Download or read book Modern Cold Spray written by Julio Villafuerte and published by Springer. This book was released on 2015-08-24 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the current state of the art of the novel cold spray process. Cold spray is a solid state metal consolidation process, which allows engineers to tailor surface and shape properties by optimizing process parameters, powder characteristics and substrate conditions for a wide variety of applications that are difficult or impossible by other techniques. Readers will benefit from this book's coverage of the commercial evolution of cold spray since the 1980's and will gain a practical understanding of what the technology has to offer.
Download or read book Advanced Surface Coating Techniques for Modern Industrial Applications written by Roy, Supriyo and published by IGI Global. This book was released on 2020-09-18 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: In engineering, there are often situations in which the material of the main component is unable to sustain long life or protect itself from adverse operating environments. Moreover, in some cases, different material properties such as anti-friction and wear, anti-corrosive, thermal resistive, super hydrophobic, etc. are required as per the operating conditions. If those bulk components are made of such materials and possess those properties, the cost will be very high. In such cases, a practical solution is surface coating, which serves as a protective barrier to the bulk material from the adverse environment. In the last decade, with enormous effort, researchers and scientists have developed suitable materials to overcome those unfavorable operating conditions, and they have used advanced deposition techniques to enhance the adhesion and surface texturing of the coatings. Advanced Surface Coating Techniques for Modern Industrial Applications is a highly sought reference source that compiles the recent research trends in these new and emerging surface coating materials, deposition techniques, properties of coated materials, and their applications in various engineering and industrial fields. The book particularly focuses on 1) coating materials including anti-corrosive materials and nanomaterials, 2) coating methods including thermal spray and electroless disposition, and 3) applications such as surface engineering and thin film application. The book is ideal for engineers, scientists, researchers, academicians, and students working in fields like material science, mechanical engineering, tribology, chemical and corrosion science, bio-medical engineering, biomaterials, and aerospace engineering.
Download or read book High Pressure Cold Spray written by C. M. Kay and published by . This book was released on 2016-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a highly practical and useful ""go-to"" resource that presents an in-depth look at the high pressure cold spray process and describes applications in various industries. Cold spray continues to be the fastest developing spray technology over the last decade, and a significant number of scientists, engineers, and technologists are joining the cold spray community around the globe. The technology is relatively young and work is being simultaneously pursued in universities, research centers, and in many high tech industries. As this novel technology spreads quickly into many new application areas, there is a large need for an authoritative source of information. This new book addresses this need and will be indispensable to universities, libraries, and those involved in thermal spray. It presents baseline information on design and modeling, materials science of engineered coatings, and specific applications in various high tech industries, and is also a hands-on resource for cold spray operators.
Download or read book Advances in Cold Spray written by Victor K. Champagne and published by Woodhead Publishing. This book was released on 2023-06-23 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Cold Spray: A Coating Deposition and Additive Manufacturing Process, Second Edition reviews the fundamental processes and recent advances made in the field of cold spray. This fully updated edition now includes a special chapter on Cold Spray Additive Manufacturing, along with advancements in impact modeling and simulation that allow a better understanding of the cold spray bonding mechanisms, powder synthesis and predictive modeling to improve the engineering of cold spray powders. In addition, materials properties data is a backbone of this book because the advanced cold spray materials have proven to be comparable to wrought and enable cold spray to be incorporated into structural applications for near-net shape parts production as well as for repair. Finally, numerous modern applications of cold spray representative of the Electronics, Medical, Petrochemical, Nuclear, Aerospace, Automotive, and Additive Manufacturing industries are presented. Provides information on the fundamentals of cold spray as an additive manufacturing process Presents the significant increase in properties of cold spray materials achieved to date Discusses recent advancements in cold spray powders, equipment, automation, modeling and simulation and the expansion of applications
Download or read book Cold Spray Coatings written by Pasquale Cavaliere and published by Springer. This book was released on 2017-11-08 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book combines the contributions of experts in the field to describe the behavior of various materials, micromechanisms involved during processing, and the optimization of cold-spray technology. It spans production, characterization, and applications including wear resistance, fatigue, life improvement, thermal barriers, crack repair, and biological applications. Cold spray is an innovative coating technology based on the kinetic energy gained by particles sprayed at very high pressures. While the technique was developed in the 1990s, industrial and scientific interest in this technology has grown vastly in the last ten years. Recently, many interesting applications have been associated with cold-sprayed coatings, including wear resistance, fatigue life improvement, thermal barriers, biological applications, and crack repair. However, many fundamental aspects require clarification and description.
Download or read book Practical Cold Spray written by Victor Kenneth Champagne Jr. and published by Springer Nature. This book was released on 2021-06-18 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed explanation of the cold spray process from a practical standpoint. Drawing on the authors’ 36 years of research and development experience, it is firmly rooted in theory but also substantiated by empirical data and practical knowledge, offering potential users the information they need to recognize the advantages, as well as the limitations, of cold spray. This sets it apart from previous works on the subject, which have been purely academic. Cold spray technology has made great dramatic strides over the last 10 years and is now being used extensively in the aerospace, electronics, automotive, medical, and even the petrochemical industries. Most recently, cold spray of near-net shaped parts was accomplished – something previously assumed to be impossible because of the limitations of commercially available cold spray systems and a lack of fundamental understanding regarding the process. The cost of cold spray has also declined, making it appealing to industry through the introduction of new powders, surface preparation techniques, and recovery systems tailored to the cold spray process. Though primarily intended for users of the technology, this handbook is also a valuable resource for researchers interested in advances in cold spray materials, improved feedstock powders, advanced hardware and software development, surface preparation techniques, and the numerous applications developed to date. For example, cold spray aluminum alloys have been developed that offer the strength and ductility of wrought material in the as-sprayed condition. This has yet to be achieved by conventional powder consolidation methods including laser sintering, electron beam, and ultrasonic techniques. Other topics covered include additive manufacturing, structural repair, nondestructive evaluation, advanced cold spray materials, qualification requirements, cold spray systems comparison, and, finally, helium recovery. Thanks to its practical focus, the book provides readers with everything they need to understand, evaluate, and implement cold spray technology.
Download or read book Cold Spray in the Realm of Additive Manufacturing written by Sunil Pathak and published by Springer Nature. This book was released on 2020-05-12 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sheds light on the development of the cold spray process in applications of additive manufacturing (AM) and repair/remanufacturing engineering. It covers the process fundamentals of different cold spray techniques, namely low pressure cold spray and high pressure cold spray process. Bonding mechanism and powder substrate interface are an important part of the book. The chapters present the recent developments in materials used in cold spraying for AM and various coating applications. The latest research in this area as well as possible avenues of future research are also highlighted as a way to encourage the researchers.
Download or read book Cold Spray Technology written by Anatolii Papyrin and published by Elsevier. This book was released on 2006-10-04 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of this book is Cold Spray technology. Cold Spray is a process of applying coatings by exposing a metallic or dielectric substrate to a high velocity (300 to 1200 m/s) jet of small (1 to 50 μm) particles accelerated by a supersonic jet of compressed gas. This process is based on the selection of the combination of particle temperature, velocity, and size that allows spraying at the lowest temperature possible. In the Cold Spray process, powder particles are accelerated by the supersonic gas jet at a temperature that is always lower than the melting point of the material, resulting in coating formation from particles in the solid state. As a consequence, the deleterious effects of high-temperature oxidation, evaporation, melting, crystallization, residual stresses, gas release, and other common problems for traditional thermal spray methods are minimized or eliminated. This book is the first of its kind on the Cold Spray process. Cold Spray Technology covers a wide spectrum of various aspects of the Cold Spray technology, including gas-dynamics, physics of interaction of high-speed solid particles with a substrate as well as equipment, technologies, and applications. Cold Spray Technology includes the results of more than 20 years of original studies (1984-2005) conducted at the Institute of Theoretical and Applied Mechanics of the Siberian Division of the Russian Academy of Science, as well as the results of studies conducted at most of the research centres around the world. The authors' goal is threefold. The first goal is to explain basic principles and advantages of the Cold Spray process. The second goal is, to give practical information on technologies and equipment. The third goal is to present the current state of research and development in this field over the world. The book provides coverage and data that will be of interest for users of Cold Spray technology as well as for other coating experts. At the present time the Cold Spray method is recognized by world leading scientists and specialists. A wide spectrum of research is being conducted at many research centres and companies in many countries. New approach to spray coatings Results are exceptionally pure coatings Low spray temperature without degradation of powder and substrate materials High productivity, high deposition efficiency High operational safety because of absence of high temperature gas jets, radiation and explosive gases Excellent thermal and electrical conductivity Wide spectrum of applications because of important advantages of the process
Download or read book Modern Materials and Manufacturing Techniques written by Ravi Kant and published by CRC Press. This book was released on 2024-03-05 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text provides the reader with an in-depth understanding of the need for next-generation materials and manufacturing, especially in terms of their designing process, manufacturing, upscaling, and finally their selection for industrial applications. It further discusses path-planning strategies for robot-based additive manufacturing. Discusses synthesis, modelling, and analysis of green composites and functionally graded materials. Explains hybrid manufacturing processes to address the challenges faced by the manufacturing industries. Covers additive manufacturing of advanced materials for smart products. Presents applications of lasers for sensing, characterization, and material processing. Illustrates principles and applications of 4D printing and cold spray-based additive manufacturing. The book focuses on sustainability in material and manufacturing processes. It covers important topics such as material recycling, optimal utilization of resources, green materials, improving surface inhomogeneity, stable material properties, and utilization of renewable energy sources. The text highlights the applications of deep learning for diagnosis and analysis in materials and manufacturing technologies. It is primarily written for senior undergraduate, graduate students, and academic researchers in the fields of manufacturing engineering, industrial and production engineering, materials science and engineering, and mechanical engineering.
Download or read book Recent Trends in Mechanical Engineering written by Ambrish Maurya and published by Springer Nature. This book was released on 2023-06-07 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the select papers presented at the International Conference on Progressive Research in Industrial & Mechanical Engineering (PRIME 2021), held at the National Institute of Technology (NIT) Patna, India. The book discusses various aspects related and relevant to core areas of mechanical engineering including engineering design, production engineering, industrial engineering, automobile engineering, thermal and fluids engineering, mechatronics, control and robotics and other inter-disciplinary emerging topics for potential use in a spectrum of applications. The book will be a valuable reference for students, researchers and professionals interested in mechanical engineering and allied fields.
Download or read book Multi dimensional Additive Manufacturing written by Soshu Kirihara and published by Springer Nature. This book was released on 2020-11-17 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, basic sciences and applied technologies in 3D printing and 2D coating—including 2D surface modulations on 3D printed objects—are described to explore and to image novel multidimensional additive manufacturing. Renowned researchers were selected from universities and national institutes as authors by the editorial board established in the Surface Modification Research and Technology Committee of the Japan Welding Engineering Society. The main readers of this book are expected to be graduate students, professional researchers, and engineers. Here, they can acquire abundant knowledge of digital design concepts and functional evaluations, enabling them practice material selection and process parameter optimization in novel additive manufacturing.
Download or read book Solid State Metal Additive Manufacturing written by Hang Z. Yu and published by John Wiley & Sons. This book was released on 2024-04-16 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid-State Metal Additive Manufacturing Timely summary of state-of-the-art solid-state metal 3D printing technologies, focusing on fundamental processing science and industrial applications Solid-State Metal Additive Manufacturing: Physics, Processes, Mechanical Properties, and Applications provides detailed and in-depth discussion on different solid-state metal additive manufacturing processes and applications, presenting associated methods, mechanisms and models, and unique benefits, as well as a detailed comparison to traditional fusion-based metal additive manufacturing. The text begins with a high-level overview of solid-state metal additive manufacturing with an emphasis on its position within the metal additive manufacturing spectrum and its potential for meeting specific demands in the aerospace, automotive, and defense industries. Next, each of the four categories of solid-state additive technologies—cold spray additive manufacturing, additive friction stir deposition, ultrasonic additive manufacturing, and sintering-based processes—is discussed in depth, reviewing advances in processing science, metallurgical science, and innovative applications. Finally, the future directions of these solid-state processes, especially the material innovation and artificial intelligence aspects, are discussed. Sample topics covered in Solid-State Metal Additive Manufacturing include: Physical processes and bonding mechanisms in impact-induced bonding and microstructures and microstructural evolution in cold sprayed materials Process fundamentals, dynamic microstructure evolution, and potential industrial applications of additive friction stir deposition Microstructural and mechanical characterization and industrial applications of ultrasonic additive manufacturing Principles of solid-state sintering, binder jetting-based metal printing, and sintering-based metal additive manufacturing methods for magnetic materials Critical issues inherent to melting and solidification, such as porosity, high residual stress, cast microstructure, anisotropic mechanical properties, and hot cracking Solid-State Metal Additive Manufacturing is an essential reference on the subject for academic researchers in materials science, mechanical, and biomedicine, as well as professional engineers in various manufacturing industries, especially those involved in building new additive technologies.
Download or read book Tribology of Additively Manufactured Materials written by Pradeep Menezes and published by Elsevier. This book was released on 2022-08-12 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribology of Additively Manufactured Materials: Fundamentals, Modeling, and Applications starts with a look at the history, methods and mechanics of additive manufacturing (AM), focusing on power bed fusion-based and direct energy deposition-based additive manufacturing. Following sections of the book provide a foundational background in the fundamentals of tribology, covering the basics of surface engineering, friction and wear, corrosion and tribocorrosion, and the tribological considerations of a variety of AM materials, such as friction and wear in non-metallic and metallic AM materials, degradation in non-metallic AM components, and corrosion and tribocorrosion in AM components. The book then concludes with a section covering modeling and simulation scenarios and challenges related to the tribology of AM materials, providing readers with the processing conditions needed to extend and strengthen the lifetime and durability of AM materials and components. Provides theoretical, experimental and computational data for a better understanding of the complex tribological behaviors in additively manufactured components Discusses applications of additively manufactured components, considering their tribological properties Studies how unique surface roughness and texture develop in additively manufactured components and how these unique characteristics affect their tribological function Outlines variables, additive manufacturing methods and performance of additively manufactured components Equips readers with a better understanding of degradation effects due to tribology and corrosion
Download or read book Handbook of Thermal Spray Technology written by Joseph R. Davis and published by ASM International. This book was released on 2004-01-01 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference covers principles, processes, types of coatings, applications, performance, and testing and analysis of thermal spray technology. It will serve as an introduction and guide for those new to thermal spray, and as a reference for specifiers and users of thermal spray coatings and thermal spray experts. Coverage encompasses basics of th
Download or read book Aluminum written by John E. Hatch and published by ASM International. This book was released on 1984-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive information for the American aluminium industry Collective effort of 53 recognized experts on aluminium and aluminium alloys Joint venture by world renowned authorities-the Aluminium Association Inc. and American Society for Metals. The completely updated source of information on aluminium industry as a whole rather than its individual contributors. this book is an opportunity to gain from The knowledge of the experts working for prestigious companies such as Alcoa, Reynolds Metals Co., Alcan International Ltd., Kaiser Aluminium & Chemical Corp., Martin Marietta Laboratories and Anaconda Aluminium Co. It took four years of diligent work to complete this comprehensive successor to the classic volume, Aluminium, published by ASM in 1967. Contents: Properties of Pure Aluminum Constitution of Alloys Microstructure of Alloys Work Hardening Recovery, Recrystalization and Growth Metallurgy of Heat Treatment and General Principles of Precipitation Hardening Effects of Alloying Elements and Impurities on Properties Corrosion Behaviour Properties of Commercial Casting Alloys Properties of Commercial Wrought Alloys Aluminum Powder and Powder Metallurgy Products.
Download or read book Cold Spray Additive Manufacturing written by Shuo Yin and published by Springer Nature. This book was released on 2021-04-28 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically describes the status quo and future development of cold spray additive manufacturing technology. It starts with a comprehensive introduction to the fundamentals of cold spray additive manufacturing, including its history, working principle, equipment, processing parameters and powder feedstock. It then discusses the fundamentals of and the latest developments in the gas flow character, particle acceleration, particle deposition and bond mechanism from the perspectives of both experiments and modelling to provide readers with insights into the cold spray additive manufacturing process. Further, it explores microstructure and properties, which are major concerns in the context of cold sprayed deposits. The book also highlights the strengthening strategies for cold sprayed deposits, from pre- and in-process to post-treatment. Lastly, it examines the current and potential applications of cold spray additive manufacturing.
Download or read book Self Lubricating Composites written by Pradeep L. Menezes and published by Springer Nature. This book was released on 2022-01-03 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: In most tribological applications, liquid or grease based lubricants are used to facilitate the relative motion of solid bodies to minimize friction and wear between interacting surfaces. The challenges for liquid lubricants arise in extreme environmental conditions, such as very high or low temperatures, vacuum, radiation, and extreme contact pressure. At these conditions, solid lubricants may be the alternative choice which can help to decrease friction and wear without incorporating liquid lubricants. Challenges with solid lubricants are to maintain a continuous supply of solid lubricants on the contact surfaces to act as lubricous layer between two sliding surfaces. Such a continuous supply is more easily maintained in the case of liquid lubricants when compared to solid lubricants. The most innovative development to ensure a continuous supply of solid lubricant to the contact surface during sliding is to introduce solid lubricant as reinforcement into the matrix of one of the sliding components. Composite materials are engineered or naturally occurring materials which contain two or more distinct constituents with significantly different chemical, physical and mechanical properties. Composites consist of reinforcement and matrix (metal, polymer and ceramics). Among various reinforcements, recent emerging material, solid lubricant, is found to have many favorable attributes such as good lubrication property. Self‐lubrication is the ability of a material to provide lubrication to the contact surface to decrease friction and wear rate in the absence of an external lubricant by transferring embedded solid lubricants in the composite to the interface. Self-lubricating composites (SLCs) are an important category of engineering materials that are increasingly replacing a number of conventional materials in the automotive, aerospace, and marine industries due to superior tribological properties. In SLCs, solid lubricant materials, including carbonous materials, molybdenum disulfide (MoS2), and hexagonal boron nitride (h-BN) are embedded into the matrices as reinforcements to manufacture a novel material with attractive self-lubricating properties. Several studies have been investigated the tribological properties of self-lubricating materials. This book fills that gap to have a reference book about self-lubricating materials and their properties to help scientists, engineers, and industries. This book discusses mechanisms of self-lubricating materials, self-lubricating properties and the applications for industries. The chapters will be written by authoritative expertise in the field. Additionally, this book will demonstrate fundamental study and most advanced innovations in self-lubricating materials as regards to friction and wear. The chapters also include tribological properties of composites and coatings and some practical applications of self-lubricating materials.
