Download or read book Hydrodynamic Characteristics and Pollutant Transport in Rivers and Nearshore Environments written by Biyun Guo and published by Frontiers Media SA. This book was released on 2024-03-01 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the development of societies and economies, the process of industrialization and urban modernization is accelerating, urban populations are increasing, and more and more wastewater is generated and released. Large quantities of hazardous industrial and agricultural wastewater and domestic sewage are discharged directly into reservoirs, lakes, rivers and the sea, without adequate treatment. The wide range of pollutants discharged can degrade, interact, and transform in aquatic environments. When light, temperature, nutrients and other natural conditions are suitable, it is common for algal species to burst into bloom, causing serious damage to the ecological environment of the receiving water body. As the flux of river discharge into the sea increases year by year, the deterioration of coastal water environments accelerates. Meanwhile, variations in climate and vegetation impact basin hydrological proceses and river runoff into the sea.

Download or read book Modeling Indoor Air Pollution written by Darrell W. Pepper and published by Imperial College Press. This book was released on 2009 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emission of pollutants and their accumulation due to poor ventilation and air exchange are serious problems currently under investigation by many researchers. Of particular concern are issues involving air quality within buildings. Toxic fumes and airborne diseases are known to produce undesirable odors, eye and nose irritations, sickness, and occasionally death. Other products such as tobacco smoke and carbon monoxide can also have serious health effects on people exposed to a poorly ventilated environment; studies indicate that indirect or passive smoking can also lead to lung cancer.Design for prevention or remediation of indoor air pollution requires expertise in optimizing geometrical configurations; knowledge of HVAC systems, perceived or expected contaminants and source locations; and economics. Much of the design concept involves ways in which to optimize the benefits or balance the advantages and disadvantages of various configurations and equipment. The fact that a room or building will conceivably become contaminated is generally an accepted fact OCo to what extent indoor air pollution will become critical is not really known until it happens.A series of numerical models that run in MATLAB are described in the text and placed on the Web. These models include the finite difference method, finite volume method, finite element method, the boundary element method, particle-in-cell, meshless methods, and lagrangian particle transport. In addition, all example problems can be run using COMSOL, a commercial finite-element-based computer code with a great deal of flexibility and application. By accessing AutoCad ICES or DWG file structures, COMSOL permits a building floor plan to be captured and the interior walls discretized into elements.

Download or read book Modeling Groundwater Flow and Contaminant Transport written by Jacob Bear and published by Springer Science & Business Media. This book was released on 2010-01-18 with total page 851 pages. Available in PDF, EPUB and Kindle. Book excerpt: In many parts of the world, groundwater resources are under increasing threat from growing demands, wasteful use, and contamination. To face the challenge, good planning and management practices are needed. A key to the management of groundwater is the ability to model the movement of fluids and contaminants in the subsurface. The purpose of this book is to construct conceptual and mathematical models that can provide the information required for making decisions associated with the management of groundwater resources, and the remediation of contaminated aquifers. The basic approach of this book is to accurately describe the underlying physics of groundwater flow and solute transport in heterogeneous porous media, starting at the microscopic level, and to rigorously derive their mathematical representation at the macroscopic levels. The well-posed, macroscopic mathematical models are formulated for saturated, single phase flow, as well as for unsaturated and multiphase flow, and for the transport of single and multiple chemical species. Numerical models are presented and computer codes are reviewed, as tools for solving the models. The problem of seawater intrusion into coastal aquifers is examined and modeled. The issues of uncertainty in model input data and output are addressed. The book concludes with a chapter on the management of groundwater resources. Although one of the main objectives of this book is to construct mathematical models, the amount of mathematics required is kept minimal.

Download or read book Fluid Mechanics and the SPH Method written by Damien Violeau and published by Oxford University Press. This book was released on 2012-05-03 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the SPH method for fluid modelling from a theoretical and applied viewpoint. It explains the foundations of the method, from physical principles, and will help researchers, students, and engineers to understand how the method should be used and why it works well.

Download or read book Numerical Methods for Problems with Moving Fronts written by Bruce A. Finlayson and published by Bruce Alan Finlayson. This book was released on 1992 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Vortex Methods written by Georges-Henri Cottet and published by Cambridge University Press. This book was released on 2008-04-24 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vortex methods have matured in recent years, offering an interesting alternative to finite difference and spectral methods for high resolution numerical solutions of the Navier Stokes equations. In the past three decades, research into the numerical analysis aspects of vortex methods has provided a solid mathematical background for understanding the accuracy and stability of the method. At the same time vortex methods retain their appealing physical character, which was the motivation for their introduction. This book presents and analyzes vortex methods as a tool for the direct numerical simulation of impressible viscous flows. It will interest graduate students and researchers in numerical analysis and fluid mechanics and also serve as an ideal textbook for courses in fluid dynamics.

Download or read book Ocean Wave Modeling written by The SWAMP Group and published by Springer Science & Business Media. This book was released on 2013-11-22 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Early in 1979, a group of wave researchers proposed a wave model inter comparison study to clarify the interrelations existing among the various wave models which have been developed in past years for real-time wave forecasting, wave statistics compilations, or hindcast case studies. The idea was immediately welcomed by the wave modeling community, and, finally, nine wave modeling groups from the United States, Japan, and Europe participated in the exercise. The principal results of this work are presented here jointly by the Sea Wave Modeling Project (swAMP) Group (the members of which are listed in Appendix A). Descriptions of the models used in the study are given in Part II of this volume. A more complete documentation of the entire set of numerical experiments is given in Part 2 of the Sea Wave Modeling Project (SWAMP group, 1982). The main purpose of the intercomparison study was to test our present understanding of the physics of . wind-generated surface waves from the viewpoint of wave modeling. Specifically, we wished to clarify the basic interdependence between understanding the physics of surface waves, repre senting the physics numerically, and predicting quantitatively the detailed space-time evolution of a two-dimensional surface wave spectrum for a given wind field. It was not our intent to carry out a model competition. In this sense there were no winners or losers: all models could claim specific strong points, and all displayed weaknesses in some areas.

Download or read book Proceedings of the Topical Meeting on Emergency Preparedness and Response written by and published by . This book was released on 1999 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Print vol. for 1999- contains abstracts of proceedings, with full text of proceedings on CD-ROM.

Download or read book Smoothed Particle Hydrodynamics written by Gui-Rong Liu and published by World Scientific. This book was released on 2003 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first-ever book on smoothed particle hydrodynamics (SPH) and its variations, covering the theoretical background, numerical techniques, code implementation issues, and many novel and interesting applications. It contains many appealing and practical examples, including free surface flows, high explosive detonation and explosion, underwater explosion and water mitigation of explosive shocks, high velocity impact and penetration, and multiple scale simulations coupled with the molecular dynamics method. An SPH source code is provided and coupling of SPH and molecular dynamics is discussed for multiscale simulation, making this a friendly book for readers and SPH users.

Download or read book The Finite Volume Method in Computational Fluid Dynamics written by F. Moukalled and published by Springer. This book was released on 2015-08-13 with total page 799 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook explores both the theoretical foundation of the Finite Volume Method (FVM) and its applications in Computational Fluid Dynamics (CFD). Readers will discover a thorough explanation of the FVM numerics and algorithms used for the simulation of incompressible and compressible fluid flows, along with a detailed examination of the components needed for the development of a collocated unstructured pressure-based CFD solver. Two particular CFD codes are explored. The first is uFVM, a three-dimensional unstructured pressure-based finite volume academic CFD code, implemented within Matlab. The second is OpenFOAM®, an open source framework used in the development of a range of CFD programs for the simulation of industrial scale flow problems. With over 220 figures, numerous examples and more than one hundred exercise on FVM numerics, programming, and applications, this textbook is suitable for use in an introductory course on the FVM, in an advanced course on numerics, and as a reference for CFD programmers and researchers.

Download or read book Micropolar Fluids written by Grzegorz Lukaszewicz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micropolar fluids are fluids with microstructure. They belong to a class of fluids with nonsymmetric stress tensor that we shall call polar fluids, and include, as a special case, the well-established Navier-Stokes model of classical fluids that we shall call ordinary fluids. Physically, micropolar fluids may represent fluids consisting of rigid, randomly oriented (or spherical) particles suspended in a viscous medium, where the deformation of fluid particles is ignored. The model of micropolar fluids introduced in [65] by C. A. Eringen is worth studying as a very well balanced one. First, it is a well-founded and significant generalization of the classical Navier-Stokes model, covering, both in theory and applications, many more phenomena than the classical one. Moreover, it is elegant and not too complicated, in other words, man ageable to both mathematicians who study its theory and physicists and engineers who apply it. The main aim of this book is to present the theory of micropolar fluids, in particular its mathematical theory, to a wide range of readers. The book also presents two applications of micropolar fluids, one in the theory of lubrication and the other in the theory of porous media, as well as several exact solutions of particular problems and a numerical method. We took pains to make the presentation both clear and uniform.

Download or read book Symmetry and Fluid Mechanics written by Rahmat Ellahi and published by MDPI. This book was released on 2020-03-25 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1980s, attention has increased in the research of fluid mechanics due to its wide application in industry and phycology. Major advances have occurred in the modeling of key topics such Newtonian and non-Newtonian fluids, nanoparticles, thermal management, and physiological fluid phenomena in biological systems, which have been published in this Special Issue on symmetry and fluid mechanics for Symmetry. Although, this book is not a formal textbook, it will be useful for university teachers, research students, and industrial researchers and for overcoming the difficulties that occur when considering the nonlinear governing equations. For such types of equations, obtaining an analytic or even a numerical solution is often more difficult. This book addresses this challenging job by outlining the latest techniques. In addition, the findings of the simulation are logically realistic and meet the standard of sufficient scientific value.

Download or read book Computational Fluid Dynamics written by Jiyuan Tu and published by Butterworth-Heinemann. This book was released on 2012-11-07 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to CFD fundamentals and using commercial CFD software to solve engineering problems, designed for the wide variety of engineering students new to CFD, and for practicing engineers learning CFD for the first time. Combining an appropriate level of mathematical background, worked examples, computer screen shots, and step by step processes, this book walks the reader through modeling and computing, as well as interpreting CFD results. The first book in the field aimed at CFD users rather than developers. New to this edition: A more comprehensive coverage of CFD techniques including discretisation via finite element and spectral element as well as finite difference and finite volume methods and multigrid method. Coverage of different approaches to CFD grid generation in order to closely match how CFD meshing is being used in industry. Additional coverage of high-pressure fluid dynamics and meshless approach to provide a broader overview of the application areas where CFD can be used. 20% new content .

Download or read book Activated Sludge Models written by The IWA Task Group on Mathematical Modelling for Design and Operation of Biological Wastewater Treatment and published by IWA Publishing. This book was released on 2000-05-31 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has been produced to give a total overview of the Activated Sludge Model (ASM) family at the start of 2000 and to give the reader easy access to the different models in their original versions. It thus presents ASM1, ASM2, ASM2d and ASM3 together for the first time. Modelling of activated sludge processes has become a common part of the design and operation of wastewater treatment plants. Today models are being used in design, control, teaching and research. Contents ASM3: Introduction, Comparison of ASM1 and ASM3, ASM3: Definition of compounds in the model, ASM3: Definition of processes in the Model, ASM3: Stoichiometry, ASM3: Kinetics, Limitations of ASM3, Aspects of application of ASM3, ASM3C: A Carbon based model, Conclusion ASM 2d: Introduction, Conceptual Approach, ASM 2d, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Limitations, Conclusion ASM 2: Introduction, ASM 2, Typical Wastewater Characteristics and Kinetic and Stoichiometric Constants, Wastewater Characterization for Activated Sludge Processes, Calibration of the ASM 2, Model Limitations, Conclusion, Bibliography ASM 1: Introduction, Method of Model Presentation, Model Incorporating Carbon Oxidation Nitrification and Denitrification, Characterization of Wastewater and Estimation of Parameter Values, Typical Parameter Ranges, Default Values, and Effects of Environmental Factors, Assumptions, Restrictions and Constraints, Implementation of the Activated Sludge Model Scientific and Technical Report No.9

Download or read book Reactive Transport in Porous Media written by Peter C. Lichtner and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-12-17 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 34 of Reviews in Mineralogy focuses on methods to describe the extent and consequences of reactive flow and transport in natural subsurface systems. Since the field of reactive transport within the Earth Sciences is a highly multidisciplinary area of research, including geochemistry, geology, physics, chemistry, hydrology, and engineering, this book is an attempt to some extent bridge the gap between these different disciplines. This volume contains the contributions presented at a short course held in Golden, Colorado, October 25-27, 1996 in conjunction with the Mineralogical Society of America's (MSA) Annual Meeting with the Geological Society of America in Denver, Colorado.

Download or read book Computational Engineering Introduction to Numerical Methods written by Michael Schäfer and published by Springer Nature. This book was released on 2021-07-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical simulation methods in all engineering disciplines gains more and more importance. The successful and efficient application of such tools requires certain basic knowledge about the underlying numerical techniques. The text gives a practice-oriented introduction in modern numerical methods as they typically are applied in mechanical, chemical, or civil engineering. Problems from heat transfer, structural mechanics, and fluid mechanics constitute a thematical focus of the text. For the basic understanding of the topic aspects of numerical mathematics, natural sciences, computer science, and the corresponding engineering area are simultaneously important. Usually, the necessary information is distributed in different textbooks from the individual disciplines. In the present text the subject matter is presented in a comprehensive multidisciplinary way, where aspects from the different fields are treated insofar as it is necessary for general understanding. Overarching aspects and important questions related to accuracy, efficiency, and cost effectiveness are discussed. The topics are presented in an introductory manner, such that besides basic mathematical standard knowledge in analysis and linear algebra no further prerequisites are necessary. The book is suitable either for self-study or as an accompanying textbook for corresponding lectures. It can be useful for students of engineering disciplines as well as for computational engineers in industrial practice.

Download or read book The Finite Element Method Set written by O. C. Zienkiewicz and published by Elsevier. This book was released on 2005-11-25 with total page 1863 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sixth editions of these seminal books deliver the most up to date and comprehensive reference yet on the finite element method for all engineers and mathematicians. Renowned for their scope, range and authority, the new editions have been significantly developed in terms of both contents and scope. Each book is now complete in its own right and provides self-contained reference; used together they provide a formidable resource covering the theory and the application of the universally used FEM. Written by the leading professors in their fields, the three books cover the basis of the method, its application to solid mechanics and to fluid dynamics.* This is THE classic finite element method set, by two the subject's leading authors * FEM is a constantly developing subject, and any professional or student of engineering involved in understanding the computational modelling of physical systems will inevitably use the techniques in these books * Fully up-to-date; ideal for teaching and reference