Download or read book Multifunctional Nanostructured Metal Oxides for Energy Harvesting and Storage Devices written by Vijay B. Pawade and published by CRC Press. This book was released on 2020-05-21 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal oxide nanoparticles exhibit potential applications in energy and environmental fields, such as solar cells, fuel cells, hydrogen energy, and energy storage devices. This book covers all points from synthesis, properties, and applications of transition metal oxide nanoparticle materials in energy storage and conversion devices. Aimed at graduate-level students and researchers associated with the energy and environment sector, this book addresses the application of nontoxic and environmentally friendly metal oxide materials for a clean environment and deals with synthesis properties and application metal oxides materials for energy conversion, energy storage, and hydrogen generation.

Download or read book Titanium Dioxide written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2018-06-27 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is currently being used in many industrial products. It provides unique photocatalytic properties for water splitting and purification, bacterial inactivation, and organics degradation. It has also been widely used as the photoanode for dye-sensitized solar cells and coatings for self-cleaning surfaces, biomedical implants, and nanomedicine. This book covers various aspects of titanium dioxide nanomaterials including their unique one-dimensional, two-dimensional, mesoporous, and hierarchical nanostructures and their synthetic methods such as sol-gel, hydrothermal, anodic oxidation, and electrophoretic deposition, as well as its key applications in environmental and energy sectors. Through these 24 chapters written by experts from the international scientific community, readers will have access to a comprehensive overview of the recent research and development findings on the titanium dioxide nanomaterials.

Download or read book Physics Chemistry and Applications of Nanostructures written by Viktor Evgen?evich Borisenko and published by World Scientific. This book was released on 2011 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents invited reviews and original short notes of recent results obtained in studies concerning the fabrication and application of nanostructures, which hold great promise for the new generation of electronic and optoelectronic devices. Governing exciting and relatively new topics such as fast-progressing nanoelectronics and optoelectronics, molecular electronics and spintronics, nanophotonics, nanosensorics and nanobiology as well as nanotechnology and quantum processing of information, this book gives readers a more complete understanding of the practical uses of nanotechnology and nanostructures.

Download or read book Advances in Nanostructured Composites written by Mahmood Aliofkhazraei and published by CRC Press. This book was released on 2019-04-30 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites and nanocomposites are used in cases where long durability and strength of components are required; i.e., where high stress levels, erosion processes and multiphase environments are present, including the parts under collision and impact, the parts under rotating motion and erosion (like excavation drills in oil and gas wells). The first volume of this book aims to provide a guide for fabrication of new nanocomposites mainly based on carbon nanotubes and graphene. The main topics of this volume are: Application of Nano-powders for Formation of Metal Matrix of Composites, Conjugated Polymer Nanocomposites, Biopolymer Nanocomposites, Dental Nanocomposites, Graphene-based Nanocomposites for Electrochemical Energy Storage, Polymer/Filler Composites for Optical Diffuse Reflectors, Synthesis and Applications of LDH-Based Nanocomposites, Rubber—CNT Nanocomposites, Nanocomposite Fibers with Carbon Nanotubes, Fabrications of Graphene Based Nanocomposites for Electrochemical Sensing of Drug Molecules, Recent Advances in Graphene Metal Oxide Based Nanocomposites.

Download or read book Advanced Ceramics for Energy and Environmental Applications written by Akshay Kumar and published by CRC Press. This book was released on 2021-11-25 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Ceramics possess various unique properties and are able to withstand harsh environments. The aim of this book is to cover various aspects of the advanced ceramics like carbides, nitrides and oxides for energy and environment related applications. Advanced ceramics with additional functionality propose significant potential for greater impact in the field of energy and environmental technologies. This book focuses on the nanostructured ceramics synthesis, properties, structure-property relation and application in the area of energy and environment. It covers the high impact work from around 50 leading researchers throughout the world working in this field. This will help metallurgists, biologists, mechanical engineers, ceramicists, material scientists and researchers working in the nanotechnology field with inclusion of every aspect of advanced ceramics for energy and environmental applications.

Download or read book Physics Chemistry And Applications Of Nanostructures Reviews And Short Notes Proceedings Of International Conference Nanomeeting 2011 written by Valerij S Gurin and published by World Scientific. This book was released on 2011-04-08 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents invited reviews and original short notes of recent results obtained in studies concerning the fabrication and application of nanostructures, which hold great promise for the new generation of electronic and optoelectronic devices.Governing exciting and relatively new topics such as fast-progressing nanoelectronics and optoelectronics, molecular electronics and spintronics, nanophotonics, nanosensorics and nanobiology as well as nanotechnology and quantum processing of information, this book gives readers a more complete understanding of the practical uses of nanotechnology and nanostructures.

Download or read book Synthesis characterization and applications of nanomaterials in the field of photocatalysis written by Shamaila Sajjad and published by GRIN Verlag. This book was released on 2011-08-17 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Doctoral Thesis / Dissertation from the year 2011 in the subject Chemistry - Materials Chemistry, East China University of Science and Technology (-), language: English, abstract: Considerable effort has been made to design, fabricate, and manipulate nanostructured materials by innovative approaches. The precise control of nanoscale structures will pave the way not only for elucidating unique size/shape dependent physicochemical properties but also for realizing new applications in science and technology. Nanotechnology offers unprecedented opportunities for improving our daily lives and the environment in which we live. This thesis mainly describes recent progress in the design, fabrication, and modification of nanostructured semiconductor materials for environmental applications. The scope of this thesis covers TiO2, Bi2O3 and BiOCl materials, focusing particularly on TiO2-based nanostructures (e.g., pure, doped, coupled, mesoporous, hierarchically porous, and ordered mesoporous TiO2). Mesoporous titania is of particular interest since this class of materials possesses well-defined porosity and large specific surface areas. For photocatalytic degradation of organics, these desirable properties are anticipated to improve the efficiency. So in the first part of work, I have synthesized the mesoporous titania by using poly ethylene glycol as a template in dilute acetic acid aqueous solution by hydrothermal process and investigated the effect of PEG molecular weights and thermal treatment on the resultant structure and photocatalytic activity. When the molecular weights of PEG vary from 600 to 20,000, the particle sizes of mesoporous-TiO2 structure decrease from 15.1 to 13.3 nm and mean pore sizes increase from 6.9-10.6 nm. The activities of these mesoporous-TiO2 photocatalysts prepared by using PEG are evaluated and compared with Degussa P-25 using chloro-phenol as a testing compound. [...]

Download or read book Nanostructured Piezoelectric Energy Harvesters written by Joe Briscoe and published by Springer. This book was released on 2014-08-25 with total page 65 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a range of devices that use piezoelectricity to convert mechanical deformation into electrical energy and relates their output capabilities to a range of potential applications. Starting with a description of the fundamental principles and properties of piezo- and ferroelectric materials, where applications of bulk materials are well established, the book shows how nanostructures of these materials are being developed for energy harvesting applications. The authors show how a nanostructured device can be produced, and put in context some of the approaches that are being investigated for the development of nanostructured piezoelectric energy harvesting devices, also known as nanogenerators. There is growing interest in strategies for energy harvesting that use a variety of existing and well-known materials in new morphologies or architectures. A key change of morphology to enable new functionality is the nanostructuring of a material. One area of particular interest is self-powered devices based on portable energy harvesting. The charging of personal electronic equipment and other small-scale electronic devices such as sensors is a highly demanding environment that requires innovative solutions. The output of these so-called nanogenerators is explained in terms of the requirements for self-powered applications. The authors summarise the range of production methods used for nanostructured devices, which require much lower energy inputs than those used for bulk systems, making them more environmentally friendly and also compatible with a wide range of substrate materials.

Download or read book Nanostructured Photocatalysts written by Van-Huy Nguyen and published by Elsevier. This book was released on 2021-06-25 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Photocatalysts: From Fundamental to Practical Applications offers a good opportunity for academic, industrial researchers and engineers to gain insights on the fundamental principles and updated knowledge on the engineering aspects and various practical applications of photocatalysis. This book comprehensively and systematically reviews photocatalytic fundamental aspects, ranging from reaction mechanism, kinetic modeling, nanocatalyst synthesis and design, essential material characterization using advanced techniques, and novel reactor design and scale-up. Future perspectives, techno-economical evaluation and lifecycle assessment of photocatalytic processes are also provided. Finally, a wide range of practical, important and emerging photocatalytic applications, namely wastewater treatment, air pollution remediation, renewable and green energy generation, and vital chemical production are thoroughly covered, making this book useful and beneficial for engineers, scientists, academic researchers, undergraduates and postgraduates. - Provides a fundamental understanding of photocatalysis - Covers all aspects of recent developments in photocatalytic processes and photocatalytic materials - Focuses on advanced photocatalytic applications and future research advancements on energy, environment, biomedical, and other specialty fields - Contains contributions from leading international experts in photocatalysis - Presents a valuable reference for academic and industrial researchers, scientists and engineers

Download or read book Atomic Layer Deposition in Energy Conversion Applications written by Julien Bachmann and published by John Wiley & Sons. This book was released on 2017-03-15 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining the two topics for the first time, this book begins with an introduction to the recent challenges in energy conversion devices from a materials preparation perspective and how they can be overcome by using atomic layer deposition (ALD). By bridging these subjects it helps ALD specialists to understand the requirements within the energy conversion field, and researchers in energy conversion to become acquainted with the opportunities offered by ALD. With its main focus on applications of ALD for photovoltaics, electrochemical energy storage, and photo- and electrochemical devices, this is important reading for materials scientists, surface chemists, electrochemists, electrotechnicians, physicists, and those working in the semiconductor industry.

Download or read book Nanotechnology Toward the Sustainocene written by Thomas Alured Faunce and published by CRC Press. This book was released on 2014-12-02 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the sustainability of our world is being endangered or destroyed by the misguided activities of artificial human entities, real people have begun to expand their moral sympathies sufficiently to prioritize protecting our world's interests. They have developed a new technology-nanotechnology-that has the potential to advance human society towa

Download or read book Recent Advances in Energy Harvesting Technologies written by Shailendra Rajput and published by CRC Press. This book was released on 2023-10-26 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy demand is continuously rising, mainly due to population growth and rapid economic development. There are substantial worries about the environmental effects of fossil fuels in addition to the uncertainties surrounding the long-term sustainability of non-renewable energy sources. Environmental safety concerns are driving an increase in the demand for renewable energy production. Numerous efforts have been paid to harvest energy from ambient sources, e.g. solar, wind, thermal, hydro, mechanical, etc. This book discusses the application of artificial intelligence (AI) for energy harvesting. The implementation of metaheuristics and AL algorithms in the field of energy harvesting system will provide a quick start for the researchers and engineers who are new to this area. Energy harvesting technologies are growing very speedily, hence it is necessary to summarize recent advances in energy harvesting methodology. Over the recent years, a considerable amount of effort has been devoted, both in industry and academia, towards the performance modelling and evaluation of energy harvesting technologies. This book is the result of a collaborative effort among different researchers in the fields of energy harvesting and artificial intelligence. Technical topics discussed in the book include: Hybrid algorithms Mechanical to electrical energy conversion Swarm intelligence MPPT technologies Polymer nanocomposites

Download or read book Nanomaterials for Energy Applications written by L. Syam Sundar and published by CRC Press. This book was released on 2023-12-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanomaterials for Energy Applications provides readers with an in-depth understanding of advanced nanomaterials and their applications in energy generation and utilization concepts. It focuses on emerging nanomaterials and applications in various energy-related fields. Describes nanomaterials for use in photovoltaic cells, solid state lighting, fuel cells, electrochemical batteries, electrochemical capacitors, superconductors, hydrogen storage, and photocatalysts. Focuses on commercial and economic aspects. Includes case studies drawn from practical research. This book is aimed at researchers, advanced students, and practicing engineers in the disciplines of materials, mechanical, electrical, and related fields of engineering.

Download or read book Two Dimensional Nanostructures for Energy Related Applications written by Kuan Yew Cheong and published by CRC Press. This book was released on 2017-03-27 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited book focuses on the latest advances and development of utilizing two-dimensional nanostructures for energy and its related applications. Traditionally, the geometry of this material refers to "thin film" or "coating." The book covers three main parts, beginning with synthesis, processing, and property of two-dimensional nanostructures for active and passive layers followed by topics on characterization of the materials. It concludes with topics relating to utilization of the materials for usage in devises for energy and its related applications.

Download or read book Nanostructured Semiconductors written by Serge Zhuiykov and published by Woodhead Publishing. This book was released on 2018-01-02 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured Semiconductors focuses on the development of semiconductor nanocrystals, their technologies and applications, including energy harvesting, solar cells, solid oxide fuel cells, and chemical sensors. Semiconductor oxides are used in electronics, optics, catalysts, sensors, and other functional devices. In their 2D form, the reduction in size confers exceptional properties, useful for creating faster electronics and more efficient catalysts. Since the first edition of the book, there has been significant progress in the development of new functional nanomaterials with unique and sometimes unpredictable quantum-confined properties within the class what it called two-dimensional (2D) semiconductors. These nanocrystals represent extremely thin nano-structures with thickness of just few nano-meters. Since that time, not only were 2D semiconductor oxides further developed, more importantly, 2D metal dichalcogenides, such as MoS2, MoSe2, WS2, WSe2 and others also progressed significantly in their development demonstrating their superior properties compared to their bulk and microstructural counterparts. The book has been expanded to include these advancements. The book begins with the structure and properties of semiconductor nanocrystals (chapter 1), addresses electronic device applications (chapter 2), discusses 2-Dimensional oxides and dichalcogenide semiconductors (chapters 3 through 5), and ends with energy, environment, and bio applications (chapters 6 through 8). - Focuses on the development of semiconductor nanocrystals and their technologies and applications, including energy harvesting, solar cells, solid oxide fuel cells and chemical sensors - Include other 2D materials, such as dichalcogenides to present a comprehensive resource on the latest advancements in nanostructured semiconductors - Reviews the fundamental physics of conductivity and electron arrangement before proceeding to practical applications - Contains a unique chapter dedicated to the new atomic layer deposition (ALD) technique which has the ability to develop 2D nanostructures with great precision

Download or read book Nanostructured Titanium Dioxide in Photocatalysis written by It-Meng Low and published by CRC Press. This book was released on 2021-06-18 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide (TiO2) has drawn considerable attention as an attractive inorganic raw material for various applications due to its inexpensiveness, nontoxic nature, stability, and excellent photocatalytic activity. Photocatalysis is one of the most promising route for sustainable chemistry of the 21st century. It can contribute to solving environmental, global energy, and chemical problems, as well as to the sustainable production of commodities in the near future. This book presents the fundamentals of photocatalysis in nanostructured TiO2 and describes the factors affecting the photocatalytic activity, design, and synthesis of various forms of nanostructured TiO2. It highlights the use of ion-doping and inert-atmosphere annealing to extend the light-absorption range of photocatalysts and reduce recombination between electrons and holes. It discusses numerous applications in the fields of energy and environment, such as water purification, gas sensing, storage and delivery, and energy generation. The book is an invaluable resource and useful guide for a broad readership in various fields of catalysis, materials science, environment, and energy.

Download or read book Handbook on Synthesis Strategies for Advanced Materials written by A. K. Tyagi and published by Springer Nature. This book was released on 2022-01-04 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art coverage of synthesis of advanced functional materials. Unconventional synthetic routes play an important role in the synthesis of advanced materials as many new materials are metastable and cannot be synthesized by conventional methods. This book presents various synthesis methods such as conventional solid-state method, combustion method, a range of soft chemical methods, template synthesis, molecular precursor method, microwave synthesis, sono-chemical method and high-pressure synthesis. It provides a comprehensive overview of synthesis methods and covers a variety of materials, including ceramics, films, glass, carbon-based, and metallic materials. Many techniques for processing and surface functionalization are also discussed. Several engineering aspects of materials synthesis are also included. The contents of this book are useful for researchers and professionals working in the areas of materials and chemistry.