Download or read book Models and Phenomena in Fracture Mechanics written by Leonid I. Slepyan and published by Springer Science & Business Media. This book was released on 2012-11-07 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting the most important results, methods, and open questions, this book describes and compares advanced models in fracture mechanics. The author introduces the required mathematical technique, mainly the theory of analytical functions, from scratch.
Download or read book A Variational Approach to Fracture and Other Inelastic Phenomena written by Gianpietro Del Piero and published by Springer Science & Business Media. This book was released on 2013-08-30 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book exposes a number of mathematical models for fracture of growing difficulty. All models are treated in a unified way, based on incremental energy minimization. They differ from each other by the assumptions made on the inelastic part of the total energy, here called the "cohesive energy". Each model describes a specific aspect of material response, and particular care is devoted to underline the correspondence of each model to the experiments. The content of the book is a re-elaboration of the lectures delivered at the First Sperlonga Summer School on Mechanics and Engineering Sciences in September 2011. In the year and a half elapsed after the course, the material has been revised and enriched with new and partially unpublished results. Significant additions have been introduced in the occasion of the course "The variational approach to fracture and other inelastic phenomena", delivered at SISSA, Trieste, in March 2013. The Notes reflect a research line carried on by the writer over the years, addressed to a comprehensive description of the many aspects of the phenomenon of fracture, and to its relations with other phenomena, such as the formation of microstructure and the changes in the material’s strength induced by plasticity and damage. Reprinted from the Journal of Elasticity, volume 112, issue 1, 2013.
Download or read book Dynamic Fracture Mechanics written by L. B. Freund and published by Cambridge University Press. This book was released on 1998-03-28 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on the development and analysis of mathematical models of fracture phenomena.
Download or read book Analytical Fracture Mechanics written by David J. Unger and published by Courier Corporation. This book was released on 2012-06-08 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Analytical Fracture Mechanics should prove to be a valuable resource to both the new student and the experienced researcher in fracture mechanics. It is recommended." — Applied Mechanics Review One of the central concerns of engineering is the failure of materials. Addressing this concern, fracture mechanics — an interdisciplinary subject spanning mechanical, civil, and materials engineering, applied mathematics, and physics — predicts the conditions under which such failure will occur due to crack growth. This valuable self-contained text by an expert in the field supplements standard fracture mechanics texts by focusing on analytical methods for determining crack-tip stress and strain fields. Following a comprehensive 120-page introduction — which provides all the background necessary for understanding the remaining chapters — the book is organized around a series of elastoplastic and hydrogen-assisted crack-tip problems and their solutions. The first chapter presents the only proven solution technique for the second order nonlinear partial differential equation governing a mode I elastoplastic crack problem. Other chapters deal with plastic zone transitions, environmental cracking, and small-scale yielding versus exact linear elastic solutions. One of the excellent features of this book is the clarity with which groups of problems are presented and related to each other. Another is the careful attention it gives to the various modes of fracture (I, II, and III) and to showing the circumstances under which information from a solution for one mode may be used to infer information in another mode. For this edition, the author has added a new appendix, "Stress Across an Elastoplastic Boundary of a Mode I Crack: Parabolic to Hyperbolic Plasticity Transition."
Download or read book Mechanics of Fatigue written by Vladimir V. Bolotin and published by CRC Press. This book was released on 2020-07-09 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Fatigue addresses the range of topics concerning damage, fatigue, and fracture of engineering materials and structures. The core of this resource builds upon the synthesis of micro- and macro-mechanics of fracture. In micromechanics, both the modeling of mechanical phenomena on the level of material structure and the continuous approach are based on the use of certain internal field parameters characterizing the dispersed micro-damage. This is referred to as continuum damage mechanics. The author develops his own theory for macromechanics, called analytical fracture mechanics. This term means the system cracked body - loading or loading device - is considered as a mechanical system and the tools of analytical (rational) mechanics are applied thoroughly to describe crack propagation until the final failure. Chapter discuss: preliminary information on fatigue and engineering methods for design of machines and structures against failures caused by fatigue fatigue crack nucleation, including microstructural and continuous models theory of fatigue crack propagation fatigue crack growth in linear elastic materials subject to dispersed damage fatigue cracks in elasto-plastic material, including crack growth retardation due to overloading as well as quasistationary approximation fatigue and related phenomena in hereditary solids application of the theory fatigue crack growth considering environmental factors unidirectional fiber composites with ductile matrix and brittle, initially continuous fibers laminate composites Mechanics of Fatigue serves students dealing with mechanical aspects of fatigue, conducting research in fracture mechanics, structural safety, mechanics of composites, as well as modern branches of mechanics of solids and structures.
Download or read book Fatigue Crack Growth in Rubber Materials written by Gert Heinrich and published by Springer Nature. This book was released on 2021-03-23 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book summarizes recent international research and experimental developments regarding fatigue crack growth investigations of rubber materials. It shows the progress in fundamental as well as advanced research of fracture investigation of rubber material under fatigue loading conditions, especially from the experimental point of view. However, some chapters will describe the progress in numerical modeling and physical description of fracture mechanics and cavitation phenomena in rubbers. Initiation and propagation of cracks in rubber materials are dominant phenomena which determine the lifetime of these soft rubber materials and, as a consequence, the lifetime of the corresponding final rubber parts in various fields of application. Recently, these phenomena became of great scientific interest due to the development of new experimental methods, concepts and models. Furthermore, crack phenomena have an extraordinary impact on rubber wear and abrasion of automotive tires; and understanding of crack initiation and growth in rubbers will help to support the growthing number of activities and worldwide efforts of reduction of tire wear losses and abrasion based emissions.
Download or read book Fracture Mechanics written by Alan T. Zehnder and published by Springer Science & Business Media. This book was released on 2012-01-05 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fracture mechanics is a vast and growing field. This book develops the basic elements needed for both fracture research and engineering practice. The emphasis is on continuum mechanics models for energy flows and crack-tip stress- and deformation fields in elastic and elastic-plastic materials. In addition to a brief discussion of computational fracture methods, the text includes practical sections on fracture criteria, fracture toughness testing, and methods for measuring stress intensity factors and energy release rates. Class-tested at Cornell, this book is designed for students, researchers and practitioners interested in understanding and contributing to a diverse and vital field of knowledge.
Download or read book Modeling of Defects and Fracture Mechanics written by G. Herrmann and published by Springer. This book was released on 2014-05-04 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: All materials contain numerous defects, such as microcracks, microvoids, inhomogeneities, dislocations, etc., which precede possible fracture. Thus mathematical modeling becomes necessary. This volume contains some introductory material, aspects of fracture mechanics, the theory of crystal defects, computational micromechanics, and the heterogenization methodology.
Download or read book Fracture Mechanics Test Methods For Concrete written by Surendra Shah and published by CRC Press. This book was released on 2004-03-01 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compares currently used methods in determining concrete toughness and presents recommended test procedures with theories and models for describing cracking and fracturing phenomena. Effects of loading rate, temperature and humidity are also examined. Well referenced and illustrated, this book is filled with practical technical information for mater
Download or read book Fracture Mechanics and Crack Growth written by Naman Recho and published by John Wiley & Sons. This book was released on 2012-12-27 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances related to the following two topics: how mechanical fields close to material or geometrical singularities such as cracks can be determined; how failure criteria can be established according to the singularity degrees related to these discontinuities. Concerning the determination of mechanical fields close to a crack tip, the first part of the book presents most of the traditional methods in order to classify them into two major categories. The first is based on the stress field, such as the Airy function, and the second resolves the problem from functions related to displacement fields. Following this, a new method based on the Hamiltonian system is presented in great detail. Local and energetic approaches to fracture are used in order to determine the fracture parameters such as stress intensity factor and energy release rate. The second part of the book describes methodologies to establish the critical fracture loads and the crack growth criteria. Singular fields for homogeneous and non-homogeneous problems near crack tips, v-notches, interfaces, etc. associated with the crack initiation and propagation laws in elastic and elastic-plastic media, allow us to determine the basis of failure criteria. Each phenomenon studied is dealt with according to its conceptual and theoretical modeling, to its use in the criteria of fracture resistance; and finally to its implementation in terms of feasibility and numerical application. Contents 1. Introduction. Part 1: Stress Field Analysis Close to the Crack Tip 2. Review of Continuum Mechanics and the Behavior Laws. 3. Overview of Fracture Mechanics. 4. Fracture Mechanics. 5. Introduction to the Finite Element Analysis of Cracked Structures. Part 2: Crack Growth Criteria 6. Crack Propagation. 7. Crack Growth Prediction in Elements of Steel Structures Submitted to Fatigue. 8. Potential Use of Crack Propagation Laws in Fatigue Life Design.
Download or read book Modeling of Defects and Fracture Mechanics written by G. Herrmann and published by . This book was released on 2014-09-01 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistical Physics of Fracture Breakdown and Earthquake written by Soumyajyoti Biswas and published by John Wiley & Sons. This book was released on 2015-08-10 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors bring together basic ideas from fracture mechanics and statistical physics, classical theories, simulation and experimental results to make the statistical physics aspects of fracture more accessible. They explain fracture-like phenomena, highlighting the role of disorder and heterogeneity from a statistical physical viewpoint. The role of defects is discussed in brittle and ductile fracture, ductile to brittle transition, fracture dynamics, failure processes with tension as well as compression: experiments, failure of electrical networks, self-organized critical models of earthquake and their extensions to capture the physics of earthquake dynamics. The text also includes a discussion of dynamical transitions in fracture propagation in theory and experiments, as well as an outline of analytical results in fiber bundle model dynamics With its wide scope, in addition to the statistical physics community, the material here is equally accessible to engineers, earth scientists, mechanical engineers, and material scientists. It also serves as a textbook for graduate students and researchers in physics.
Download or read book Methods of Fracture Mechanics Solid Matter Physics written by G.P. Cherepanov and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern fracture mechanics considers phenomena at many levels, macro and micro; it is therefore inextricably linked to methods of theoretical and mathematical physics. This book introduces these sophisticated methods in a straightforward manner. The methods are applied to several important phenomena of solid state physics which impinge on fracture mechanics: adhesion, defect nucleation and growth, dislocation emission, sintering, the electron beam effect and fractal cracks. The book shows how the mathematical models for such processes may be set up, and how the equations so formulated may be solved and interpreted. The many open problems which are encountered will provide topics for MSc and PhD theses in fracture mechanics, and in theoretical and experimental physics. As a supplementary text, the book can be used in graduate level courses on fracture mechanics, solid matter physics, and mechanics of solids, or in a special course on the application of fracture mechanics methods in solid matter physics.
Download or read book Damage Mechanics and Micromechanics of Localized Fracture Phenomena in Inelastic Solids written by George Z Voyiadjis and published by Springer Science & Business Media. This book was released on 2012-01-29 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book resulted from a series of lecture notes presented in CISM, Udine in July 7 -11, 2008. The papers inform about recent advances in continuum damage mechanics for both metals and metal matrix composites as well as the micromechanics of localization in inelastic solids. Also many of the different constitutive damage models that have recently appeared in the literature and the different approaches to this topic are presented, making them easily accessible to researchers and graduate students in civil engineering, mechanical engineering, engineering mechanics, aerospace engineering, and material science.
Download or read book Mechanical Behaviour of Materials written by Dominique François and published by Springer Science & Business Media. This book was released on 2012-12-24 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing new structural materials, extending lifetimes and guarding against fracture in service are among the preoccupations of engineers, and to deal with these they need to have command of the mechanics of material behaviour. This ought to reflect in the training of students. In this respect, the first volume of this work deals with elastic, elastoplastic, elastoviscoplastic and viscoelastic behaviours; this second volume continues with fracture mechanics and damage, and with contact mechanics, friction and wear. As in Volume I, the treatment links the active mechanisms on the microscopic scale and the laws of macroscopic behaviour. Chapter I is an introduction to the various damage phenomena. Chapter II gives the essential of fracture mechanics. Chapter III is devoted to brittle fracture, chapter IV to ductile fracture and chapter V to the brittle-ductile transition. Chapter VI is a survey of fatigue damage. Chapter VII is devoted to hydrogen embrittlement and to environment assisted cracking, chapter VIII to creep damage. Chapter IX gives results of contact mechanics and a description of friction and wear mechanisms. Finally, chapter X treats damage in non metallic materials: ceramics, glass, concrete, polymers, wood and composites. The volume includes many explanatory diagrams and illustrations. A third volume will include exercises allowing deeper understanding of the subjects treated in the first two volumes.
Download or read book Stochastic Crack Propagation written by Giora Maymon and published by Academic Press. This book was released on 2018-01-02 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stochastic Crack Propagation: Essential Practical Aspects describes a feature important to the analysis of stochastic crack propagation, starting with essential background theory. Processes, or phenomena, which are of practical importance in the work of design engineers or R&D teams are described chapter by chapter. Many examples are described and supported by listed references, and files of data that can be used with specialist software to practice design situations are included. Advice on how to use various computer programs to design and predict for stochastic crack growth is also provided, giving professionals a complete guide. Presents instructions and exercises in the ideal format for professionals, focusing on applications Explains a methodology on how to optimize the engineering design process by including stochastic crack growth behavior Provides computational files to help readers get up-to-speed with design using programs like ANSYS and NASTRAN for stochastic crack growth
Download or read book Fracture and Fatigue of Materials and Structures written by Jaros?aw Galkiewicz and published by Trans Tech Publications Ltd. This book was released on 2016-04-23 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of papers is related to actual problems from area of research of fatigue of materials and structures, fracture mechanics, void nucleation, void growth. In several articles are shown a new, sometimes futuristic, experimental techniques. Presented material will be useful for researchers and engineers from different branches of industry.
