Download or read book Modification of Polymers written by Charles E. Carraher and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sheer volume of topics which could have been included under our general title prompted us to make some rather arbitrary decisions about content. Modification by irradiation is not included because the activity in this area is being treated elsewhere. We have chosen to emphasize chemical routes to modification and have striven to pre sent as balanced a representation of current activity as time and page count permit. Industrial applications, both real and potential, are included. Where appropriate, we have encouraged the contributors to include review material to help provide the reader with adequate context. The initial chapter is a review from a historical perspective of polymer modification and contains an extensive bibliography. The remainder of the book is divided into four general areas: Reactions and Preparation of Copolymers Reactions and Preparation of Block and Graft Copolymers Modification Through Condensation Reactions Applications The chemical modification of homopolymers such as polyvinylchlo ride, polyethylene, poly(chloroalkylene sulfides), polysulfones, poly chloromethylstyrene, polyisobutylene, polysodium acrylate, polyvinyl alcohol, polyvinyl chloroformate, sulfonated polystyrene; block and graft copolymers such as poly(styrene-block-ethylene-co-butylene block-styrene), poly(I,4-polybutadiene-block ethylene oxide), star chlorine-telechelic polyisobutylene, poly(isobutylene-co-2,3-dimethyl- 1,3-butadiene), poly(styrene-co-N-butylmethacrylate); cellulose, dex tran and inulin, is described.
Download or read book Modification of Polymer Properties written by Carlos Federico Jasso-Gastinel and published by William Andrew. This book was released on 2016-09-14 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modification of Polymer Properties provides, for the first time, in one title, the latest information on gradient IPNs and gradient copolymers. The book covers the broad range of polymer modification routes in a fresh, current view representing a timely addition to the technical literature of this important area. Historically, blends, copolymers, or filled polymers have been developed to meet specific properties, or to optimize the cost/properties relationship. Using the gradient structure approach with conventional radical polymerization, it has been shown that it is possible to optimize properties if appropriate gradients in the composition of copolymer chains are obtained. An overview of the gradient structure approach for designing polymers has not appeared in the recent literature and this title covers the different methods used to modify properties, offering the whole range of ways to modify polymers in just one volume and making this an attractive option for a wide audience of practitioners. The approach for each chapter is to explain the fundamental principles of preparation, cover properties modification, describe future research and applications as examples of materials that may be prepared for specific applications, or that are already in use, in present day applications. The book is for readers that have a basic background in polymer science, as well as those interested in the different ways to combine or modify polymer properties. Provides an integrated view on how to modify polymer properties Presents the entire panorama of polymer properties modification in one reference, covering the essential information in each topic Includes the optimization of properties using gradients in polymers composition or structure
Download or read book Polymer Modification written by John Meister and published by CRC Press. This book was released on 2000-07-25 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Describes new modification methods and applications for natural, synthetic, thermoplastic, and thermoset polymers that result from economic forces, commercial processes, and the latest research and development. Features chemical and physical technologies such as sulfonation, alkylation, acid/base hydrolysis, hydrogenation, stress orienting, annealing, crystallization, and more."
Download or read book Polymer Modification written by Graham G. Swift and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of an ACS-PMSE Division Symposium held in Orlando, Florida, August 21-25, 1996
Download or read book Plasma Surface Modification of Polymers Relevance to Adhesion written by Kash L. Mittal and published by CRC Press. This book was released on 2014-04-29 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of invited papers (previously published in special issues of the Journal of Adhesion Science and Technology) written by internationally recognized researchers actively working in the field of plasma surface modification. It provides a current, comprehensive overview of the plasma treatment of polymers. In contrast to plasm
Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.
Download or read book Reactive Modifiers for Polymers written by S. Al-Malaika and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical modification of polymers by reactive modifiers is no longer an academic curiosity but a commercial reality that has delivered a diverse range of speciality materials for niche markets: reactively grafted styrenic alloys, maleated polyolefins, super-tough nylons, silane modified and moisture-cured polyolefins, and thermoplastic elastomers, are but few exam ples of commercial successes. Although the approach of reactive modification of polymers has been largely achieved either in solution or in the solid state (through in situ reactions in polymer melts), it is the latter route that has attracted most attention in the last two decades owing to its flexibility and cost-effective ness. This route, referred to as reactive processing, focuses on the use of suitable reactive modifier(s) and the adoption of conventional polymer processing machinery, an extruder or a mixer, as a chemical reactor, to perform in situ targeted reactions for chemical modification of preformed polymers. This relatively simple, though scientifically highly challenging, approach to reactive modification offers unique opportunities in exploiting various reactive modifiers for the purpose of altering and transforming in a controlled manner the properties of preformed commercial polymers into new/speciality materials with tailor-made properties and custom-designed performance for target applications. Such an economically attractive route constitutes a radical diversion away from the traditional practices of manufacturing new polymers from monomers which involves massive in vestments in sophisticated technologies and chemical plants.
Download or read book Functional Polymers by Post Polymerization Modification written by Patrick Theato and published by John Wiley & Sons. This book was released on 2013-02-12 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: In modern polymer science a variety of polymerization methods for the direct synthesis of polymers bearing functional groups are known. However, there is still a large number of functional groups that may either completely prevent polymerization or lead to side reactions. Post-polymerization modification, also known as polymer-analogous modification, is an alternative approach to overcome these limitations. It is based on the polymerization of monomers with functional groups that are inert towards the polymerization conditions but allow a quantitative conversion in a subsequent reaction step yielding a broad range of other functional groups. Thus, diverse libraries of functional polymers with identical average degrees of polymerization but variable side chain functionality may easily be generated. Filling the gap for a book dealing with synthetic strategies and recent developments, this volume provides a comprehensive and up-to-date overview of the field of post-polymerization modification. As such, the international team of expert authors covers a wide range of topics, including new synthetic techniques utilizing different reactive groups for post-polymerization modifications with examples ranging from modification of biomimetic and biological polymers to modification of surfaces. With its guidelines this is an indispensable and interdisciplinary reference for scientists working in both academic and industrial polymer research.
Download or read book Polymer Surfaces and Interfaces written by Manfred Stamm and published by Springer Science & Business Media. This book was released on 2008-01-26 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: In what is an extremely practical and applicable new work, experts provide concise explanations, with examples and illustrations, of the key techniques in this important field. In each case, after basic principles have been reviewed, applications of the experimental techniques are discussed and illustrated with specific examples. Scientists and engineers in research and development will benefit from an application-oriented book that helps them to find solutions to both fundamental and applied problems. They will know that the surfaces and interfaces of polymers play an important role in most of the application areas of polymers, from moulds, foils, and composites, to biomaterials and applications in micro- and nanotechnology.
Download or read book Surface Modification of Polymeric Biomaterials written by Buddy D. Ratner and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of synthetic materials in medicine date back over 4000 year2. The Egyptians used linen as sutures. In the Roman Empire, gold was used in dentistry. Perhaps even earlier, ivory and bone may have been used in the body by practitioners of the healing arts. The historical origins of modem biomaterials science are also hard to precisely trace, but many of the ideas that define biomaterials as we know them today evolved in the late 1950s and early 1960s. Surface modification technology has played a prominent role in biomaterials science, and has paralleled the evolution of the modem field. In a symposium organized by the Artifical Heart Program of the NIH National Heart Institute and the Artificial Kidney program of the NIH National Institute of Arthritis and Metabolic Diseases, held in Atlantic City, New Jersey, in 1968, there were already a number of presentations on surface modification. Surface characterization at that time included scanning electron microscopy, ellipsometry, contact angle methods, and infrared internal reflection methods.
Download or read book Chemical Modification of Biological Polymers written by Roger L. Lundblad and published by CRC Press. This book was released on 2011-09-13 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examining the chemical modification of biological polymers and the emerging applications of this technology, Chemical Modification of Biological Polymers reflects the change in emphasis in this subsection of biotechnology from the study of protein structure and function toward applications in therapeutics and diagnostics. Highlights The basic organic chemistry of the modification proteins, nucleic acids, oligosaccharides, polysaccharides, and their applications New analytical technologies used to characterize the chemical modification of biological polymers Identification of in vivo, non-enzymatic chemical modification of biological polymers Specific chemical modifications to generate biopharmaceutical products This book covers the basics on the organic chemistry underlying the chemical modification of biopolymers, including updates on the use of various chemical reagents. It describes the current status of chemical modification of biological polymers and emerging applications of this technology in biotechnology. These technologies are important for the manufacture of conjugate proteins used in drug delivery, for the preparation of nucleic acid microarrays, and for the preparation of hydrogels and other materials used in tissue engineering.
Download or read book Polymer Surface Modification Relevance to Adhesion Volume 3 written by Kash L. Mittal and published by CRC Press. This book was released on 2004-08-26 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book documents the proceedings of the Fourth International Symposium on Polymer Surface Modification: Relevance to Adhesion held under the auspices of MST Conferences, LLC in Orlando, FL, June 9-11, 2003.Polymers are used for a variety of purposes in a host of technological applications and even a cursory look at the literature will evince tha
Download or read book Polymer Modified Bitumen written by Tony McNally and published by Elsevier. This book was released on 2011-09-15 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The addition of polymers to bitumen allows the modification of certain physical properties, such as softening point, brittleness and ductility, of the bitumen. Polymer modified bitumen: Properties and characterisation provides a valuable and in-depth coverage of the science and technology of polymer modified bitumen. After an initial introduction to bitumen and polymer modified bitumen, the book is divided into two parts. Chapters in part one focus on the preparation and properties of a range of polymer modified bitumen, including polymer bitumen emulsions, modification of bitumen with poly (urethanes), waste rubber and plastic and polypropylene fibres. Part two addresses the characterisation and properties of polymer modified bitumen. Chapter topics covered include rheology, simulated and actual long term ageing studies; the solubility of bituminous binders in fuels and the use of Fourier transform infrared spectroscopy to study ageing/oxidation of polymer modified bitumen. Polymer modified bitumen is an essential reference for scientists and engineers, from both academia and the civil engineering and transport industries, interested in the properties and characterisation of polymer modified bitumen. Provides a comprehensive and in-depth coverage of the science and technology of polymer modified bitumen Focuses on the preparation and properties of a range of polymer modified bitumen, including emulsions, modification of bitumen with poly(urethanes), waste rubber and plastic as well as polypropylene fibres Addresses the characterization and properties of polymer modified bitumen, including rheology, simulated and actual long term ageing studies, and the solubility of bituminous binders in fuels
Download or read book Atmospheric Pressure Plasma Treatment of Polymers written by Michael Thomas and published by John Wiley & Sons. This book was released on 2013-06-19 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: An indispensable volume detailing the current and potential applications of atmospheric pressure plasma treatment by experts practicing in fields around the world Polymers are used in a wide variety of industries to fabricate legions of products because of their many desirable traits. However, polymers in general (and polyolefins, in particular) are innately not very adhesionable because of the absence of polar or reactive groups on their surfaces and concomitant low surface energy. Surface treatment of polymers, however, is essential to impart reactive chemical groups on their surfaces to enhance their adhesion characteristic. Proper surface treatment can endow polymers with improved adhesion without affecting the bulk properties. A plethora of techniques (ranging from wet to dry, simple to sophisticated, vacuum to non-vacuum) for polymer surface modification have been documented in the literature but the Atmospheric Pressure Plasma (APP) treatment has attracted much attention because it offers many advantages vis-a-vis other techniques, namely uniform treatment, continuous operation, no need for vacuum, simplicity, low cost, no environmental or disposal concern, and applicability to large area samples. Although the emphasis in this book is on the utility of APP treatment for enhancement of polymer adhesion, APP is also applicable and effective to modulate many other surface properties of polymers: superhydrophilicity, superhydrophobicity, anti-fouling, anti-fogging, anti-icing, cell adhesion, biocompatibility, tribological behavior, etc. The key features of Atmospheric Pressure Plasma Treatment of Polymers: Address design and functions of various types of reactors Bring out current and potential applications of APP treatment Represent the cumulative wisdom of many key academic and industry researchers actively engaged in this key and enabling technology
Download or read book Handbook of Polymer Synthesis Characterization and Processing written by Enrique Saldivar-Guerra and published by John Wiley & Sons. This book was released on 2013-02-28 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a broad range of polymer science topics, Handbook of Polymer Synthesis, Characterization, and Processing provides polymer industry professionals and researchers in polymer science and technology with a single, comprehensive handbook summarizing all aspects involved in the polymer production chain. The handbook focuses on industrially important polymers, analytical techniques, and formulation methods, with chapters covering step-growth, radical, and co-polymerization, crosslinking and grafting, reaction engineering, advanced technology applications, including conjugated, dendritic, and nanomaterial polymers and emulsions, and characterization methods, including spectroscopy, light scattering, and microscopy.
Download or read book Plasma Surface Modification and Plasma Polymerization written by Norihiro Inagaki and published by CRC Press. This book was released on 2014-07-22 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: In current materials R&D, high priority is given to surface modification techniques to achieve improved surface properties for specific applications requirements. Plasma treatment and polymerization are important technologies for this purpose. This book provides a basic and thorough presentation of this subject. This is probably the first book to cover plasma treatment and polymerization for the purpose of surface modification. Chemistry, processes and applications are detailed. More than 150 figures include numerous schematics which illustrate the chemistry and processes. More than 100 tables and graphics provide useful reference data in convenient form.
Download or read book Polymer Surface Modification written by K. L. Mittal and published by BRILL. This book was released on 2009-02-28 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of polymer surface modification is of tremendous contemporary interest because of its critical importance in many and varied technological applications where polymers are used. Currently there is brisk research activity in unraveling the mechanisms of surface modification and finding ways to prolong the life of surface treatment. Also there is acute interest and need to devise new, improved and economical means to modify polymer surfaces. This book is divided into three parts as follows: Part 1: Surface Modification Techniques; Part 2: Interfacial Aspects and Adhesion; Part 3: General Papers. The topics covered include: various techniques for surface modification including plasma (both vacuum and atmospheric pressure), ozone, photografting, UV photo-oxidation, laser, use of charged particles and others for a variety of polymers; longevity of surface treatment; hydrophobic recovery; fabrication of high-density polymer nano-dots; immobilization of organometallic catalysts on textile carrier materials; polymer membrane antifouling properties; electroless metallization of polymers; effects of surface modification on interfacial shear strength of composites, cord/rubber adhesion, adhesion of UV-curable coatings and attachment of hyperbranched polymers; plasma polymerization; block copolymers; application of plasma technology in decontamination of heat-sensitive polymer surfaces. In essence this book reflects the current state-of-the-knowledge in the arena and represents the work of many renowned scientists and technologists. It should be of interest to anyone with a desire or need to learn the latest R&D activity in this domain and the information contained here should be very valuable in deciding the optimum surface modification technique for his/her particular requirements.
