Download or read book Nanoparticle Reinforced Polymers written by Ana María Díez-Pascual and published by MDPI. This book was released on 2019-07-23 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, a collection of 12 original contributions and 4 reviews, provides a selection of the most recent advances in the preparation, characterization, and applications of polymeric nanocomposites comprising nanoparticles. The concept of nanoparticle-reinforced polymers came about three decades ago, following the outstanding discovery of fullerenes and carbon nanotubes. One of the main ideas behind this approach is to improve the matrix mechanical performance. The nanoparticles exhibit higher specific surface area, surface energy, and density compared to microparticles and, hence, lower nanofiller concentrations are needed to attain properties comparable to, or even better than, those obtained by conventional microfiller loadings, which facilitates processing and minimizes the increase in composite weight. The addition of nanoparticles into different polymer matrices opens up an important research area in the field of composite materials. Moreover, many different types of inorganic nanoparticles, such as quantum dots, metal oxides, and ceramic and metallic nanoparticles, have been incorporated into polymers for their application in a wide range of fields, ranging from medicine to photovoltaics, packaging, and structural applications.
Download or read book Nanoparticle Reinforced Polymers written by Ana Díez-Pascual and published by . This book was released on 2019 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, a collection of 12 original contributions and 4 reviews, provides a selection of the most recent advances in the preparation, characterization, and applications of polymeric nanocomposites comprising nanoparticles. The concept of nanoparticle-reinforced polymers came about three decades ago, following the outstanding discovery of fullerenes and carbon nanotubes. One of the main ideas behind this approach is to improve the matrix mechanical performance. The nanoparticles exhibit higher specific surface area, surface energy, and density compared to microparticles and, hence, lower nanofiller concentrations are needed to attain properties comparable to, or even better than, those obtained by conventional microfiller loadings, which facilitates processing and minimizes the increase in composite weight. The addition of nanoparticles into different polymer matrices opens up an important research area in the field of composite materials. Moreover, many different types of inorganic nanoparticles, such as quantum dots, metal oxides, and ceramic and metallic nanoparticles, have been incorporated into polymers for their application in a wide range of fields, ranging from medicine to photovoltaics, packaging, and structural applications.
Download or read book Nanoparticle Based Polymer Composites written by Sanjay Mavinkere Rangappa and published by Woodhead Publishing. This book was released on 2022-07-15 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoparticle-Based Polymer Composites discusses recent advancements on the synthesis, processing, characterization and applications of this new class of hybrid materials. Chapters cover recycling and lifecycle assessment, with contributions from leading researchers in industry, academics, the government and private research institutes from across the globe. As nanoparticle-based polymer composites are now replacing traditional polymer composites in a broad range of applications such as fuel cells, electronic and biomedical devices, this book presents the latest advancements in the field.Studies have shown that incorporating metal nanoparticles in polymer matrices can improve their mechanical, thermal, electrical and barrier properties. The unique combination of these properties makes this new class of materials suitable for a broad range of different and advanced applications. - Features recent advancements on the synthesis, processing and characterization of nanoparticle-based polymer composites - Discusses recycling and lifecycle assessment - Highly application-orientated, with contributions from leading international researchers in industry, academia, the government and private research institutes
Download or read book Polymer Composites Nanocomposites written by Sabu Thomas and published by John Wiley & Sons. This book was released on 2013-04-16 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer composites are materials in which the matrix polymer isreinforced with organic/inorganic fillers of a definite size andshape, leading to enhanced performance of the resultant composite.These materials find a wide number of applications in such diversefields as geotextiles, building, electronics, medical, packaging,and automobiles. This first systematic reference on the topic emphasizes thecharacteristics and dimension of this reinforcement. The authors are leading researchers in the field from academia,government, industry, as well as private research institutionsacross the globe, and adopt a practical approach here, coveringsuch aspects as the preparation, characterization, properties andtheory of polymer composites. The book begins by discussing the state of the art, new challenges,and opportunities of various polymer composite systems. Interfacialcharacterization of the composites is discussed in detail, as isthe macro- and micromechanics of the composites. Structure-propertyrelationships in various composite systems are explained with thehelp of theoretical models, while processing techniques for variousmacro- to nanocomposite systems and the influence of processingparameters on the properties of the composite are reviewed indetail. The characterization of microstructure, elastic,viscoelastic, static and dynamic mechanical, thermal, tribological,rheological, optical, electrical and barrier properties arehighlighted, as well as their myriad applications. Divided into three volumes: Vol. 1. Macro- and Microcomposites;Vol. 2. Nanocomposites; and Vol. 3. Biocomposites.
Download or read book Nanoparticle Reinforced Composites for Structural Applications written by Hassan Mahfuz and published by Imperial College Press. This book was released on 2011-04-30 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally the subject of nanomaterials and nanoscience belonged to physicists and chemists over the last several decades since the legendary lecture given by Nobel laureate Richard P Feynman (Physics) in 1959, "There's Plenty of Room at the Bottom." However, the idea of nanoparticle reinforced composites or nanocomposites came only about a decade ago after the remarkable discovery of carbon nanotubes and buckyballs. Infusion of these nanoparticles into various polymer matrices and their precursors opened up an important area of research in enhancing the properties of composite materials as we know today. The idea is synonymous with that expressed by Federal Agency such as National Nanotechnology Initiative (NNI) that "advances at the nanoscale will be meaningless if they cannot be interfaced well with the technology at larger material components, systems and architecture to produce usable devices." The development of structural nanocomposites from nanoparticle reinforced polymers addresses that concern precisely to the point. With this thematic idea of research in mind, there has been a flurry of activities within the last few years in US as well as in other countries, especially in the composite materials community to develop nanocomposites purely aiming structural applications. Phenomenal improvement in nanocomposite properties have been reported over a wide range of areas. The idea behind this monograph is to systematically describe the scientific basis of nanoparticle dispersion into various polymers, their interactions at the atomic scale, and their influence on the bulk properties of composite materials. The attempt will be to trace the source of such significant improvement in material properties and capture the momentum of this important area of research in materials science.
Download or read book Nanocomposite Science and Technology written by Pulickel M. Ajayan and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, nanocomposites have captured and held the attention and imagination of scientists and engineers alike. Based on the simple premise that by using a wide range of building blocks with dimensions in the nanosize region, it is possible to design and create new materials with unprecedented flexibility and improvements in their physical properties. This book contains the essence of this emerging technology, the underlying science and motivation behind the design of these structures and the future, particularly from the perspective of applications. It is intended to be a reference handbook for future scientists and hence carries the basic science and the fundamental engineering principles that lead to the fabrication and property evaluation of nanocomposite materials in different areas of materials science and technology.
Download or read book Micromechanics Fracture and Contact Behavior of Nanoparticle Reinforced Polymers written by Ajay Bangalore Harish and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Polymer Nanocomposites written by Fengge Gao and published by Elsevier. This book was released on 2012-10-19 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The addition of nanoparticles to polymer composites has led to a new generation of composite materials with enhanced and novel properties. Advances in polymer nanocomposites reviews the main types of polymer nanocomposites and their applications.Part one reviews types of polymer nanocomposites according to fillers. Processing of carbon nanotube-based nanocomposites, layered double hydroxides (LDHs) and cellulose nanoparticles as functional fillers and reinforcement are discussed, alongside calcium carbonate and metal-polymer nanocomposites. Part two focuses on types of polymer nanocomposites according to matrix polymer, with polyolefin-based, (PVC)-based, nylon-based, (PET)-based and thermoplastic polyurethane (TPU)-based polymer nanocomposites discussed. Soft, gel and biodegradable polymer nanocomposites are also considered. Part three goes on to investigate key applications, including fuel cells, aerospace applications, optical applications, coatings and flame-retardant polymer nanocomposites.With its distinguished editor and international team of expert contributors, Advances in polymer nanocomposites is an essential guide for professionals and academics involved in all aspects of the design, development and application of polymer nanocomposites. - Reviews the main types of polymer nanocomposites and their applications - Discusses processing of carbon nanotube-based nanocomposites, layered double hydroxides (LDHs) and cellulose nanoparticles as functional fillers and reinforcement - Discusses polyolefin-based, (PVC)-based, nylon-based, (PET)-based and thermoplastic polyurethane (TPU)-based polymer nanocomposites
Download or read book Polymer Nanocomposites written by Yiu-Wing Mai and published by Woodhead Publishing. This book was released on 2006-02-28 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer nanocomposites are polymer matrices reinforced with nano-scale fillers. This new class of composite materials has shown enhanced optical, electrical and dielectric properties. This important book begins by examining the characteristics of the main types of polymer nanocomposites and then reviews their diverse applications.Part one focuses on polymer/nanoparticle composites, their synthesis, optical properties and electrical conductivity. Part two describes the electrical, dielectric and thermal behaviour of polymer/nanoplatelet composites, whilst polymer/nanotube composites are the subject of Part three. The processing and industrial applications of these nanocomposite materials are discussed in Part four, including uses in fuel cells, bioimaging and sensors as well as the manufacture and applications of electrospun polymer nanocomposite fibers, nanostructured transition metal oxides, clay nanofiller/epoxy nanocomposites, hybrid epoxy-silica-rubber nanocomposites and other rubber-based nanocomposites.Polymer nanocomposites: physical properties and applications is a valuable reference tool for both the research community and industry professionals wanting to learn about these materials and their applications in such areas as fuel cell, sensor and biomedical technology. - Gives a comprehensive review of polymer nanocomposites and their properties - A standard reference on this area - Written by distinguished editors and a international team of authors
Download or read book Nanoclay Reinforced Polymer Composites written by Mohammad Jawaid and published by Springer. This book was released on 2016-08-12 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume book series that exhaustively reviews the key recent research into nanoclay reinforced polymer composites. This second volume focuses on nanoclay based nanocomposites and bionanocomposites fabrication, characterization and applications. This includes classification of nanoclay, chemical modification and processing techniques of nanocomposites. The book also provides comprehensive information about nanoclay modification and functionalization; modification of nanoclay systems, geological and mineralogical research on clays suitability; bio-nanocomposites based on nanoclays; modelling of mechanical behaviour of halloysite based composites; mechanical and thermal properties of halloysite nanocomposites; the effect of Nanoclays on gas barrier properties of polymers and modified nanocomposites. This book is a valuable reference guide for academics and industrial practitioners alike.
Download or read book Functional and Physical Properties of Polymer Nanocomposites written by Aravind Dasari and published by John Wiley & Sons. This book was released on 2016-03-30 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to extensively cover nanoparticles, this addresses some of the key issues in nanocomposites. Polymer nanocomposites (polymers reinforced with nanoparticles), are of great interest due to their remarkable mechanical, thermal, chemical properties as well as optical, electronic, and magnetic applications Potential applications include automobile body parts, high-barrier packaging materials, flame-retardants, scratch-resistant composites, and biodegradable nanocomposites Combines basic theory as well as advanced and in-depth knowledge of these properties Broad audience includes researchers in Materials Science, Physics, Polymer Chemistry, and Engineering, and those in industry
Download or read book Nanomaterials and Nanocomposites written by B. Sridhar Babu and published by CRC Press. This book was released on 2021-04-06 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials and Nanocomposites: Characterization, Processing, and Applications discusses the most recent research in nanomaterials and nanocomposites for a range of applications as well as modern characterization tools and techniques. It deals with nanocomposites that are dispersed with nanosized particulates and carbon nanotubes in their matrices (polymer, metal, and ceramic). In addition, the work: Describes different nanomaterials, such as metal and metal oxides, clay and POSS, carbon nanotubes, cellulose, and biobased polymers in a structured manner Examines the processing of carbon nanotube-based nanocomposites, layered double hydroxides, and cellulose nanoparticles as functional fillers and reinforcement materials Covers size effect on thermal, mechanical, optical, magnetic, and electrical properties Details machining and joining aspects of nanocomposites Discusses the development of smart nanotextiles (intelligent textiles), self-cleaning glass, sensors, actuators, ferrofluids, and wear-resistant nanocoatings. This book enables an efficient comparison of properties and capabilities of these advanced materials, making it relevant for materials scientists and chemical engineers conducting academic research and industrial R&D into nanomaterial processing and applications.
Download or read book Mechanics of Particle and Fiber Reinforced Polymer Nanocomposites written by Sumit Sharma and published by John Wiley & Sons. This book was released on 2021-03-09 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to model your own problems for predicting the properties of polymer-based composites Mechanics of Particle- and Fiber-Reinforced Polymer Nanocomposites: Nanoscale to Continuum Simulations provides readers with a thorough and up-to-date overview of nano, micro, and continuum approaches for the multiscale modeling of polymer-based composites. Covering nanocomposite development, theoretical models, and common simulation methods, the text includes a variety of case studies and scripting tutorials that enable readers to apply and further develop the supplied simulations. The book describes the foundations of molecular dynamics and continuum mechanics methods, guides readers through the basic steps required for multiscale modeling of any material, and correlates the results between the experimental and theoretical work performed. Focused primarily on nanocomposites, the methods covered in the book are applicable to various other materials such as carbon nanotubes, polymers, metals, and ceramics. Throughout the book, readers are introduced to key topics of relevance to nanocomposite materials and structures—supported by journal articles that discuss recent developments in modeling techniques and in the prediction of mechanical and thermal properties. This timely, highly practical resource: Explains the molecular dynamics (MD) simulation procedure for nanofiber and nanoparticle reinforced polymer composites Compares results of experimental and theoretical results from mechanical models at different length scales Covers different types of fibers and matrix materials that constitute composite materials, including glass, boron, carbon, and Kevlar Reviews models that predict the stiffness of short-fiber composites, including the self-consistent model for finite-length fibers, bounding models, and the Halpin-Tsai equation Describes various molecular modeling methods such as Monte Carlo, Brownian dynamics, dissipative particle dynamics, and lattice Boltzmann methods Highlights the potential of nanocomposites for defense and space applications Perfect for materials scientists, materials engineers, polymer scientists, and mechanical engineers, Mechanics of Particle- and Fiber-Reinforced Polymer Nanocomposites is also a must-have reference for computer simulation scientists seeking to improve their understanding of reinforced polymer nanocomposites.
Download or read book Polymer Nanocomposites written by Giuliana Gorrasi and published by MDPI. This book was released on 2018-11-13 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Polymer Nanocomposites" that was published in Nanomaterials
Download or read book Tribology of Polymeric Nanocomposites written by Klaus Friedrich and published by Butterworth-Heinemann. This book was released on 2013-05-14 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology of Polymeric Nanocomposites provides a comprehensive description of polymeric nanocomposites, both as bulk materials and as thin surface coatings, and provides rare, focused coverage of their tribological behavior and potential use in tribological applications. Providing engineers and designers with the preparation techniques, friction and wear mechanisms, property information and evaluation methodology needed to select the right polymeric nanocomposites for the job, this unique book also includes valuable real-world examples of polymeric nanocomposites in action in tribological applications. - Provides a complete reference to polmer nanocomposite material use in tribology from preparation through to selection and use - Explains the theory through examples of real-world applications, keeping this high-level topic practical and accessible - Includes contributions from more than 20 international tribology experts to offer broad yet detailed coverage of this fast-moving field
Download or read book Polymer Composites with Functionalized Nanoparticles written by Krzysztof Pielichowski and published by Woodhead Publishing. This book was released on 2018-09-22 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Composites with Functional Nanoparticles: Synthesis, Properties, and Applications reviews the latest research in the area of polymer nanocomposites and functionalized nanoparticles, providing an introduction for those new to the field, and supporting further research and development. The book helps researchers and practitioners better understand the key role of nanoparticle functionalization for improving the compatibility of inorganic metallic nanomaterials with organic polymers, and for the fabrication of nanostructured materials with special properties. A range of nanoparticles, such as carbon nanotubes are covered, along with descriptions of the methods of functionalization to support better compatibility with polymer matrices. The book also discusses the various applications of this technology, including uses in electronics and the medical and energy industries. - Summarizes the latest research in functionalized nanoparticles for modification of polymer matrices, providing a valuable platform for further research - Includes functionalization of a range of nanoparticles for incorporation into nanocomposites, including carbon nanotubes, graphene, gold and silver, silica and clay - Provides detailed coverage of application areas, including energy, electronics, biomedical applications, and end-of-life considerations
Download or read book Polymer Nanocomposite Research Advances written by Sabu Thomas and published by Nova Publishers. This book was released on 2008 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book focuses on the preparation, properties, characterisation and applications of polymer nanocomposites. The various manufacturing techniques, analysis of morphology, filler dispersion, and interfacial interactions have been described are detail. In the case of polymer nanocomposites, filler dispersion, intercalation/exfoliation, orientation and filler-matrix interaction are the main parameters that determine the physical, thermal, transport, mechanical and rheological properties of the nanocomposites. In this book the ultimate properties of the nanocomposites have been correlated with the key parameters of filler dispersion and filler-matrix interaction. The use of various sophisticated instrument techniques for the characterisation of these nanocomposites are also reviewed.
