Download or read book Continuous System Modeling written by François E. Cellier and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Simulation have become endeavors central to all disciplines of science and engineering. They are used in the analysis of physical systems where they help us gain a better understanding of the functioning of our physical world. They are also important to the design of new engineering systems where they enable us to predict the behavior of a system before it is ever actually built. Modeling and simulation are the only techniques available that allow us to analyze arbitrarily non-linear systems accurately and under varying experimental conditions. Continuous System Modeling introduces the student to an important subclass of these techniques. They deal with the analysis of systems described through a set of ordinary or partial differential equations or through a set of difference equations. This volume introduces concepts of modeling physical systems through a set of differential and/or difference equations. The purpose is twofold: it enhances the scientific understanding of our physical world by codifying (organizing) knowledge about this world, and it supports engineering design by allowing us to assess the consequences of a particular design alternative before it is actually built. This text has a flavor of the mathematical discipline of dynamical systems, and is strongly oriented towards Newtonian physical science.

Download or read book System Design Modeling and Simulation written by Claudius Ptolemaeus and published by Lee & Seshia. This book was released on 2013-09-27 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a definitive introduction to models of computation for the design of complex, heterogeneous systems. It has a particular focus on cyber-physical systems, which integrate computing, networking, and physical dynamics. The book captures more than twenty years of experience in the Ptolemy Project at UC Berkeley, which pioneered many design, modeling, and simulation techniques that are now in widespread use. All of the methods covered in the book are realized in the open source Ptolemy II modeling framework and are available for experimentation through links provided in the book. The book is suitable for engineers, scientists, researchers, and managers who wish to understand the rich possibilities offered by modern modeling techniques. The goal of the book is to equip the reader with a breadth of experience that will help in understanding the role that such techniques can play in design.

Download or read book Distribution System Modeling and Analysis written by William H. Kersting and published by CRC Press. This book was released on 2001-08-31 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: For decades, distribution engineers did not have the sophisticated tools developed for analyzing transmission systems-often they had only their instincts. Things have changed, and we now have computer programs that allow engineers to simulate, analyze, and optimize distribution systems. Powerful as these programs are, however, without a real unders

Download or read book High Level System Modeling written by Ronald Waxman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: In system design, generation of high-level abstract models that can be closely associated with evolving lower-level models provides designers with the ability to incrementally `test' an evolving design against a model of a specification. Such high-level models may deal with areas such as performance, reliability, availability, maintainability, and system safety. Abstract models also allow exploration of the hardware versus software design space in an incremental fashion as a fuller, detailed design unfolds, leaving behind the old practice of hardware-software binding too early in the design process. Such models may also allow the inclusion of non-functional aspects of design (e.g. space, power, heat) in a simulatable information model dealing with the system's operation. This book addresses Model Generation and Application specifically in the following domains: Specification modeling (linking object/data modeling, behavior modeling, and activity modeling). Operational specification modeling (modeling the way the system is supposed to operate - from a user's viewpoint). Linking non-functional parameters with specification models. Hybrid modeling (linking performance and functional elements). Application of high-level modeling to hardware/software approaches. Mathematical analysis techniques related to the modeling approaches. Reliability modeling. Applications of High Level Modeling. Reducing High Level Modeling to Practice. High-Level System Modeling: Specification and Design Methodologies describes the latest research and practice in the modeling of electronic systems and as such is an important update for all researchers, design engineers and technical managers working in design automation and circuit design.

Download or read book Power System Modeling Computation and Control written by Joe H. Chow and published by John Wiley & Sons. This book was released on 2020-01-21 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides students with an understanding of the modeling and practice in power system stability analysis and control design, as well as the computational tools used by commercial vendors Bringing together wind, FACTS, HVDC, and several other modern elements, this book gives readers everything they need to know about power systems. It makes learning complex power system concepts, models, and dynamics simpler and more efficient while providing modern viewpoints of power system analysis. Power System Modeling, Computation, and Control provides students with a new and detailed analysis of voltage stability; a simple example illustrating the BCU method of transient stability analysis; and one of only a few derivations of the transient synchronous machine model. It offers a discussion on reactive power consumption of induction motors during start-up to illustrate the low-voltage phenomenon observed in urban load centers. Damping controller designs using power system stabilizer, HVDC systems, static var compensator, and thyristor-controlled series compensation are also examined. In addition, there are chapters covering flexible AC transmission Systems (FACTS)—including both thyristor and voltage-sourced converter technology—and wind turbine generation and modeling. Simplifies the learning of complex power system concepts, models, and dynamics Provides chapters on power flow solution, voltage stability, simulation methods, transient stability, small signal stability, synchronous machine models (steady-state and dynamic models), excitation systems, and power system stabilizer design Includes advanced analysis of voltage stability, voltage recovery during motor starts, FACTS and their operation, damping control design using various control equipment, wind turbine models, and control Contains numerous examples, tables, figures of block diagrams, MATLAB plots, and problems involving real systems Written by experienced educators whose previous books and papers are used extensively by the international scientific community Power System Modeling, Computation, and Control is an ideal textbook for graduate students of the subject, as well as for power system engineers and control design professionals.

Download or read book Systems Modeling Methodologies and Tools written by Antonio Puliafito and published by Springer. This book was released on 2018-10-16 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers ideas, methods, algorithms, and tools for the in-depth study of the performance and reliability of dependable fault-tolerant systems. The chapters identify the current challenges that designers and practitioners must confront to ensure the reliability, availability, and performance of systems, with special focus on their dynamic behaviors and dependencies. Topics include network calculus, workload and scheduling; simulation, sensitivity analysis and applications; queuing networks analysis; clouds, federations and big data; and tools. This collection of recent research exposes system researchers, performance analysts, and practitioners to a spectrum of issues so that they can address these challenges in their work.

Download or read book Modeling in Event B written by Jean-Raymond Abrial and published by Cambridge University Press. This book was released on 2010-05-13 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical introduction to this model-based formal method, containing a broad range of illustrative examples.

Download or read book Guide to Modeling and Simulation of Systems of Systems written by Bernard Zeigler and published by Springer Science & Business Media. This book was released on 2012-10-22 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: This user’s reference is a companion to the separate book also titled “Guide to Modelling and Simulation of Systems of Systems.” The principal book explicates integrated development environments to support virtual building and testing of systems of systems, covering in some depth the MS4 Modelling EnvironmentTM. This user’s reference provides a quick reference and exposition of the various concepts and functional features covered in that book. The topics in the user’s reference are grouped in alignment with the workflow displayed on the MS4 Modeling EnvironmentTM launch page, under the headings Atomic Models, System Entity Structure, Pruning SES, and Miscellaneous. For each feature, the reference discusses why we use it, when we should use it, and how to use it. Further comments and links to related features are also included.

Download or read book System Design Modeling and Metamodeling written by John P. van Gigch and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a venture in the worlds of modeling and of metamodeling. At this point, I will not reveal to readers what constitutes metamodeling. Suf fice it to say that the pitfalls and shortcomings of modeling can be cured only if we resort to a higher level of inquiry called metainquiry and metadesign. We reach this level by the process of abstraction. The book contains five chapters from my previous work, Applied General Systems Theory (Harper and Row, London and New York, First Edition 1974, Second Edition 1978). More than ten years after its publication, this material still appears relevant to the main thrust of system design. This book is dedicated to all those who are involved in changing the world for the better. In a way we all are involved in system design: from the city manager who struggles with the problems of mass transportation or the consolidation of a city and its suburbs to the social worker who tries to provide benefits to the urban poor. It includes the engineer who designs the shuttle rockets. It involves the politician engaged in drafting a bill to recycle containers, or one to prevent pesticide contamination of our food. The politician might even need system design to chart his or her own re-election campaign.

Download or read book Handbook of Dynamic System Modeling written by Paul A. Fishwick and published by CRC Press. This book was released on 2007-06-01 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topic of dynamic models tends to be splintered across various disciplines, making it difficult to uniformly study the subject. Moreover, the models have a variety of representations, from traditional mathematical notations to diagrammatic and immersive depictions. Collecting all of these expressions of dynamic models, the Handbook of Dynamic Sy

Download or read book An Introduction to System Modeling and Control written by John Chiasson and published by John Wiley & Sons. This book was released on 2022-03-22 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and straightforward exploration of the basic tools for the modeling, analysis, and design of control systems In An Introduction to System Modeling and Control, Dr. Chiasson delivers an accessible and intuitive guide to understanding modeling and control for students in electrical, mechanical, and aerospace/aeronautical engineering. The book begins with an introduction to the need for control by describing how an aircraft flies complete with figures illustrating roll, pitch, and yaw control using its ailerons, elevators, and rudder, respectively. The book moves on to rigid body dynamics about a single axis (gears, cart rolling down an incline) and then to modeling DC motors, DC tachometers, and optical encoders. Using the transfer function representation of these dynamic models, PID controllers are introduced as an effective way to track step inputs and reject constant disturbances. It is further shown how any transfer function model can be stabilized using output pole placement and on how two-degree of freedom controllers can be used to eliminate overshoot in step responses. Bode and Nyquist theory are then presented with an emphasis on how they give a quantitative insight into a control system's robustness and sensitivity. An Introduction to System Modeling and Control closes with chapters on modeling an inverted pendulum and a magnetic levitation system, trajectory tracking control using state feedback, and state estimation. In addition the book offers: A complete set of MATLAB/SIMULINK files for examples and problems included in the book. A set of lecture slides for each chapter. A solutions manual with recommended problems to assign. An analysis of the robustness and sensitivity of four different controller designs for an inverted pendulum (cart-pole). Perfect for electrical, mechanical, and aerospace/aeronautical engineering students, An Introduction to System Modeling and Control will also be an invaluable addition to the libraries of practicing engineers.

Download or read book System Dynamics Modeling with R written by Jim Duggan and published by Springer. This book was released on 2016-06-14 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new interdisciplinary work presents system dynamics as a powerful approach to enable analysts build simulation models of social systems, with a view toward enhancing decision making. Grounded in the feedback perspective of complex systems, the book provides a practical introduction to system dynamics, and covers key concepts such as stocks, flows, and feedback. Societal challenges such as predicting the impact of an emerging infectious disease, estimating population growth, and assessing the capacity of health services to cope with demographic change can all benefit from the application of computer simulation. This text explains important building blocks of the system dynamics approach, including material delays, stock management heuristics, and how to model effects between different systemic elements. Models from epidemiology, health systems, and economics are presented to illuminate important ideas, and the R programming language is used to provide an open-source and interoperable way to build system dynamics models. System Dynamics Modeling with R also describes hands-on techniques that can enhance client confidence in system dynamic models, including model testing, model analysis, and calibration. Developed from the author’s course in system dynamics, this book is written for undergraduate and postgraduate students of management, operations research, computer science, and applied mathematics. Its focus is on the fundamental building blocks of system dynamics models, and its choice of R as a modeling language make it an ideal reference text for those wishing to integrate system dynamics modeling with related data analytic methods and techniques.

Download or read book Adaptive Learning Methods for Nonlinear System Modeling written by Danilo Comminiello and published by Butterworth-Heinemann. This book was released on 2018-06-11 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adaptive Learning Methods for Nonlinear System Modeling presents some of the recent advances on adaptive algorithms and machine learning methods designed for nonlinear system modeling and identification. Real-life problems always entail a certain degree of nonlinearity, which makes linear models a non-optimal choice. This book mainly focuses on those methodologies for nonlinear modeling that involve any adaptive learning approaches to process data coming from an unknown nonlinear system. By learning from available data, such methods aim at estimating the nonlinearity introduced by the unknown system. In particular, the methods presented in this book are based on online learning approaches, which process the data example-by-example and allow to model even complex nonlinearities, e.g., showing time-varying and dynamic behaviors. Possible fields of applications of such algorithms includes distributed sensor networks, wireless communications, channel identification, predictive maintenance, wind prediction, network security, vehicular networks, active noise control, information forensics and security, tracking control in mobile robots, power systems, and nonlinear modeling in big data, among many others. This book serves as a crucial resource for researchers, PhD and post-graduate students working in the areas of machine learning, signal processing, adaptive filtering, nonlinear control, system identification, cooperative systems, computational intelligence. This book may be also of interest to the industry market and practitioners working with a wide variety of nonlinear systems. Presents the key trends and future perspectives in the field of nonlinear signal processing and adaptive learning. Introduces novel solutions and improvements over the state-of-the-art methods in the very exciting area of online and adaptive nonlinear identification. Helps readers understand important methods that are effective in nonlinear system modelling, suggesting the right methodology to address particular issues.

Download or read book Modeling Multi Level Systems written by Octavian Iordache and published by Springer Science & Business Media. This book was released on 2011-02-07 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to modeling of multi-level complex systems, a challenging domain for engineers, researchers and entrepreneurs, confronted with the transition from learning and adaptability to evolvability and autonomy for technologies, devices and problem solving methods. Chapter 1 introduces the multi-scale and multi-level systems and highlights their presence in different domains of science and technology. Methodologies as, random systems, non-Archimedean analysis, category theory and specific techniques as model categorification and integrative closure, are presented in chapter 2. Chapters 3 and 4 describe polystochastic models, PSM, and their developments. Categorical formulation of integrative closure offers the general PSM framework which serves as a flexible guideline for a large variety of multi-level modeling problems. Focusing on chemical engineering, pharmaceutical and environmental case studies, the chapters 5 to 8 analyze mixing, turbulent dispersion and entropy production for multi-scale systems. Taking inspiration from systems sciences, chapters 9 to 11 highlight multi-level modeling potentialities in formal concept analysis, existential graphs and evolvable designs of experiments. Case studies refer to separation flow-sheets, pharmaceutical pipeline, drug design and development, reliability management systems, security and failure analysis. Perspectives and integrative points of view are discussed in chapter 12. Autonomous and viable systems, multi-agents, organic and autonomic computing, multi-level informational systems, are revealed as promising domains for future applications. Written for: engineers, researchers, entrepreneurs and students in chemical, pharmaceutical, environmental and systems sciences engineering, and for applied mathematicians.

Download or read book System Dynamics written by Juan Martín García and published by . This book was released on 2020-05-28 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book allows the reader to acquire step-by-step in a time-efficient and uncomplicated the knowledge in the formation and construction of dynamic models using Vensim. Many times, the models are performed with minimal current data and very few historical data, the simulation models that the student will design in this course accommodate these analyses, with the construction of realistic hypotheses and elaborate behavior models. That's done with the help of software Vensim that helps the construction of the models as well as performing model simulations. At the end of the book, the reader is able to: - Describe the components of a complex system. - Diagnose the natural evolution of the system under analysis. - Create a model of the system and present it using the simulation software. - Carry out simulations with the model, in order to predict the behavior of the system. Content Environmental Area 1. Population Growth 2. Ecology of a Natural Reserve 3. Effects of the Intensive Farming 4. The Fishery of Shrimp 5. Rabbits and Foxes 6. A Study of Hogs 7. Ingestion of Toxins 8. The Barays of Angkor 9. The Golden Number Management Area 10. Production and Inventory 11. CO2 Emissions 12. How to Work More and Better 13. Faults 14. Project Dynamics 15. Innovatory Companies 16. Quality Control 17. The impact of a Business Plan Social Area 18. Filling a Glass 19. A Catastrophe Study 20. The Young Ambitious Worker 21. Development of an Epidemic 22. The Dynamics of Two Clocks Mechanical Area 23. The Tank 24. Study of the Oscillatory Movements 25. Design of a Chemical Reactor 26. The Butterfly Effect 27. The Mysterious Lamp Advanced Exercises (Vensim PLE PLUS) 28. Import data from an Excel file 29. Building Games and Learning Labs 30. Interactive models 31. Input Output Controls 32. Sensitivity Analysis Annex I. Guide to creating a model II. Functions, Tables and Delays III. Frequently Asked Questions FAQs IV. Download the models of this book The author Juan Martín García is teacher and a worldwide recognized expert in System Dynamics, with more than twenty years of experience in this field. Ph.D. Industrial Engineer (Spain) and Postgraduated Diploma in Business Dynamics at Massachusetts Institute of Technology MIT (USA). He teaches Vensim online courses in http://vensim.com/vensim-online-courses/ based on System Dynamics.

Download or read book System Modeling and Simulation written by Frank L. Severance and published by John Wiley & Sons. This book was released on 2001-08-08 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text teaches, by example, how to create models, simulate performance simulations and analyse results. It takes a quantitative approach and covers a range of event driven and time driven models. In addition it is software independent - to make implementations as generic as possible, which allows for experimentation with different implementations. * Includes 100 worked examples * Incorporates a number of disciplines in modeling process * Algorithms and programs available on associated web site

Download or read book Wastewater Collection System Modeling and Design written by Haestad Methods, Inc and published by . This book was released on 2004 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disc 1 contains an academic version of SewerCAD stand-alone software, featuring exam booklet for continuing eduction credits, and user manual.