Download or read book Modelling Simulation and Control of Urban Wastewater Systems written by Manfred Schütze and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: by Professor Poul Harremoes Environmental engineering has been a discipline dominated by empirical approaches to engineering. Historically speaking, the development of urban drainage structures was very successful on the basis of pure empiricism. Just think of the impressive structures built by the Romans long before the discipline of hydraulics came into being. The fact is that the Romans did not know much about the theories of hydraulics, which were discovered as late as the mid-1800s. However, with the Renaissance came a new era. Astronomy (Galileos) and basic physics (Newton) started the scientific revolution and in the mid-1800s Navier and Stokes developed the application of Newtons laws to hydrodynamics, and later, St. Venant the first basic physics description of the motion of water in open channels. The combination of basic physical understanding of the phenomena involved in the flow of water in pipes and the experience gained by "trial and error", the engineering approach to urban drainage improved the design and performance of the engineering drainage infrastructure. However, due to the mathematical complications of the basic equations, solutions were available only to quite simple cases of practical significance until the introduction of new principles of calculation made possible by computers and their ability to crunch numbers. Now even intricate hydraulic phenomena can be simulated with a reasonable degree of confidence that the simulations are in agreement with performance in practice, if the models are adequately calibrated with sample performance data.

Download or read book Urban Drainage Modeling written by Robert W. Brashear and published by . This book was released on 2001 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 91 papers presented at a specialty symposium on urban drainage modeling at the World Water and Environmental Resources Congress, held in Orlando, Florida, May 20-24, 2001.

Download or read book Optimization of Urban Wastewater Systems using Model Based Design and Control written by Carlos Alberto Velez Quintero and published by CRC Press. This book was released on 2020-11-25 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: A considerable amount of scientific evidence has been collected leading to the conclusion that urban wastewater components should be designed as one integrated system, in order to protect the receiving waters cost-effectively. Moreover, there is a need to optimize the design and operation of the sewerage network and wastewater treatment plant (WwTP) considering the dynamic interactions between them and the receiving waters. This book introduces a method called Model Based Design and Control (MoDeCo) for the optimum design and control of urban wastewater components. The book presents a detailed description of the integration of modelling tools for the sewer, the wastewater treatment plants and the rivers. The complex modelling structure used for the integrated model challenge previous applications of integrated modelling approaches presented in scientific literature. The combination of modelling tools and multi-objective evolutionary algorithms demonstrated in this book represent an excellent tool for designers and managers of urban wastewater infrastructure. This book also presents two alternatives to solve the computing demand of the optimization of integrated systems in practical applications: the use of surrogate modelling tools and the use of cloud computer infrastructure for parallel computing.

Download or read book Biological Wastewater Treatment Principles Modeling and Design written by Guang-Hao Chen and published by IWA Publishing. This book was released on 2020-07-15 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this book was published in 2008 and it went on to become IWA Publishing’s bestseller. Clearly there was a need for it because over the twenty years prior to 2008, the knowledge and understanding of wastewater treatment had advanced extensively and moved away from empirically-based approaches to a fundamental first-principles approach based on chemistry, microbiology, physical and bioprocess engineering, mathematics and modelling. However the quantity, complexity and diversity of these new developments was overwhelming for young water professionals, particularly in developing countries without readily available access to advanced-level tertiary education courses in wastewater treatment. For a whole new generation of young scientists and engineers entering the wastewater treatment profession, this book assembled and integrated the postgraduate course material of a dozen or so professors from research groups around the world who have made significant contributions to the advances in wastewater treatment. This material had matured to the degree that it had been codified into mathematical models for simulation with computers. The first edition of the book offered, that upon completion of an in-depth study of its contents, the modern approach of modelling and simulation in wastewater treatment plant design and operation could be embraced with deeper insight, advanced knowledge and greater confidence, be it activated sludge, biological nitrogen and phosphorus removal, secondary settling tanks, or biofilm systems. However, the advances and developments in wastewater treatment have accelerated over the past 12 years since publication of the first edition. While all the chapters of the first edition have been updated to accommodate these advances and developments, some, such as granular sludge, membrane bioreactors, sulphur conversion-based bioprocesses and biofilm reactors which were new in 2008, have matured into new industry approaches and are also now included in this second edition. The target readership of this second edition remains the young water professionals, who will still be active in the field of protecting our precious water resources long after the aging professors who are leading some of these advances have retired. The authors, all still active in the field, are aware that cleaning dirty water has become more complex but that it is even more urgent now than 12 years ago, and offer this second edition to help the young water professionals engage with the scientific and bioprocess engineering principles of wastewater treatment science and technology with deeper insight, advanced knowledge and greater confidence built on stronger competence.

Download or read book Urban Hydroinformatics written by Roland K. Price and published by IWA Publishing. This book was released on 2011 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to hydroinformatics applied to urban water management. It shows how to make the best use of information and communication technologies for manipulating information to manage water in the urban environment. The book covers the acquisition and analysis of data from urban water systems to instantiate mathematical models or calculations, which describe identified physical processes. The models are operated within prescribed management procedures to inform decision makers, who are responsible to recognized stakeholders. The application is to the major components of the urban water environment, namely water supply, treatment and distribution, wastewater and stormwater collection, treatment and impact on receiving waters, and groundwater and urban flooding. Urban Hydroinformatics pays particular attention to modeling, decision support through procedures, economics and management, and implementation in both developed and developing countries. The book is written with post-graduates, researchers and practicing engineers who are involved in urban water management and want to improve the scope and reliability of their systems.

Download or read book Sewer Networks and Processes within Urban Water Systems written by Jean-Luc Bertrand-Krajewski and published by IWA Publishing. This book was released on 2004-11-01 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this volume were originally presented at the 18th European Junior Scientists Workshop (EJSW), Portugal, on 8-11 November 2003 and at the 1st Asian Junior Scientists Workshop (AJSW), Malaysia, on 7-10 February 2004. The workshops were organised by the SS&PWG (Sewer Systems and Processes Working Group) of the IWA/IAHR Joint Committee on Urban Drainage. The two separate workshops were convened under the general themes of "Sewer Processes, Networks and Urban Drainage" and specific topics covered included integrated modelling of urban water systems; modelling of pollutant loads; calibration of models; bed-load transport; sewer pipe roughness; advection in sewers; anoxic processes; infiltration and exfiltration; runoff source control; pollutant loads; ventilation and oxygen uptake. From the 37 full papers presented at the two workshops, 16 papers have been selected by independent reviewers from the SS&PWG for publication in Sewer Networks and Processes within Urban Water Systems. They reflect rather well the variety of topics presented during both workshops, and bring the high-quality work of these junior authors to the wider audience it merits.

Download or read book River Water Quality Model written by P. Reichert and published by IWA Publishing. This book was released on 2001-08-31 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Scientific and Technical Report (STR) presents the findings of the IWA Task Group on River Water Quality Modelling (RWQM). The task group was formed to create a scientific and technical base from which to formulate standardized, consistent river water quality models and guidelines for their implementation. This STR presents the first outcome in this effort: River Water Quality Model No. 1 (RWQM1). As background to the development of River Water Quality Model No.1, the Task Group completed a critical evaluation of the current state of the practice in water quality modelling. A major limitation in model formulation is the continued reliance on BOD as the primary state variable, despite the fact BOD does not include all biodegradable matter. A related difficulty is the poor representation of benthic flux terms. As a result of these limitations, it is impossible to close mass balances completely in most existing models. These various limitations in current river water quality models impair their predictive ability in situations of marked changes in a river's pollutant load, streamflow, morphometry, or other basic characteristics. RWQM 1 is intended to serve as a framework for river water quality models that overcome these deficiencies in traditional water quality models and most particularly the failure to close mass balances between the water column and sediment. To these ends, the model incorporates fundamental water quality components and processes to characterise carbon, oxygen, nitrogen, and phosphorus (C, O, N, and P) cycling instead of biochemical oxygen demand as used in traditional models. The model is presented in terms of process and components represented via a 'Petersen stoichiometry matrix', the same approach used for the IWA Activated Sludge Models. The full RWQM1 includes 24 components and 30 processes. The report provides detailed examples on reducing the numbers of components and processes to fit specific water quality problems. Thus, the model provides a framework for both complicated and simplified models. Detailed explanations of the model components, process equations, stoichiometric parameters, and kinetic parameters are provided, as are example parameter values and two case studies. The STR is intended to launch a participatory process of model development, application, and refinement. RWQM1 provides a framework for this process, but the goal of the Task Group is to involve water quality professionals worldwide in the continued work developing a new water quality modelling approach. This text will be an invaluable reference for researchers and graduate students specializing in water resources, hydrology, water quality, or environmental modelling in departments of environmental engineering, natural resources, civil engineering, chemical engineering, environmental sciences, and ecology. Water resources engineers, water quality engineers and technical specialists in environmental consultancy, government agencies or regulated industries will also value this critical assessment of the state of practice in water quality modelling. Key Features presents a unique new technical approach to river water quality modelling provides a detailed technical presentation of the RWQM1 water quality process model gives an informative critical evaluation of the state of the practice in water quality modelling, and problems with those practices provides a step by step procedure to develop a water quality model Scientific & Technical Report No. 12

Download or read book Living Roofs in Integrated Urban Water Systems written by Daniel Roehr and published by Routledge. This book was released on 2015-03-05 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the infrastructure to manage storm water threats in cities becoming increasingly expensive to build or repair, the design community needs to look at alternative approaches. Living roofs present an opportunity to compliment ground-level storm water control measures, contributing to a holistic, integrated urban water management system. This book offers tools to plan and design living roofs, in the context of effectively mitigating storm water. Quantitative tools for engineering calculations and qualitative discussion of potential influences and interactions of the design team and assembly elements are addressed.

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1990 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book New Trends in Urban Drainage Modelling written by Giorgio Mannina and published by Springer. This book was released on 2018-08-31 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the latest research advances, innovations, and applications in the field of urban drainage and water management as presented by leading researchers, scientists and practitioners from around the world at the 11th International Conference on Urban Drainage Modelling (UDM), held in Palermo, Italy from 23 to 26 September, 2018. The conference was promoted and organized by the University of Palermo, Italy and the International Working Group on Data and Models, with the support of four of the world’s leading organizations in the water sector: the International Water Association (IWA), International Association for Hydro-Environment Engineering and Research (IAHR), Environmental & Water Resources Institute (EWRI) - ASCE, and the International Environmental Modelling and Software Society (iEMSs). The topics covered are highly diverse and include drainage and impact mitigation, water quality, rainfall in urban areas, urban hydrologic and hydraulic processes, tools, techniques and analysis in urban drainage modelling, modelling interactions and integrated systems, transport and sewer processes (incl. micropollutants and pathogens), and water management and climate change. The conference’s primary goal is to offer a forum for promoting discussions amongst scientists and professionals on the interrelationships between the entire water cycle, environment and society.

Download or read book Integrated Pollution Prevention and Control for the Municipal Water Cycle in a River Basin Context written by Alberto Galvis-Castaño and published by CRC Press. This book was released on 2019-08-14 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: The protection of water resources from deterioration in quality by pollution discharges is probably the biggest challenge in sustainable water resources management in the recent decades. In practice, most countries have adopted pollution control strategies and measures which are based on ‘end-of-pipe’ solutions: wastewater treatment plants and adjustments to the regulations, including taxes for wastewater discharges (Conventional Strategy). Although this approach involves very high costs, on many occasions, this strategy has been a complete failure. The research described in this book contribute to the development of sustainable solutions for the previously outlined problem. It was based on the validation of the Three-Step Strategic Approach concept (3-SSA), which includes: 1) prevention or minimisation of waste production; 2) treatment aimed at recovery and reuse of waste components, and 3) disposal of remaining waste with stimulation of natural self-purification of the receiving water body. The study showed overall positive effects of the 3-SSA, in comparison of Conventional Strategy, on wastewater management in the Upper Basin (389 km) of the Cauca river, the second most important river in Colombia. The Cost Benefit Analysis clearly favoured the 3-SSA, generating a major impact on the river water quality at lower cost compared to the Conventional Strategy.

Download or read book Current Practices in Modelling the Management of Stormwater Impacts written by William James and published by CRC Press. This book was released on 1994-02-07 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This impressive publication presents the proceedings of the 1993 Toronto Stormwater and Water Quality Modelling meeting. The number of papers in the book has been substantially increased and, for the first time, the contributions have been peer reviewed for novelty, accuracy, readability, and relevance. Chapters are arranged in five sections: ecosystem impacts, water quality modelling, new methods and modelling, data management, and current practice. The appendices are valuable research aids, with a detailed index, a substantial glossary encompassing the entire discipline, lists of acronyms, models, and abbreviations, and a complete list of authors cited in the book. The editor also provides a classification of the 485 papers of the 11-year series of conferences held at the University of Kentucky at Louisville.

Download or read book Towards Industry 5 0 written by Numan M. Durakbasa and published by Springer Nature. This book was released on 2023-03-01 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers from International Symposium for Production Research 2022, held on October 6–9, 2022, Turkey. The book reports recent advances in production engineering and operations. It explores topics including: production research; production management; operations management; industry 4.0; industrial engineering; mechanical engineering; engineering management; and operational research. Presenting real-life applications, case studies, and mathematical models, this book is of interest to researchers, academics, and practitioners in the field of production and operation engineering. It provides both the results of recent research and practical solutions to real-world problems.

Download or read book Advances in Modeling and Management of Urban Water Networks written by Alberto Campisano and published by MDPI. This book was released on 2021-01-06 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Special Issue on Advances in Modeling and Management of Urban Water Networks (UWNs) explores four important topics of research in the context of UWNs: asset management, modeling of demand and hydraulics, energy recovery, and pipe burst identification and leakage reduction. In the first topic, the multi-objective optimization of interventions on the network is presented to find trade-off solutions between costs and efficiency. In the second topic, methodologies are presented to simulate and predict demand and to simulate network behavior in emergency scenarios. In the third topic, a methodology is presented for the multi-objective optimization of pump-as-turbine (PAT) installation sites in transmission mains. In the fourth topic, methodologies for pipe burst identification and leakage reduction are presented. As for the urban drainage systems (UDSs), the two explored topics are asset management, with a system upgrade to reduce flooding, and modeling of flow and water quality, with analyses on the transition from surface to pressurized flow, impact of water use reduction on the operation of UDSs, and sediment transport in pressurized pipes. The Special Issue also includes one paper dealing with the hydraulic modeling of an urban river with a complex cross-section.

Download or read book Advances in Modeling the Management of Stormwater Impacts written by William James and published by CRC Press. This book was released on 1996-01-01 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why bother documenting conference proceedings? Simple: accountability. What we are doing to the environment today - and the arguments we use to justify it - will seem incomprehensible in the future. This popular series demonstrates state-of-the-art methods, models, and techniques for water quality management and related environmental issues. The material is peer-reviewed for readability as well as merit. The coverage is multidisciplinary and includes many opposing views. Features

Download or read book Activated Sludge Models written by The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment and published by IWA Publishing. This book was released on 2000-05-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9

Download or read book Solids in Sewers written by Richard M. Ashley and published by IWA Publishing. This book was released on 2004-04-30 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Report presents information on the current state of knowledge of the origins, occurrence, nature and effects of sewer solids for use by engineers, scientists, administrators and water quality planners for the planning, design and operation of sewerage systems. The report addresses both sewer maintenance requirements and environmental protection issues. Increasing environmental standards, coupled with public expectations, have led to stringent water quality standards. In response to this, it has been necessary to develop new methodologies and computer based analytical techniques to model and understand the performance of all aspects of waste water systems. Fundamental to these techniques is the understanding of the way in which sewer solids contribute to the poor performance of wastewater systems and consequential environmental damage. The information presented in this Report about the origins, nature, movement, hydraulic and polluting effects of solids in sewers has enabled strategies and rules to be developed for the management of sewerage systems to minimise the deleterious effects of these solids and associated pollutants. Scientific & Technical Report No. 14