanding of the various effects of quantum confinement, optical-electronic properties of nanoparticles and major nanomaterials. The book covers the various physical, chemical and hybrid methods of nanomaterial synthesis and nanofabrication as well as advanced characterization techniques. It includes chapters on the various applications of nanoscience and nanotechnology. It is written in a simple form, making it useful for students of physical and material sciences.

Download or read book Introduction to Nanoscience written by Stuart Lindsay and published by OUP Oxford. This book was released on 2009-10-22 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscience is not physics, chemistry, engineering or biology. It is all of them, and it is time for a text that integrates the disciplines. This is such a text, aimed at advanced undergraduates and beginning graduate students in the sciences. The consequences of smallness and quantum behaviour are well known and described Richard Feynman's visionary essay 'There's Plenty of Room at the Bottom' (which is reproduced in this book). Another, critical, but thus far neglected, aspect of nanoscience is the complexity of nanostructures. Hundreds, thousands or hundreds of thousands of atoms make up systems that are complex enough to show what is fashionably called 'emergent behaviour'. Quite new phenomena arise from rare configurations of the system. Examples are the Kramer's theory of reactions (Chapter 3), the Marcus theory of electron transfer (Chapter 8), and enzyme catalysis, molecular motors, and fluctuations in gene expression and splicing, all covered in the final Chapter on Nanobiology. The book is divided into three parts. Part I (The Basics) is a self-contained introduction to quantum mechanics, statistical mechanics and chemical kinetics, calling on no more than basic college calculus. A conceptual approach and an array of examples and conceptual problems will allow even those without the mathematical tools to grasp much of what is important. Part II (The Tools) covers microscopy, single molecule manipulation and measurement, nanofabrication and self-assembly. Part III (Applications) covers electrons in nanostructures, molecular electronics, nano-materials and nanobiology. Each chapter starts with a survey of the required basics, but ends by making contact with current research literature.

Download or read book Nanophysics and Nanotechnology written by Edward L. Wolf and published by John Wiley & Sons. This book was released on 2015-08-04 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Long awaited new edition of this highly successful textbook, provides once more a unique introduction to the concepts, techniques and applications of nanoscale systems by covering its entire spectrum up to recent findings on graphene.