Download or read book Modelling and Control of Reactive Distillation Processes written by and published by . This book was released on 2003 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactive Distillation Design and Control written by William L. Luyben and published by John Wiley & Sons. This book was released on 2009-03-30 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: After an overview of the fundamentals, limitations, and scope of reactive distillation, this book uses rigorous models for steady-state design and dynamic analysis of different types of reactive distillation columns and quantitatively compares the economics of reactive distillation columns with conventional multi-unit processes. It goes beyond traditional steady-state design that primarily considers the capital investment and energy costs when analyzing the control structure and the dynamic robustness of disturbances, and discusses how to maximize the economic and environmental benefits of reactive distillation technology.
Download or read book Reactive Distillation written by Kai Sundmacher and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a reactive distillation column, both the chemical conversion and the distillative separation of the product mixture are carried out simultaneously. Through this integrative strategy, chemical equilibrium limitations can be overcome, higher selectivities can be achieved and heat of reaction can be directly used for distillation. Increased process efficiency and reduction of investments and operational costs are the direct results of this approach. Highly renowned international experts from both industry and academia review the state-of-the-art and the future directions in application, design, analysis and control of Reactive Distillation processes. Part I surveys various industrial applications and covers both established large scale processes as well as new chemical reaction schemes with high future potential. Part II provides the vital details for analysis of reactive phase equilibria, and discusses the importance of chemical reaction kinetics, while Part III focuses on identifying feasible column configurations and designing their internal structure. Analysis and control of the complex dynamic and steady-state behavior of reactive distillation processes are described in Part IV. Reactive Distillation - a very promising alternative to conventional reaction-distillation flow schemes.
Download or read book Distillation Processes written by Vilmar Steffen and published by BoD – Books on Demand. This book was released on 2022-08-31 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distillation is an important separation technique that has been used for many centuries to exploit the volatility differences between components in a mixture. The distillation process has many variations and applications. This book includes two sections on desalination and reactive distillation. It discusses desalination in the processes of solar and membrane distillation, with a focus on the reduction of energy costs to obtain potable water. It also discusses reactive distillation, which can be used in some cases to reduce the power duty in the separation process by using the reaction heat directly in the separation. The book includes cases of mathematical modeling, simulation, and optimization of the distillation process.
Download or read book Distillation written by Vilmar Steffen and published by BoD – Books on Demand. This book was released on 2019-12-04 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to offer readers important topics on the modeling, simulation, and optimization of distillation processes. The book is divided into four main sections: the first section is introduction to the topic, the second presents work related to distillation process modeling, the third deals with the modeling of phase equilibrium, one of the most important steps of distillation process modeling, and the the fourth looks at the reactive distillation process, a process that has been applied successfully to a number of applications and has been revealed as a promising strategy for a number of recent challenges.
Download or read book Reactive Distillation written by Vandana Sakhre and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-04-19 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Neural Networks is an integral part in machine learning and a known tool for controlling nonlinear processes. The area is under rapid development and provides a tool for modelling and controlling of advanced processes. This book provides a comprehensive overview for modelling, simulation, measurement and control strategies for reactive distillations using neural networks.
Download or read book Distillation Equipment and Processes written by Andrzej Gorak and published by Academic Press. This book was released on 2014-06-24 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distillation: Equipment and Processes—winner of the 2015 PROSE Award in Chemistry & Physics from the Association of American Publishers—is a single source of authoritative information on all aspects of the theory and practice of modern distillation, suitable for advanced students and professionals working in a laboratory, industrial plants, or a managerial capacity. It addresses the most important and current research on industrial distillation, including all steps in process design (feasibility study, modeling, and experimental validation), together with operation and control aspects. This volume features an extra focus on distillation equipment and processes. - Winner of the 2015 PROSE Award in Chemistry & Physics from the Association of American Publishers - Practical information on the newest development written by recognized experts - Coverage of a huge range of laboratory and industrial distillation approaches - Extensive references for each chapter facilitates further study
Download or read book Dynamic Modelling and Control of Reactive Distillation for Hydrogenation of Benzene written by Obanifemi Aluko and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents a modeling and control study of a reactive distillation column used for hydrogenation of benzene. A steady state and a dynamic model have been developed to investigate control structures for the column. The most important aspects of this control problem are that the purity of the product streams regarding benzene need to be met. At the same time as little toluene as possible should be converted. The former is a constraint imposed by EPA regulations while the latter is tied to process economics due to the high octane number of toluene. It is required to satisfy both of these objectives even under the influence of disturbances, as the feed composition changes on a regular basis. The dynamic model is used for developing transfer function models of two potential control structures. Pairing of inputs and outputs is performed based upon the Relative Gain Array (RGA) and PI controllers were designed for each control structure. The controller performance was then compared in simulation studies. From our results, control structure 2 performed better than control structure 1. The main advantage of CS2 over CS1 is noticed in the simulation of feed composition disturbance rejection, where CS2 returns all variables back to steady state within 3 hrs while it take CS1 more than 20 hrs to return the temperature variables back to steady state.
Download or read book Advanced Distillation Technologies written by Anton A. Kiss and published by John Wiley & Sons. This book was released on 2013-02-26 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distillation has historically been the main method for separating mixtures in the chemical process industry. However, despite the flexibility and widespread use of distillation processes, they still remain extremely energy inefficient. Increased optimization and novel distillation concepts can deliver substantial benefits, not just in terms of significantly lower energy use, but also in reducing capital investment and improving eco-efficiency. While likely to remain the separation technology of choice for the next few decades, there is no doubt that distillation technologies need to make radical changes in order to meet the demands of the energy-conscious society. Advanced Distillation Technologies: Design, Control and Applications gives a deep and broad insight into integrated separations using non-conventional arrangements, including both current and upcoming process intensification technologies. It includes: Key concepts in distillation technology Principles of design, control, sizing and economics of distillation Dividing-wall column (DWC) – design, configurations, optimal operation and energy efficient and advanced control DWC applications in ternary separations, azeotropic, extractive and reactive distillation Heat integrated distillation column (HIDiC) – design, equipment and configurations Heat-pump assisted applications (MVR, TVR, AHP, CHRP, TAHP and others) Cyclic distillation technology – concepts, modeling approach, design and control issues Reactive distillation – fundamentals, equipment, applications, feasibility scheme Results of rigorous simulations in Mathworks Matlab & Simulink, Aspen Plus, Dynamics and Custom Modeler Containing abundant examples and industrial case studies, this is a unique resource that tackles the most advanced distillation technologies – all the way from the conceptual design to practical implementation. The author of Advanced Distillation Technologies, Dr. Ir. Anton A. Kiss, has been awarded the Hoogewerff Jongerenprijs 2013. Find out more (website in Dutch)...
Download or read book Distillation written by Andrzej Gorak and published by Academic Press. This book was released on 2014-07-22 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distillation: Fundamentals and Principles — winner of the 2015 PROSE Award in Chemistry & Physics — is a single source of authoritative information on all aspects of the theory and practice of modern distillation, suitable for advanced students and professionals working in a laboratory, industrial plants, or a managerial capacity. It addresses the most important and current research on industrial distillation, including all steps in process design (feasibility study, modeling, and experimental validation), together with operation and control aspects. This volume features an extra focus on the conceptual design of distillation. - Winner of the 2015 PROSE Award in Chemistry & Physics from the Association of American Publishers - Practical information on the newest development written by recognized experts - Coverage of a huge range of laboratory and industrial distillation approaches - Extensive references for each chapter facilitates further study
Download or read book Process Intensification written by Fernando Israel Gómez-Castro and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-10-21 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intensified processes have found widespread application in the chemical and petrochemical industries. The use of intensified systems allows for a reduction of operating costs and supports the “greening” of chemical processes. However, the design of intensified equipment requires special methodologies. This book describes the fundamentals and applications of these design methods, making it a valuable resource for use in both industry and academia.
Download or read book Dynamics and Control of Chemical Reactors Distillation Columns and Batch Processes DYCORD 95 written by J.B. Rawlings and published by Elsevier. This book was released on 2014-05-23 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three important areas of process dynamics and control: chemical reactors, distillation columns and batch processes are the main topics of discussion and evaluation at the IFAC Symposium on Dynamics and Control of Chemical Reactors, Distillation Columns and Batch Processes (DYCORD '95). This valuable publication was produced from the latest in the series, providing a detailed assessment of developments of key technologies within the field of process dynamics and control.
Download or read book Distillation Design and Control Using Aspen Simulation written by William L. Luyben and published by John Wiley & Sons. This book was released on 2006-04-20 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely treatment of distillationcombining steady-state designand dynamic controllability As the world continues to seek new sources of energy, the distillation process remains one of the most important separation methods in the chemical, petroleum, and energy industries. And as new renewable sources of energy and chemical feedstocks become more universally utilized, the issues of distillation design and control will remain vital to a future sustainable lifestyle. Distillation Design and Control Using Aspen Simulation introduces the current status and future implications of this vital technology from the dual perspectives of steady-state design and dynamics. Where traditional design texts have focused mainly on the steady-state economic aspects of distillation design, William Luyben also addresses such issues as dynamic performance in the face of disturbances. Utilizing the commercial simulators Aspen Plus and Aspen Dynamics, the text guides future and practicing chemical engineers first in the development of optimal steady-state designs of distillation systems, and then in the development of effective control structures. Unique features of the text include: * In-depth coverage of the dynamics of column design to help develop effective control structures for distillation columns * Development of rigorous simulations of single distillation columns and sequences of columns * Coverage of design and control of petroleum fractionators Encompassing nearly four decades of research and practical developments in this dynamic field, the text represents an important reference for both students and experienced engineers faced with distillation problems.
Download or read book 11th International Symposium on Process Systems Engineering PSE2012 written by Iftekhar A Karimi and published by Elsevier. This book was released on 2012-09-09 with total page 1804 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the PSE community continues its focus on understanding, synthesizing, modeling, designing, simulating, analyzing, diagnosing, operating, controlling, managing, and optimizing a host of chemical and related industries using the systems approach, the boundaries of PSE research have expanded considerably over the years. While early PSE research was largely concerned with individual units and plants, the current research spans wide ranges of scales in size (molecules to processing units to plants to global multinational enterprises to global supply chain networks; biological cells to ecological webs) and time (instantaneous molecular interactions to months of plant operation to years of strategic planning). The changes and challenges brought about by increasing globalization and the the common global issues of energy, sustainability, and environment provide the motivation for the theme of PSE2012: Process Systems Engineering and Decision Support for the Flat World. Each theme includes an invited chapter based on the plenary presentation by an eminent academic or industrial researcher Reports on the state-of-the-art advances in the various fields of process systems engineering Addresses common global problems and the research being done to solve them
Download or read book CHEMICAL PROCESS MODELLING AND COMPUTER SIMULATION written by AMIYA K. JANA and published by PHI Learning Pvt. Ltd.. This book was released on 2011-11-05 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and thoroughly revised text, now in its second edition, continues to present the fundamental concepts of how mathematical models of chemical processes are constructed and demonstrate their applications to the simulation of two of the very important chemical engineering systems: the chemical reactors and distillation systems. The book provides an integrated treatment of process description, mathematical modelling and dynamic simulation of realistic problems, using the robust process model approach and its simulation with efficient numerical techniques. Theoretical background materials on activity coefficient models, equation of state models, reaction kinetics, and numerical solution techniques—needed for the development of mathematical models—are also addressed in the book. The topics of discussion related to tanks, heat exchangers, chemical reactors (both continuous and batch), biochemical reactors (continuous and fed-batch), distillation columns (continuous and batch), equilibrium flash vaporizer, and refinery debutanizer column contain several worked-out examples and case studies to teach students how chemical processes can be measured and monitored using computer programming. The new edition includes two more chapters—Reactive Distillation Column and Vaporizing Exchangers—which will further strengthen the text. This book is designed for senior level undergraduate and first-year postgraduate level courses in “Chemical Process Modelling and Simulation”. The book will also be useful for students of petrochemical engineering, biotechnology, and biochemical engineering. It can serve as a guide for research scientists and practising engineers as well.
Download or read book Integrated Reaction and Separation Operations written by Henner Schmidt-Traub and published by Springer Science & Business Media. This book was released on 2007-12-29 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Economic needs as well as ecological demands are major driving forces in improving chemical processes and plants. To meet these goals processes have to be intensified in order to get products of higher quality, to increase yield by reducing or even suppressing by-products and to minimise energy consumption. A preferred principle for such intensifications is process - tegration, especially integration of reaction and separation operations. S- entific research in this field has been boosted by certain extremely succe- ful examples like the Eastman-Kodak process for methyl acetate or the MTBE process which are milestones for this method. In 2002 the German Research Foundation defined process integration as one of the major - search topics for the next decade. In 1998 the Department of Biochemical- and Chemical Engineering at the University of Dortmund decided to pool its activities for concerted - forts in process integration and to form a joint research cluster. Our interest was to find out the general challenges as well as obstacles of integrated processes and to work out methods for their design and valuation. Soon it became clear that theoretical work only cannot give reasonable answers.
Download or read book Nonlinear Model Reduction and Control of Multiple Time Scale Chemical Processes written by Nishith Pramod Vora and published by . This book was released on 2000 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
