Download or read book Guidelines for Using Activated Sludge Models written by Leiv Rieger and published by IWA Publishing. This book was released on 2012-09-14 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modelling of activated sludge systems is used widely for plant design, optimisation, training, controller design and research. The quality of simulation studies varies depending on the project objectives, finances and expertise available. Consideration has to be given to the model accuracy and the amount of time required carrying out a simulation study to produce the desired accuracy. Inconsistent approaches and insufficient documentation make quality assessment and comparison of simulation results difficult or almost impossible. A general framework for the application of activated sludge models is needed in order to overcome these obstacles. The genesis of the Good Modelling Practice (GMP) Task Group lies in a workshop held at the 4th IWA World Water Congress in Marrakech, Morocco where members of research groups active in wastewater treatment modelling came together to develop plans to synthesize the best practices of modellers from all over the world. The most cited protocols were included in the work, amongst others from: HSG (Hochschulgruppe), STOWA, BIOMATH and WERF. The goal of the group is to set up an internationally accepted framework to deal with the ASM type models in practice. This framework shall make modelling more straightforward and systematic to use especially for practitioners and consultants. Additionally, it shall help to define quality levels for simulation results, a procedure to assess this quality and to assist in the proper use of the models. The framework will describe a methodology for goal-oriented application of activated sludge models demonstrated by means of a concise guideline about the procedure of a simulation study and some illustrative case studies. The case studies shall give examples for the required data quality and quantity and the effort for calibration/validation with respect to a defined goal. The final report will include an extended appendix with additional information and details of methodologies. Additional features in Guidelines for Using Activated Sludge Models include a chapter on modelling industrial wastewater, an overview on the history, current practice and future of activated sludge modelling and several explanatory case studies. It can be used as an introductory book to learn about Good Modelling Practice (GMP) in activated sludge modelling and will be of special interest for process engineers who have no prior knowledge of modelling or for lecturers who need a textbook for their students. The STR can also be used as a modelling reference book and includes an extended appendix with additional information and details of methodologies. Scientific and Technical Report No. 22

Download or read book Frontiers in Wastewater Treatment and Modelling written by Giorgio Mannina and published by Springer. This book was released on 2017-05-04 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the latest research advances, innovations, and applications in the field of water management and environmental engineering as presented by leading researchers, engineers, life scientists and practitioners from around the world at the Frontiers International Conference on Wastewater Treatment (FICWTM), held in Palermo, Italy in May 2017. The topics covered are highly diverse and include the physical processes of mixing and dispersion, biological developments and mathematical modeling, such as computational fluid dynamics in wastewater, MBBR and hybrid systems, membrane bioreactors, anaerobic digestion, reduction of greenhouse gases from wastewater treatment plants, and energy optimization. The contributions amply demonstrate that the application of cost-effective technologies for waste treatment and control is urgently needed so as to implement appropriate regulatory measures that ensure pollution prevention and remediation, safeguard public health, and preserve the environment. The contributions were selected by means of a rigorous peer-review process and highlight many exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different water specialists.

Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2020-03-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.

Download or read book Dynamical Modelling Estimation in Wastewater Treatment Processes written by D. Dochain and published by IWA Publishing. This book was released on 2001-12-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental quality is becoming an increasing concern in our society. In that context, waste and wastewater treatment, and more specifically biological wastewater treatment processes play an important role. In this book, we concentrate on the mathematical modelling of these processes. The main purpose is to provide the increasing number of professionals who are using models to design, optimise and control wastewater treatment processes with the necessary background for their activities of model building, selection and calibration. The book deals specifically with dynamic models because they allow us to describe the behaviour of treatment plants under the highly dynamic conditions that we want them to operate (e.g. Sequencing Batch Reactors) or we have to operate them (e.g. storm conditions, spills). Further extension is provided to new reactor systems for which partial differential equation descriptions are necessary to account for their distributed parameter nature (e.g. settlers, fixed bed reactors). The model building exercise is introduced as a step-wise activity that, in this book, starts from mass balancing principles. In many cases, different hypotheses and their corresponding models can be proposed for a particular process. It is therefore essential to be able to select from these candidate models in an objective manner. To this end, structure characterisation methods are introduced. Important sections of the book deal with the collection of high quality data using optimal experimental design, parameter estimation techniques for calibration and the on-line use of models in state and parameter estimators. Contents Dynamical Modelling Dynamical Mass Balance Model Building and Analysis Structure Characterisation (SC) Structural Identifiability Practical Identifiability and Optimal Experiment Design for Parameter Estimation (OED/PE) Estimation of Model Parameters Recursive State and Parameter Estimation Glossary Nomenclature

Download or read book Methods for Wastewater Characterization in Activated Sludge Modelling written by Henryk Melcer and published by IWA Publishing. This book was released on 2004-11-01 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical modeling is a useful tool for the design, analysis and control of wastewater treatment systems. The activated sludge process is one of the most common processes used in wastewater treatment, and therefore is a particularly important candidate for the application of mathematical models. In the 1980s, a task group organized by the International Association on Water Quality (IAWQ) developed a conceptual model of the activated sludge process, which has become an industry-wide standard for the development of computer-based activated sludge models. A recent version of the IAWQ model incorporates 19 components, 17 processes, and numerous rate and stoichiometric coefficients. It is difficult and costly to quantify all of the necessary coefficients for any given application of the model; consequently, it is important to identify the most critical wastewater and biomass components and the relevant coefficients to be quantified for the most common uses of the model. It is also important to provide guidance to potential model users on the use of default and/or estimated values for the remaining parameters.

Download or read book Biological Wastewater Treatment written by Mogens Henze and published by IWA Publishing (International Water Assoc). This book was released on 1881 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: For information on the online course in Biological Wastewater Treatment from UNESCO-IHE, visit: http://www.iwapublishing.co.uk/books/biological-wastewater-treatment-online-course-principles-modeling-and-design Over the past twenty years, the knowledge and understanding of wastewater treatment have advanced extensively and moved away from empirically-based approaches to a first principles approach embracing chemistry, microbiology, physical and bioprocess engineering, and mathematics. Many of these advances have matured to the degree that they have been codified into mathematical models for simulation with computers. For a new generation of young scientists and engineers entering the wastewater treatment profession, the quantity, complexity and diversity of these new developments can be overwhelming, particularly in developing countries where access is not readily available to advanced level tertiary education courses in wastewater treatment. Biological Wastewater Treatment addresses this deficiency. It assembles and integrates the postgraduate course material of a dozen or so professors from research groups around the world that have made significant contributions to the advances in wastewater treatment. The book forms part of an internet-based curriculum in biological wastewater treatment which also includes: Summarized lecture handouts of the topics covered in book Filmed lectures by the author professors Tutorial exercises for students self-learning Upon completion of this curriculum the modern approach of modelling and simulation to wastewater treatment plant design and operation, be it activated sludge, biological nitrogen and phosphorus removal, secondary settling tanks or biofilm systems, can be embraced with deeper insight, advanced knowledge and greater confidence.

Download or read book Industrial Wastewater Treatment by Activated Sludge written by Derin Orhon and published by IWA Publishing. This book was released on 2009-02-02 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial pollution is still a major concern and despite its significance, sound and systematic pollution control efforts are very poorly documented. The character and treatability of industrial wastewaters is highly variable and specific for each industrial activity. Biological treatment with activated sludge is the appropriate technology for industrial wastewaters from several major industrial sectors. Industrial Wastewater Treatment by Activated Sludge deals with the activated sludge treatment of industrial wastewaters by considering conceptual frameworks, methodologies and case studies, in a stepwise manner. The issues related to activated sludge treatment, such as biodegradability based characterization, modeling, assessment of stoichiometric and kinetic parameters and design, as well as the issues of industrial pollution control, e.g. in-plant control, effect of pretreatment, etc. are combined in a way to provide a comprehensive and information-rich view to the reader. By doing so, the book supplies an up-to-date reference for industrial wastewater experts and both graduate and undergraduate students. Industrial Wastewater Treatment by Activated Sludge provides a roadmap, describing the methodologies for the treatment of industrial wastewaters from several major sectors, based on a solid theoretical background. Up to now although valuable separate efforts both on activated sludge and industrial wastewater treatment have been presented, an integrated approach that is crucial to practice has not been available. This gap is filled by this book.

Download or read book Sequencing Batch Reactor Technology written by Peter A. Wilderer and published by IWA Publishing. This book was released on 2001-03-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report highlights various types of SBRs, design considerations and procedures, equipment required, and experiences gained from practical applications. This report will help both designers and operators of SBRs understand how to use this technology successfully. The focus is on the application of fill-and-draw, variable volume, periodically operated, unsteady-state principles to activated sludge systems. Research findings are presented, from both the laboratory and pilot and full scale SBRs. Also included is a description of trends for technological developments and a discussion of open questions regarding research, development, application, and operation. Contents Introduction Fundamentals of Periodic Processes General Overview of SBR Applications Design of Activated Sludge SBR Plants Equipment and Instrumentation Practical Experiences Evaluation of SBR Facilities in Australia Evaluation of SBR Facilities in the USA and Canada Evaluation of SBR Facilities in Germany Evaluation of SBR Facilities in France Evaluation of SBR facilities in Japan Scientific and Technical Report No. 10

Download or read book Anaerobic Digestion Model No 1 ADM1 written by IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes and published by IWA Publishing. This book was released on 2002-02-01 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IWA Task Group for Mathematical Modelling of Anaerobic Digestion Processes was created with the aim to produce a generic model and common platform for dynamic simulations of a variety of anaerobic processes. This book presents the outcome of this undertaking and is the result of four years collaborative work by a number of international experts from various fields of anaerobic process technology. The purpose of this approach is to provide a unified basis for anaerobic digestion modelling. It is hoped this will promote increased application of modelling and simulation as a tool for research, design, operation and optimisation of anaerobic processes worldwide. This model was developed on the basis of the extensive but often disparate work in modelling and simulation of anaerobic digestion systems over the last twenty years. In developing ADM1, the Task Group have tried to establish common nomenclature, units and model structure, consistent with existing anaerobic modelling literature and the popular activated sludge models (See Activated Sludge Models ASM1, ASM2, ASM2d and ASM3, IWA Publishing, 2000, ISBN: 1900222248). As such, it is intended to promote widespread application of simulation from domestic (wastewater and sludge) treatment systems to specialised industrial applications. Outputs from the model include common process variables such gas flow and composition, pH, separate organic acids, and ammonium. The structure has been devised to encourage specific extensions or modifications where required, but still maintain a common platform. During development the model has been successfully tested on a range of systems from full-scale waste sludge digestion to laboratory-scale thermophilic high-rate UASB reactors. The model structure is presented in a readily applicable matrix format for implementation in many available differential equation solvers. It is expected that the model will be available as part of commercial wastewater simulation packages. ADM1 will be a valuable information source for practising engineers working in water treatment (both domestic and industrial) as well as academic researchers and students in Environmental Engineering and Science, Civil and Sanitary Engineering, Biotechnology, and Chemical and Process Engineering departments. Contents Introduction Nomenclature, State Variables and Expressions Biochemical Processes Physicochemical Processes Model Implementation in a Single Stage CSTR Suggested Biochemical Parameter Values, Sensitivity and Estimation Conclusions References Appendix A: Review of Parameters Appendix B: Supplementary Matrix Information Appendix C: Integration with the ASM Appendix D: Estimating Stoichiometric Coefficients for Fermentation Scientific & Technical Report No.13

Download or read book Applications of Activated Sludge Models written by Damir Brdjanovic and published by IWA Publishing. This book was released on 2015-02-15 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 1982 the International Association on Water Pollution Research and Control (IAWPRC), as it was then called, established a Task Group on Mathematical Modelling for Design and Operation of Activated Sludge Processes. The aim of the Task Group was to create a common platform that could be used for the future development of models for COD and N removal with a minimum of complexity. As the collaborative result of the work of several modelling groups, the Activated Sludge Model No. 1 (ASM1) was published in 1987, exactly 25 years ago. The ASM1 can be considered as the reference model, since this model triggered the general acceptance of wastewater treatment modelling, first in the research community and later on also in practice. ASM1 has become a reference for many scientific and practical projects, and has been implemented (in some cases with modifications) in most of the commercial software available for modelling and simulation of plants for N removal. The models have grown more complex over the years, from ASM1, including N removal processes, to ASM2 (and its variations) including P removal processes, and ASM3 that corrects the deficiencies of ASM1 and is based on a metabolic approach to modelling. So far, ASM1 is the most widely applied. Applications of Activated Sludge Models has been prepared in celebration of 25 years of ASM1 and in tribute to the activated sludge modelling pioneer, the late Professor G.v.R. Marrais. It consists of a dozen of practical applications for ASM models to model development, plant optimization, extension, upgrade, retrofit and troubleshooting, carried out by the members of the Delft modelling group over the last two decades.

Download or read book Handbook of Research on Resource Management for Pollution and Waste Treatment written by Affam, Augustine Chioma and published by IGI Global. This book was released on 2019-10-25 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is necessary to understand the extent of pollution in the environment in terms of the air, water, and soil in order for both humans and animals to live healthier lives. Poor waste treatment or pollution monitoring can lead to massive environmental issues, such as diminishing valuable resources, and cause a significant negative impact on society. Solutions, such as reuse of waste and sustainable waste management, must be explored to prevent these adverse effects. The Handbook of Research on Resource Management for Pollution and Waste Treatment is a collection of innovative research that examines waste and pollution treatment methods that can be adopted at local and international levels and examines appropriate resource management strategies for environmentally related issues. Featuring coverage on a wide range of topics such as soil washing, bioremediation, and runoff handling, this book is ideally designed for environmentalists, engineers, waste management professionals, natural resource regulators, environmental policymakers, scientists, academicians, researchers, and students seeking current research on viable resource management methods for the regeneration of their immediate environment.

Download or read book Wastewater Treatment Systems written by Gustaf Olsson and published by IWA Publishing. This book was released on 1999-05-31 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book for those operating and studying biological wastewater treatment plants. It introduces the state-of-the-art in process systems analysis (modelling and simulation, monitoring and diagnosis, process control and instrumentation) and in particular its application to wastewater treatment. While the emphasis is on biological nutrient removal, there is discussion of anaerobic treatment, and the principles apply to any treatment process. For the computer literate there is also a collection of MATLAB programs and functions that are mentioned throughout the book. They will run on both the professional and student editions of MATLAB Version 5. Contents Modelling Plant Dynamics, Basic Modelling, Advanced Modelling Empirical or Black-Box Models, Experiments and Data Screening, Principles of Parameter Estimation, Fitting and Validating Models, Simulators Diagnosis Diagnosis - an Introduction, Quality Management, Model Based Diagnosis, Knowledge Based Systems Control Goals and Strategies, Disturbances Manipulated Variables, Feedback Control, Model Based Control, Batch Plant Control, Plant Wide Control, Benefit Studies Instrumentation Primary Sensors, Analysers Actuators and Controllers The Future

Download or read book Handbook of Biological Wastewater Treatment written by Adrianus van Haandel and published by IWA Publishing. This book was released on 2012-02-20 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this comprehensive new edition of Handbook of Biological Wastewater Treatment ranges from the design of the activated sludge system, final settlers, auxiliary units (sludge thickeners and digesters) to pre-treatment units such as primary settlers and UASB reactors. The core of the book deals with the optimized design of biological and chemical nutrient removal. The book presents the state-of-the-art theory concerning the various aspects of the activated sludge system and develops procedures for optimized cost-based design and operation. It offers a truly integrated cost-based design method that can be easily implemented in spreadsheets and adapted to the particular needs of the user. Handbook of Biological Wastewater Treatment: Second Edition incorporates valuable new material that improves the instructive qualities of the first edition. The book has a new structure that makes the material more readily understandable and the numerous additional examples clarify the text. On the website www.wastewaterhandbook.com three free excel design spreadsheets for different configurations (secondary treatment with and without primary settling and nitrogen removal) can be downloaded to get the reader started with their own design projects. New sections have been added throughout: to explain the difference between true and apparent yield while the section on the F/M ratio, and especially the reasons not to use it, has been expanded; to demonstrate the effect of the oxygen recycle to the anoxic zones on both the denitrification capacity and the concept of available nitrate is explained in more detail. the latest developments on the causes and solution to sludge bulking and scum formation to show the rapid developments of innovative nitrogen removal and sludge separation problems the anaerobic pre-treatment section is completely rewritten based on the experiences obtained from an extensive review of large full-scale UASB based sewage treatment plants a new section on industrial anaerobic wastewater treatment three new appendices have been added. These deal with the calibration of the denitrification model, empirical design guidelines for final settler design (STORA/STOWA and ATV) and with the potential for development of denitrification in the final settler. A new chapter on moving bed biofilm reactors Handbook of Biological Wastewater Treatment: Second Edition is written for post graduate students and engineers in consulting firms and environmental protection agencies. It is an invaluable resource for everybody working in the field of wastewater treatment. Lecturer support material is available when adopted for university courses. This includes course material for the first 7 modules in the form of PDF printouts and an exercise file with questions and answers and a symbol list. Authors: Prof. dr. ir. A.C. van Haandel, Federal University of Campina Grande - Brazil and Ir. J.G.M. van der Lubbe, Biothane Systems International - Veolia, The Netherlands

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1989 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Activated Sludge Separation Problems written by Valter Tandoi and published by IWA Publishing. This book was released on 2017-09-15 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge Separation Problems: Theory, Control Measures, Practical Experiences, Second Edition, describes the most common activated sludge separation problems and explains the main reasons for the growth of the different filamentous microorganisms in activated sludge. The book summarizes the identification techniques for important groups of activated sludge microorganisms both based on conventional microscopic analysis and using the biological molecular tools available today (FISH and PCR). This new edition, with 70% new and updated material, also provides explanation of basic activated sludge process principles and of parameters necessary for process control and operation. The theory of secondary clarifies is described to the extent necessary for understanding the construction and operation of secondary clarifiers. The activated sludge reactor and secondary clarifies are treated as one system and the interactions are explained. The wide range of experiences around the world is documented and the methods to avoid the proliferation of these organisms are presented and critically reviewed. Activated Sludge Separation Problems consists of six chapters, presenting up-to-date technical and scientific aspects of these processes. The new edition also features an extended list of literature references for further reading. The book will be a valuable help for students of environmental engineering, wastewater specialists, plant operators and designers of activated sludge plants. It is also useful for specialists in wastewater operation laboratories, especially for those studying activated sludge separation properties.

Download or read book Activated Sludge and Aerobic Biofilm Reactors written by Marcos Von Sperling and published by IWA Publishing. This book was released on 2007-03-30 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Activated Sludge and Aerobic Biofilm Reactors is the fifth volume in the series Biological Wastewater Treatment. The first part of the book is devoted to the activated sludge process, covering the removal of organic matter, nitrogen and phosphorus.A detailed analysis of the biological reactor (aeration tank) and the final sedimentation tanks is provided. The second part of the book covers aerobic biofilm reactors, especially trickling filters, rotating biological contractors and submerged aerated biofilters. For all the systems, the book presents in a clear and informative way the main concepts, working principles, expected removal efficiencies, design criteria, design examples, construction aspects and operational guidelines. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 6: Sludge Treatment and Disposal

Download or read book Activated Sludge Models written by The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment and published by IWA Publishing. This book was released on 2000-05-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9