Download or read book Multivariable System Identification For Process Control written by Y. Zhu and published by Elsevier. This book was released on 2001-10-08 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems and control theory has experienced significant development in the past few decades. New techniques have emerged which hold enormous potential for industrial applications, and which have therefore also attracted much interest from academic researchers. However, the impact of these developments on the process industries has been limited.The purpose of Multivariable System Identification for Process Control is to bridge the gap between theory and application, and to provide industrial solutions, based on sound scientific theory, to process identification problems. The book is organized in a reader-friendly way, starting with the simplest methods, and then gradually introducing more complex techniques. Thus, the reader is offered clear physical insight without recourse to large amounts of mathematics. Each method is covered in a single chapter or section, and experimental design is explained before any identification algorithms are discussed. The many simulation examples and industrial case studies demonstrate the power and efficiency of process identification, helping to make the theory more applicable. MatlabTM M-files, designed to help the reader to learn identification in a computing environment, are included.
Download or read book Identification and Classical Control of Linear Multivariable Systems written by V. Dhanya Ram and published by Cambridge University Press. This book was released on 2022-10-31 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book trains engineering students to identify multivariable transfer function models and design classical controllers for such systems.
Download or read book System Identification written by Rik Pintelon and published by John Wiley & Sons. This book was released on 2004-04-05 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical Engineering System Identification A Frequency Domain Approach How does one model a linear dynamic system from noisy data? This book presents a general approach to this problem, with both practical examples and theoretical discussions that give the reader a sound understanding of the subject and of the pitfalls that might occur on the road from raw data to validated model. The emphasis is on robust methods that can be used with a minimum of user interaction. Readers in many fields of engineering will gain knowledge about: * Choice of experimental setup and experiment design * Automatic characterization of disturbing noise * Generation of a good plant model * Detection, qualification, and quantification of nonlinear distortions * Identification of continuous- and discrete-time models * Improved model validation tools and from the theoretical side about: * System identification * Interrelations between time- and frequency-domain approaches * Stochastic properties of the estimators * Stochastic analysis System Identification: A Frequency Domain Approach is written for practicing engineers and scientists who do not want to delve into mathematical details of proofs. Also, it is written for researchers who wish to learn more about the theoretical aspects of the proofs. Several of the introductory chapters are suitable for undergraduates. Each chapter begins with an abstract and ends with exercises, and examples are given throughout.
Download or read book Frontiers in Advanced Control Systems written by Ginalber Luiz Serra and published by BoD – Books on Demand. This book was released on 2012-07-25 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book pretends to bring the state-of-art research results on advanced control from both the theoretical and practical perspectives. The fundamental and advanced research results as well as the contributions in terms of the technical evolution of control theory are of particular interest. This book can serve as a bridge between people who are working on the theoretical and practical research on control theory, and facilitate the proposal of development of new control techniques and its applications. In addition, this book presents educational importance to help students and researchers to know the frontiers of the control technology.
Download or read book Process Control written by Jean-Pierre Corriou and published by Springer. This book was released on 2017-08-17 with total page 860 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference book can be read at different levels, making it a powerful source of information. It presents most of the aspects of control that can help anyone to have a synthetic view of control theory and possible applications, especially concerning process engineering.
Download or read book System Identification SYSID 03 written by Paul Van Den Hof and published by Elsevier. This book was released on 2004-06-29 with total page 2080 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of the symposium covers all major aspects of system identification, experimental modelling, signal processing and adaptive control, ranging from theoretical, methodological and scientific developments to a large variety of (engineering) application areas. It is the intention of the organizers to promote SYSID 2003 as a meeting place where scientists and engineers from several research communities can meet to discuss issues related to these areas. Relevant topics for the symposium program include: Identification of linear and multivariable systems, identification of nonlinear systems, including neural networks, identification of hybrid and distributed systems, Identification for control, experimental modelling in process control, vibration and modal analysis, model validation, monitoring and fault detection, signal processing and communication, parameter estimation and inverse modelling, statistical analysis and uncertainty bounding, adaptive control and data-based controller tuning, learning, data mining and Bayesian approaches, sequential Monte Carlo methods, including particle filtering, applications in process control systems, motion control systems, robotics, aerospace systems, bioengineering and medical systems, physical measurement systems, automotive systems, econometrics, transportation and communication systems *Provides the latest research on System Identification *Contains contributions written by experts in the field *Part of the IFAC Proceedings Series which provides a comprehensive overview of the major topics in control engineering.
Download or read book Multivariable Control Systems written by P. Albertos Pérez and published by Springer Science & Business Media. This book was released on 2004 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multivariable Control Systems focuses on control design with continual references to the practical aspects of implementation. While the concepts of multivariable control are justified, the book emphasises the need to maintain student interest and motivation over exhaustive mathematical proof. Tools of analysis and representation are always developed as methods for achieving a final control system design and evaluation. Features: • design implementation laid out using extensive reference to MATLAB®; • combined consideration of systems (plant) and signals (mainly disturbances); • step-by-step approach from the objectives of multivariable control to the solution of complete design problems. Multivariable Control Systems is an ideal text for graduate students or for final-year undergraduates looking for more depth than provided by introductory textbooks. It will also interest the control engineer practising in industry and seeking to implement robust or multivariable control solutions to plant problems.
Download or read book Industrial Process Identification and Control Design written by Tao Liu and published by Springer Science & Business Media. This book was released on 2011-11-16 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Process Identification and Control Design is devoted to advanced identification and control methods for the operation of continuous-time processes both with and without time delay, in industrial and chemical engineering practice. The simple and practical step- or relay-feedback test is employed when applying the proposed identification techniques, which are classified in terms of common industrial process type: open-loop stable; integrating; and unstable, respectively. Correspondingly, control system design and tuning models that follow are presented for single-input-single-output processes. Furthermore, new two-degree-of-freedom control strategies and cascade control system design methods are explored with reference to independently-improving, set-point tracking and load disturbance rejection. Decoupling, multi-loop, and decentralized control techniques for the operation of multiple-input-multiple-output processes are also detailed. Perfect tracking of a desire output trajectory is realized using iterative learning control in uncertain industrial batch processes. All the proposed methods are presented in an easy-to-follow style, illustrated by examples and practical applications. This book will be valuable for researchers in system identification and control theory, and will also be of interest to graduate control students from process, chemical, and electrical engineering backgrounds and to practising control engineers in the process industry.
Download or read book Model Based Process Control written by T.J. McAvoy and published by Elsevier. This book was released on 2014-06-28 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presented at this workshop were mathematical models upon which process control is based and the practical applications of this method of control within industry; case studies include examples from the paper and pulp industry, materials industry and the chemical industry, among others. From these presentations emerged a need for further research and development into process control. Containing 19 papers these Proceedings will be a valuable reference work for all those involved in the designing of continuous production processes for industry and for the end user involved in the practical application of process control within their manufacturing process.
Download or read book Industrial Process Identification written by Ai Hui Tan and published by Springer. This book was released on 2019-01-01 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Process Identification brings together the latest advances in perturbation signal design. It describes the approaches to the design process that are relevant to industries. The authors’ discussion of several software packages (Frequency Domain System Identification Toolbox, prs, GALOIS, multilev_new, and Input-Signal-Creator) will allow readers to understand the different designs in industries and begin designing common classes of signals. The authors include two case studies that provide a balance between the theory and practice of these designs: the identification of a direction-dependent electronic nose system; and the identification of a multivariable cooling system with time-varying delay. Major aspects of signal design such as the formulation of suitable specifications in the face of practical constraints, the classes of designs available, the various objectives necessitating separate treatments when dealing with nonlinear systems, and extension to multi-input scenarios, are discussed. Codes, including some that will produce simulated data, are included to help readers replicate the results described. Industrial Process Identification is a powerful source of information for control engineers working in the process and communications industries seeking guidance on choosing identification software tools for use in practical experiments and case studies. The book will also be of interest to academic researchers and students working in electrical, mechanical and communications engineering and the application of perturbation signal design. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
Download or read book Advanced Process Identification and Control written by Enso Ikonen and published by CRC Press. This book was released on 2001-10-02 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: A presentation of techniques in advanced process modelling, identification, prediction, and parameter estimation for the implementation and analysis of industrial systems. The authors cover applications for the identification of linear and non-linear systems, the design of generalized predictive controllers (GPCs), and the control of multivariable systems.
Download or read book Distributed Model Predictive Control for Plant Wide Systems written by Shaoyuan Li and published by John Wiley & Sons. This book was released on 2016-04-25 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: DISTRIBUTED MODEL PREDICTIVE CONTROL FOR PLANT-WIDE SYSTEMS DISTRIBUTED MODEL PREDICTIVE CONTROL FOR PLANT-WIDE SYSTEMS In this book, experienced researchers gave a thorough explanation of distributed model predictive control (DMPC): its basic concepts, technologies, and implementation in plant-wide systems. Known for its error tolerance, high flexibility, and good dynamic performance, DMPC is a popular topic in the control field and is widely applied in many industries. To efficiently design DMPC systems, readers will be introduced to several categories of coordinated DMPCs, which are suitable for different control requirements, such as network connectivity, error tolerance, performance of entire closed-loop systems, and calculation of speed. Various real-life industrial applications, theoretical results, and algorithms are provided to illustrate key concepts and methods, as well as to provide solutions to optimize the global performance of plant-wide systems. Features system partition methods, coordination strategies, performance analysis, and how to design stabilized DMPC under different coordination strategies. Presents useful theories and technologies that can be used in many different industrial fields, examples include metallurgical processes and high-speed transport. Reflects the authors’ extensive research in the area, providing a wealth of current and contextual information. Distributed Model Predictive Control for Plant-Wide Systems is an excellent resource for researchers in control theory for large-scale industrial processes. Advanced students of DMPC and control engineers will also find this as a comprehensive reference text.
Download or read book Introduction to Process Control written by Jose A. Romagnoli and published by CRC Press. This book was released on 2020-07-14 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Process Control, Third Edition continues to provide a bridge between traditional and modern views of process control by blending conventional topics with a broader perspective of integrated process operation, control, and information systems. Updated and expanded throughout, this third edition addresses issues highly relevant to today’s teaching of process control: Discusses smart manufacturing, new data preprocessing techniques, and machine learning and artificial intelligence concepts that are part of current smart manufacturing decisions Includes extensive references to guide the reader to the resources needed to solve modeling, classification, and monitoring problems Introduces the link between process optimization and process control (optimizing control), including the effect of disturbances on the optimal plant operation, the concepts of steady-state and dynamic back-off as ways to quantify the economic benefits of control, and how to determine an optimal transition policy during a planned production change Incorporates an introduction to the modern architectures of industrial computer control systems with real case studies and applications to pilot-scale operations Analyzes the expanded role of process control in modern manufacturing, including model-centric technologies and integrated control systems Integrates data processing/reconciliation and intelligent monitoring in the overall control system architecture Drawing on the authors’ combined 60 years of teaching experiences, this classroom-tested text is designed for chemical engineering students but is also suitable for industrial practitioners who need to understand key concepts of process control and how to implement them. The text offers a comprehensive pedagogical approach to reinforce learning and presents a concept first followed by an example, allowing students to grasp theoretical concepts in a practical manner and uses the same problem in each chapter, culminating in a complete control design strategy. A vast number of exercises throughout ensure readers are supported in their learning and comprehension. Downloadable MATLAB® toolboxes for process control education as well as the main simulation examples from the book offer a user-friendly software environment for interactively studying the examples in the text. These can be downloaded from the publisher’s website. Solutions manual is available for qualifying professors from the publisher.
Download or read book Errors in Variables Methods in System Identification written by Torsten Söderström and published by Springer. This book was released on 2018-04-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an overview of the different errors-in-variables (EIV) methods that can be used for system identification. Readers will explore the properties of an EIV problem. Such problems play an important role when the purpose is the determination of the physical laws that describe the process, rather than the prediction or control of its future behaviour. EIV problems typically occur when the purpose of the modelling is to get physical insight into a process. Identifiability of the model parameters for EIV problems is a non-trivial issue, and sufficient conditions for identifiability are given. The author covers various modelling aspects which, taken together, can find a solution, including the characterization of noise properties, extension to multivariable systems, and continuous-time models. The book finds solutions that are constituted of methods that are compatible with a set of noisy data, which traditional approaches to solutions, such as (total) least squares, do not find. A number of identification methods for the EIV problem are presented. Each method is accompanied with a detailed analysis based on statistical theory, and the relationship between the different methods is explained. A multitude of methods are covered, including: instrumental variables methods; methods based on bias-compensation; covariance matching methods; and prediction error and maximum-likelihood methods. The book shows how many of the methods can be applied in either the time or the frequency domain and provides special methods adapted to the case of periodic excitation. It concludes with a chapter specifically devoted to practical aspects and user perspectives that will facilitate the transfer of the theoretical material to application in real systems. Errors-in-Variables Methods in System Identification gives readers the possibility of recovering true system dynamics from noisy measurements, while solving over-determined systems of equations, making it suitable for statisticians and mathematicians alike. The book also acts as a reference for researchers and computer engineers because of its detailed exploration of EIV problems.
Download or read book Applied Control Systems Design written by Magdi S. Mahmoud and published by Springer Science & Business Media. This book was released on 2012-04-13 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these exercises use MATLAB® to make computation and visualization more straightforward. Applied Control System Design will be of interest to academic researchers for its comparison of different systems models and their response to different control methods and will assist graduate students in learning the practical necessities of advanced control system design. The consistent reference to real systems coupled with self-learning tools will assist control practitioners who wish to keep up to date with the latest control design ideas.
Download or read book Introduction to Process Control Second Edition written by Jose A. Romagnoli and published by CRC Press. This book was released on 2012-02-14 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Process Control, Second Edition provides a bridge between the traditional view of process control and the current, expanded role by blending conventional topics with a broader perspective of more integrated process operation, control, and information systems. Updating and expanding the content of its predecessor, this second edition addresses issues in today’s teaching of process control. Teaching & Learning Principles Presents a concept first followed by an example, allowing students to grasp theoretical concepts in a practical manner Uses the same problem in each chapter, culminating in a complete control design strategy Includes 50 percent more exercises Content Defines the traditional and expanded roles of process control in modern manufacturing Introduces the link between process optimization and process control (optimizing control), including the effect of disturbances on the optimal plant operation, the concepts of steady-state and dynamic backoff as ways to quantify the economic benefits of control, and how to determine an optimal transition policy during a planned production change Incorporates an introduction to the modern architectures of industrial computer control systems with real case studies and applications to pilot-scale operations Discusses the expanded role of process control in modern manufacturing, including model-centric technologies and integrated control systems Integrates data processing/reconciliation and intelligent monitoring in the overall control system architecture Web Resource The book’s website offers a user-friendly software environment for interactively studying the examples in the text. The site contains the MATLAB® toolboxes for process control education as well as the main simulation examples from the book. Access the site through the authors’ websites at www.pseonline.net and www.chms.ucdavis.edu/research/web/pse/ahmet/ Drawing on the authors’ combined 50 years of teaching experiences, this classroom-tested text is designed for chemical engineering students but is also suitable for industrial practitioners who need to understand key concepts of process control and how to implement them. The authors help readers see how traditional process control has evolved into an integrated operational environment used to run modern manufacturing facilities.
Download or read book Model Predictive Control mit MATLAB und Simulink written by Rainer Dittmar and published by BoD – Books on Demand. This book was released on 2019-12-04 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modellbasierte prädiktive Regelungen dienen der Lösung anspruchsvoller Aufgaben der Mehrgrößenregelung mit Beschränkungen der Stell- und Regelgrößen. Sie werden in der Industrie in vielen Bereichen erfolgreich eingesetzt. Mit der MPC ToolboxTM des Programmsystems MATLAB®/Simulink® steht ein Werkzeug zur Verfügung, das sowohl in der industriellen Praxis als auch an Universitäten und Hochschulen verwendet wird. Das vorliegende Buch gibt eine Übersicht über die Grundideen und Anwendungsvorteile des MPC-Konzepts. Es zeigt, wie mit Hilfe der Toolbox MPC-Regelungen entworfen, eingestellt und simuliert werden können. Ausgewählte Beispiele aus dem Bereich der Verfahrenstechnik demonstrieren mögliche Vorgehensweisen und vertiefen das Verständnis. Das Buch richtet sich an in der Industrie tätige Ingenieure, die MPC-Regelungen planen, entwickeln und betreiben, aber auch an Studierende technischer Fachdisziplinen, die in das Arbeitsgebiet MPC einsteigen wollen. Model Predictive Control (MPC) is used to solve challenging multivariable-constrained control problems. MPC systems are successfully applied in many different branches of industry. The MPC ToolboxTM of MATLAB®/Simulink® provides powerful tools for industrial MPC application, but also for education and research at technical universities. This book gives an overview of the basic ideas and advantages of the MPC concept. It shows how MPC systems can be designed, tuned, and simulated using the MPC Toolbox. Selected process engineering benchmark examples are used to demonstrate typical design approaches and help deepen the understanding of MPC technologies. The book is aimed at engineers in industry interested in the development and application of MPC systems, as well as students of different technical disciplines seeking an introduction into this field.This book gives an overview of the basic ideas and advantages of the MPC concept. It shows how MPC systems can be designed, tuned, and simulated using the MPC Toolbox. Selected process engineering benchmark examples are used to demonstrate typical design approaches and help deepen the understanding of MPC technologies. The book is aimed at engineers in industry interested in the development and application of MPC systems, as well as students of different technical disciplines seeking an introduction into this field.
