Download or read book Modern Manufacturing Processes written by Kaushik Kumar and published by Woodhead Publishing. This book was released on 2020-05-22 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Manufacturing Processes draws on the latest international research on traditional and non-traditional practices, to provide valuable advice on the digitization and automation of the manufacturing industry. In addition to providing technical details for the correct implementation of the latest tools and practices, the impacts on productivity and design quality are also examined. The thorough classification of manufacturing processes will help readers to decide which technology is most effective for their requirements, and comparisons between modern and traditional methods will clarify the case for upgrading. This comprehensive assessment of technologies will include additive manufacturing, and industry 4.0, as well as hybrid methods where exceptional results have been gained through the use of traditional technology. This collection of work by academics at the cutting edge of manufacturing research will help readers from a range of backgrounds to understand and apply these new technologies. - Explains how the correct implementation of modern manufacturing processes can help a factory gain the characteristics of an industry 4.0 business - Explores what the main technical and business drivers for new manufacturing processes are today - Provides detailed classifications and comparisons of traditional, non-traditional, and hybrid manufacturing processes

Download or read book Modern Manufacturing Volume 1 written by Michelle Segrest and published by Independently Published. This book was released on 2020-01-16 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first in the Modern Manufacturing Case Studies series of three books.Since 2008, Michelle Segrest has been touring manufacturing facilities worldwide for major industry trade publications. She has toured more than 75 manufacturing facilities in 12 countries on three continents. Each plant made a memorable impression. This three-volume ebook series about modern manufacturing showcases the 30 factories that she felt had the most compelling stories to tell about innovation, efficiency, and reliability-with a glimpse of what the future of manufacturing looks like. Michelle shares her first-hand experiences touring manufacturing facilities worldwide, delivering the lessons learned from the best practices of industry champions. Innovations like additive technology and strategic facility design are changing the face of modern manufacturing. The first in the series, Modern Manufacturing Volume 1-Best Practices from Industry Champions covers the impact of the industrial internet of things (IIoT) and how big and small companies incorporate bright ideas and simple strategies to boost their overall plant performance, increase efficiency, and improve reliability. This ebook includes real-world case studies from worldwide industry champions General Electric, Festo, Eli Lilly and Company, Gulf Coast Electric Motor Service, Inc., Hydro, Inc, Mercedes Benz, Palm Beach Zoo & Conservation Society, Reliance Industries Limited, Rivertown Brewery & Barrel House, and Uponor North America. Each chapter offers key tips and takeaways from the experiences of these companies and their methods to continuously improve operations. This volume explores best practices and tools like artificial intelligence, condition-based monitoring, in-house equipment testing, sophisticated power systems, computerized maintenance management software, culture change, drones, and advanced automation. Each chapter is a detailed case study which can be easily read in one sitting and provides a comprehensive account of how these world-class facilities use game-changing methods to improve plant operations. Each case study also includes key tips and takeaways that can be used in any plant, in any industry. Foreword by Yannick Schilly, President and CEO of Altix Consulting, Inc. Coming Soon: MODERN MANUFACTURING (Volume 2)Real-World Stories from the Plant FloorThe second installment in this three-volume series explores new ways modern manufacturers are using drones to monitor and analyze big data and demonstrates how pilot plants remove the risk from huge expansions and new projects, saving money and enhancing facility performance. Modern Manufacturing (Volume 2)-Real-World Stories from the Plant Floor also includes detailed case studies from worldwide industry champions Industrial Skyworks, Reliance Industries Limited, EPIC Systems, Zeton, Inc., DuPont, Alpen High Performance Products, AstraZeneca, Draper, Inc, Festo, Greenheck, Linetec, Styrotek, and Uponor North America. MODERN MANUFACTURING (Volume 3)An Inside Look into Game-Changing ProcessesThe finale of this three-volume series demonstrates how augmented reality connects humans and machines to drive the future of modern manufacturing. Modern Manufacturing (Volume 3)-An Inside Look into Game-Changing Processes also includes real-world case studies from worldwide industry champions PTC, Gravity Jack, Inc., ACH Foam Technologies, Aquatherm, CountryMark, Dana Incorporated, Empire Level, Frito-Lay, Ideal Industries, Kreinik Manufacturing, Co., and the Y12 National Security Complex.

Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-09-04 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.

Download or read book Fundamentals of Modern Manufacturing 2e Update Wit H Manufacturing Processes Sampler Dvd Set written by Groover and published by John Wiley & Sons Incorporated. This book was released on 2003-10 with total page 1020 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the increasing importance of ceramics, polymers, composites, and silicon in manufacturing, Fundamentals of Modern Manufacturing Second Edition provides a comprehensive treatment of these other materials and their processing, without sacrificing its solid coverage of metals and metal processing. Topics include such modern processes as rapid prototyping, microfabrication, high speed machining and nanofabrication. Additional features include: Emphasis on how material properties relate to the process variables in a given process. Emphasis on manufacturing science and quantitative engineering analysis of manufacturing processes. More than 500 quantitative problems are included as end of chapter exercises. Multiple choice quizzes in all but one chapter (approximately 500 questions). Coverage of electronics manufacturing, one of the most commercially important areas in today's technology oriented economy. Historical notes are included to introduce manufacturing from the earliest materials and processes, like woodworking, to the most recent.

Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Modern Approaches to Manufacturing Improvement written by Alan Robinson and published by Routledge. This book was released on 2017-11-01 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here's the quickest and most inexpensive way to learn about the pioneering work of Shigeo Shingo, co-creator (with Taiichi Ohno) of just-in-time. It's an introductory book containing excerpts of five of his classic books as well as an excellent introduction by Professor Robinson.

Download or read book Introduction to Advanced Manufacturing written by Ramy Harik and published by SAE International. This book was released on 2019-07-24 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Advanced Manufacturing was written by two experienced and passionate engineers whose mission is to make the subject of advanced manufacturing easy to understand and a practical solution to everyday problems. Harik, Ph.D. and Wuest, Ph.D., professors who have taught the subject for decades, combined their expertise to develop both an applied manual and a theoretical reference that addresses many different needs. Introduction to Advanced Manufacturing covers the following topics in detail: • Composites Manufacturing • Smart Manufacturing • Additive Manufacturing • Computer Aided Manufacturing • Polymers Manufacturing • Assembly Processes • Manufacturing Quality Control and Productivity • Subtractive Manufacturing • Deformative Manufacturing Introduction to Advanced Manufacturing offers a new, refreshing way of studying how things are made in the digital age. With academics and industry professionals in mind, Introduction to Advanced Manufacturing paves the ground for those interested in the new opportunities of Industry 4.0.

Download or read book Groover s Principles of Modern Manufacturing written by Mikell P. Groover and published by Wiley. This book was released on 2016-09-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: strong style="font-family: Arial; font-size: 13.3333px;"Groover's Principles of Modern Manufacturing, is designed for a first course or two-course sequence in Manufacturing at the junior level in Mechanical, Industrial, and Manufacturing Engineering curricula. As in preceding editions, the author's objective is to provide a treatment of manufacturing that is modern and quantitative. The book's modern approach is based on balanced coverage of the basic engineering materials, the inclusion of recently developed manufacturing processes and comprehensive coverage of electronics manufacturing technologies. The quantitative focus of the text is displayed in its emphasis on manufacturing science and its greater use of mathematical models and quantitative end-of-chapter problems.

Download or read book Modern Manufacturing Engineering written by J. Paulo Davim and published by Springer. This book was released on 2015-06-19 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent research and trends in Manufacturing Engineering. The chapters emphasize different aspects of the transformation from materials to products. It provides the reader with fundamental materials treatments and the integration of processes. Concepts such as green and lean manufacturing are also covered in this book.

Download or read book Advanced Micro and Nano manufacturing Technologies written by Shrikrishna Nandkishor Joshi and published by Springer Nature. This book was released on 2021-10-01 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the fundamentals and advancements in micro and nanomanufacturing technologies applied in the biomedical and biochemical domain. The contents of this volume provide comprehensive coverage of the physical principles of advanced manufacturing technologies and the know-how of their applications in the fabrication of biomedical devices and systems. The book begins by documenting the journey of miniaturization and micro-and nano-fabrication. It then delves into the fundamentals of various advanced technologies such as micro-wire moulding, 3D printing, lithography, imprinting, direct laser machining, and laser-induced plasma-assisted machining. It also covers laser-based technologies which are a promising option due to their flexibility, ease in control and application, high precision, and availability. These technologies can be employed to process several materials such as glass, polymers: polycarbonate, polydimethylsiloxane, polymethylmethacrylate, and metals such as stainless steel, which are commonly used in the fabrication of biomedical devices, such as microfluidic technology, optical and fiber-optic sensors, and electro-chemical bio-sensors. It also discusses advancements in various MEMS/NEMS based technologies and their applications in energy conversion and storage devices. The chapters are written by experts from the fields of micro- and nano-manufacturing, materials engineering, nano-biotechnology, and end-users such as clinicians, engineers, academicians of interdisciplinary background. This book will be a useful guide for academia and industry alike.

Download or read book Modern Manufacturing written by Marek B. Zaremba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturers worldwide are faced with unprecedented challenges from international competition, changing production processes and technologies, shorter production life-cycles, market globalization and environmental requirements. Fundamental to meeting these challenges is the understanding and control of information across all stages of the Computer Integrated Manufacturing (CIM) process. Modern Manufacturing presents the state of the art in the information-oriented aspects of CIM and Intelligent Manufacturing Systems. Particular emphasis is placed on the impact of new software engineering technologies, the object-oriented approach, database design, hierarchical control and intelligent systems. The contributions are written by experts from Europe and the USA.

Download or read book Design for Advanced Manufacturing Technologies and Processes written by LaRoux K. Gillespie and published by McGraw Hill Professional. This book was released on 2017-05-12 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge coverage of the new processes, materials, and technologies that are revolutionizing the manufacturing industry Expertly edited by a past president of the Society of Manufacturing Engineers, this state-of-the-art resource picks up where the bestselling Design for Manufacturability Handbook left off. Within its pages, readers will find detailed, clearly written coverage of the materials, technologies, and processes that have been developed and adopted in the manufacturing industry over the past sixteen years. More than this, the book also includes hard-to-find technical guidance and application information that can be used on the job to actually apply these cutting-edge processes and technologies in a real-world setting. Essential for manufacturing engineers and designers, Design for Advanced Manufacturing is enhanced by a host of international contributors, making the book a true global resource. • Information on the latest technologies and processes such as 3-D printing, nanotechnology, laser cutting, prototyping, additive manufacturing, and CAD/CAM software tools • Coverage of new materials including nano, smart, and shape-memory alloys, in steels, glass, plastics, and composites

Download or read book Manufacturing Processes for Advanced Composites written by Flake C Campbell Jr and published by Elsevier. This book was released on 2003-12-18 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: • One of very few books available to cover this subject area. • A practical book with a wealth of detail.This book covers the major manufacturing processes for polymer matrix composites with an emphasis on continuous fibre-reinforced composites. It covers the major fabrication processes in detail.Very few books cover the details of fabrication and assembly processes for composites. This book is intended for the engineer who wants to learn more about composite processing: any one with some experience in composites should be able to read it. The author, who has 34 years experience in the aerospace industry, has intentionally left out mathematical models for processes so the book will be readable by the general engineer. It differs from other books on composites manufacturing in focussing almost solely on manufacturing processes, while not attempting to cover materials, test methods, mechanical properties and other areas of composites.

Download or read book Manufacturing Hysteria written by Jay Feldman and published by Anchor. This book was released on 2012-11-13 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: A riveting and unsettling history of the assault on civil rights and liberties in America—from World War I to the War on Terror—by the acclaimed author of When the Mississippi Ran Backwards. In this ambitious and wide-ranging account, Jay Feldman takes us from the run-up to World War I and its anti-German hysteria to the September 11 attacks and Arizona’s current anti-immigration movement. What we see is a striking pattern of elected officials and private citizens alike using the American people’s fears and prejudices to isolate minorities (ethnic, racial, political, religious, or sexual), silence dissent, and stem the growth of civil rights and liberties. Rather than treating this history as a series of discrete moments, Feldman considers the entire programmatic sweep on a scale no one has yet approached. In doing so, he gives us a potent reminder of how, even in America, democracy and civil liberties are never guaranteed.

Download or read book Additive Manufacturing written by Juan Pou and published by Elsevier. This book was released on 2021-05-21 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing explains the background theory, working principles, technical specifications, and latest developments in a wide range of additive manufacturing techniques. Topics addressed include treatments of manufactured parts, surface characterization, and the effects of surface treatments on mechanical behavior. Many different perspectives are covered, including design aspects, technologies, materials and sustainability. Experts in both academia and industry contribute to this comprehensive guide, combining theoretical developments with practical improvements from R&D. This unique guide allows readers to compare the characteristics of different processes, understand how they work, and provide parameters for their effective implementation. This book is part of a four-volume set entitled Handbooks in Advanced Manufacturing. Other titles in the set include Advanced Machining and Finishing, Advanced Welding and Deformation, and Sustainable Manufacturing Processes. - Provides theory, operational parameters, and latest developments in 20 different additive manufacturing processes - Includes contributions from experts in industry and academia with a wide range of disciplinary backgrounds, providing a comprehensive survey of this diverse and influential subject - Includes case studies of innovative additive manufacturing practices from industry

Download or read book Introduction to Manufacturing Processes and Materials written by Robert Creese and published by CRC Press. This book was released on 2017-12-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first manufacturing book to examine time-based break-even analysis, this landmark reference/text applies cost analysis to a variety of industrial processes, employing a new, problem-based approach to manufacturing procedures, materials, and management. An Introduction to Manufacturing Processes and Materials integrates analysis of material costs and process costs, yielding a realistic, effective approach to planning and executing efficient manufacturing schemes. It discusses tool engineering, particularly in terms of cost for press work, forming dies, and casting patterns, process parameters such as gating and riser design for casting, feeds, and more.

Download or read book Advanced Manufacturing Technology for Medical Applications written by Ian Gibson and published by John Wiley & Sons. This book was released on 2006-06-14 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced manufacturing technologies (AMTs) combine novel manufacturing techniques and machines with the application of information technology, microelectronics and new organizational practices within the manufacturing sector. They include "hard" technologies such as rapid prototyping, and "soft" technologies such as scanned point cloud data manipulation. AMTs contribute significantly to medical and biomedical engineering. The number of applications is rapidly increasing, with many important new products now under development. Advanced Manufacturing Technology for Medical Applications outlines the state of the art in advanced manufacturing technology and points to the future development of this exciting field. Early chapters look at actual medical applications already employing AMT, and progress to how reverse engineering allows users to create system solutions to medical problems. The authors also investigate how hard and soft systems are used to create these solutions ready for building. Applications follow where models are created using a variety of different techniques to suit different medical problems One of the first texts to be dedicated to the use of rapid prototyping, reverse engineering and associated software for medical applications Ties together the two distinct disciplines of engineering and medicine Features contributions from experts who are recognised pioneers in the use of these technologies for medical applications Includes work carried out in both a research and a commercial capacity, with representatives from 3 companies that are established as world leaders in the field – Medical Modelling, Materialise, & Anatomics Covers a comprehensive range of medical applications, from dentistry and surgery to neurosurgery and prosthetic design Medical practitioners interested in implementing new advanced methods will find Advanced Manufacturing Technology for Medical Applications invaluable as will engineers developing applications for the medical industry. Academics and researchers also now have a vital resource at their disposal.