Download or read book Modern Metallography written by R. E. Smallman and published by Elsevier. This book was released on 2013-10-22 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Metallography focuses on the defects in the properties of metals, such as precipitates, cracks, grain boundaries, dislocations, stacking faults, and impurity atoms. The publication first offers information on reflected light microscopy and high temperature microscopy. Discussions focus on specimen preparation, defects of lenses, methods of increasing the resolving power of an objective, long working distance objectives, and typical hot-stage experiments. The text then elaborates on surface topography and polarizing microscope, including oblique illumination, interferometry, examination of anisotropic surfaces, and other uses of polarized light microscopy. The text takes a look at X-ray metallography and specialized X-ray diffraction techniques. Topics include Laue method and orientation, structure factor, powder method and the accurate measurement of lattice parameters, Bragg law, sheet textures, and preferred orientation. The publication further elaborates on electron microscopy and metallography at the atomic level. The manuscript is a valuable reference for students and readers interested in modern metallography.
Download or read book Applications of Modern Metallographic Techniques written by American Society for Metals and published by ASTM International. This book was released on 1970 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Metallography in Archaeology and Art written by David A. Scott and published by Springer Nature. This book was released on 2019-08-30 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the metallographic study of ancient metals. Metallography is important both conceptually as a microstructural science and in terms of its application to the study of ancient and historic metals. Metallography is a well-established methodology for the characterization of the microstructure of metals, which continues to be significant today in quality control and characterization of metallic properties. Not only does the metallographic examination of ancient metals present its own challenges in terms of sample size and interpretation of evidence, but it must be integrated with archaeological data and cultural research in order to obtain the most meaningful results. Issues of authentication and the establishment of fakes and forgeries of metallic artefacts often involve metallographic evidence of both metal and patina or corrosion interface, as an essential component of such a study. The present volume sets out the basic features of relevant metallic systems, enhanced with a series of examples of typical microstructural types, with illustrative case studies and examples throughout the text derived from studies undertaken by the two authors. This book provides a comprehensive presentation of metallography for archaeologists, archaeometallurgists, conservators, conservation scientists and metallurgists of modern materials.
Download or read book Metallography past Present and Future written by George F. Vander Voort and published by ASTM International. This book was released on 1993 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metallographic Etching 2nd Edition written by G. Petzow and published by ASM International. This book was released on 1999-01-01 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: An English translation of the 1994 second edition, this book is an outstanding source of etchants of all types, and electrolytic polishing solutions used by metallographers to reveal the structure of nearly any material ever prepared and examined. The introductory text on specimen preparation and theory of etching has been expanded and updated to cover all common procedures as well as some infrequently used methods. Safety procedures and precautions is a valuable addition as well.
Download or read book Fifty Years of Progress in Metallographic Techniques written by American Society for Testing and Materials Annual Meeting and published by ASTM International. This book was released on 1968 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reconciling Art and Technology written by Subrata Dasgupta and published by Taylor & Francis. This book was released on 2024-05-14 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines two venerable cultures, art and technology, and uses the young "interdiscipline" of cognitive history combined with case studies of both ancient and modern artifacts to explore, and unveil, some of the bridges by which this reconciliation of two seemingly distant and oppositional cultures can be effected. Art and technology are commonly regarded as oppositional. While both are concerned with made things – artifacts – and both have their origins in pre-literate antiquity, the primary purposes they are intended for are quite distinct: the artifacts of technology serve utilitarian purposes while those of art serve affective needs. This opposition between art and technology, notably argued by such scholars as Lewis Mumford and George Kubler is challenged in this book. For, when we consider art and technology as creative phenomena, then many significant, interesting, and often subtle commonalities emerge whereby a reconciliation – a unity – of these two great cultures seems possible. This book utilizes case studies of both ancient and modern artifacts – ranging from the Nataraja sculpture of ancient India, a great astronomical clock of ancient China, and Japanese Samurai swordmaking, through Gothic cathedrals and Renaissance paintings of Europe to English Elizabethan machinery to the French Impressionists to modernist concrete structures and paintings in both East and West. This book will be of interest to students and professional scholars interested in the histories of art and technology, cultural history, and creativity studies.
Download or read book Metallurgical Microscopy written by Helfrid Modin and published by Elsevier. This book was released on 2016-01-22 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metallurgical Microscopy provides the general principles, methods, and techniques in metallurgical microscopy. The book initially provides the techniques for specimen preparation for macroscopic and microscopic examination. Subsequent chapters are devoted to the discussion of light-optical microscopy and photography, interferometry and contrast-raising methods, and microhardness measurement. Topics on high-temperature microscopy, a brief review of the electron microprobe and its applications, and the construction, properties and applications of the electron microscope are presented as well. Metallurgists and materials scientists will find the book very informative and useful.
Download or read book Metallurgy written by W.H. Dennis and published by Routledge. This book was released on 2017-07-12 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world's output of metals during the 100 year period of 1863-1963 was greater than in all the previous years of man's history. In the nineteenth century the only metals available to industry were cast and wrought iron and a few non-ferrous metals and their alloys; by the latter part of the twentieth century, steel and aluminum dominated the world, and metals that were mere laboratory curiosities provided the basis for the technology of nuclear energy and space travel. This book records the extraordinary history of metallurgical progress, in which metal art was replaced by metal science. It remains a classic work on the subject. The book begins with an introductory chapter that surveys the entire field to be covered, and follows with eight chapters each dealing with progress in one of the major branches of the metallurgical industry: ore dressing, pyrometallurgy, iron and steel, the major non-ferrous metals, new metals (such as uranium, germanium and cobalt), precious metals, the shaping of metals, and metallography. The book reviews developments in all countries, but American practice - which led the world - is given special prominence. A glossary of metallurgical terms and full name and subject indexes are included. The book is a basic reference work as well as an absorbing history of an important aspect of man's technological progress.
Download or read book Metal Cutting Mechanics written by Viktor P. Astakhov and published by CRC Press. This book was released on 1998-12-22 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Cutting Mechanics outlines the fundamentals of metal cutting analysis, reducing the extent of empirical approaches to the problems as well as bridging the gap between design and manufacture. The author distinguishes his work from other works through these aspects: considering the system engineering of the cutting process identifying the singularity of the cutting process among other closely related manufacturing processes by chip formation, caused by bending and shear stresses in the deformation zone suggesting a distinctive way toward predictability of the metal cutting process devoting special attention to experimental methodology Metal Cutting Mechanics provides an exceptional balance between general reading and research analysis, presenting industrial and academic requirements in terms of basic scientific factors as well as application potential.
Download or read book Metallography as a Quality Control Tool written by Mccall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Qual ity control has been described as a system for verifying and maintaining a desired level of quality in a product or process by careful planning, continued inspec tion, and corrective action where required. With many of today's products, there is an ever increasing demand for improved reliability during service. This in turn ne cessitates the use of a wide range of control techniques - some very sophisticated and complex - not only to verify the quality of the final product but also to moni tor that the fabrication processes are under control. Furthermore, with certain in dustries, quality control of the final product is of paramount importance because of the needs for its reliable and safe operation under arduous and sometimes dangerous conditions. Metallography often serves as an invaluable quality control tool and can provide information not normally attainable by more conventional procedures. It often supplements both destructive techniques, e. g. , mechanical testing, as well as non-destructive procedures, e. g. , as radiography, ultrasonic testing, and dye-penetrant inspection. Furthermore, metallographic inspection utilizes a wide range of tech niques ranging from conventional optical microscopy to more sophisticated procedures such as scanning electron microscopy, X-ray spectroscopy, and Auger electron spec troscopy. In some industries, metallography also is employed during maintenance, field inspection, and overhaul of components.
Download or read book Metallurgical Design and Industry written by Brett Kaufman and published by Springer. This book was released on 2018-11-19 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume examines metallurgical technologies and their place in society throughout the centuries. The authors discuss metal alloys and the use of raw mineral resources as well as fabrication of engineered alloys for a variety of applications. The applications covered in depth include financial, mining and smelting, bridges, armor, aircraft, and power generation. The authors detail the multiple levels and scales of impact that metallurgical advances have had and continue to have on society. They include case studies with guidance for future research design and innovation of metallic materials relevant to societal needs. Includes case studies written by industry professionals with guidance for future research design and innovation; Demonstrates metal materials design that reflects relevant societal needs; Covers a broad range of applied materials used in aircraft, armor, bridges, and power generation, among others.
Download or read book Interpretation of Metallographic Structures written by James Dvorak and published by Elsevier. This book was released on 2012-12-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interpretation of Metallographic Structures, Second Edition describes the features of metallographic structures using an optical reflection microscope. This book is divided into six chapters and starts with an examination of the polycrystalline structures, subgrain boundaries, and an overview of cold and hot working, as well as recrystallization and grain growth. The next chapter explores the metallography of fracture, which involves visual inspection, low-power stereoptic light microscopy, polished-section light-reflection microscopy, and the scanning electron microscope. This topic is followed by discussions of the different types of crystallizations, the mechanism of solid-state transformation, and the diffusion and other transport processes. The last chapter involves the measurement aspects in metallography, including measurement of grain and particles sizes, as well as their distribution. This book is intended primarily to metallurgists and researchers.
Download or read book Interpretation of Metallographic Structures written by William Rostoker and published by Elsevier. This book was released on 2012-12-02 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interpretation of Metallographic Structures, Third Edition, is concerned with metallography as a metallurgical tool. It is an organized presentation of specimen microstructures, each chosen for its clarity of illustration and each or in groups forming the pretext for discussions of the interrelation between physical metallurgy and metallography. The focus is on structures characteristic in a physical metallurgy sense, with the purpose of demonstrating that logical framework of interpretation can supplant mental storage of infinite variations. The book contains seven chapters and begins with a discussion of polycrystalline structures. This is followed by separate chapters on the metallography of fracture; crystallization processes including dendritic crystallization, peritectic crystallization, and metastable crystallization; solid state transformations; diffusion and transport processes; procedures for measuring metallographic features; and energy dispersive spectography. This book is directed toward the senior student as a preview of the scope of his subject and to the practicing metallurgist as a reintroduction.
Download or read book Metallographic Specimen Preparation written by J. McCall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: /.letallography is much more than taking striking pictures at high magnifications or polishing and etching specimens in such a way that no scratches can be seen. Basically, metallography is the physical metallurgist's most useful and most used tool for studying metals. Although it is perhaps his oldest tool, it certainly is not likely to become obsolete. Rather, the continued demands that have been placed upon materials have required more detailed charac terizations of their microstructures and this, in turn, has re quired the metallographer to develop new techniques to make these characterizations. Not too many years ago, the metallographer had only optical microscopes with which to examine his specimens. Now he has elec tron microscopes, scanning electron microscopes, and a whole host of instruments which were unknown to him only a relatively few years ago. This has forced him to learn not only how to use these new instruments and how to interpret the information that they provide but it also has made him develop new techniques for preparing the samples for examination.
Download or read book EARLY METALLURGY IN NIGERIA written by Adeniyi A. Afonja and published by ChudacePublishing. This book was released on with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humankind is believed to have existed in Africa for over 6 million years, based on the dating of excavated fossils. Transformations took place over time in response to severe climate changes and the Modern Human, believed to be the first to spread beyond Africa evolved only about 2 million years ago and did not move to other parts of the world until about 200,000 years ago. What is now known about ancient human history came from several sources: paleontologists excavate and evaluate human and article fossils dating back 2-3 million years; archaeologists excavate ancient sites and study recovered articles, mostly dating back 40-60,000 years; historians study oral and recorded history but the scope is limited to about 3,000 years when writing was invented. Archaeometallurgy evolved in the second half of the last century and has become a major tool for the study of ancient metals, metalworking structures, tools, waste products and finished artifacts, using techniques from the physical sciences. While this does not in anyway distract from the traditional approach of other archaeo-scientists, it is a very valuable complement, since it provides in-depth information about ore and slag composition, furnace design, macro and micro analysis of objects, all of which give vital information about the probable production techniques. Materials have played a central role throughout human history, starting with stone, flint, wood, straw, and transitioning to metals around ten to twelve thousand years ago. In fact the major stages of historical evolution are delineated by the materials that were in prominent use: Stone Age; Bronze Age; Iron Age, etc. If Africa is indeed the cradle of humankind, then it should have a very rich archaeo-history but most of the discoveries so far have been accidental. This book presents the results of a comprehensive study of the rich early archeometallurgical history of Nigeria which dates back to around 800 BC, in the context of early world metallurgy. Issues treated include probable socio/ethno cultural settings, practices in the context of early world metal cultures, provenance of technologies, and local technological innovations.
