Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 29 (thesis year 1984) a total of 12,637 theses titles from 23 Canadian and 202 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 29 reports theses submitted in 1984, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.

Download or read book Process Mineralogy written by Megan Becker and published by . This book was released on 2016-12-01 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mineral Crushing and Grinding Circuits written by A. J. Lynch and published by . This book was released on 1977 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Expert Systems in Mineral and Metal Processing written by A. J. Niemi and published by Elsevier. This book was released on 2016-09-01 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Within the metal and mining industries, the use of expert systems for monitoring and control is on the increase. The content of each paper had to include both expert systems, neural networks or fuzzy control. The papers were evenly contributed from industry, universities and research institutes, thus this book provides a valuable insight into the theoretical as well as the practical applications currently in use within the industry.

Download or read book Modeling and Simulation of Mineral Processing Systems written by R. Peter King and published by Elsevier. This book was released on 2012-12-02 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. R. Peter King covers the field of quantitative modeling of mineral processing equipment and the use of these models to simulate the actual behavior of ore dressing and coal washing as they are configured to work in industrial practice. The material is presented in a pedagogical style that is particularly suitable for readers who wish to learn the wide variety of modeling methods that have evolved in this field. The models vary widely from one unit type to another. As a result each model is described in some detail. Wherever possible model structure is related to the underlying physical processes that govern the behaviour of particulate material in the processing equipment. Predictive models are emphasised throughout so that, when combined, they can be used to simulate the operation of complex mineral processing flowsheets. The development of successful simulation techniques is a major objective of the work that is covered in the text. - Covers all aspects of modeling and simulation - Provides all necessary tools to put the theory into practice

Download or read book Design and Installation of Comminution Circuits written by Andrew L. Mular and published by Random House Trade. This book was released on 1982 with total page 1078 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mineral Processing Design and Operation written by Ashok Gupta and published by Elsevier. This book was released on 2006-06-26 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral Processing Design and Operations is expected to be of use to the design engineers engaged in the design and operation of mineral processing plants and including those process engineers who are engaged in flow-sheets development.Provides an orthodox statistical approach that helps in the understanding of the designing of unit processes. The subject of mineral processing has been treated on the basis of unit processes that are subsequently developed and integrated to form a complete strategy for mineral beneficiation. Unit processes of crushing, grinding, solid–liquid separation, flotation are therefore described in some detail so that a student at graduate level and operators at plants will find this book useful. Mineral Processing Design and Operations describes the strategy of mathematical modeling as a tool for more effective controlling of operations, looking at both steady state and dynamic state models.* Containing 18 chapters that have several worked out examples to clarify process operations* Filling a gap in the market by providing up-to-date research on mineral processing* Describes alternative approaches to design calculation, using example calculations and problem exercises

Download or read book Proceedings of the National Seminar on Recent Techniques in Mineral Processing Waste and Environment Management written by and published by Allied Publishers. This book was released on 2000 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Automation in Mining Mineral and Metal Processing 2004 written by Dominique Sauter and published by Elsevier. This book was released on 2006-02-21 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx. 482 pages

Download or read book Advanced Control and Supervision of Mineral Processing Plants written by Daniel Sbárbaro and published by Springer Science & Business Media. This book was released on 2010-08-20 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Control and Supervision of Mineral Processing Plants describes the use of dynamic models of mineral processing equipment in the design of control, data reconciliation and soft-sensing schemes; through examples, it illustrates tools integrating simulation and control system design for comminuting circuits and flotation columns. Coverage is given to the design of soft sensors based on either single-point measurements or more complex measurements like images. Issues concerning data reconciliation and its employment in the creation of instrument architecture and fault diagnosis are surveyed. In consideration of the widespread use of distributed control and information management systems in mineral processing, the book describes the platforms and toolkits available for implementing such systems. Applications of the techniques described in real plants are used to highlight their benefits; information for all of the examples, together with supporting MATLAB® code can be found at www.springer.com/978-1-84996-105-9.

Download or read book Computer Applications in the Mineral Industries written by Heping Xie and published by CRC Press. This book was released on 2020-12-17 with total page 889 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers the use of computer applications in the mineral industries, encompassing topics such as the use of computer visualization in mining systems and aspects such as ventilation and safety.

Download or read book Copper 87 Mineral processing and process control written by and published by . This book was released on 1988 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mineral Processing Plant Design Practice and Control written by Andrew L. Mular and published by SME. This book was released on 2002 with total page 1200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Based on 138 proceedings papers from October 2002, this broad reference will become the new standard text for colleges and will become a must for engineers, consultants, suppliers, manufacturers.

Download or read book Mineral Processing Technology written by Barry A. Wills and published by Elsevier. This book was released on 2013-10-22 with total page 804 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides practising engineers and students of mineral processing, metallurgy and mining with a review of the common ore-processing techniques utilized in modern installations. Each chapter encompasses all the recent technical developments within each field, and discusses new equipment and process routes. This latest edition has been thoroughly revised and updated to include important new sections on economics, use of computers and developments in froth flotation. A further feature is a valuable collection of microcomputer programs, written in ANSI BASIC, for the solution of numerical mineral processing problems. The work is fully referenced up to 1987, indexed, and SI units are used throughout.

Download or read book Wills Mineral Processing Technology written by Barry A. Wills and published by Elsevier. This book was released on 2011-04-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wills' Mineral Processing Technology provides practising engineers and students of mineral processing, metallurgy and mining with a review of all of the common ore-processing techniques utilized in modern processing installations. Now in its Seventh Edition, this renowned book is a standard reference for the mineral processing industry. Chapters deal with each of the major processing techniques, and coverage includes the latest technical developments in the processing of increasingly complex refractory ores, new equipment and process routes. This new edition has been prepared by the prestigious J K Minerals Research Centre of Australia, which contributes its world-class expertise and ensures that this will continue to be the book of choice for professionals and students in this field.This latest edition highlights the developments and the challenges facing the mineral processor, particularly with regard to the environmental problems posed in improving the efficiency of the existing processes and also in dealing with the waste created. The work is fully indexed and referenced. - The classic mineral processing text, revised and updated by a prestigious new team - Provides a clear exposition of the principles and practice of mineral processing, with examples taken from practice - Covers the latest technological developments and highlights the challenges facing the mineral processor - New sections on environmental problems, improving the efficiency of existing processes and dealing with waste.

Download or read book Wills Mineral Processing Technology written by Barry A. Wills and published by Butterworth-Heinemann. This book was released on 2015-09-01 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wills' Mineral Processing Technology: An Introduction to the Practical Aspects of Ore Treatment and Mineral Recovery has been the definitive reference for the mineral processing industry for over thirty years. This industry standard reference provides practicing engineers and students of mineral processing, metallurgy, and mining with practical information on all the common techniques used in modern processing installations. Each chapter is dedicated to a major processing procedure—from underlying principles and technologies to the latest developments in strategies and equipment for processing increasingly complex refractory ores. The eighth edition of this classic reference enhances coverage of practical applications via the inclusion of new material focused on meeting the pressing demand for ever greater operational efficiency, while addressing the pivotal challenges of waste disposal and environmental remediation. Advances in automated mineralogy and analysis and high-pressure grinding rolls are given dedicated coverage. The new edition also contains more detailed discussions of comminution efficiency, classification, modeling, flocculation, reagents, liquid-solid separations, and beneficiation of phosphate, and industrial materials. Finally, the addition of new examples and solved problems further facilitates the book's pedagogical role in the classroom. - Connects fundamentals with practical applications to benefit students and practitioners alike - Ensures relevance internationally with new material and updates from renowned authorities in the UK, Australia, and Canada - Introduces the latest technologies and incorporates environmental issues to place the subject of mineral processing in a contemporary context, addressing concerns of sustainability and cost effectiveness - Provides new case studies, examples, and figures to bring a fresh perspective to the field

Download or read book Advances in Comminution written by S. Komar Kawatra and published by SME. This book was released on 2006 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The 36 chapters are based on the 2006 SME symposium"--Page 4 de la couverture.