Download or read book Electron Dynamics of Diode Regions written by Charles K. Birdsall and published by Elsevier. This book was released on 1966-01-01 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron Dynamics of Diode Regions describes the model construction and analysis of motion of charged particles of diode regions in time-varying fields. The models analyzed are simplified versions of parts of practical devices, primarily active microwave devices, tubes, and semiconductor amplifiers, while the most striking results obtained are due to electron inertia and space-charge effects in terms of laboratory observable. This book is composed of seven chapters, and begins with an introduction to the general concepts of time dependent flow, including induced current, the techniques of linearization, calculating variational transit time, and obtaining equivalent circuits. The following chapters present the classical linear analysis, which includes the space-charge effects, with several applications. These chapters also explore the existence of a maximum stable current in a space-charge limited diode. The discussion then shifts to the basics of high velocity, klystron, gap with nonuniform field distributions, and the application of the multicavity klystron. This text further covers the analysis and examples of crossed-field gaps. The final chapters deal with the fundamentals of velocity and current distributions obtained from common electron emitters, with some attempt to show how the multivelocity streams evolve into single-velocity equivalents needed for the methods of earlier chapters. Results of applying the Lagrangian starting analysis to semiconductor diode regions, necessarily from a new equation of motion, are also provided. This book is intended for graduate courses, seminars, and research studies.
Download or read book Plasma Physics via Computer Simulation written by C.K. Birdsall and published by CRC Press. This book was released on 2018-10-08 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Divided into three main parts, the book guides the reader to an understanding of the basic concepts in this fascinating field of research. Part 1 introduces you to the fundamental concepts of simulation. It examines one-dimensional electrostatic codes and electromagnetic codes, and describes the numerical methods and analysis. Part 2 explores the mathematics and physics behind the algorithms used in Part 1. In Part 3, the authors address some of the more complicated simulations in two and three dimensions. The book introduces projects to encourage practical work Readers can download plasma modeling and simulation software — the ES1 program — with implementations for PCs and Unix systems along with the original FORTRAN source code. Now available in paperback, Plasma Physics via Computer Simulation is an ideal complement to plasma physics courses and for self-study.
Download or read book Laser Plasma Interactions written by Dino A. Jaroszynski and published by CRC Press. This book was released on 2009-03-27 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Solid Compendium of Advanced Diagnostic and Simulation ToolsExploring the most exciting and topical areas in this field, Laser-Plasma Interactions focuses on the interaction of intense laser radiation with plasma. After discussing the basic theory of the interaction of intense electromagnetic radiation fields with matter, the book covers three ap
Download or read book Space Plasma Simulation written by Jörg Büchner and published by Springer Science & Business Media. This book was released on 2003-04-09 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is twofold: to provide an introduction for newcomers to state of the art computer simulation techniques in space plasma physics and an overview of current developments. Computer simulation has reached a stage where it can be a highly useful tool for guiding theory and for making predictions of space plasma phenomena, ranging from microscopic to global scales. The various articles are arranged, as much as possible, according to the - derlying simulation technique, starting with the technique that makes the least number of assumptions: a fully kinetic approach which solves the coupled set of Maxwell’s equations for the electromagnetic ?eld and the equations of motion for a very large number of charged particles (electrons and ions) in this ?eld. Clearly, this is also the computationally most demanding model. Therefore, even with present day high performance computers, it is the most restrictive in terms of the space and time domain and the range of particle parameters that can be covered by the simulation experiments. It still makes sense, therefore, to also use models, which due to their simp- fying assumptions, seem less realistic, although the e?ect of these assumptions on the outcome of the simulation experiments needs to be carefully assessed.
Download or read book Modeling of Collisions written by A. Decoster and published by Elsevier Masson. This book was released on 1998 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Physics Reference Library written by Christian W. Fabjan and published by Springer Nature. This book was released on 2020 with total page 1083 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second open access volume of the handbook series deals with detectors, large experimental facilities and data handling, both for accelerator and non-accelerator based experiments. It also covers applications in medicine and life sciences. A joint CERN-Springer initiative, the "Particle Physics Reference Library" provides revised and updated contributions based on previously published material in the well-known Landolt-Boernstein series on particle physics, accelerators and detectors (volumes 21A, B1,B2,C), which took stock of the field approximately one decade ago. Central to this new initiative is publication under full open access
Download or read book Modern Methods in Collisional Radiative Modeling of Plasmas written by Yuri Ralchenko and published by Springer. This book was released on 2016-02-25 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a compact yet comprehensive overview of recent developments in collisional-radiative (CR) modeling of laboratory and astrophysical plasmas. It describes advances across the entire field, from basic considerations of model completeness to validation and verification of CR models to calculation of plasma kinetic characteristics and spectra in diverse plasmas. Various approaches to CR modeling are presented, together with numerous examples of applications. A number of important topics, such as atomic models for CR modeling, atomic data and its availability and quality, radiation transport, non-Maxwellian effects on plasma emission, ionization potential lowering, and verification and validation of CR models, are thoroughly addressed. Strong emphasis is placed on the most recent developments in the field, such as XFEL spectroscopy. Written by leading international research scientists from a number of key laboratories, the book offers a timely summary of the most recent progress in this area. It will be a useful and practical guide for students and experienced researchers working in plasma spectroscopy, spectra simulations, and related fields.
Download or read book High Performance Computing in Science and Engineering 08 written by Wolfgang E. Nagel and published by Springer Science & Business Media. This book was released on 2009-01-10 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The discussions and plans on all scienti?c, advisory, and political levels to realize an even larger “European Supercomputer” in Germany, where the hardware costs alone will be hundreds of millions Euro – much more than in the past – are getting closer to realization. As part of the strategy, the three national supercomputing centres HLRS (Stuttgart), NIC/JSC (Julic ̈ h) and LRZ (Munich) have formed the Gauss Centre for Supercomputing (GCS) as a new virtual organization enabled by an agreement between the Federal Ministry of Education and Research (BMBF) and the state ministries for research of Baden-Wurttem ̈ berg, Bayern, and Nordrhein-Westfalen. Already today, the GCS provides the most powerful high-performance computing - frastructure in Europe. Through GCS, HLRS participates in the European project PRACE (Partnership for Advances Computing in Europe) and - tends its reach to all European member countries. These activities aligns well with the activities of HLRS in the European HPC infrastructure project DEISA (Distributed European Infrastructure for Supercomputing Appli- tions) and in the European HPC support project HPC-Europa. Beyond that, HLRS and its partners in the GCS have agreed on a common strategy for the installation of the next generation of leading edge HPC hardware over the next ?ve years. The University of Stuttgart and the University of Karlsruhe have furth- more agreed to bundle their competences and resources.
Download or read book Ion Solid Interactions written by Michael Nastasi and published by Cambridge University Press. This book was released on 1996-03-29 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive guide to an important materials science technique for students and researchers.
Download or read book Computer Simulation Using Particles written by R.W Hockney and published by CRC Press. This book was released on 2021-03-24 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer simulation of systems has become an important tool in scientific research and engineering design, including the simulation of systems through the motion of their constituent particles. Important examples of this are the motion of stars in galaxies, ions in hot gas plasmas, electrons in semiconductor devices, and atoms in solids and liquids. The behavior of the system is studied by programming into the computer a model of the system and then performing experiments with this model. New scientific insight is obtained by observing such computer experiments, often for controlled conditions that are not accessible in the laboratory. Computer Simulation using Particles deals with the simulation of systems by following the motion of their constituent particles. This book provides an introduction to simulation using particles based on the NGP, CIC, and P3M algorithms and the programming principles that assist with the preparations of large simulation programs based on the OLYMPUS methodology. It also includes case study examples in the fields of astrophysics, plasmas, semiconductors, and ionic solids as well as more detailed mathematical treatment of the models, such as their errors, dispersion, and optimization. This resource will help you understand how engineering design can be assisted by the ability to predict performance using the computer model before embarking on costly and time-consuming manufacture.
Download or read book Kinetic Particle in cell Simulations of Transport in a Tokamak Scrape off Layer written by Richard Joseph Procassini and published by . This book was released on 1990 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Particle in Cell Methods written by Yu. N. Grigoryev and published by Walter de Gruyter. This book was released on 2012-02-13 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Plasma Discharges and Materials Processing written by Michael A. Lieberman and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 795 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Thorough Update of the Industry Classic on Principles of Plasma Processing The first edition of Principles of Plasma Discharges and Materials Processing, published over a decade ago, was lauded for its complete treatment of both basic plasma physics and industrial plasma processing, quickly becoming the primary reference for students and professionals. The Second Edition has been carefully updated and revised to reflect recent developments in the field and to further clarify the presentation of basic principles. Along with in-depth coverage of the fundamentals of plasma physics and chemistry, the authors apply basic theory to plasma discharges, including calculations of plasma parameters and the scaling of plasma parameters with control parameters. New and expanded topics include: * Updated cross sections * Diffusion and diffusion solutions * Generalized Bohm criteria * Expanded treatment of dc sheaths * Langmuir probes in time-varying fields * Electronegative discharges * Pulsed power discharges * Dual frequency discharges * High-density rf sheaths and ion energy distributions * Hysteresis and instabilities * Helicon discharges * Hollow cathode discharges * Ionized physical vapor deposition * Differential substrate charging With new chapters on dusty plasmas and the kinetic theory of discharges, graduate students and researchers in the field of plasma processing should find this new edition more valuable than ever.
Download or read book Proceedings of the Sixth International Conference on Mathematics and Computing written by Debasis Giri and published by Springer Nature. This book was released on 2020-12-10 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features selected papers from the 6th International Conference on Mathematics and Computing (ICMC 2020), organized by Sikkim University, Gangtok, Sikkim, India, during September 2020. It covers recent advances in the field of mathematics, statistics, and scientific computing. The book presents innovative work by leading academics, researchers, and experts from industry.
Download or read book Introduction to Dusty Plasma Physics written by P.K Shukla and published by CRC Press. This book was released on 2015-05-06 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Dusty Plasma Physics contains a detailed description of the occurrence of dusty plasmas in our Solar System, the Earth's mesosphere, and in laboratory discharges. The book illustrates numerous mechanisms for charging dust particles and provides studies of the grain dynamics under the influence of forces that are common in dusty plas
Download or read book Modeling of Electron Electron Collisions for Particle in Cell Simulations written by Danilo D'Andrea and published by . This book was released on 2006 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kappa Distributions written by George Livadiotis and published by Elsevier. This book was released on 2017-04-19 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kappa Distributions: Theory and Applications in Plasmas presents the theoretical developments of kappa distributions, their applications in plasmas, and how they affect the underpinnings of our understanding of space and plasma physics, astrophysics, and statistical mechanics/thermodynamics. Separated into three major parts, the book covers theoretical methods, analytical methods in plasmas, and applications in space plasmas. The first part of the book focuses on basic aspects of the statistical theory of kappa distributions, beginning with their connection to the solid backgrounds of non-extensive statistical mechanics. The book then moves on to plasma physics, and is devoted to analytical methods related to kappa distributions on various basic plasma topics, spanning linear/nonlinear plasma waves, solitons, shockwaves, and dusty plasmas. The final part of the book deals with applications in space plasmas, focusing on applications of theoretical and analytical developments in space plasmas from the heliosphere and beyond, in other astrophysical plasmas. Kappa Distributions is ideal for space, plasma, and statistical physicists; geophysicists, especially of the upper atmosphere; Earth and planetary scientists; and astrophysicists. - Answers important questions, such as how plasma waves are affected by kappa distributions and how solar wind, magnetospheres, and other geophysical, space, and astrophysical plasmas can be modeled using kappa distributions - Presents the features of kappa distributions in the context of plasmas, including how kappa indices, temperatures, and densities vary among the species populations in different plasmas - Provides readers with the information they need to decide which specific formula of kappa distribution should be used for a certain occasion and system (toolbox)
