Download or read book Modeling Identification and Control of Robots written by Wisama Khalil and published by CRC Press. This book was released on 2002 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling Identification and Control of Robots written by W. Khalil and published by Butterworth-Heinemann. This book was released on 2004-07-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by two of Europe’s leading robotics experts, this book provides the tools for a unified approach to the modelling of robotic manipulators, whatever their mechanical structure. No other publication covers the three fundamental issues of robotics: modelling, identification and control. It covers the development of various mathematical models required for the control and simulation of robots. · World class authority· Unique range of coverage not available in any other book· Provides a complete course on robotic control at an undergraduate and graduate level
Download or read book Epz Modeling Identification and Control of Robots written by W. Khalil and published by . This book was released on 2005-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Kinematic Modeling Identification and Control of Robotic Manipulators written by Henry W. Stone and published by Springer Science & Business Media. This book was released on 1987-09-30 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this dissertation is to advance the state-of-the-art in the kinematic modeling, identification, and control of robotic manipulators with rigid links in an effort to improve robot kinematic performance. The positioning accuracy of commercially-available industrial robotic manipulators depends upon a kinematic model which describes the robot geometry in a parametric form. Manufacturing error in the machining and assembly of manipulators lead to discrepancies between the design parameters and the physical structure. Improving the kinematic perfor mance thus requires the identification of the actual kinematic parameters of each individual robot. The identified kinematic parameters are referred to as the arm signature. Existing robot kinematic models, such as the Denavit-Hartenberg model, are not directly applicable to kinematic parameter identification. In this dissertation we introduce a new kinematic model, called the 5-Model, which is applicable to kinematic parameter identification, and use it as the foundation for our development of a general technique for identifying the kinematic parameters of any robot with rigid links.
Download or read book Kinematic Modeling Identification and Control of Robotic Manipulators written by Henry W. Stone and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this dissertation is to advance the state-of-the-art in the kinematic modeling, identification, and control of robotic manipulators with rigid links in an effort to improve robot kinematic performance. The positioning accuracy of commercially-available industrial robotic manipulators depends upon a kinematic model which describes the robot geometry in a parametric form. Manufacturing error in the machining and assembly of manipulators lead to discrepancies between the design parameters and the physical structure. Improving the kinematic perfor mance thus requires the identification of the actual kinematic parameters of each individual robot. The identified kinematic parameters are referred to as the arm signature. Existing robot kinematic models, such as the Denavit-Hartenberg model, are not directly applicable to kinematic parameter identification. In this dissertation we introduce a new kinematic model, called the 5-Model, which is applicable to kinematic parameter identification, and use it as the foundation for our development of a general technique for identifying the kinematic parameters of any robot with rigid links.
Download or read book Robotics written by Bruno Siciliano and published by Springer Science & Business Media. This book was released on 2010-08-20 with total page 644 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the successful Modelling and Control of Robot Manipulators by Sciavicco and Siciliano (Springer, 2000), Robotics provides the basic know-how on the foundations of robotics: modelling, planning and control. It has been expanded to include coverage of mobile robots, visual control and motion planning. A variety of problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained. The text includes coverage of fundamental topics like kinematics, and trajectory planning and related technological aspects including actuators and sensors. To impart practical skill, examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, end-of-chapter exercises are proposed, and the book is accompanied by an electronic solutions manual containing the MATLAB® code for computer problems; this is available free of charge to those adopting this volume as a textbook for courses.
Download or read book Modelling and Control of Robot Manipulators written by Lorenzo Sciavicco and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental and technological topics are blended uniquely and developed clearly in nine chapters with a gradually increasing level of complexity. A wide variety of relevant problems is raised throughout, and the proper tools to find engineering-oriented solutions are introduced and explained, step by step. Fundamental coverage includes: Kinematics; Statics and dynamics of manipulators; Trajectory planning and motion control in free space. Technological aspects include: Actuators; Sensors; Hardware/software control architectures; Industrial robot-control algorithms. Furthermore, established research results involving description of end-effector orientation, closed kinematic chains, kinematic redundancy and singularities, dynamic parameter identification, robust and adaptive control and force/motion control are provided. To provide readers with a homogeneous background, three appendices are included on: Linear algebra; Rigid-body mechanics; Feedback control. To acquire practical skill, more than 50 examples and case studies are carefully worked out and interwoven through the text, with frequent resort to simulation. In addition, more than 80 end-of-chapter exercises are proposed, and the book is accompanied by a solutions manual containing the MATLAB code for computer problems; this is available from the publisher free of charge to those adopting this work as a textbook for courses.
Download or read book CONTROL SYSTEMS ROBOTICS AND AUTOMATION Volume VI written by Heinz D. Unbehauen and published by EOLSS Publications. This book was released on 2009-10-11 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Encyclopedia of Control Systems, Robotics, and Automation is a component of the global Encyclopedia of Life Support Systems EOLSS, which is an integrated compendium of twenty one Encyclopedias. This 22-volume set contains 240 chapters, each of size 5000-30000 words, with perspectives, applications and extensive illustrations. It is the only publication of its kind carrying state-of-the-art knowledge in the fields of Control Systems, Robotics, and Automation and is aimed, by virtue of the several applications, at the following five major target audiences: University and College Students, Educators, Professional Practitioners, Research Personnel and Policy Analysts, Managers, and Decision Makers and NGOs
Download or read book Robot Dynamics And Control written by Mark W Spong and published by John Wiley & Sons. This book was released on 2008-08-04 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This self-contained introduction to practical robot kinematics and dynamics includes a comprehensive treatment of robot control. It provides background material on terminology and linear transformations, followed by coverage of kinematics and inverse kinematics, dynamics, manipulator control, robust control, force control, use of feedback in nonlinear systems, and adaptive control. Each topic is supported by examples of specific applications. Derivations and proofs are included in many cases. The book includes many worked examples, examples illustrating all aspects of the theory, and problems.
Download or read book Modelling and Identification in Robotics written by Krzysztof R. Kozlowski and published by Springer. This book was released on 2012-10-11 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the use and relevance of robotics for countless scientific purposes grows all the time, research into the many diverse elements of the subject becomes ever more important and in demand. This volume examines in depth the most topical, complex issues of modelling and identification in robotics. The book is divided into three main parts. The !first part is devoted to robot dynamics modelling and identification of robot and load parameters, incorporating friction torques, discussing identification schemes, and presenting simulations and experiment al results of robot and load dynamic parameters identification. A general concept of robot programming language for research and educational purposes is examined and there is a detailed outline of its basic structures along with hardware requirements, which both constitute an open robot controller architecture. Finally a hybrid controller is derived, and several experimental results of this system are outlined. This impressive discussion of the topic covers both the theoretical and practical, illustrated throughout by examples and experimental results, and will be of value to anyone researching or practising within the field of robotics, automation and system i dentification or to control engineers.
Download or read book Robot Manipulators written by Etienne Dombre and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent research results on modeling and control of robot manipulators. Chapter 1 gives unified tools to derive direct and inverse geometric, kinematic and dynamic models of serial robots and addresses the issue of identification of the geometric and dynamic parameters of these models. Chapter 2 describes the main features of serial robots, the different architectures and the methods used to obtain direct and inverse geometric, kinematic and dynamic models, paying special attention to singularity analysis. Chapter 3 introduces global and local tools for performance analysis of serial robots. Chapter 4 presents an original optimization technique for point-to-point trajectory generation accounting for robot dynamics. Chapter 5 presents standard control techniques in the joint space and task space for free motion (PID, computed torque, adaptive dynamic control and variable structure control) and constrained motion (compliant force-position control). In Chapter 6, the concept of vision-based control is developed and Chapter 7 is devoted to specific issue of robots with flexible links. Efficient recursive Newton-Euler algorithms for both inverse and direct modeling are presented, as well as control methods ensuring position setting and vibration damping.
Download or read book Modeling Identification and Control for Cyber Physical Systems Towards Industry 4 0 written by Paolo Mercorelli and published by Elsevier. This book was released on 2024-01-19 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling, Identification, and Control for Cyber-Physical Systems Towards Industry 4.0 studies and analyzes the role of algorithms in identifying and controlling such a system towards Industry 4.0, which is the digital transformation of manufacturing and related industries and value creation processes. This book focuses on the conception and implementation of intelligent algorithms. It will help readers who work on sensors, virtual sensors, actuators and virtual actuators embedded systems, network infrastructures, servers with computing and storage capacity, autonomous computing software, real-time data processing, and database graphical user interfaces wireless networking technologies. Cyber-Physical Systems are network components that coordinate physical actions with each other. These autonomous systems perceive their surroundings using virtual sensors and actively influence them via virtual actuators. Adaptable and continuously evolving, these systems free up skilled workers to perform complex tasks, avoiding productivity loss and re-work. Provides the new and cutting-edge research and development and a series of guidance procedures for potential applications from academic research to industrial R&D Focuses on the conception and implementation of intelligent algorithms Covers a wide spectrum of topics, including sensors, virtual sensors, actuators and virtual actuators embedded systems, network infrastructures, servers with computing and storage capacity, autonomous computing software, real-time data processing, and database graphical user interfaces wireless networking technologies
Download or read book Robot Modeling and Control written by Mark W. Spong and published by John Wiley & Sons. This book was released on 2020-03-30 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: A New Edition Featuring Case Studies and Examples of the Fundamentals of Robot Kinematics, Dynamics, and Control In the 2nd Edition of Robot Modeling and Control, students will cover the theoretical fundamentals and the latest technological advances in robot kinematics. With so much advancement in technology, from robotics to motion planning, society can implement more powerful and dynamic algorithms than ever before. This in-depth reference guide educates readers in four distinct parts; the first two serve as a guide to the fundamentals of robotics and motion control, while the last two dive more in-depth into control theory and nonlinear system analysis. With the new edition, readers gain access to new case studies and thoroughly researched information covering topics such as: ● Motion-planning, collision avoidance, trajectory optimization, and control of robots ● Popular topics within the robotics industry and how they apply to various technologies ● An expanded set of examples, simulations, problems, and case studies ● Open-ended suggestions for students to apply the knowledge to real-life situations A four-part reference essential for both undergraduate and graduate students, Robot Modeling and Control serves as a foundation for a solid education in robotics and motion planning.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Theory of Robot Control written by Carlos Canudas de Wit and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: A study of the latest research results in the theory of robot control, structured so as to echo the gradual development of robot control over the last fifteen years. In three major parts, the editors deal with the modelling and control of rigid and flexible robot manipulators and mobile robots. Most of the results on rigid robot manipulators in part I are now well established, while for flexible manipulators in part II, some problems still remain unresolved. Part III deals with the control of mobile robots, a challenging area for future research. The whole is rounded off with an appendix reviewing basic definitions and the mathematical background for control theory. The particular combination of topics makes this an invaluable source of information for both graduate students and researchers.
Download or read book Modeling and Nonlinear Robust Control of Delta Like Parallel Kinematic Manipulators written by Jonatan Martin Escorcia Hernandez and published by Elsevier. This book was released on 2022-11-29 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Nonlinear Robust Control of Delta-Like Parallel Kinematic Manipulators deals with the modeling and control of parallel robots. The book's content will benefit students, researchers and engineers in robotics by providing a simplified methodology to obtain the dynamic model of parallel robots with a delta-type architecture. Moreover, this methodology is compatible with the real-time implementation of model-based and robust control schemes. And, it can easily extend the proposed robust control solutions to other robotic architectures. Introduces a novel parallel robot designed for machining operations called SPIDER4 Presents a mathematical formulation of the kinematic and dynamic models of SPIDER4 Offers validation of the computed mathematical models and designed controllers through real-time experiments under different operating conditions
Download or read book Modelling and Identification in Robotics written by Krzysztof Kozłowski and published by Springer. This book was released on 1998-03-25 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the use and relevance of robotics for countless scientific purposes grows all the time, research into the many diverse elements of the subject becomes ever more important and in demand. This volume examines in depth the most topical, complex issues of modelling and identification in robotics. The book is divided into three main parts: Robot dynamics modelling and identification of robot and load parameters, incorporating friction torques, discussing identification schemes, and presenting simulations and experimental results of robot and load dynamic parameters identification. A general concept of robot programming language for research and educational purposes is examined and there is a detailed outline of its basic structures along with hardware requirements, which both constitute an open robot controller architecture. A hybrid controller is derived, and several experimental results of this system are outlined. This impressive discussion of the topic covers both the theoretical and practical, illustrated throughout by examples and experimental results, and will be of value to anyone researching or practising within the field of robotics, automation and system identification, or to control engineers. Advances in Industrial Control aims to report and encourage the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.
