Download or read book Geometric Control of Mechanical Systems written by Francesco Bullo and published by Springer. This book was released on 2019-06-12 with total page 727 pages. Available in PDF, EPUB and Kindle. Book excerpt: The area of analysis and control of mechanical systems using differential geometry is flourishing. This book collects many results over the last decade and provides a comprehensive introduction to the area.

Download or read book Modeling and Control of Vibration in Mechanical Systems written by Chunling Du and published by CRC Press. This book was released on 2018-09-03 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the ox carts and pottery wheels the spacecrafts and disk drives, efficiency and quality has always been dependent on the engineer’s ability to anticipate and control the effects of vibration. And while progress in negating the noise, wear, and inefficiency caused by vibration has been made, more is needed. Modeling and Control of Vibration in Mechanical Systems answers the essential needs of practitioners in systems and control with the most comprehensive resource available on the subject. Written as a reference for those working in high precision systems, this uniquely accessible volume: Differentiates between kinds of vibration and their various characteristics and effects Offers a close-up look at mechanical actuation systems that are achieving remarkably high precision positioning performance Includes techniques for rejecting vibrations of different frequency ranges Covers the theoretical developments and principles of control design with detail elaborate enough that readers will be able to apply the techniques with the help of MATLAB® Details a wealth of practical working examples as well as a number of simulation and experimental results with comprehensive evaluations The modern world’s ever-growing spectra of sophisticated engineering systems such as hard disk drives, aeronautic systems, and manufacturing systems have little tolerance for unanticipated vibration of even the slightest magnitude. Accordingly, vibration control continues to draw intensive focus from top control engineers and modelers. This resource demonstrates the remarkable results of that focus to date, and most importantly gives today’s researchers the technology that they need to build upon into the future. Chunling Du is currently researching modeling and advanced servo control of hard disk drives at the Data Storage Institute in Singapore. Lihua Xie is the Director of the Centre for Intelligent Machines and a professor at Nanyang Technological University in Singapore.

Download or read book Design and Modeling of Mechanical Systems written by Mohamed Haddar and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering.

Download or read book Advanced Sliding Mode Control for Mechanical Systems written by Jinkun Liu and published by Springer Science & Business Media. This book was released on 2012-09-07 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Advanced Sliding Mode Control for Mechanical Systems: Design, Analysis and MATLAB Simulation" takes readers through the basic concepts, covering the most recent research in sliding mode control. The book is written from the perspective of practical engineering and examines numerous classical sliding mode controllers, including continuous time sliding mode control, discrete time sliding mode control, fuzzy sliding mode control, neural sliding mode control, backstepping sliding mode control, dynamic sliding mode control, sliding mode control based on observer, terminal sliding mode control, sliding mode control for robot manipulators, and sliding mode control for aircraft. This book is intended for engineers and researchers working in the field of control. Dr. Jinkun Liu works at Beijing University of Aeronautics and Astronautics and Dr. Xinhua Wang works at the National University of Singapore.

Download or read book Non linear Control for Underactuated Mechanical Systems written by Isabelle Fantoni and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the application of modern control theory to some important underactuated mechanical systems, from the inverted pendulum to the helicopter model. It will help readers gain experience in the modelling of mechanical systems and familiarize with new control methods for non-linear systems.

Download or read book PDE Modeling and Boundary Control for Flexible Mechanical System written by Zhijie Liu and published by Springer Nature. This book was released on 2020-03-16 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive review of fundamental issues in the dynamical modeling and vibration control design for several flexible mechanical systems, such as flexible satellites, flexible aerial refueling hoses, and flexible three-dimensional manipulators. Offering an authoritative reference guide to the dynamics and control of flexible mechanical systems, it equips readers to solve a host of problems concerning these systems. It provides not only a complete overview of flexible systems, but also a better understanding of the technical levels involved. The book is divided into ten chapters: Chapters 1 and 2 lay the foundations, while the remaining chapters explore several independent yet related topics in detail. The book’s final chapter presents conclusions and recommendations for future research. Given its scope, the book is intended for researchers, graduate students, and engineers whose work involves control systems, flexible mechanical systems, and related areas.

Download or read book The Mechanical Systems Design Handbook written by Yildirim Hurmuzlu and published by CRC Press. This book was released on 2017-12-19 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a specific focus on the needs of the designers and engineers in industrial settings, The Mechanical Systems Design Handbook: Modeling, Measurement, and Control presents a practical overview of basic issues associated with design and control of mechanical systems. In four sections, each edited by a renowned expert, this book answers diverse questions fundamental to the successful design and implementation of mechanical systems in a variety of applications. Manufacturing addresses design and control issues related to manufacturing systems. From fundamental design principles to control of discrete events, machine tools, and machining operations to polymer processing and precision manufacturing systems. Vibration Control explores a range of topics related to active vibration control, including piezoelectric networks, the boundary control method, and semi-active suspension systems. Aerospace Systems presents a detailed analysis of the mechanics and dynamics of tensegrity structures Robotics offers encyclopedic coverage of the control and design of robotic systems, including kinematics, dynamics, soft-computing techniques, and teleoperation. Mechanical systems designers and engineers have few resources dedicated to their particular and often unique problems. The Mechanical Systems Design Handbook clearly shows how theory applies to real world challenges and will be a welcomed and valuable addition to your library.

Download or read book Kinematics and Dynamics of Multi Body Systems written by J. Angeles and published by Springer. This book was released on 2014-05-04 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Three main disciplines in the area of multibody systems are covered: kinematics, dynamics, and control, as pertaining to systems that can be modelled as coupling or rigid bodies. The treatment is intended to give a state of the art of the topics discussed.

Download or read book Dynamic Response of Linear Mechanical Systems written by Jorge Angeles and published by Springer Science & Business Media. This book was released on 2011-09-15 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Response of Linear Mechanical Systems: Modeling, Analysis and Simulation can be utilized for a variety of courses, including junior and senior-level vibration and linear mechanical analysis courses. The author connects, by means of a rigorous, yet intuitive approach, the theory of vibration with the more general theory of systems. The book features: A seven-step modeling technique that helps structure the rather unstructured process of mechanical-system modeling A system-theoretic approach to deriving the time response of the linear mathematical models of mechanical systems The modal analysis and the time response of two-degree-of-freedom systems—the first step on the long way to the more elaborate study of multi-degree-of-freedom systems—using the Mohr circle Simple, yet powerful simulation algorithms that exploit the linearity of the system for both single- and multi-degree-of-freedom systems Examples and exercises that rely on modern computational toolboxes for both numerical and symbolic computations as well as a Solutions Manual for instructors, with complete solutions of a sample of end-of-chapter exercises Chapters 3 and 7, on simulation, include in each “Exercises” section a set of miniprojects that require code-writing to implement the algorithms developed in these chapters

Download or read book Analysis and Control of Underactuated Mechanical Systems written by Amal Choukchou-Braham and published by Springer Science & Business Media. This book was released on 2013-11-18 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides readers with tools for the analysis, and control of systems with fewer control inputs than degrees of freedom to be controlled, i.e., underactuated systems. The text deals with the consequences of a lack of a general theory that would allow methodical treatment of such systems and the ad hoc approach to control design that often results, imposing a level of organization whenever the latter is lacking. The authors take as their starting point the construction of a graphical characterization or control flow diagram reflecting the transmission of generalized forces through the degrees of freedom. Underactuated systems are classified according to the three main structures by which this is found to happen—chain, tree, and isolated vertex—and control design procedures proposed. The procedure is applied to several well-known examples of underactuated systems: acrobot; pendubot; Tora system; ball and beam; inertia wheel; and robotic arm with elastic joint. The text is illustrated with MATLABsup®/sup/Simulink® simulations that demonstrate the effectiveness of the methods detailed./ppReaders interested in aircraft, vehicle control or various forms of walking robot will be able to learn from iUnderactuated Mechanical Systems

Download or read book Modelling and Control of Mechanical Systems written by A Astolfi and published by World Scientific. This book was released on 1997-06-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a general picture of the current trends in the area of automatic control, with particular emphasis on practical problems in the mechanical field. For this reason, besides theoretical contributions, it presents selected lectures on recent developments interesting from an industrial point of view, such as automotive, robotics, motion control, and electrical drives. Contents:Interconnected Mechanical Systems, Part I: Geometry of Interconnection and Implicit Hamiltonian SystemsInterconnected Mechanical Systems, Part II: The Dynamics of Spatial Mechanical NetworksA Network-Theoretical and Diakoptical Approach to Multi-Body SystemsReview of Results on Variable Structure Control for Application to Mechanical SystemsOn the Controllability and Observability Function of Nonlinear ControlPassivity-Based Control of Euler–Lagrange Systems: Applications to Robots, AC Motors and Power ConvertersThe Analysis of Motorcycle Dynamics and ControlA Mechanical Network Approach to Performance Capabilities of Passive SuspensionsFuzzy Logic Control of a Variable Displacement Hydraulic PumpExperimental Identification of Robot ManipulatorsSome Results in the Control of Flexible Mechanical SystemsThe Perfect Tracking Problem for Nonminimum Phase Systems: Applications to Flexible-Link RobotsOn Some Structural Properties of General Manipulation SystemsDesign of Parallel Force/Position Controllers and Observers for Robot ManipulatorsMotion Equations of Mechanical Systems Subject to ImpactsHybrid Feedback Strategies for the Control of Juggling RobotsInvariant Manifolds: A Tool for StabilisationInvariant Manifold Techniques for Control of Underactuated Mechanical SystemsDiscontinuous Control of the Nonholonomic IntegratorComputational Models for the Simulation of Contact Phenomena in Multibody Systems Readership: Engineers (automatic control). Reviews:“This collection will be of interest to anyone working in the area of mechanical systems and their control.”Mathematics Abstracts

Download or read book Identification and Control of Mechanical Systems written by Jer-Nan Juang and published by Cambridge University Press. This book was released on 2001-08-06 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The control of vibrating systems is a significant issue in the design of aircraft, spacecraft, bridges and high-rise buildings. This 2001 book discusses the control of vibrating systems, integrating structural dynamics, vibration analysis, modern control and system identification. Integrating these subjects is an important feature in that engineers will need only one book, rather than several texts or courses, to solve vibration control problems. The book begins with a review of basic mathematics needed to understand subsequent material. Chapters then cover more recent and valuable developments in aerospace control and identification theory, including virtual passive control, observer and state-space identification, and data-based controller synthesis. Many practical issues and applications are addressed, with examples showing how various methods are applied to real systems. Some methods show the close integration of system identification and control theory from the state-space perspective, rather than from the traditional input-output model perspective of adaptive control. This text will be useful for advanced undergraduate and beginning graduate students in aerospace, mechanical and civil engineering, as well as for practising engineers.

Download or read book Model Aided Diagnosis of Mechanical Systems written by Hans Günther Natke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Diagnosis of technical systems is important, concerning safety and economics. Monitoring and diagnosis, especially in remote control systems, needs holistic models, as described here. This book describes the fundamentals for technical diagnosis as well as state-of-art tools. Model-based diagnosis and knowledge based diagnosis, fundamentals in decision-making and assessment are included. The foundation of diagnosis for applications is given. The book is written for the expert practising engineer in research and industrial applications.

Download or read book Dynamic Modeling and Control of Engineering Systems written by Bohdan T. Kulakowski and published by Cambridge University Press. This book was released on 2014-04-30 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is ideal for an undergraduate course in Engineering System Dynamics and Controls. It is intended to provide the reader with a thorough understanding of the process of creating mathematical (and computer-based) models of physical systems. The material is restricted to lumped parameter models, which are those models in which time is the only independent variable. It assumes a basic knowledge of engineering mechanics and ordinary differential equations. The new edition has expanded topical coverage and many more new examples and exercises.

Download or read book Introduction to Dynamics and Control in Mechanical Engineering Systems written by Cho W. S. To and published by John Wiley & Sons. This book was released on 2016-05-02 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the first books to provide in-depth and systematic application of finite element methods to the field of stochastic structural dynamics The parallel developments of the Finite Element Methods in the 1950’s and the engineering applications of stochastic processes in the 1940’s provided a combined numerical analysis tool for the studies of dynamics of structures and structural systems under random loadings. In the open literature, there are books on statistical dynamics of structures and books on structural dynamics with chapters dealing with random response analysis. However, a systematic treatment of stochastic structural dynamics applying the finite element methods seems to be lacking. Aimed at advanced and specialist levels, the author presents and illustrates analytical and direct integration methods for analyzing the statistics of the response of structures to stochastic loads. The analysis methods are based on structural models represented via the Finite Element Method. In addition to linear problems the text also addresses nonlinear problems and non-stationary random excitation with systems having large spatially stochastic property variations.

Download or read book Mechanical Systems written by Roger F. Gans and published by Springer. This book was released on 2014-09-02 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential textbook concerns analysis and control of engineering mechanisms, which includes almost any apparatus with moving parts used in daily life, from musical instruments to robots. A particular characteristic of this book is that it presents with considerable breadth and rigor both vibrations and controls. Many contemporary texts combine both of these topics in a single, one term course. This text supports the more favorable circumstance where the material is covered in a one year sequence contains enough material for a two semester sequence, but it can also be used in a single semester course combining two topics. “Mechanical Systems: A Unified Approach to Vibrations and Controls” presents a common notation and approach to these closely related areas. Examples from the both vibrations and controls components are integrated throughout this text.

Download or read book Modelling of mechanical systems written by and published by . This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: