Download or read book NalcoChampion Fuel Field Manual Third Edition written by Kim B. Peyton and published by McGraw Hill Professional. This book was released on 2016-10-06 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Up-to-date strategies for tackling real-world fuel-related problems This fully revised guide shows, step-by-step, how to effectively solve fuel problems you might face in the field. Written by leading petroleum expert Kim B. Peyton, Nalco Champion Fuel Field Manual, 3rd Edition, covers the entire range of problems encountered during the refining, storage, transportation, delivery, and combustion processes. You will get the latest testing, troubleshooting, and problem solving techniques, as well as concise hazard information and detailed safety procedures. The book offers quick answers to difficult questions, taking you easily from problem to solution. Inside, you’ll find: • Crude oil and common hydrocarbon fuel properties • Identifying and solving specific fuel problems • Sources of fuel production problems • Physical and chemical measurements • Solving fuel problems using chemical additives • Start-to-finish testing methods • Fuel and fuel additive storage and injection systems • Safe shipping and hazard information • Fuel performance property and deposit analysis • Synthetic and alternative fuels
Download or read book Ondeo Nalco Fuel Field Manual written by Kim B. Peyton and published by McGraw Hill Professional. This book was released on 2002 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE ONE-STOP GUIDE TO SOLVING FUEL PERFORMANCE PROBLEMS--REVISED AND UPDATED TO MEET TODAY'S CHALLENGES! Here is all you need to solve practically every fuel problem you might face out in the field! Concise, comprehensive, and compact, this guide covers the entire range of fuel performance problems encountered during testing, storage, transportation, delivery, and combustion. Using a hands-on, practical approach and actual field examples to demonstrate concepts, leading petroleum industry expert Kim B. Peyton takes you step-by-step through: * Effective troubleshooting tactics * Test methods and test results * The most common sources of fuel problems * Chemical additive problems * Safetyand hazard management A unique roundup chapter draws together hard-to-find information on chemical storage tanks, fuel filters, flowmeters, metals, plastics, and more. This revised edition contains valuable new material such as: * Detailed sketches of fuel refining units, fuel pumps, and ASTM testing equipment * Time-saving charts describing fuel specifications * Expanded section on testing methods, to include several new tests that can identify and solve fuel performance problems Invaluable to professionals in every area of the petroleum industry--from refinery engineers to research chemists to technical service personnel and service managers--this resource quickly takes you from problem to resolution, saving you time and money. If you are looking for a one-stop answer book to all your fuel performance problems--the search ends here.
Download or read book Fuel Field Manual written by Kim B. Peyton and published by . This book was released on 1998 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Refinery and petrochemical engineers can turn to this guide for expert information on the sources of and solutions to the full range of fuel performance problems encountered during testing, storage, transportation, delivery, and combustion. Using actual field examples to demonstrate concepts, the book fully covers specific testing and analysis methods, fuel additive problems, safety and hazard guidelines, and trouble shooting techniques. This time- and money-saving resource also features specialized information on chemical storage tanks, fuel filters, flowmeters, metals, plastics, and more.
Download or read book The NALCO Water Handbook Fourth Edition written by Compy Ecolab Company Compy NALCO Water and published by McGraw Hill Professional. This book was released on 2017-11-24 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The Landmark Water Use and Treatment Resource—Fully Updated for Optimizing Water Processes This industry-standard resource from the world’s leading water management company offers practical guidance on the use and treatment of water and wastewater in industrial and institutional facilities. Revised to align with the latest regulations and technologies, The Nalco Water Handbook, Fourth Edition, explains water management fundamentals and clearly shows how to improve water quality, minimize usage, and optimize treatment processes. Throughout, new emphasis is placed on today’s prevailing issues, including water scarcity, stressors, and business risk. Covers all essential water treatment topics, including: • Water management fundamentals • The business case for managing water • Water sources, stressors, and quality • Basic water chemistry • Impurity removal • Steam generation • Cooling water systems • Safety for building water systems • Post-treatment • Energy in water systems • Water applications across various industries
Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control Handy index of chemical substances as well as a general chemical index
Download or read book Local Content Policies in the Oil and Gas Sector written by Silvana Tordo and published by World Bank Publications. This book was released on 2013-07-22 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: A number of countries have recently discovered and are developing oil and gas reserves. Policy makers in such countries are anxious to obtain the greatest benefits for their economies from the extraction of these exhaustible resources by designing appropriate policies to achieve desired goals. One important theme of such policies is the so-called local content created by the sector—the extent to which the output of the extractive industry sector generates further benefits to the economy beyond the direct contribution of its value-added, through its links to other sectors. While local content policies have the potential to stimulate broad-based economic development, their application in petroleum-rich countries has achieved mixed results. This paper describes the policies and practices meant to foster the development of economic linkages from the petroleum sector, as adopted by a number of petroleum-producing countries both in and outside the Organisation for Economic Co-operation and Development. Examples of policy objectives, implementation tools, and reporting metrics are provided to derive lessons of wider applicability. The paper presents various conclusions for policy makers about the design of local content policies.
Download or read book Applied Leadership Development written by Al Bolea and published by Routledge. This book was released on 2015-08-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended for courses on leadership, practicing managers, consultants, and practitioners, this approachable guide teaches readers about how to become a leader. By blending the real-world insights of business executive Al Bolea with tested research findings provided by leadership scholar Leanne Atwater, it effectively bridges theory and practice to outline powerful leadership behaviors. Based on Bolea’s original "J-Curve" model of leadership, the authors identify and describe nine essential elements for leadership mastery, including skills such as setting direction, creating key proceses, and nurturing behaviors. Each chapter pairs concrete narratives with succinct research synopses to show how to expand the potential of people and organizations. A unique, experiential text, Applied Leadership Development engages students with self-reflection and self-assessment exercises, and encourages them in their own development as future leaders.
Download or read book Oil Field Chemicals written by Johannes Fink and published by Elsevier. This book was released on 2003-08-19 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil field chemicals are gaining increasing importance, as the resources of crude oil are decreasing. An increasing demand of more sophisticated methods in the exploitation of the natural resources emerges for this reason. This book reviews the progress in the area of oil field chemicals and additives of the last decade from a rather chemical view. The material presented is a compilation from the literature by screening critically approximately 20,000 references. The text is ordered according to applications, just in the way how the jobs are emerging in practice. It starts with drilling, goes to productions and ends with oil spill. Several chemicals are used in multiple disciplines, and to those separate chapters are devoted. Two index registers are available, an index of chemical substances and a general index. * Gives an introduction to the chemically orientated petroleum engineer. * Provides the petroleum engineer involved with research and development with a quick reference tool. * Covers interdisciplinary matter, i.e. connects petroleum recovery and handling with chemical aspects.
Download or read book Guidelines for the Seismic Design of Oil and Gas Pipeline Systems written by and published by . This book was released on 1984 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Thermodynamic Tables of the Fluid State written by S. Angus and published by Elsevier. This book was released on 2013-10-22 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Thermodynamic Tables of the Fluid State - 7 Propylene (Propene) is a compilation of internationally agreed values of the equilibrium thermodynamic properties of propylene. This book is composed of three chapters, and begins with the presentation of experimental result of thermodynamic studies compared with the equations used to generate the tables. The succeeding chapter deals with correlating equations for thermodynamic property determination of propylene. The last chapter provides the tabulations of the propylene's thermodynamic properties and constants. This book will prove useful to physical chemists.
Download or read book Crude Oil Fouling written by Francesco Coletti and published by Gulf Professional Publishing. This book was released on 2014-11-20 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: With production from unconventional rigs continuing to escalate and refineries grappling with the challenges of shale and heavier oil feedstocks, petroleum engineers and refinery managers must ensure that equipment used with today’s crude oil is protected from fouling deposits Crude Oil Fouling addresses this overarching challenge for the petroleum community with clear explanations on what causes fouling, current models and new approaches to evaluate and study the formation of deposits, and how today’s models could be applied from lab experiment to onsite field usability for not just the refinery, but for the rig, platform, or pipeline. Crude Oil Fouling is a must-have reference for every petroleum engineer’s library that gives the basic framework needed to analyze, model, and integrate the best fouling strategies and operations for crude oil systems. Defines the most critical variables and events that cause fouling Explains the consequences of fouling and its impact on operations, safety, and economics Provides the technical models available to better predict and eliminate the potential for fouling in any crude system
Download or read book Oilfield Microbiology written by Torben Lund Skovhus and published by CRC Press. This book was released on 2019-03-29 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microorganisms can be both beneficial and harmful to the oil and gas industry and therefore there is an increasing need for the oil industry to characterize, quantify and monitor microbial communities in real time. Oilfield Microbiology offers a fundamental insight into how molecular microbiological methods have enabled researchers in the field to analyze and quantify in situ microbial communities and their activities in response to changing environmental conditions. Such information is fundamental to the oil industry to employ more directed, cost-effective strategies to prevent the major problems associated with deleterious microbial activities (e.g., souring and biocorrosion), as well as to encourage beneficial microbe activity (e.g. oil bioremediation). The aim of the book is to understand how the technological advances in molecular microbiological methods over the last two decades are now being utilized by the oil industry to address the key issues faced by the sector. This book contains a comprehensive collection of chapters written by invited experts in the field from academia and industry and provides a solid foundation of the importance of microbes to the oil and gas industry. It is aimed at microbial ecologists, molecular biologists, operators, engineers, chemists, and academics involved in the sector.
Download or read book Bubbles Drops and Particles in Non Newtonian Fluids written by R.P. Chhabra and published by CRC Press. This book was released on 2006-07-25 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bubbles, Drops, and Particles in Non-Newtonian Fluids, Second Edition continues to provide thorough coverage of the scientific foundations and the latest advances in particle motion in non-Newtonian media. The book demonstrates how dynamic behavior of single particles can yield useful information for modeling transport processes in complex multipha
Download or read book Essentials of Engineering Thermodynamics written by Clement Kleinstreuer and published by McGraw Hill Professional. This book was released on 2021-03-10 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the theories, applications, and core concepts of thermodynamics This hands-on guide lays out the critical thermodynamics concepts, rules, and governing equations for engineering students and professionals. Developed by an experienced academic to reduce information overload in his classroom, Essentials of Engineering Thermodynamics: Principles and Applications reinforces each topic through concept questions and representative problems with detailed, worked-out solutions. Figures and illustrations throughout tie each subject to the real world. You will gain a clear understanding of the laws of thermodynamics that drive our understanding of energy systems and their daily applications. Coverage includes: Basic thermodynamics concepts Energy transfer modes The first law of thermodynamics Macroscale mass and energy balances Transient closed systems Steady open uniform flow devices The second law of thermodynamics The T-s diagram and entropy calculations Exergy or minimizing energy waste Open and closed power cycles Reversed closed cycles
Download or read book Organic Laboratory Techniques written by Ralph J. Fessenden and published by Cengage Learning. This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly effective and practical manual is designed to be used as a supplementary text for the organic chemistry laboratory course - and with virtually any main text - in which experiments are supplied by the instructor or in which the students work independently. Each technique contains a brief theoretical discussion. Steps used in each technique, along with common problems that might arise. These respected and renowned authors include supplemental or related procedures, suggested experiments, and suggested readings for many of the techniques. Additionally, each chapter ends with a set of study problems that primarily stress the practical aspects of each technique, and microscale techniques are included throughout the text, as appropriate. Additional exercises, reference material, and quizzes are available online.
Download or read book Corrosion Under Insulation CUI Guidelines written by Gino De Landtsheer and published by Woodhead Publishing. This book was released on 2020-09-02 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Under Insulation (CUI) Guidelines: Technical Guide for Managing CUI, Third Edition, Volume 55 builds upon the success of the first two editions to provide a fully up-to-date, practical source of information on how to monitor and manage insulated systems. In the first edition of this book published in 2008, the EFC Working Parties WP13 and WP15 engaged together to provide guidelines on managing CUI with contributions from a number of European refining, petrochemical, and offshore companies. The guidelines were intended for use on all plants and installations that contain insulated vessels, piping, and equipment, and cover a risk-based inspection methodology for CUI, inspection techniques, and recommended best practices for mitigating CUI. The guidelines include design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials, and protection guards. Corrosion-under-insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection, or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. Provides revised and updated technical guidance on managing CUI provided by EFC Working Parties 13 and 15 Discusses the standard approach to risk based inspection methodology Presents the argument that CUI is everywhere, and looks at mitigating actions that can be started from the onset Includes a wide array of concepts of corrosion mitigation
Download or read book Amine Unit corrosion in Refineries EFC 46 written by J.D. Harston and published by CRC Press. This book was released on 2007-04-20 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The corrosion of carbon steels in amine units used for gas treatment in refining operations is a major problem for the petrochemical industry. Maximizing amine unit reliability, together with improving throughput, circulation, and treatment capacity, requires more effective ways of measuring and predicting corrosion rates. However, there has been a lack of data on corrosion. This valuable report helps to remedy this lack of information by summarizing findings from over 30 plants. It covers such amine types as Methyl Diethanolamine (MDEA), Diethanolamine (DEA), Monoethanolamine (MEA) and Di-isopropanolamine (DIPA), and makes recommendations on materials and process parameters to maximize amine unit efficiency and reliability.
