Download or read book Molding Simulation Theory and Practice written by Maw-Ling Wang and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2022-06-07 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical introductory guide to injection molding simulation is aimed at both practicing engineers and students. It will help the reader to innovate and improve part design and molding processes, essential for efficient manufacturing. A user-friendly, case-study-based approach is applied, enhanced by many illustrations in full color. The book is conceptually divided into three parts: Chapters 1–5 introduce the fundamentals of injection molding, and how molding simulation methodology is developed, especially focusing on the effects on molding quality from the rheological, thermodynamic, thermal, mechanical, and kinetic properties of plastics, as well as curing kinetics for thermoset plastics. Chapters 6–11 introduce CAE verification on injection molding including design guidelines of part, gating, runner, and cooling channel systems. Temperature control in hot runner systems, prediction and control of warpage, and fiber orientation are also discussed. Chapters 12–17 introduce research and development in innovative molding, illustrating how CAE is applied to advanced molding techniques, including co-/bi-injection molding, gas-/water-assisted injection molding, foam injection molding, powder injection molding, resin transfer molding (RTM), and integrated circuit (IC) packaging. The 2nd edition contains many updates, including elaboration of material measurement data, connection of Smart Design and Smart Manufacturing, demonstration of the flow-induced fiber orientation effect, implementations of material characterization methods on PU reactive foaming and RTM, studies of dispensing control and creeping behaviors effects on IC underfill process, and much more. Several CAE case study exercises for execution in Moldex3D software are included to allow readers to practice what they have learned and test their understanding.
Download or read book Molding Simulation written by Maw-Ling Wang and published by Hanser Publications. This book was released on 2018 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical introductory guide to injection molding simulation is aimed at both practicing engineers and students. It will help the reader to innovate and improve part design and molding processes, essential for efficient manufacturing. A user-friendly, case-study-based approach is applied, enhanced by many illustrations in color. The book is conceptually divided into 3 parts: Chapters 1-5 introduce the fundamentals of injection molding, focusing the factors governing molding quality and how molding simulation methodology is developed. As they are essential to molding quality, the rheological, thermodynamic, thermal, mechanical, kinetic properties of plastics are fully elaborated in this part, as well as curing kinetics for thermoset plastics. Chapters 6-11 introduce CAE verification of design, a valuable tool for both part and mold designers toward avoiding molding problems in the design stage and to solve issues encountered in injection molding. This part covers design guidelines of part, gating, runner, and cooling channel systems. Temperature control in hot runner systems, prediction and control of warpage, and fiber orientation are also discussed. Chapters 12-17 introduce research and development in innovative molding, illustrating how CAE is applied to advanced molding techniques, including co-/bi-Injection molding, gas-/water-assisted injection molding, foam injection molding, powder injection molding, resin transfer molding, and integrated circuit packaging. The authors come from the creative simulation team at CoreTech System (Moldex3D), winner of the PPS James L. White Innovation Award 2015. Several CAE case study exercises for execution in the Moldex3D software are included to allow readers to practice what they have learned and test their understanding--
Download or read book Molding Simulation Theory and Practice written by David Hsu and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Modeling for Injection Molding written by Huamin Zhou and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a wide range of applications and uses of simulation and modeling techniques in polymer injection molding, filling a noticeable gap in the literature of design, manufacturing, and the use of plastics injection molding. The authors help readers solve problems in the advanced control, simulation, monitoring, and optimization of injection molding processes. The book provides a tool for researchers and engineers to calculate the mold filling, optimization of processing control, and quality estimation before prototype molding.
Download or read book Injection Molding written by Rong Zheng and published by Springer Science & Business Media. This book was released on 2011-06-21 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers fundamental principles and numerical methods relevant to the modeling of the injection molding process. As injection molding processing is related to rheology, mechanical and chemical engineering, polymer science and computational methods, and is a rapidly growing field, the book provides a multidisciplinary and comprehensive introduction to the subjects required for an understanding of the complex process. It addresses the up-to-date status of fundamental understanding and simulation technologies, without losing sight of still useful classical approaches. The main chapters of the book are devoted to the currently active fields of flow-induced crystallization and orientation evolution of fiber suspensions, respectively, followed by detailed discussion of their effects on mechanical property, shrinkage and warpage of injection-molded products. The level of the proposed book will be suitable for interested scientists, R&D engineers, application engineers, and graduate students in engineering.
Download or read book Injection Molding written by Irvin I. Rubin and published by Wiley-Interscience. This book was released on 1973 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential primer on injection molding design and execution Injection molding has become ubiquitous, and the proof is in the product from parts to packaging to products, this versatile manufacturing method has become a hallmark of the plastics industry. Injection Molding: Theory and Practice is an essential primer for designers and line workers alike, providing clear, expert guidance for every step of the process. From molds and materials to hydraulics and electrical mechanisms, this book tells you everything you need to know to effectively design for and work with an injection molding machine.
Download or read book Robust Process Development and Scientific Molding written by Suhas Kulkarni and published by Hanser. This book was released on 2017 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the reader to the concepts of Scientific Molding and Scientific Processing for Injection Molding, geared towards developing a robust, repeatable, and reproducible (3Rs) molding process. The effects of polymer morphology, thermal transitions, drying, and rheology on the injection molding process are explained in detail. The development of a robust molding process is broken down into two sections and is described as the Cosmetic Process and the Dimensional Process. Scientific molding procedures to establish a 3R process are provided. The concept of Design of Experiments (DOEs) for and in injection molding is explained, providing an insight into the cosmetic and dimensional process windows. A plan to release qualified molds into production with troubleshooting tips is also provided. Topics that impact a robust process such as the use of regrind, mold cooling, and venting are also described. Readers will be able to utilize the knowledge gained from the book in their day-to-day operations immediately. The second edition includes a completely new chapter on Quality Concepts, as well as much additional material throughout the book, covering fountain flow, factors affecting post mold shrinkage, and factor selections for DOEs. There are also further explanations on several topics, such as in-mold rheology curves, cavity imbalances, intensification ratios, gate seal studies, holding time optimization of hot runner molds, valve gated molds, and parts with large gates. A troubleshooting guide for common molded defects is also provided. With the purchase of this book, you also receive a free personal access code to download the eBook.
Download or read book Injection Molding Process Modelling written by Tien-Chien Jen and published by CRC Press. This book was released on 2024-09-11 with total page 131 pages. Available in PDF, EPUB and Kindle. Book excerpt: Injection Molding Process Modelling presents the application of CAE, statistics and AI in defect identification, control, and optimization of injection molding process for quality production. It showcases CAE in determining the optimal placement of injection points, designing cooling channels, and ensuring that the mold will produce parts with the desired specifications. The book illustrates the capability of the CAE tools to simulate molten plastic flow within a mold during the injection molding process. Explaining how the use of CAE, statistical tools and AI enhances efficiency, accuracy, and collaboration, the book explores the contributions to injection molding in product design and visualization; prototyping and testing; mold design; and analysis and simulation. It emphasizes the integration of statistical tools for optimized efficiency and waste reduction, including statistical process control (SPC), Design of Experiments (DOE), Regression Analysis, Capability Indices, Interaction effects, and many more. The book also illustrates the predictive modelling of typical injection molded product defects using intelligent algorithms. The book will interest industry professionals and engineers working in manufacturing, production, automation, and quality control.
Download or read book Injection Molding Simulation for Beginners written by Ruben Schlutter and published by Carl Hanser Verlag GmbH Co KG. This book was released on 2023-09-11 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers an up-to-date, platform-independent introduction to injection molding simulation, which plays a very important role in the design of molds and molded parts as well as process development and optimization. The content is structured and conveyed within an engineering framework. Complicated mathematical derivations are avoided as far as possible. The necessary environment of the injection molding simulation is illuminated alongside, so that the creation of a suitable simulation model, the knowledge of the model-specific limits, and the interpretation of the results are possible. Guidance is also provided regarding the interpretation of results so that they can be better evaluated quantitatively. The book is designed as a textbook and thus is suitable to accompany courses covering injection molding simulation. The content is largely independent of any particular software package; however, introductory practice examples for Autodesk Moldflow Insight and Moldex3D are included as step-by-step instructions.
Download or read book Biopharmaceutics Modeling and Simulations written by Kiyohiko Sugano and published by John Wiley & Sons. This book was released on 2012-07-31 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to using modeling and simulation programs in drug discovery and development Biopharmaceutical modeling has become integral to the design and development of new drugs. Influencing key aspects of the development process, including drug substance design, formulation design, and toxicological exposure assessment, biopharmaceutical modeling is now seen as the linchpin to a drug's future success. And while there are a number of commercially available software programs for drug modeling, there has not been a single resource guiding pharmaceutical professionals to the actual tools and practices needed to design and test safe drugs. A guide to the basics of modeling and simulation programs, Biopharmaceutics Modeling and Simulations offers pharmaceutical scientists the keys to understanding how they work and are applied in creating drugs with desired medicinal properties. Beginning with a focus on the oral absorption of drugs, the book discusses: The central dogma of oral drug absorption (the interplay of dissolution, solubility, and permeability of a drug), which forms the basis of the biopharmaceutical classification system (BCS) The concept of drug concentration How to simulate key drug absorption processes The physiological and drug property data used for biopharmaceutical modeling Reliable practices for reporting results With over 200 figures and illustrations and a peerless examination of all the key aspects of drug research—including running and interpreting models, validation, and compound and formulation selection—this reference seamlessly brings together the proven practical approaches essential to developing the safe and effective medicines of tomorrow.
Download or read book Advances in Manufacturing Processes Intelligent Methods and Systems in Production Engineering written by Andre Batako and published by Springer Nature. This book was released on 2022-04-19 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book forms an excellent basis for the development of intelligent manufacturing system for Industry 4.0, digital and distributed manufacturing, and factories for future. This book of new developments and advancement in intelligent control and optimization system for production engineering serves as a good companion to scholars, manufacturing companies, and RTO to improve the efficiency of production systems.
Download or read book Injection Molding Handbook written by Tim A. Osswald and published by Hanser Gardner Publications. This book was released on 2008 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Injection Molding Handbook provides engineers, professionals and other involved in this important industry sector with a thorough up-to-date overview of injection molding processing equipment and techniques, including the basic fundamental information on chemistry, physics, material science and process engineering. It covers all components of the injection molding machine and the various process steps. Topics directly affecting injection molding, such as material selection, process control, simulation, design and troubleshooting complete this reference book for the injection molder. The updated second edition handbook presents a well-rounded overview of the underlying theory governing the various injection molding processes without loosing its practical flavor.
Download or read book Flow Induced Alignment in Composite Materials written by T.D. Papathanasiou and published by Woodhead Publishing. This book was released on 2021-10-19 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of aligning short fibers in a fiber-reinforced material is to improve the mechanical properties of the resulting composite. Aligning the fibers, generally in a preferred direction, allows them to contribute as much as possible to reinforcing the material. The first edition of this book detailed, in a single volume, the science, processing, applications, characterization and properties of composite materials reinforced with short fibers that have been orientated in a preferred direction by flows arising during processing. The technology of fiber-reinforced composites is continually evolving and this new edition provides timely and much needed information about this important class of engineering materials. Each of the original chapters have been brought fully up-to-date and new developments such as: the advent of nano-composites and the issues relating to their alignment; the wider use of long-fiber composites and the appearance of models able to capture their orientation during flow; the wider use of flows in micro-channels in the context of composites fabrication; and the increase in computing power, which has made relevant simulations (especially coupling flow kinematics to fiber content and orientation) much easier to perform are all covered in detail. The book will be an essential up-to-date reference resource for materials scientists, students, and engineers who are working in the relevant areas of particulate composites, short fiber-reinforced composites or nanocomposites. - Presents recent progress on flow-induced alignment, modelling and design of fiber and particulate filled polymer composites - Discusses important advances such as alignment of CNTs in polymer nanocomposites and molecular alignment of polymers induced by the injection molding process in the presence of fillers such as short fibers - Presents fiber interaction/diffusion modelling and also the fiber flexure/breakage models
Download or read book The AUN SEED Net Joint Regional Conference in Transportation Energy and Mechanical Manufacturing Engineering written by Anh-Tuan Le and published by Springer Nature. This book was released on 2022-05-31 with total page 1402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (The AUN/SEED-Net Joint Regional Conference in Transportation, Energy, and Mechanical Manufacturing Engineering) gathers selected papers submitted to the 14th Regional Conference in Energy Engineering and the 13th Regional Conference in Mechanical Manufacturing Engineering in the fields related to intelligent equipment, automotive engineering, mechanical systems and sustainable manufacturing, renewable energy, heat and mass transfer. Under the theme of “Integration and Innovation for Sustainable Development,” This book consists of papers in the aforementioned fields presented by researchers and scientists from universities, research institutes, and industry showcasing their latest findings and discussions with an emphasis on innovations and developments in embracing the new norm, resulting from the COVID-19 pandemic.
Download or read book Moldflow Design Guide written by Jay Shoemaker and published by Hanser Publications. This book was released on 2006 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: The origins of this book not only include Moldflow Design Principles, but also includes Warpage Design Principles published by Moldflow, and C-Mold Design Guide. Collectively, these documents are based on years of experience in the research, theory and practice of injection molding. These documents are now combined into one book, the Moldflow Design Principles. This book is intended to help practicing engineers solve problems they encounter frequently in the design of parts and molds, as will as during production. This book can also be used as a reference for training purpose at industrial, as well as educational institutions.
Download or read book Successful Injection Molding written by John P. Beaumont and published by Hanser Gardner Publications. This book was released on 2002 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book simultaneously addresses the subjects of successful molded product development and the practical application of injection molding simulation in this process. A strong emphasis is placed on establishing a clear understanding of the complex interaction between materials, process, mold design and part design, and how injection simulation can be used to evaluate this interaction.
Download or read book Numerical Simulation in Fluid Dynamics written by Michael Griebel and published by SIAM. This book was released on 1998-01-01 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this translation of the German edition, the authors provide insight into the numerical simulation of fluid flow. Using a simple numerical method as an expository example, the individual steps of scientific computing are presented: the derivation of the mathematical model; the discretization of the model equations; the development of algorithms; parallelization; and visualization of the computed data. In addition to the treatment of the basic equations for modeling laminar, transient flow of viscous, incompressible fluids - the Navier-Stokes equations - the authors look at the simulation of free surface flows; energy and chemical transport; and turbulence. Readers are enabled to write their own flow simulation program from scratch. The variety of applications is shown in several simulation results, including 92 black-and-white and 18 color illustrations. After reading this book, readers should be able to understand more enhanced algorithms of computational fluid dynamics and apply their new knowledge to other scientific fields.
