Download or read book Mostly Magnets written by AIMS Education Foundation and published by . This book was released on 2008 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mostly Magnets written by Evalyn Hoover and published by . This book was released on 1991 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Students learn about the varied behavior of magnets and clarify the attendant concepts.
Download or read book Rapidly Solidified Neodymium Iron Boron Permanent Magnets written by John J. Croat and published by Woodhead Publishing. This book was released on 2017-10-24 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapidly Solidified Neodymium-Iron-Boron Permanent Magnets details the basic properties of melt spun NdFeB materials and the entire manufacturing process for rapidly solidified NdFeB permanent magnets. It covers the manufacturing process from the commercial production of the melt spun or rapidly solidified powder, to the production and properties of both isotropic bonded Nd and hot deformed anisotropic NdFeB magnets. In addition, the book discusses the development and history of bonded rare earth transition metal magnets and the discovery of the NdFeB compound, also covering melt spun NdFeB alloys and detailing the magnetization process and spring exchange theory. The book goes over the production of melt spinning development, the operation of a melt spinner, the processing of melt spun powder, commercial grades of NdFeB magnetic powder and gas atomized NdFeB magnetic powders. Lastly, the book touches on the major application and design advantages of bonded Nd Magnets. Features a unique perspective as the author is not only the inventor of NdFeB magnetic powder, but also played a key role in developing many of the technologies covered Provides a comprehensive look at the history, fundamental properties, production processes, design and applications of bonded NdFeB magnets Includes discussion of the rare earth supply challenge, politics, and systems as it impacts bonded NdFeB magnets
Download or read book High Magnetic Field Science and Its Application in the United States written by National Research Council and published by National Academies Press. This book was released on 2013-12-25 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Committee to Assess the Current Status and Future Direction of High Magnetic Field Science in the United States was convened by the National Research Council in response to a request by the National Science Foundation. This report answers three questions: (1) What is the current state of high-field magnet science, engineering, and technology in the United States, and are there any conspicuous needs to be addressed? (2) What are the current science drivers and which scientific opportunities and challenges can be anticipated over the next ten years? (3) What are the principal existing and planned high magnetic field facilities outside of the United States, what roles have U.S. high field magnet development efforts played in developing those facilities, and what potentials exist for further international collaboration in this area? A magnetic field is produced by an electrical current in a metal coil. This current exerts an expansive force on the coil, and a magnetic field is "high" if it challenges the strength and current-carrying capacity of the materials that create the field. Although lower magnetic fields can be achieved using commercially available magnets, research in the highest achievable fields has been, and will continue to be, most often performed in large research centers that possess the materials and systems know-how for forefront research. Only a few high field centers exist around the world; in the United States, the principal center is the National High Magnetic Field Laboratory (NHMFL). High Magnetic Field Science and Its Application in the United States considers continued support for a centralized high-field facility such as NHFML to be the highest priority. This report contains a recommendation for the funding and siting of several new high field nuclear magnetic resonance magnets at user facilities in different regions of the United States. Continued advancement in high-magnetic field science requires substantial investments in magnets with enhanced capabilities. High Magnetic Field Science and Its Application in the United States contains recommendations for the further development of all-superconducting, hybrid, and higher field pulsed magnets that meet ambitious but achievable goals.
Download or read book Popular Science written by and published by . This book was released on 1959-03 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.
Download or read book Primarily Magnets written by AIMS Education Foundation and published by . This book was released on 2008 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains lesson plans and reproducible worksheets for a collection of integrated math and science activities that focus on magnets and magnetism. Students investigate magnets interacting with other materials, magnets interacting with other magnets, magnetic fields, and everyday uses of magnets. Reproducible worksheets for learning and assessment activities are also included on the CD-ROM.
Download or read book Modern Permanent Magnets written by John J. Croat and published by Woodhead Publishing. This book was released on 2022-01-27 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Permanent Magnets provides an update on the status and recent technical developments that have occurred in the various families of permanent magnets produced today. The book gives an overview of the key advances of permanent magnet materials that have occurred in the last twenty years. Sections cover the history of permanent magnets, their fundamental properties, an overview of the important families of permanent magnets, coatings used to protect permanent magnets and the various tests used to confirm specifications are discussed. Finally, the major applications for each family of permanent magnets and the size of the market is provided. The book also includes an Appendix that provides a Glossary of Magnetic Terms to assist the readers in better understanding the technical terms used in other chapters. This book is an ideal resource for materials scientists and engineers working in academia and industry R&D. Provides an in-depth overview of all of the important families of permanent magnets produced today Includes background information on the fundamental properties of permanent magnets, major applications of each family of permanent magnets, and advances in coatings and coating technology Reviews the fundamentals of permanent magnet design
Download or read book Case Studies in Superconducting Magnets written by Yukikazu Iwasa and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed for graduate students in mechanical engineering, this textbook discusses the basic concepts of superconducting magnet technology. Important topics covered include field distribution, magnets, force, thermal stability, dissipation, and protection. To help the students excel in the field, each chapter contains tutorial problems, accompanied by solutions, utilizing solenoidal magnets as examples.
Download or read book Magnet Therapy written by Ghanshyam Singh Birla and published by Inner Traditions / Bear & Co. This book was released on 1999-09 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors detail methods for treating symptoms ranging from asthma to toothaches and weigh the benefits of magnetic necklaces, magnetic belts, and magnetized water, as well as traditional bipolar magnets. 40 illustrations.
Download or read book Clinical Low Field Strength Magnetic Resonance Imaging written by Hans-Martin Klein and published by Springer. This book was released on 2015-10-03 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers all aspects of low field MRI, describing its advantages, problems and prerequisites. Individual chapters are devoted to site planning, safety considerations, coils, imaging technique, image quality optimization, the imaging of different anatomic regions and likely future developments. The factors that must be borne in mind when selecting a low field system are clearly identified and detailed attention is paid to the applications for which such a system is adequate. The focus on high field systems has led to a situation where only a few systems with field strengths lower than 0.5 T survive. Some of these systems possess high field features such as multichannel coils and strong gradients; furthermore, sequence technology and image processing techniques taken from higher field strength systems have resulted in impressive imaging capabilities. While 1.5-T systems will probably continue to remain the standard, low field systems offer advantages such as the feasibility of dynamic joint examinations, improvement of T1 contrast, reduction of “missile effects” and decreased radiofrequency exposure. Low field strength MRI consequently has the potential to contribute to optimal patient management and given comparable image quality, its application may become an issue of patient safety. This book will be an invaluable asset to all who are involved in planning and/or running a low field strength MRI facility.
Download or read book Synthesis and characterization of magnetic nanolaminated carbides written by Andrejs Petruhins and published by Linköping University Electronic Press. This book was released on 2018-03-15 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: MAX phases are a group of nanolaminated ternary carbides and nitrides, with a composition expressed by the general formula Mn+1AXn (?? = 1 ? 3), where M is a transition metal, A is an A-group element, and X is carbon and/or nitrogen. MAX phases have attracted interest due to their unique combination of metallic and ceramic properties, related to their inherently laminated structure of a transition metal carbide (Mn+1Xn) layer interleaved by an A-group metal layer. This Thesis explores synthesis and characterization of magnetic MAX phases, where the A-group element is gallium (Ga). Due to the low melting point of Ga (T = 30 °C), conventional thin film synthesis methods become challenging, as the material is in liquid form at typical process temperatures. Development of existing methods has therefore been investigated, for reliable/reproducible synthesis routes, including sputtering from a liquid target, and resulting high quality material. Routes for minimizing trial-and-error procedures during optimization of thin film synthesis have also been studied, allowing faster identification of optimal deposition conditions and a simplified transfer of essential deposition parameters between different deposition systems. A large part of this Thesis is devoted towards synthesis of MAX phase thin films in the Cr-Mn-Ga-C system. First, through process development, thin films of Cr2GaC were deposited by magnetron sputtering. The films were epitaxial, however with small amount of impurity phase Cr3Ga, as confirmed by X-ray diffraction (XRD) measurements. The film structure was confirmed by scanning transmission electron microscopy (STEM) and the composition by energy dispersive X-ray spectroscopy (EDX) inside the TEM. Inspired by predictive ab initio calculations, the new MAX phase Mn2GaC was successfully synthesized in thin film form by magnetron sputtering. Structural parameters and magnetic properties were analysed. The material was found to have two magnetic transitions in the temperature range 3 K to 750 K, with a first order transition at around 214 K, going from non-collinear antiferromagnetic state at lower temperature to an antiferromagnetic state at higher temperature. The Neél temperature was determined to be 507 K, changing from an antiferromagnetic to a paramagnetic state. Above 800 K, Mn2GaC decomposes. Furthermore, magnetostrictive, magnetoresistive and magnetocaloric properties of the material were iv determined, among which a drastic change in lattice parameters upon the first magnetic transition was observed. This may be of interest for magnetocaloric applications. Synthesis of both Cr2GaC and Mn2GaC in thin film form opens the possibility to tune the magnetic properties through a solid solution on the transition metal site, by alloying the aforementioned Cr2GaC with Mn, realizing (Cr1-xMnx)2GaC. From a compound target with a Cr:Mn ratio of 1:1, thin films of (Cr0.5Mn0.5)2GaC were synthesized, confirmed by TEM-EDX. Optimized structure was obtained by deposition on MgO substrates at a deposition temperature of 600 ºC. The thin films were phase pure and of high structural quality, allowing magnetic measurements. Using vibrating sample magnetometry (VSM), it was found that (Cr0.5Mn0.5)2GaC has a ferromagnetic component in the temperature range from 30 K to 300 K, with the measured magnetic moment at high field decreasing by increasing temperature. The remanent moment and coercive field is small, 0.036 ?B, and 12 mT at 30 K, respectively. Using ferromagnetic resonance spectroscopy, it was also found that the material has pure spin magnetism, as indicated by the determined spectroscopic splitting factor g = 2.00 and a negligible magnetocrystalline anisotropy energy. Fuelled by the recent discoveries of in-plane chemically ordered quaternary MAX phases, so called i-MAX phases, and guided by ab initio calculations, new members within this family, based on Cr and Mn, were synthesized by pressureless sintering methods, realizing (Cr2/3Sc1/3)2GaC and (Mn2/3Sc1/3)2GaC. Their structural properties were determined. Through these phases, the Mn content is the highest obtained in a bulk MAX phase to date. This work has further developed synthesis processes for sputtering from liquid material, for an optimized route to achieve thin films of controlled composition and a high structural quality. Furthermore, through this work, Mn has been added as a new element in the family of MAX phase elements. It has also been shown, that alloying with different content of Mn gives rise to varying magnetic properties in MAX phases. As a result of this Thesis, it is expected that the MAX phase family can be further expanded, with more members of new compositions and new properties.
Download or read book Magnetic Materials and Their Applications written by Carl Heck and published by Elsevier. This book was released on 2013-10-22 with total page 797 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Materials and their Applications discusses the principles and concepts behind magnetic materials and explains their applications in the fields of physics and engineering. The book covers topics such as the principal concepts and definitions related to magnetism; types of magnetic materials and their electrical and mechanical properties; and the different factors influencing magnetic behavior. The book also covers topics such as permanent-magnet materials; magnetic materials in heavy-current engineering; and the different uses of magnetic materials. The text is recommended for physicists and electrical engineers who would like to know more about magnetic materials and their applications in the field of electronics.
Download or read book Life at Home in the Twenty First Century written by Jeanne E. Arnold and published by Cotsen Institute of Archaeology Press. This book was released on 2012-12-31 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Winner of the 2014 John Collier Jr. Award Winner of the Jo Anne Stolaroff Cotsen Prize Life at Home in the Twenty-First Century cross-cuts the ranks of important books on social history, consumerism, contemporary culture, the meaning of material culture, domestic architecture, and household ethnoarchaeology. It is a distant cousin of Material World and Hungry Planet in content and style, but represents a blend of rigorous science and photography that these books can claim. Using archaeological approaches to human material culture, this volume offers unprecedented access to the middle-class American home through the kaleidoscopic lens of no-limits photography and many kinds of never-before acquired data about how people actually live their lives at home. Based on a rigorous, nine-year project at UCLA, this book has appeal not only to scientists but also to all people who share intense curiosity about what goes on at home in their neighborhoods. Many who read the book will see their own lives mirrored in these pages and can reflect on how other people cope with their mountains of possessions and other daily challenges. Readers abroad will be equally fascinated by the contrasts between their own kinds of materialism and the typical American experience. The book will interest a range of designers, builders, and architects as well as scholars and students who research various facets of U.S. and global consumerism, cultural history, and economic history.
Download or read book Magnetic Resonance Imaging written by Christakis Constantinides and published by CRC Press. This book was released on 2016-02-03 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic resonance imaging (MRI) is a rapidly developing field in basic applied science and clinical practice. Research efforts in this area have already been recognized with five Nobel prizes awarded to seven Nobel laureates in the past 70 years. Based on courses taught at The Johns Hopkins University, Magnetic Resonance Imaging: The Basics provid
Download or read book Sustainability in the Mineral and Energy Sectors written by Sheila Devasahayam and published by CRC Press. This book was released on 2016-09-15 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable practices within the mining and energy sectors are assuming greater significance due to uncertainty and change within the global economy and safety, security, and health concerns. This book examines sustainability issues facing the mining and energy sectors by addressing six major themes: Mining and Mineral Processing; Metallurgy and Recycling; Environment; Energy; Socioeconomic and Regulatory; and Sustainable Materials and Fleets. Emphasizing an integrated transdisciplinary approach, it deliberates on optimizing mining productivity and energy efficiency and discusses integrated waste management practices. It discusses risk management, cost cutting, and integration of sustainable practices for long-term business value. It gives a comprehensive outlook for sustainable mineral futures from academic and industry perspectives covering mine to mill optimization, waste, risk and water management, improved efficiencies in mining tools and equipment, and performance indicators for sustainable developments. It covers how innovation and research underpin management of natural resources including sustainable carbon management. •Focuses on mining and mineral processing, metallurgy and recycling, the environment, energy, socioeconomic and regulatory issues, and sustainable materials and fleets. •Describes metallurgy and recycling and uses economic, environmental and social parameter analyses to identify areas for improvement in iron, steel, aluminium, lead, zinc, copper, and gold production. •Discusses current research on mining, performance indicators for sustainable development, sustainability in mining equipment, risk and safety management, and renewable energy resources •Covers alternative and conventional energy sources for the mineral sector as well water treatment and remediation and energy sustainability in mining. •Provides an overview of sustainable carbon management. •Offers an interdisciplinary approach with international focus.
Download or read book Anthropogenic Environmental Hazards written by Pankaj Pathak and published by Springer Nature. This book was released on 2023-10-27 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delves into the anthropogenic activities responsible for environmental hazards, their compensation, and potential mitigation strategies. It sheds light on the major contributors to the climate change issues aggravated by non-sustainable practices for the overexploitation of natural resources. Critical topics such as high emissions in primary mining, the recovery of energy-critical metals by urban mining, solid waste management, and forest conservation are explored, offering insights into the urgent challenges we face. Amidst the rapid demand for resources and the expansion of human habitats, the book emphasizes the need for new approaches to natural resource management and introspection of our actions. Experts in the field discuss existing anthropogenic environmental hazards in detail, alongside environmental compensation, and effective mitigation approaches. The book begins with a chapter dedicated to risk assessment in primary mining activities for precious metals, proposing potential routes for mitigation. Chapter 2 focuses on assessing and mitigating the environmental footprints of energy-critical metals used in permanent magnets. In Chapter 3, a case study examines sustainable resource utilization through end-of-life room air conditioner recycling. Additional chapters provide critical insights into: The environmental impacts of e-waste and government policies for responsible management Hazards associated with industrial effluents and corresponding mitigation strategies The role of roadside plants in phytoremediation of heavy metal pollution Sustainable utilization of anthropogenic coal fly ash through mechanical and chemical activation Environmental damages resulting from the mismanagement of municipal solid waste Environmental problems and remediation strategies for anthropogenic biomass waste Challenges in sustainable municipal solid waste management and suggestions for environmental risk mitigation The book concludes with a chapter discussing collaborative governance and non-monetary compensation mechanisms for sustainable forest management. Given its breadth, this book serves as an indispensable resource for researchers, policymakers, and environmental professionals seeking sustainable approaches to tackle pressing environmental challenges.
Download or read book Hands On Accelerator Physics Using MATLAB written by Volker Ziemann and published by CRC Press. This book was released on 2019-04-29 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Awarded one of BookAuthority's best new Particle Physics books in 2019! Hands-On Accelerator Physics Using MATLAB® provides an introduction into the design and operational issues of a wide range of particle accelerators, from ion-implanters to the Large Hadron Collider at CERN. Many aspects from the design of beam optical systems and magnets, to the subsystems for acceleration, beam diagnostics, and vacuum are covered. Beam dynamics topics ranging from the beam-beam interaction to free-electron lasers are discussed. Theoretical concepts and the design of key components are explained with the help of MATLAB® code. Practical topics, such as beam size measurements, magnet construction and measurements, and radio-frequency measurements are explored in student labs without requiring access to an accelerator. This unique approach provides a look at what goes on 'under the hood' inside modern accelerators and presents readers with the tools to perform their independent investigations on the computer or in student labs. This book will be of interest to graduate students, postgraduate researchers studying accelerator physics, as well as engineers entering the field. Features: Provides insights into both synchrotron light sources and colliders Discusses technical subsystems, including magnets, radio-frequency engineering, instrumentation and diagnostics, correction of imperfections, control, and cryogenics Accompanied by MATLAB® code, including a 3D-modeler to visualize the accelerators, and additional appendices which are available on the CRC Press website
