Download or read book Multifunctional Nanostructured Metal Oxides for Energy Harvesting and Storage Devices written by Vijay B. Pawade and published by CRC Press. This book was released on 2020-05-21 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal oxide nanoparticles exhibit potential applications in energy and environmental fields, such as solar cells, fuel cells, hydrogen energy, and energy storage devices. This book covers all points from synthesis, properties, and applications of transition metal oxide nanoparticle materials in energy storage and conversion devices. Aimed at graduate-level students and researchers associated with the energy and environment sector, this book addresses the application of nontoxic and environmentally friendly metal oxide materials for a clean environment and deals with synthesis properties and application metal oxides materials for energy conversion, energy storage, and hydrogen generation.

Download or read book Multifunctional Nanostructured Metal Oxides for Energy Harvesting and Storage Devices written by Vijay B. Pawade and published by CRC Press. This book was released on 2020-05-21 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal oxide nanoparticles exhibit potential applications in energy and environmental fields, such as solar cells, fuel cells, hydrogen energy, and energy storage devices. This book covers all points from synthesis, properties, and applications of transition metal oxide nanoparticle materials in energy storage and conversion devices. Aimed at graduate-level students and researchers associated with the energy and environment sector, this book addresses the application of nontoxic and environmentally friendly metal oxide materials for a clean environment and deals with synthesis properties and application metal oxides materials for energy conversion, energy storage, and hydrogen generation.

Download or read book Metal Organic Frameworks Based Hybrid Materials for Environmental Sensing and Monitoring written by Ram K. Gupta and published by CRC Press. This book was released on 2022-06-22 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: With an unprecedented population boom and rapid industrial development, environmental pollution has become a severe problem for the ecosystem and public health. Classical techniques for sensing and determining environmental contaminants often require complex pretreatments, expensive equipment, and longer testing times. Therefore, new, and state-of-the-art sensing technologies possessing the advantages of excellent sensitivity, rapid detection, ease of use, and suitability for in situ, real-time, and continuous monitoring of environmental pollutants, are highly desirable. Metal-Organic Frameworks-based Hybrid Materials for Environmental Sensing and Monitoring covers the current-state-of-the-art hybrid nanomaterials based on metal-organic frameworks for electrochemical monitoring purposes. Accomplished authors cover various synthetic routes, methods, and theories behind enhancing the electrochemical properties and applications of metal-organic frameworks-based hybrid nanomaterials for electrochemical sensing of environmental pollutants under one roof. This book is essential reading for all academic and industrial researchers working in the fields of materials science and nanotechnology.

Download or read book Metal Oxide Nanostructures written by Daniela Nunes and published by Elsevier. This book was released on 2018-11-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanostructures: Synthesis, Properties and Applications covers the theoretical and experimental aspects related to design, synthesis, fabrication, processing, structural, morphological, optical and electronic properties on the topic. In addition, it reviews surface functionalization and hybrid materials, focusing on the advantages of these oxide nanostructures. The book concludes with the current and future prospective applications of these materials. Users will find a complete overview of all the important topics related to oxide nanostructures, from the physics of the materials, to its application. Delves into hybrid structured metal oxides and their promising use in the next generation of electronic devices Includes fundamental chapters on synthesis design and the properties of metal oxide nanostructures Provides an in-depth overview of novel applications, including chromogenics, electronics and energy

Download or read book Metal Oxide Based Nanostructured Electrocatalysts for Fuel Cells Electrolyzers and Metal Air Batteries written by Teko Napporn and published by Elsevier. This book was released on 2021-01-30 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries is a comprehensive book summarizing the recent overview of these new materials developed to date. The book is motivated by research that focuses on the reduction of noble metal content in catalysts to reduce the cost associated to the entire system. Metal oxides gained significant interest in heterogeneous catalysis for basic research and industrial deployment. Metal Oxide-Based Nanostructured Electrocatalysts for Fuel Cells, Electrolyzers, and Metal-Air Batteries puts these opportunities and challenges into a broad context, discusses the recent researches and technological advances, and finally provides several pathways and guidelines that could inspire the development of ground-breaking electrochemical devices for energy production or storage. Its primary focus is how materials development is an important approach to produce electricity for key applications such as automotive and industrial. The book is appropriate for those working in academia and R&D in the disciplines of materials science, chemistry, electrochemistry, and engineering. Includes key aspects of materials design to improve the performance of electrode materials for energy conversion and storage device applications Reviews emerging metal oxide materials for hydrogen production, hydrogen oxidation, oxygen reduction and oxygen evolution Discusses metal oxide electrocatalysts for water-splitting, metal-air batteries, electrolyzer, and fuel cell applications

Download or read book Oxide Free Nanomaterials for Energy Storage and Conversion Applications written by Prabhakarn Arunachalam and published by Elsevier. This book was released on 2021-12-01 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oxide Free Nanomaterials for Energy Storage and Conversion Applications covers in depth topics on non-oxide nanomaterials involving transition metal nitrides, carbides, selenides, phosphides, oxynitrides based electrodes, & other non-oxide groups. The current application of nanostructured nonoxides involves their major usage in energy storage and conversion devices variety of applications such as supercapacitor, batteries, dye-sensitized solar cells and hydrogen production applications. The current application of energy storage devices involves their usage of nanostructured non-oxide materials with improved energy and power densities. In this book readers will discover the major advancements in this field during the past decades. The various techniques used to prepare environmentally friendly nanostructured non-oxide materials, their structural and morphological characterization, their improved mechanical and material properties, and finally, current applications and future impacts of these materials are discussed. While planning and fabricating non-oxide materials, the readers must be concern over that they ought to be abundant, cost-efficient and environment-friendly for clean innovation and conceivably be of use in an expansive choice of utilization. The book gives detailed literature on the development of nanostructured non-oxides, their use as energy related devices and their present trend in the industry and market. This book also emphasis on the latest advancement about application of these noble non-oxide based materials for photocatalytic water-splitting. Recent progress on various kinds of both photocatalytic and electrocatalytic nanomaterials is reviewed, and essential aspects which govern catalytic behaviours and the corresponding stability are discussed. The book will give an updated literature on the synthesis, potential applications and future of nanostructured non-oxides in energy related applications. This book is highly useful to researchers working in the field with diversified backgrounds are expected to making the chapter truly interdisciplinary in nature. The contents in the book will emphasize the recent advances in interdisciplinary research on processing, morphology, structure and properties of nanostructured non-materials and their applications in energy applications such as supercapacitors, batteries, solar cells, electrochemical water splitting and other energy applications. Thus, nanotechnology researchers, scientists and experts need to have update of the growing trends and applications in the field of science and technology. Further, the postgraduate students, scientists, researchers and technologists are need to buy this book. Offers a comprehensive coverage of the nanostructured non-oxide materials and their potential energy applications Examines the properties of nanostructured non-oxide materials that make them so adaptable Explores the mechanisms by which nanoparticles interact with each other, showing how these can be used for industrial applications Shows the how nanostructured non-oxide materials are used in a wide range of industry sectors, containing energy production and storage

Download or read book Nanomaterials for Electrochemical Energy Storage Devices written by Poulomi Roy and published by John Wiley & Sons. This book was released on 2019-11-12 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy storage devices are considered to be an important field of interest for researchers worldwide. Batteries and supercapacitors are therefore extensively studied and progressively evolving. The book not only emphasizes the fundamental theories, electrochemical mechanism and its computational view point, but also discusses recent developments in electrode designing based on nanomaterials, separators, fabrication of advanced devices and their performances.

Download or read book Metal Oxides in Energy Technologies written by Yuping Wu and published by Elsevier. This book was released on 2018-10-05 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Energy Technologies provides, for the first time, a look at the wide range of energy applications of metal oxides. Topics covered include metal oxides materials and their applications in batteries, supercapacitors, fuel cells, solar cells, supercapacitors, and much more. The book is written by an experienced author of over 240 papers in peer-reviewed journals who was also been recognized as one of Thomson Reuter’s “World’s Most Influential Scientific Minds in 2015. This book presents a unique work that is ideal for academic researchers and engineers. Presents an authoritative overview on metal oxides in energy technologies as written by an expert author who has published extensively in the area Offers up-to-date coverage of a large, rapidly growing and complex literature Focuses on applications, making it an ideal resource for those who want to apply this knowledge in industry

Download or read book Multifunctional Piezoelectric Oxide Nanostructures written by Sang-Jae Kim and published by Elsevier. This book was released on 2023-12-01 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multifunctional Piezoelectric Oxide Nanostructures: Fabrication Methods, Devices and Applications reviews multifunctional piezoelectric oxides, including their growth, thin films, composite films, interfacial doping effects, energy harvesting devices, and battery-free sensors. The book bridges the connection between the theoretical and experimental aspects of piezoelectric oxides, also explaining the pathways between materials-device designs-application sectors through various state-of-the-art techniques. Other sections cover the desirable properties of piezoelectric oxides, including pyroelectric, magnetoelectric, piezoelectrochemical and electrocaloric. This book is suitable for those working in the field of materials science and engineering in academia and research and development. Reviews fundamentals, materials, technologies and applications of piezoelectric oxide nanostructures Addresses the most relevant applications in sensing (self-powered, biomedical, MEMS, infrared) and energy harvesting Discusses the growth, design and fabrication of piezoelectric oxide nanostructured materials for desirable properties

Download or read book Colloidal Metal Oxide Nanoparticles written by and published by Elsevier. This book was released on 2019-10-16 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloidal Metal Oxide Nanoparticles: Synthesis, Characterization and Applications is a one-stop reference for anyone with an interest in the fundamentals, synthesis and applications of this interesting materials system. The book presents a simple, effective and detailed discussion on colloidal metal oxide nanoparticles. It begins with a general introduction of colloidal metal oxide nanoparticles, then delves into the most relevant synthesis pathways, stabilization procedures, and synthesis and characterization techniques. Final sections discuss promising applications, including bioimaging, biosensing, diagnostic, and energy applications—i.e., solar cells, supercapacitors and environment applications—i.e., the treatment of contaminated soil, water purification and waste remediation. Provides the most comprehensive resource on the topic, from fundamentals, to synthesis and characterization techniques Presents key applications, including biomedical, energy, electronic and environmental Discusses the most relevant techniques for synthesis, patterning and characterization

Download or read book Metal Oxide Based Thin Film Structures written by Nini Pryds and published by Elsevier. This book was released on 2017-09-07 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Thin Film Structures: Formation, Characterization and Application of Interface-Based Phenomena bridges the gap between thin film deposition and device development by exploring the synthesis, properties and applications of thin film interfaces. Part I deals with theoretical and experimental aspects of epitaxial growth, the structure and morphology of oxide-metal interfaces deposited with different deposition techniques and new developments in growth methods. Part II concerns analysis techniques for the electrical, optical, magnetic and structural properties of thin film interfaces. In Part III, the emphasis is on ionic and electronic transport at the interfaces of Metal-oxide thin films. Part IV discusses methods for tailoring metal oxide thin film interfaces for specific applications, including microelectronics, communication, optical electronics, catalysis, and energy generation and conservation. This book is an essential resource for anyone seeking to further their knowledge of metal oxide thin films and interfaces, including scientists and engineers working on electronic devices and energy systems and those engaged in research into electronic materials. Introduces the theoretical and experimental aspects of epitaxial growth for the benefit of readers new to the field Explores state-of-the-art analysis techniques and their application to interface properties in order to give a fuller understanding of the relationship between macroscopic properties and atomic-scale manipulation Discusses techniques for tailoring thin film interfaces for specific applications, including information, electronics and energy technologies, making this book essential reading for materials scientists and engineers alike

Download or read book Solution Processed Metal Oxide Thin Films for Electronic Applications written by Zheng Cui and published by Elsevier. This book was released on 2020-06-11 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solution Processed Metal Oxide Thin Films for Electronic Applications discusses the fundamentals of solution processing materials chemistry techniques as they are applied to metal oxide materials systems for key device applications. The book introduces basic information (materials properties, materials synthesis, barriers), discusses ink formulation and solution processing methods, including sol-gel processing, surface functionalization aspects, and presents a comprehensive accounting on the electronic applications of solution processed metal oxide films, including thin film transistors, photovoltaic cells and other electronics devices and circuits. This is an important reference for those interested in oxide electronics, printed electronics, flexible electronics and large-area electronics. Provides in-depth information on solution processing fundamentals, techniques, considerations and barriers combined with key device applications Reviews important device applications, including transistors, light-emitting diodes, and photovoltaic cells Includes an overview of metal oxide materials systems (semiconductors, nanomaterials and thin films), addressing materials synthesis, properties, limitations and surface aspects

Download or read book Metal Oxides and Related Solids for Electrocatalytic Water Splitting written by Junlei Qi and published by Elsevier. This book was released on 2022-05-16 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides and Related Solids for Electrocatalytic Water Splitting reviews the fundamentals and strategies needed to design and fabricate metal oxide-based electrocatalysts. After an introduction to the key properties of transition metal oxides, materials engineering methods to optimize the performance of metal-oxide based electrocatalysts are discussed. Strategies reviewed include defect engineering, interface engineering and doping engineering. Other sections cover important categories of metal-oxide (and related solids) based catalysts, including layered hydroxides, metal chalcogenides, metal phosphides, metal nitrides, metal borides, and more. Each chapter introduces important properties and material design strategies, including composite and morphology design. There is also an emphasis on cost-effective materials design and fabrication for optimized performance for electrocatalytic water splitting applications. Lastly, the book touches on recently developed in-situ characterization methods applied to observe and control the material synthesis process. Introduces metal oxide-based materials for electrocatalytic water splitting applications, including their key properties, synthesis, design and fabrication strategies Reviews the most relevant materials design strategies, including defect engineering, interface engineering, and doping engineering Discusses the pros and cons of metal oxide-based materials for water splitting applications to aid in materials selection

Download or read book Graphene Oxide Metal Oxide and other Graphene Oxide Based Composites in Photocatalysis and Electrocatalysis written by Jiaguo Yu and published by Elsevier. This book was released on 2022-06-24 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graphene Oxide-Metal Oxide and other Graphene Oxide-Based Composites in Photocatalysis and Electrocatalysis reflects on recent progress and challenges in graphene-metal oxide composites. The book reviews synthetic strategies, characterization methods and applications in photocatalysis and electrocatalysis. Graphene-metal oxides, graphene-novel metals and other composites intended for sustainable energy production, energy storage, and environmental development such as H2 production, CO2 reduction, pollutant removal, supercapacitors and lithium ion batteries are covered. Overall, this book presents a comprehensive, systematic, and up-to-date summary on graphene oxide-based materials. Graphene oxide and related composite materials bring new perspectives and prospects to both photocatalysts and electrocatalysts. The collective and synergistic effect between graphene oxide and metal oxide are manifold. The significance of the relationship among these groups of materials, their structures and performance is emphasized. Introduces the fundamentals of graphene oxides, their derivatives, common processes, principles and requirements for photocatalysis and electrocatalysis Reviews graphene-oxides for photocatalysis applications in H2 production, CO2 reduction, environment remediation, and more Covers graphene-oxides for electrocatalysis applications in energy, including supercapacitors and lithium-ion batteries

Download or read book Metal Oxide Based Photocatalysis written by Adriana Zaleska-Medynska and published by Elsevier. This book was released on 2018-04-09 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide-Based Photocatalysis: Fundamentals and Prospects for Application explains the principles and fundamentals of metal oxide-based photocatalysis and the requirements necessary for their use in photocatalysis. It also discusses preparation methods for photocatalysis, and the advantages, disadvantages and achievements of the most important metal oxides (TiO2, ZnO, Fe2O3, Ta2O3, CuO, NiO, Cr2O3, RuO2, etc.). The book concludes with the most important photocatalytic applications and an overview of the future. Applications are organized by potential needs and solutions, addressing such areas as water treatment, hydrogen production, air treatment, chemical synthesis, and applications in medicine and construction. Provides coverage of applications, presenting needs and solutions Covers essential applications, such as water treatment, hydrogen production, air depollution, medical applications, and much more Includes the characterization of the most important metal oxides used in heterogeneous photocatalysis

Download or read book Cerium Oxide CeO2 Synthesis Properties and Applications written by Salvatore Scire and published by Elsevier. This book was released on 2019-08-21 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cerium Oxide (CeO2): Synthesis, Properties and Applications provides an updated and comprehensive account of the research in the field of cerium oxide based materials. The book is divided into three main blocks that deal with its properties, synthesis and applications. Special attention is devoted to the growing number of applications of ceria based materials, including their usage in industrial and environmental catalysis and photocatalysis, energy production and storage, sensors, cosmetics, radioprotection, glass technology, pigments, stainless steel and toxicology. A brief historical introduction gives users background, and a final chapter addresses future perspectives and outlooks to stimulate future research. The book is intended for a wide audience, including students, academics and industrial researchers working in materials science, chemistry and physics. Addresses a wide range of applications of ceria-based materials, including catalysis, energy production and storage, sensors, cosmetics and toxicology Provides the fundamentals of ceria-based materials, including synthesis methods, materials properties, toxicology and surface chemistry Includes nanostructured ceria-based materials and a discussion of future prospects and outlooks

Download or read book Renewable Polymers and Polymer Metal Oxide Composites written by Sajjad Haider and published by Elsevier. This book was released on 2022-03-17 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable Polymers and Polymer-Metal Oxide Composites: Synthesis, Properties, and Applications serves as a reference on the key concepts of the advances of polymer-oxide composites. The book reviews knowledge on polymer-composite theory, properties, structure, synthesis, and their characterization and applications. There is an emphasis on coupling metal oxides with polymers from renewable sources. Also, the latest advances in the relationship between the microstructure of the composites and the resulting improvement of the material’s properties and performance are covered. The applications addressed include desalination, tissue engineering, energy storage, hybrid energy systems, food, and agriculture. This book is suitable for early-career researchers in academia and R&D in industry who are working in the disciplines of materials science, engineering, chemistry and physics. Provides basic principles, theory and synthetic methods of composite materials, polymer composites and metal oxides Reviews the latest advances in polymer-oxide-based applications in medicine, water treatment, energy and sensing Discusses materials from renewable resources, including lifecycle assessment, economic aspects and potential application in tissue engineering, photovoltaics and food packaging